795637
8
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
POWDP4050 EN
Copyright © 2021 VARO P a g e | 8 www.varo.com
9 ADJUSTMENTS/SETTINGS
9.1 Remove the blades (Fig. 1 & 2)
Always put on gloves when replacing blades!
Place the tool on a table with the base plate pointing towards you.
Loosen the 3 installation bolts 1/2 rotation anticlockwise with the panner provided.
Press and hold the spring-loaded protective cover, and slide the blade out of its holder
with use of the tip of a spanner/screwdriver.
If one of the blades is damaged, always replace both blades.
9.2 Install the blades (Fig. 3 & 4)
First clean out all chips or foreign material adhering to the drum(a) or blades(b)
Always replace blades with same dimension and weight.
Slide the blade into the blade holder. The blade must be level with the planer’s base plate
The blade must be positioned exactly in the middle of the blade holder.
Tighten the 3 installation bolts.
Always unplug the tool before replacing the cutters.
9.3 Setting the planing depth (Fig. 5)
Plane depth is variable from 0 to 2.0 mm. This is adjustable by rotating the adjustment
knob of cutting depth (2).
As the knob is rotated clockwise from the 0 position the cutting depth will increase from 0
to as much as 2.0 mm.
It is recommended that test cuts are made in scrap wood after each re-adjustment to
make sure the desired amount of wood is being removed by the planer.
Several shallow passes will produce a smoother finish than one deep pass.
9.4 Mounting and setting the parallel guide
The parallel guide assembly is for use when you wish to plane parallel to the work piece.
Secure the parallel guide holder to the left-hand side or right-hand side of the planer using
the wing screw .
Now secure the parallel stop guide rail “T” to the holder using the wing screw and the
knob. The guide rail must always point downwards.
Set the required distance between the guide rail and the work piece.
Tighten the knob on the guide rail.
10 OPERATION
10.1 Switching on and off (Fig. 6)
Before engaging the on/off switch, check the blades are fitted properly.
To switch on the planer, press the lock-off button (5) and push the ON/OFF switch trigger
(4).
When you release the ON/OFF switch trigger, the machine turns off.
10.2 Drive belt replacement (Fig. 7a, 7b)
Remove the belt cover (7) by unscrewing the 3 installation bolts.
Wear gloves, turn the driven pulley by one hand slowly and pull the belt out by another
hand until the belt fallsl out of the pulley.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWDP4050 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWDP4050 in de taal/talen: Engels als bijlage per email.

De handleiding is 0.35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Powerplus POWDP4050

Powerplus POWDP4050 Gebruiksaanwijzing - Nederlands - 13 pagina's

Powerplus POWDP4050 Gebruiksaanwijzing - Deutsch - 13 pagina's

Powerplus POWDP4050 Gebruiksaanwijzing - Français - 13 pagina's

Powerplus POWDP4050 Aanvulling / aanpassing - Alle talen - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info