POWEBG7520 EN
Copyright © 2018 VARO P a g e | 8 www.varo.com
a tool with a switch that does not actuate properly can lead to loss of
control and serious personal injury.
11 BLOWING
Hold the blower firmly with a hand and perform the blowing operation by moving it from side to
side slowly.
When blowing around a building, a big object or a vehicle, direct the nozzle away from them.
When performing an operation in a corner, start from the corner and then move to wide area.
12 CLEANING AND MAINTENANCE
12.1 Cleaning
▪ Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪ Regularly clean the machine housing with a soft cloth, preferably after each use.
▪ Keep the ventilation slots free from dust and dirt.
▪ If the dirt does not come off use a soft cloth moistened with soapy water.
▪ Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
12.2 Maintenance
▪ Our machines have been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper machine care
and regular cleaning.
▪ In order to maintain battery capacity, we recommend the battery to be completely
discharged every one month and fully recharged again .Only store with a fully charged
battery and top-up the charge from time to time if stored for a long time. Store in a dry and
frost-free place, the ambient temperature should not exceed 40°C.
13 TECHNICAL DETAILS
15 WARRANTY
▪ This product is warranted for a 24-month period effective from the date of purchase by the
first user.
▪ This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
