573928
149
Verklein
Vergroot
Pagina terug
1/156
Pagina verder
Additional information
17
149
En
• This channel’s TV system is different from the
recorder’s setting.
The TV system (PAL, NTSC, etc.) of the current channel is
different from the TV system settings of this recorder.
• Recording failed due to a TV system mismatch. Press
DISPLAY to clear message.
The timer recording failed because the TV system of the
channel set for recording was different from the setting of
the recorder.
• Playback has stopped because the TV system is
different than the recording.
During recording or timer recording standby, the TV System
(PAL, NTSC, etc.) of the playback video changed, causing
playback to stop automatically.
• You are not allowed to watch this Conditional Access
Program.
A CA module or smart card (obtained from your service
provider) is required to watch the selected program. Insert
the supplied module or card into the Common Interface card
slot on the rear of the recorder (page 47).
There is no DV input or the input signal is unrecordable.
No signal was detected at the DV IN jack. This may appear if
a blank section of DV tape is playing in the connected
camcorder.
• No DV camcorder connected. The camcorder is not connected properly, or the camcorder
is switched off.
• You cannot connect more than one DV camcorder at
a time.
This recorder’s DV jack supports connection to just one
camcorder.
• Cannot operate the DV camcorder.
This recorder cannot operate the DV camcorder. Try switching
off the camcorder then turn it back on again.
• Could not operate the DV camcorder. This recorder was not able to operate the DV camcorder.
• The DV camcorder is not set for playback. Please
select playback mode on the DV camcorder.
The camcorder is in camera mode. Switch it to playback
mode.
• Searching for a printer. Please wait a moment. To
cancel, press ENTER.
This message is displayed when the recorder is scanning for
a connected printer, or when the printer is not yet ready for
printing. If there is no printer connected, please connect one.
If the message does not disappear, try disconnecting then
reconnecting the USB cable.
(Note that this recorder may not work correctly with all printers.)
• The printer is not ready or is not
connected. Please check the printer.
This message is displayed when communication could not
be established with the printer. See the Troubleshooting
section if you do not know the cause.
• Printing has been canceled because ... This message is displayed when there is a printer error
during printing. After checking the printer for the cause of
the error, either reconnect the printer and start the printing
job again, or select "Yes" to resume printing (select "No" to
cancel the print job). See also the operating instructions that
came with your printer for possible causes of print errors.
Message Explanation/Action
149

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer RCS-656HX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer RCS-656HX in de taal/talen: Engels als bijlage per email.

De handleiding is 9,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Pioneer RCS-656HX

Pioneer RCS-656HX Gebruiksaanwijzing - English - 156 pagina's

Pioneer RCS-656HX Gebruiksaanwijzing - Français - 155 pagina's

Pioneer RCS-656HX Gebruiksaanwijzing - Dansk, Svenska, Suomi - 464 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info