31
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting L/ R), C ),
surround speakers (SL /SR ), and the subwoofer (SW ), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speak
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound
following guidelines should help you to get the best sound from your system.
•
The subwoofer can be placed on the floor. Ideally, the other sp
ear-level when you’re listening to them. Putting the speakers on the flo
subwoofer), or mounting them very high on a wall is not recommended.
•
For
the TV.
•
If you’re
speakers at a sufficient distance from your CRT TV.
•
If you’re using a center speaker, place the front speakers at a wider an
them at a narrower angle.
•
Place the
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
•
It is best to angle the speakers towards the listening position. The an
size of the room. Use less of an angle for bigger rooms.
•
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should b
behind the listener than for home theater playback.
•
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sou
•
Make sure that all speakers are securely installed. This not only improves sou
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
5.1 channel surround system:
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting L/ R), C ),
surround speakers (SL /SR ), and the subwoofer (SW ), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speak
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound
following guidelines should help you to get the best sound from your system.
•
The subwoofer can be placed on the floor. Ideally, the other sp
ear-level when you’re listening to them. Putting the speakers on the flo
subwoofer), or mounting them very high on a wall is not recommended.
•
For
the TV.
•
If you’re
speakers at a sufficient distance from your CRT TV.
•
If you’re using a center speaker, place the front speakers at a wider an
them at a narrower angle.
•
Place the
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
•
It is best to angle the speakers towards the listening position. The an
size of the room. Use less of an angle for bigger rooms.
•
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should b
behind the listener than for home theater playback.
•
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sou
•
Make sure that all speakers are securely installed. This not only improves sou
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
5.1 channel surround system:
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting L/ R), C ),
surround speakers (SL /SR ), and the subwoofer (SW ), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speak
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound
following guidelines should help you to get the best sound from your system.
•
The subwoofer can be placed on the floor. Ideally, the other sp
ear-level when you’re listening to them. Putting the speakers on the flo
subwoofer), or mounting them very high on a wall is not recommended.
•
For
the TV.
•
If you’re
speakers at a sufficient distance from your CRT TV.
•
If you’re using a center speaker, place the front speakers at a wider an
them at a narrower angle.
•
Place the
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
•
It is best to angle the speakers towards the listening position. The an
size of the room. Use less of an angle for bigger rooms.
•
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should b
behind the listener than for home theater playback.
•
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sou
•
Make sure that all speakers are securely installed. This not only improves sou
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
5.1 channel surround system:
6
6
K
Home Menu
6
6
31
2
35
4
•
Surr – Select LARGE if your surround speakers
reproduce bass frequencies effectively. Select SMALL to
send bass frequencies to the other speakers or
subwoofer. If you didn’t connect surround speakers
choose NO (the
the other speakers).
•
Subwoofer – LFE signals and bass frequencies of
channels set to SMALL are output from the subwoofer
when YES is selected (see notes below). Choose the
PLUS setting if you want the subwoofer to output bass
sound continuously or you want deeper bass (the bass
frequencies that would normally come out the front and
center speakers are also routed to the subwoofer). If you
did not connect a subwoofer choose NO (the bass
frequencies are output from other speakers).
4
When you’re finished, press
RETURN
.
You return to the Manual SP Setup menu.
•
If SMALL for
will automatically be fixed to YES . Also, the center,
surround can’t be set to LARGE if the front speakers are
set to SMALL . In this case, all bass frequencies are sent
to the subwoofer.
•
If you
logical LARGE PLUS
for the subwoofer. This may not, however, yield the best
bass
room you may actually experience a decrease in the
amount of
case, try changing the position
you
it set to PLUS and YES or the front speakers set to
LARGE and SMALL alternatively and let your ears
which sounds
option is to route all the bass sounds to the
selecting SMALL for the front speakers.
X.Over
•
Default setting: 100Hz
This setting
back from the speakers selected as LARGE , or the
subwoofer, and bass sounds playing back from those
selected as SMALL . It also decides where the cutoff will be
for bass sounds in the LFE channel.
•
For more on selecting the speaker sizes, see Speaker
Setting on page 30 .
1
Select ‘Manual SP S
2
Select ‘X.Over’ from the Manu
3
Choose the frequency cutoff point.
Frequencies below the cutoff point will be sent to the
subwoofer (or LARGE speakers).
