582664
9
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
POWX0561 EN
Copyright © 2014 VARO P a g e | 9 www.varo.com
10.5 Straight cuts (90° cut)
Loosen both rotary knobs (8) and swivel the saw to 0° position on the scale. Tighten the
rotary knobs again.
Turn the selector switch (17) to plunge cut function.
Set the desired plunge depth. Ensure that the guide rail depth adjustment stopper (10) is
up when using the saw without guide rail.
To switch on the saw press the switch lock (2) and the ON/OFF switch (1) and push the
motor down. Guide the saw forward to cut.
10.6 Miter cuts (up to 48°) (Fig. 6)
First loosen both rotary knobs (8) and swivel the plunge saw to the desired graduation.
Tighten the rotary knobs again.
Switch the plunge saw on.
Turn the selector switch (17) to plunge cut function.
Set the desired plunge depth. Ensure that the guide rail depth adjustment stopper (10) is
in up position when using the saw without guide rail.
To switch the saw on press the switch lock (2) and the ON/OFF switch (1) and push the
motor down. Guide the saw forward to cut.
The cut indicator (14) shows the cutting path for 90° and 45° miter cuts (without using the
guide rail).
10.7 Marked cutting
Turn the selector switch (17) to marked cut function.
Press the switch lock (2) and push the motor down. The casing stops in 2.5 mm cutting
depth position.
Note: The marking line should be aligned with cutting line A (0 mark).
10.8 Plunge cuts
For a straight cut first loosen both rotary knobs (8) and swivel the plunge saw to 0°
position on the scale. Tighten the rotary knobs again.
Turn the selector switch (17) to plunge cut function.
Set the desired plunge depth. Ensure that the guide rail depth adjustment stopper (10) is
up if not using the guide rail.
Press the switch lock (2) and the ON/OFF switch (1) and push the motor down. Guide the
saw forward to cut.
Note: To prevent the saw from kicking back during plunge cuts follow these steps:
Always place the plunge saw with the rear edge of the base plate (5) against a fixed limit
stop.
Hold the plunge saw in both hands and slowly lower the saw blade.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX0561 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX0561 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWX0561

Powerplus POWX0561 Gebruiksaanwijzing - Nederlands - 15 pagina's

Powerplus POWX0561 Gebruiksaanwijzing - Deutsch - 15 pagina's

Powerplus POWX0561 Gebruiksaanwijzing - Français - 15 pagina's

Powerplus POWX0561 Aanvulling / aanpassing - Alle talen - 5 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info