Camera powers off during
self-timer countdown.
Battery is exhausted. Recharge the battery.
Recorded pictures are
not saved in memory.
Camera powers off before the
save operation is complete
or
Removing the memory card
before the save operation is
complete.
Turn the camera off after the
save operation is complete
or
Do not remove the memory
card before the save operation
is complete.
Color of the playback
pictures is different from
the picture on the Monitor
screen during recording.
Sunlight or light from another
source is shining directly into
the lens during recording.
Position the camera so sunlight
does not shine directly onto
the lens.
Pictures are not
displayed.
A memory card with non-DCF
pictures recorded with another
camera is loaded in the camera.
This camera cannot display non-
DCF pictures in a memory card
used by another digital camera.
I cannot communicate
with NetMeeting
successfully.
Camera does not set to
WDM.
Set the camera to WDM.
Symptom
Problem Solution
The user cannot delete
the images on the
camera through the
computer.
The computer needs 1-
2 minute(s) for the data
processing.
The user has to wait for 1-2
minute(s) for data process-
ing before disconnecting the
camera from the computer.
Built-in Li-polymer
rechargeable battery
cannot be charged fully.
The user has not powered on
the camera.
or
The USB cable is not con-
nected properly.
or
The camera is not completely
charged.
or
User has not installed driver
so the camera cannot be
powered on.
Power on the camera and
waiting for the Status LED on
the camera goes off.
or
Make sure that the Status LED on
the camera is blinking, it means
the camera is in charging status.
or
Waiting for the Status LED
goes off.
or
The user has to instatll the
driver rst and then power on
the camera.
Please also refer to the help les & User Guides that accompany the
enclosed applications. For further information and support, please visit
our website: http://www.polaroid-digital.com.