4
When you’re finished, press
RETURN
.
You return to the Manual SP Setup menu.
Channel Level
Using the channel level settings, you can adjust the overall
balance of your speaker system, an important factor when
setting up a home theater system.
•
The test tones used in the Channel Level settings are
output at high volume.
1
Select ‘Manual SP S
2
Select ‘Channel Level’ from the Manual SP
menu.
3
Select a setup option.
•
Manual – Move the test tone manually from speaker
to speaker and adjust individual channel levels.
•
Auto – Adjust channel levels as the test tone moves
from speaker to speaker automatically.
4
Confirm your selected setup o
The test tones will start after you press
ENTER
. After
the volume increases to the reference level, test tones
will be output.
5
Adjust the level of each channel using
/
.
If you selected Manual , use
/
to switch speakers.
The Auto
on-screen:
Adjust the level of each speaker as the test tone is
emitted.
•
If
the readings from your main listening position and adjust
the level
reading).
•
The subwoofer test tone is output at low volumes. You
may need to adjust the level after testing with an actual
soundtrack.
6
When you’re finished, press
RETURN
.
You return to the Channel Level menu.
2.Manual SP Setup
Return
a.Speaker Setting
b.X.Over
c.Channel Level
d.Speaker Distance
2b.X.Over
Return
Frequency 100Hz
2.Manual SP Setup
Return
a.Speaker Setting
b.X.Over
c.Channel Level
d.Speaker Distance
2c.Channel Level
T
Enter:Next Return
2c.Channel Level
T
Please Wait . . .20
Caution
Loud test tones
will be output.
Return
2c.Channel Level
Front L
Center
Front R
Surround R
Surround L
Subwoofer
Return
[ 0dB]
[ 0dB]
[ 0dB]
[ 0dB]
[ 0dB]
0dB
Home Menu
6
6
31
2
35
4
•
Surr – Select LARGE if your surround speakers
reproduce bass frequencies effectively. Select SMALL to
send bass frequencies to the other speakers or
subwoofer. If you didn’t connect surround speakers
choose NO (the
the other speakers).
•
Subwoofer – LFE signals and bass frequencies of
channels set to SMALL are output from the subwoofer
when YES is selected (see notes below). Choose the
PLUS setting if you want the subwoofer to output bass
sound continuously or you want deeper bass (the bass
frequencies that would normally come out the front and
center speakers are also routed to the subwoofer). If you
did not connect a subwoofer choose NO (the bass
frequencies are output from other speakers).
4
When you’re finished, press
RETURN
.
You return to the Manual SP Setup menu.
•
If SMALL for
will automatically be fixed to YES . Also, the center,
surround can’t be set to LARGE if the front speakers are
set to SMALL . In this case, all bass frequencies are sent
to the subwoofer.
•
If you
logical LARGE PLUS
for the subwoofer. This may not, however, yield the best
bass
room you may actually experience a decrease in the
amount of
case, try changing the position
you
it set to PLUS and YES or the front speakers set to
LARGE and SMALL alternatively and let your ears
which sounds
option is to route all the bass sounds to the
selecting SMALL for the front speakers.
X.Over
•
Default setting: 100Hz
This setting
back from the speakers selected as LARGE , or the
subwoofer, and bass sounds playing back from those
selected as SMALL . It also decides where the cutoff will be
for bass sounds in the LFE channel.
•
For more on selecting the speaker sizes, see Speaker
Setting on page 30 .
1
Select ‘Manual SP S
2
Select ‘X.Over’ from the Manu
3
Choose the frequency cutoff point.
Frequencies below the cutoff point will be sent to the
subwoofer (or LARGE speakers).
4
When you’re finished, press
RETURN
.
You return to the Manual SP Setup menu.
Channel Level
Using the channel level settings, you can adjust the overall
balance of your speaker system, an important factor when
setting up a home theater system.
•
The test tones used in the Channel Level settings are
output at high volume.
1
Select ‘Manual SP S
2
Select ‘Channel Level’ from the Manual SP
menu.
3
Select a setup option.
•
Manual – Move the test tone manually from speaker
to speaker and adjust individual channel levels.
•
Auto – Adjust channel levels as the test tone moves
from speaker to speaker automatically.
