685364
14
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
INSTALL TANK PICK-UP
After checking for baffles and fuel gauge linkage, pick a spot on fuel tank for the fuel
pick-up tubes (usually top center of tank on end closest to the APU). Apply heavy grease
to spot where hole is to be drilled. The grease will help keep metal shavings out of fuel
tank. Drill a ¼” pilot hole. You may want to use several different drill bit sizes to get up
to the ¾” bit required for the fuel pick-up tube. Once you have a ¾” hole, clean all metal
shavings from the hole. Reapply heavy grease and using the ½” NPT tap the threads for
the fuel pick-up tube. Clean area very thoroughly.
Determine the length needed for the pick-up tube. The recommended length for the
pick-up tube is 3” shorter than the depth of the fuel tank. Cut pick-up tube to length
needed. Apply thread sealant to the threads of the pick-up tube and screw into fuel tank.
Be sure that pick-up tube connections are suitably positioned to allow connecting the fuel
hoses and clamps.
ROUTING AND CONNECTING THE FUEL LINES
Care must be taken when routing the fuel lines. You must route lines so they can
be strapped securely and in a way that they will not come into contact with anything hot,
or any moving components. Suggested routing of fuel lines is as follows: Lines coming
out of the APU, run up into the inside of frame rails. Strap lines either to the backside of
the unit, or at first bend in the frame rail. Run along the inside of the frame rail until you
reach the fuel tank and the fuel pick-up tubes. Be sure that you have no kinks in the line
and that the line is run away from anything abrasive. Strap fuel lines securely with tie
straps or clamps.
Once fuel line is secure, cut the fuel lines to desired length with a hose cutter or
utility knife. Trim the hose loom back approximately 1 ½”. There are 2 different size
hoses. The 5/16 hose is for fuel supply and the 3/16 hose is for fuel return. Place 2 - #4
hose clamps (provided) on the end of the 5/16-fuel line and slip onto the larger of the two
tubes on the fuel pick-up tube. Tighten both clamps on the 5/16-fuel line. Once the
supply line is secure, do the same with the 3/16 return line. Make sure all 4 clamps are
secure.
11
14

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

PowerTech-PT-3000

Zoeken resetten

  • Nieuw aggregaat pt2000 start perfect maar komt geen stroom uit half jaar oud nog nooit gebruikt. Handleiding zoek geraakt. Zit er misschien een zekering? Gesteld op 10-7-2024 om 17:01

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw PowerTech PT-3000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van PowerTech PT-3000 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info