773023
6
Verklein
Vergroot
Pagina terug
1/74
Pagina verder
| 4 | www.polisport.com
1. Turn the child seat upside down as shown in the image. Cut the plastic
straps that hold the mounting block (H).
2. Remove the metallic bracket (G) from the seat by cutting the straps.
Disengage and remove the metallic bracket (G) from the child seat, pulling
it upwards.
3. Use the Allen key No. (H9) to loosen and remove the metal mounting
plate (F1).
4. Hold the metallic bracket (G) the same as in the picture and pass it
through the opening in the child bicycle seat.
5. In order to adjust the child bicycle seat according to the bicycle size,
set the metallic bracket (G) into one of the two allowed positions to move
the seat backward or forward. At the beginning we suggest to place it on
the position No 1.
6. Insert the metallic mounting plate (F1) on the grooves of the child
bicycle seat, and close it as indicated in the picture.
7. Place the washer (F3) on the screw (F2). Then tighten securely with the
key (H9). Tighten tightly so that the metal bracket (G) is securely fastened.
This step is extremely important for the safety of the child.
8. Remove the screws (H5) on the mounting block (H), with the Allen key
no. 6 (H9).
9. Please check if you can install the mounting kit option H.A. In order to
use this set you need at least 35 mm height available on the the headtube
frame. If you don´t have this length available, please choose option H.B.
Option H.A.: To install the mounting block (H), option H.A, position the
mounting block (H1) facing the front of the bicycle frame headtube. Make
sure that the black plastic part of the mounting block (H1) is facing the
top. Using the screws (H5), secure the metallic mounting plate (H4) and
the plastic connector (H3) to the mounting block (H1).
By using the combination H.A with the screws (H5) you will be able to
place the mounting block (H) in frame headtubes ranging from ø 22 to
34 mm.
If your frame head tube is wider, please use the screw H8 (supplied in the
plastic bag ), and you will be able to place the mounting block (H) in frame
headtubes ranging from ø 28 to 40 mm.
It´s very important that the screw is long enough to allow the correct
tightening of the mounting Block (H).
Option H.B.: In case the bicycle frame does not have enough space to
apply the mounting Kit (H.A), use the additional kit (H.B) supplied in the
plastic bag. By using the combination H.B with the screws (H8) you will be
able to place the mounting block (H) in frame headtubes ranging from
ø 28 to 40 mm.
Position the mounting block (H1) facing the front of the bicycle frame
headtube. Make sure that the black plastic part of the mounting block
(H1) is facing the top.
Using the screws (H8), secure the metallic mounting plate (H7) and the
plastic connector (H6) to the mounting block.
H.A./B.A.: Next, make sure that the mounting block (H) is centered
regarding the headtube, and strong hand tighten the screws, applying the
same force in both of them. Make sure the mounting block (H) is firmly
fixed to the frame head tube. This step is extremely important for the
child’s and cyclist safety.
10. Insert the ends of the metallic bracket (G) into the holes of the
mounting block (H1) until you hear a click (1) from both sides. This sound
indicates it is in the locked position. Make sure that the ends of the
metallic bracket (G) will pass through the mounting block (H) as shown
in the picture (2). After properly installing the baby-seat please make sure
that the mounting block (H) and the seat (A) are properly centered. Make
sure that the screws are properly handed tighten and that the mounting
block (H) is securely fixed. Try to move or rotate the baby-seat in order to
check if the mounting block (H) is firmly attached. If it´s properly attached
it will not move. This step is extremely important for the children and
cyclist safety.
11. (B) To place the child in the seat, first open the belt. Start by pressing
the releases on the sides of the safety buckle (B4) and pull the buckle (B1)
upwards, so that it slides out of the socket (B5). Place the child in the seat.
Insert the safety buckle (B1) in its socket again (B5). Make sure that the
This child bicycle seat must not be mounted to bicycles fitted with rear
shock absorbers.
This child bicycle seat must not be mounted to a racing bicycle with
drop handlebar.
This child bicycle seat must not be mounted to Motorized Vehicles such
as Mopeds and Scooters.
This child bicycle seat must not be mounted in bicycles with triangular,
square or carbon fiber frames.
This child bicycle seat must be assembled on bicycles with round and
oval frame head tube with diameters ranging from Ø22 to Ø40 mm.
The child bicycle seat must be assembled on bicycles with wheels with
diameters of 26” and 28”.
This child bicycle seat is only suitable for carrying children with a
maximum weight of 15 Kg (and children with recommended ages ranging
from 9 months to 3 years of age - with the weight as the decisive variable).
The total weight of the cyclist and the child transported must not exceed
the maximum permitted load permitted for the bicycle. Information on
the maximum load can be found in the operating instructions of the
bicycle. You can also contact the manufacturer for this question.
The seat may only be mounted on a bicycle suitable for the attachment
of such additional loads.
The position of the child bicycle seat must be adjusted so that the bicycle
rider does not touch the child bicycle seat with the feet when in motion.
• It’s very important to adjust correctly the seat and its component parts
for optimum comfort and safety of the child. It’s also important that the
seat does not slope forward so that the child does not tend to slide out of
it. It’s also important that the backrest slope backward slightly.
• Check if all parts of the bicycle function correctly with the child bicycle
seat mounted.
Check the instructions of the bicycle, and If you have any doubts
on fitting the child bicycle seat to your bicycle, please contact your
bicycle supplier for further information.
ASSEMBLY INSTRUCTIONS
TECHNICAL FEATURES
A. Main seat
B/B.A. Safety belt
B1/B.A1. Safety lock
B2. Belt adjuster
B3. Central belt adjuster
B4. Safety buckle releases
B5. Safety buckle socket
C. Cushion
D. Footrest strap
E. Footrest
F. Metallic mounting Kit
F1. Metallic mounting plate
F2. M8x16 screw
F3. M8 washer
F4. M8 nut
G. Metallic bracket
H. Mounting block
H1. Plastic mounting block
H2. Release button
H3. Plastic Conector
H4. Metallic mounting plate
H5. Screw M8x35
H6. Frame plastic mounting
H7. Metallic mounting plate
H8. Screw M8x50
H9. Allen Key nr. 6
I. Batch serial number
TABLE OF CONTENTS OF PRODUCT
For child safety and for your peace of mind, Polisport has developed the
perfect child carrying solution that’s suitable for a wide range of adult bicycles.
Our ergonomic child seats are all built with safety and comfort as the primary
goals.
In this manual, you will find information on attaching the child bicycle seat to
the frame head tube of your bicycle.
Carefully read the manual for a safe and correct installation of the child
bicycle seat.
FRONT BABY SEAT FOR BICYCLE
FRONT HEAD TUBE MOUNTING SYSTEM
EN
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Polisport Bubbly Mini Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Polisport Bubbly Mini Plus in de taal/talen: Alle talen als bijlage per email.

De handleiding is 3.7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info