4
Confirm your selected setup o
The test tones will start after you press
ENTER
. After
the volume increases to the reference level, test tones
will be output.
5
Adjust the level of each channel using
/
.
If you selected Manual , use
/
to switch speakers.
The Auto
on-screen:
Adjust the level of each speaker as the test tone is
emitted.
•
If
the readings from your main listening position and adjust
the level
reading).
•
The subwoofer test tone is output at low volumes. You
may need to adjust the level after testing with an actual
soundtrack.
6
When you’re finished, press
RETURN
.
You return to the Channel Level menu.
2.Manual SP Setup
Return
a.Speaker Setting
b.X.Over
c.Channel Level
d.Speaker Distance
2b.X.Over
Return
Frequency 100Hz
2.Manual SP Setup
Return
a.Speaker Setting
b.X.Over
c.Channel Level
d.Speaker Distance
2c.Channel Level
T
Enter:Next Return
2c.Channel Level
T
Please Wait . . .20
Caution
Loud test tones
will be output.
Return
2c.Channel Level
Front L
Center
Front R
Surround R
Surround L
Subwoofer
Return
[ 0dB]
[ 0dB]
[ 0dB]
[ 0dB]
[ 0dB]
0dB
Home Menu
6
6
31
2
35
4
•
Surr – Select LARGE if your surround speakers
reproduce bass frequencies effectively. Select SMALL to
send bass frequencies to the other speakers or
subwoofer. If you didn’t connect surround speakers
choose NO (the
the other speakers).
•
Subwoofer – LFE signals and bass frequencies of
channels set to SMALL are output from the subwoofer
when YES is selected (see notes below). Choose the
PLUS setting if you want the subwoofer to output bass
sound continuously or you want deeper bass (the bass
frequencies that would normally come out the front and
center speakers are also routed to the subwoofer). If you
did not connect a subwoofer choose NO (the bass
frequencies are output from other speakers).
4
When you’re finished, press
RETURN
.
You return to the Manual SP Setup menu.
•
If SMALL for
will automatically be fixed to YES . Also, the center,
surround can’t be set to LARGE if the front speakers are
set to SMALL . In this case, all bass frequencies are sent
to the subwoofer.
•
If you
logical LARGE PLUS
for the subwoofer. This may not, however, yield the best
bass
room you may actually experience a decrease in the
amount of
case, try changing the position
you
it set to PLUS and YES or the front speakers set to
LARGE and SMALL alternatively and let your ears
which sounds
option is to route all the bass sounds to the
selecting SMALL for the front speakers.
X.Over
•
Default setting: 100Hz
This setting
back from the speakers selected as LARGE , or the
subwoofer, and bass sounds playing back from those
selected as SMALL . It also decides where the cutoff will be
for bass sounds in the LFE channel.
•
For more on selecting the speaker sizes, see Speaker
Setting on page 30 .
1
Select ‘Manual SP S
2
Select ‘X.Over’ from the Manu
3
Choose the frequency cutoff point.
Frequencies below the cutoff point will be sent to the
subwoofer (or LARGE speakers).
4
When you’re finished, press
RETURN
.
You return to the Manual SP Setup menu.
Channel Level
Using the channel level settings, you can adjust the overall
balance of your speaker system, an important factor when
setting up a home theater system.
•
The test tones used in the Channel Level settings are
output at high volume.
1
Select ‘Manual SP S
2
Select ‘Channel Level’ from the Manual SP
menu.
3
Select a setup option.
•
Manual – Move the test tone manually from speaker
to speaker and adjust individual channel levels.
•
Auto – Adjust channel levels as the test tone moves
from speaker to speaker automatically.
4
Confirm your selected setup o
The test tones will start after you press
ENTER
. After
the volume increases to the reference level, test tones
will be output.
5
Adjust the level of each channel using
/
.
If you selected Manual , use
/
to switch speakers.
The Auto
on-screen:
Adjust the level of each speaker as the test tone is
emitted.
•
If
the readings from your main listening position and adjust
the level
reading).
•
The subwoofer test tone is output at low volumes. You
may need to adjust the level after testing with an actual
soundtrack.
6
When you’re finished, press
RETURN
.
You return to the Channel Level menu.
