574062
93
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
Additional information
11
93
En
No sound output from the front
speakers.
• The U-shaped connectors that connect the
POWER AMP IN terminals to the front
channel pre outs are not connected.
• Reconnect the POWER AMP IN terminals to the front
channel pre-outs using the supplied U-shaped connectors
(see item 8 in Rear panel on page 12).
• The front speakers are connected to the B
speaker system jack.
• Connect the front speakers to the A speaker system
jacks (see Installing your speaker system on page 24).
No sound from the surround or
center speakers.
• Speaker settings are incorrect. (for
example, they have been set to NO).
• Check you speaker settings in Speaker Systems on
page 52.
• The surround and/or center levels are
turned down.
• Check the levels in Channel Level on page 54.
• The surround and/or center speakers are
disconnected.
• Check Installing your speaker system on page 24 to
make sure the speakers are connected correctly.
• The STEREO listening mode has been
selected.
• Choose a surround listening mode (see Listening in
surround sound on page 39).
• Speaker system B is selected. • Select speaker system A (see Switching the speaker
system on page 75).
• The 2 channel input setting is selected
when using the multichannel analog inputs
or the USB interface.
• Change the setting accordingly (see Selecting USB and
multichannel analog input channels on page 45).
No sound from surround back
speakers.
• Surround back speakers are set to NO.• Set the surround back speakers to LARGE or SMALL
(see Speaker Systems on page 52).
• The SB CH mode is switched off. • Set the surround back channel to SB CH ON (see
page 46).
• The source is not a 6.1 channel playback
source.
• Choose an Advanced surround listening mode (see
Listening in surround sound on page 39).
• The surround back speakers are
disconnected.
• Check Installing your speaker system on page 24 to
make sure the speakers are connected correctly.
• The surround back channel is on the 1
speaker setting, and your speaker is
connected to the right channel output.
• Connect the speaker to the surround back left channel
output (Installing your speaker system on page 24).
• The wrong input setting is selected when
using the multichannel analog inputs or the
USB interface.
• Change the setting accordingly (see Selecting USB and
multichannel analog input channels on page 45).
• The SB CH MODE is switched to AUTO and
the Dolby Surround EX / DTS ES software
you’re playing has no flag to indicate it is 6.1
compatible.
• You can still listen with surround back sound by setting
the surround back channel to SB CH ON (page 46).
No sound from subwoofer. • The subwoofer is disconnected or switched
off.
• Connect or switch on the subwoofer (see Installing your
speaker system on page 24).
• The subwoofer's settings are incorrect. • Set the subwoofer (see Speaker Systems on page 52).
• Set the front speakers to SMALL (see Speaker Systems
on page 52).
• The crossover frequency is set too low. • Set the crossover frequency to a (higher) frequency that
matches your speaker characteristics (see Speaker
Systems on page 52)
• The bass attenuator is set too low. • See Bass Peak Level on page 86 to adjust the setting.
• The subwoofer's levels are too low. • See Channel Level on page 54 to check the speaker
levels.
• Check the volume control on the subwoofer to make
sure it is turned up.
No sound from one speaker. • The speaker setting has been set to NO.• Change the setting in Speaker Systems on page 52.
• The speaker level is too low. • Check the level in Channel Level on page 54.
• The speaker isn’t connected properly. Check Installing your speaker system on page 24 to
make sure the speaker is connected correctly.
• The source has no sound output for that
channel.
• By choosing an Advanced surround listening mode (see
Listening in surround sound on page 39), you may be able
to create an extra channel for the speaker.
The program indicator lights for
a channel, but no sound is
output from the corresponding
speaker.
• A mute signal is recorded on the channel.
Symptom Cause Remedy
93

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Pioneer-VSA-AX10i-S

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer VSA-AX10i-S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer VSA-AX10i-S in de taal/talen: Engels als bijlage per email.

De handleiding is 3,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Pioneer VSA-AX10i-S

Pioneer VSA-AX10i-S Gebruiksaanwijzing - Nederlands - 104 pagina's

Pioneer VSA-AX10i-S Gebruiksaanwijzing - Deutsch - 104 pagina's

Pioneer VSA-AX10i-S Gebruiksaanwijzing - English - 25 pagina's

Pioneer VSA-AX10i-S Gebruiksaanwijzing - Français - 104 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info