__________________________________________6_________________________________________
1. Alcohols are flammable liquids. Disconnect Dealer4 from mains before
cleaning. Do not use in the presence of open flame. Clean only in well
ventilated areas.
2. Alcohols can be an irritant for sensitive skin. In such cases it recommended
to use rubber gloves during cleaning process.
2.2 Cleaning Feeder Rollers
Feeder rollers are the parts which require the most frequent cleaning. When they become dirty the grip
on the card decreases and the machine cannot feed correctly. The result will be a slowing down of the
dealing process and “Card Feeding Error” (Error 55 or 56). Cleaning of the Feeder roller is usually
required every 200-500 dealt boards and will depend on the condition of the cards used. It is
recommended to get into the habit of cleaning the feeder roller daily after dealing is finished no matter
how many boards were dealt.
To clean Feeder Roller please follow following steps:
1. Put the cotton gloves on the right hand index finger and dampen it with a cleaning agent. The cotton
should not be too wet. If cotton is too wet the cleaning agent can get under the rubber which is not
recommended. Do not spray cleaning agent directly onto the roller. Be sure that cleaning agent does not
drop on the camera (can happened if cotton is too wet).
2. Put the left hand finger under the roller and rotate it slowly. The right hand finger with the cotton
glove should clean the roller by rubbing it side to side as shown on the picture below:
3. Also clean the Card Support Mushroom by wiping it with a wet cloth or glove.
4. After cleaning leave the machine to dry before starting to deal again.