2.Manual SP Setup
Return
a.Speaker Setting
b.X.Over
c.Channel Level
d.Speaker Distance
2b.X.Over
Return
Frequency 100Hz
2.Manual SP Setup
Return
a.Speaker Setting
b.X.Over
c.Channel Level
d.Speaker Distance
2c.Channel Level
T
Enter:Next Return
2c.Channel Level
T
Please Wait . . .20
Caution
Loud test tones
will be output.
Return
2c.Channel Level
Front L
Center
Front R
Surround R
Surround L
Subwoofer
Return
[ 0dB]
[ 0dB]
[ 0dB]
[ 0dB]
[ 0dB]
0dB
Home Menu
6
6
31
2
35
4
•
Surr – Select LARGE if your surround speakers
reproduce bass frequencies effectively. Select SMALL to
send bass frequencies to the other speakers or
subwoofer. If you didn’t connect surround speakers
choose NO (the
the other speakers).
•
Subwoofer – LFE signals and bass frequencies of
channels set to SMALL are output from the subwoofer
when YES is selected (see notes below). Choose the
PLUS setting if you want the subwoofer to output bass
sound continuously or you want deeper bass (the bass
frequencies that would normally come out the front and
center speakers are also routed to the subwoofer). If you
did not connect a subwoofer choose NO (the bass
frequencies are output from other speakers).
4
When you’re finished, press
RETURN
.
You return to the Manual SP Setup menu.
•
If SMALL for
will automatically be fixed to YES . Also, the center,
surround can’t be set to LARGE if the front speakers are
set to SMALL . In this case, all bass frequencies are sent
to the subwoofer.
•
If you
logical LARGE PLUS
for the subwoofer. This may not, however, yield the best
bass
room you may actually experience a decrease in the
amount of
case, try changing the position
you
it set to PLUS and YES or the front speakers set to
LARGE and SMALL alternatively and let your ears
which sounds
option is to route all the bass sounds to the
selecting SMALL for the front speakers.
X.Over
•
Default setting: 100Hz
This setting
back from the speakers selected as LARGE , or the
subwoofer, and bass sounds playing back from those
selected as SMALL . It also decides where the cutoff will be
for bass sounds in the LFE channel.
•
For more on selecting the speaker sizes, see Speaker
Setting on page 30 .
1
Select ‘Manual SP S
2
Select ‘X.Over’ from the Manu
3
Choose the frequency cutoff point.
Frequencies below the cutoff point will be sent to the
subwoofer (or LARGE speakers).
4
When you’re finished, press
RETURN
.
You return to the Manual SP Setup menu.
Channel Level
Using the channel level settings, you can adjust the overall
balance of your speaker system, an important factor when
setting up a home theater system.
•
The test tones used in the Channel Level settings are
output at high volume.
1
Select ‘Manual SP S
2
Select ‘Channel Level’ from the Manual SP
menu.
3
Select a setup option.
•
Manual – Move the test tone manually from speaker
to speaker and adjust individual channel levels.
•
Auto – Adjust channel levels as the test tone moves
from speaker to speaker automatically.
4
Confirm your selected setup o
The test tones will start after you press
ENTER
. After
the volume increases to the reference level, test tones
will be output.
5
Adjust the level of each channel using
/
.
If you selected Manual , use
/
to switch speakers.
The Auto
on-screen:
Adjust the level of each speaker as the test tone is
emitted.
•
If
the readings from your main listening position and adjust
the level
reading).
•
The subwoofer test tone is output at low volumes. You
may need to adjust the level after testing with an actual
soundtrack.
6
When you’re finished, press
RETURN
.
You return to the Channel Level menu.
2.Manual SP Setup
Return
a.Speaker Setting
b.X.Over
c.Channel Level
d.Speaker Distance
2b.X.Over
Return
Frequency 100Hz
2.Manual SP Setup
Return
a.Speaker Setting
b.X.Over
c.Channel Level
d.Speaker Distance
2c.Channel Level
T
Enter:Next Return
2c.Channel Level
T
Please Wait . . .20
Caution
Loud test tones
will be output.
Return
2c.Channel Level
Front L
Center
Front R
Surround R
Surround L
Subwoofer
Return
[ 0dB]
[ 0dB]
[ 0dB]
[ 0dB]
[ 0dB]
0dB
• Surr – VLARGE , jos surroundkaiuttimissa on
hyvä bassotoisto. VSMALL , jolloin bassotaajuudet
lähetetään muille kaiuttimille tai alataajuuskaiuttimelle.
Jos surroundkaiuttimia ei ole, valitse NO , jolloin
surroundkanava lähetetään muille kaiuttimille.
• Subwoofer – Alataajuuskaiutin toistaa LFE-signaalit
ja bassotaajuudet, jos sen tila on YES ja kanavien
bassoasetukset ovat SMALL (katso huomio jäljempää).
VPLUS , jos haluat alataajuuskaiuttimen toistavan
bassoa jatkuvasti tai haluat tuhdimman basson (etu- ja
keskikaiuttimien normaalisti toistamat bassot ohjataan
alataajuuskaiuttimelle). Jos alataajuuskaiutinta ei
ole, valitse NO ja bassotaajuudet toistetaan muista
kaiuttimista.
4 Kun olet valmis, paina
RETURN
Palaat Manual SP Setup -valikkoon.
Huomio
• Jos etukaiuttimille valitaan SMALL , alataajuuskaiutin
on kiinteästi YES . Keski- ja surroundkaiuttimille ei voi
valita LARGE , jos etukaiuttimilla on SMALL . Silloin
bassotaajuudet lähetetään alataajuuskaiuttimelle.
• Jos sinulla on alataajuuskaiutin ja haluat reilusti bassoa,
loogiselta valinnalta tuntuisi LARGE etukaiuttimille
ja PLUS alataajuuskaiuttimelle. Tämä ei kuitenkaan
anna parasta bassotoistoa. Matalien taajuuksien
kumoutuminen huoneessa voi kaiuttimien asettelusta
riippuen johtaa huonompaan bassotoistoon. Tällöin
kokeile muuttaa kaiuttimien sijaintia tai kulmaa. Jos
hyviä tuloksia ei tule, kokeile alataajuuskaiuttimelle
PLUS tai YES ja etukaiuttimille LARGE tai SMALL
yhdistelminä ja hae paras tulos kuuntelemalla.
Ongelmatilanteessa helpoin ratkaisu on kaiken
bassotoiston reitittäminen alataajuuskaiuttimeen
valitsemalla etukaiuttimille SMALL .
X.Over
• Oletus: 100 Hz
Tämä asetus määrittelee rajataajuuden kaiutinasetuksessa
LARGE kaiuttimien ja alataajuuskaiuttimen toiston välillä
sekä bassotoiston kaiuttimista, jos asetus on SMALL .
Se määrää myös LFE-kanavan bassoäänien rajan.
• Katso lisää kaiuttimien koon määrittelystä, sivu 30 .
1 V
2 V
3 V
Rajataajuutta pienemmät raajuudet lähetetään
alataajuuskaiuttimelle (tai LARGE kaiuttimille).
4 Kun olet valmis, paina
RETURN
.
Palaat Manual SP Setup -valikkoon.
Kanavataso
Kanavatasoasetuksilla voit säätää kaiutinjärjestelmäsi
kokonaistasapainon. Tämä on tärkeä kotiteatterin
asentamisen vaihe.
V
• Kanavatason asetuksen testiäänet ovat erittäin
voimakkaita.
1 V
2 V
Level’.
3 V
• Manual – V
manuaalisesti ja säädä kanavatasot yksitellen.
• Auto – Säädä kanavatasot testiäänen siirtyessä
kaiuttimesta toiseen automaattisesti.
4 V
T
ENTER
. T
toistetaan, kun volyymi nousee referenssitasolle.
5 Säädä joka kanavan taso näppäimillä
Jos olet valinnut Manual , vaihda kaiuttimia
näppäimillä .
Auto toistaa testiäänet kaiuttimista ruudussa
näkyvässä järjestyksessä:
Säädä kunkin kaiuttimen tasoa testiäänen kuuluessa.
Huomio
• Jos käytät äänenpaineen (SPL) mittaria, mittaa lukemat
kuuntelukohdasta säädä kunkin kaiuttimen tasoksi
75 dB SPL (C-weighting/slow reading).
• Alataajuuskaiuttimen testiääni toistetaan hiljaiselle
volyymilla. T
koekuuntelussa ääniraidan kanssa.
6 Kun olet valmis, paina
RETURN
Palaat Channel Level -valikkoon.
