573928
148
Verklein
Vergroot
Pagina terug
1/156
Pagina verder
Additional information
17
148
En
On-screen displays and recorder displays
The table below shows a list of error messages that you may encounter when using the recorder and an explanation
of their meaning.
Message Explanation/Action
• Initializing disc. Please wait a moment. When you load a blank DVD-RW or DVD+RW disc, the
recorder automatically initializes it.
• Incompatible region number. The disc loaded has an incompatible region number for the
recorder and so will not play.
• Cannot record any more titles.
• No more space for file management data.
The disc control data limit has been reached, or the maximum
number of chapters and/or titles has been reached. Erase
titles/chapters or combine chapters.
This disc cannot be recorded. Undo the finalization.
The disc was finalized on a non-Pioneer DVD recorder. Undo
the finalization in order to recording/editing.
• Cannot play this disc.
• This disc cannot be recorded.
• Cannot read the CPRM information.
• Could not record the information to the disc.
• Cannot edit.
• Could not initialize disc.
• Could not complete finalization successfully.
• Could not undo finalization successfully.
• Could not successfully unlock the disc.
The disc may be dirty or damaged. Take out the disc, clean it
and retry. If the error persists, use a new disc. If the error
appears even with a new disc, please consult a Pioneer
Service Center.
• Incompatible or unreadable disc. The disc loaded is a playback-only disc type. This display
may also appear if the disc is dirty or damaged.
Cannot record to a disc that is not CPRM compatible.
Cannot record this content using Video mode recording.
• This video cannot be recorded to DVD+R/+RW.
The video source is copy-once protected. Use a VR mode
DVD-R/-RW disc with CPRM for recording.
• This content is copy protected. The video source is copy-protected and cannot be recorded.
• Incorrect CPRM information. The recorder could not read the CPRM information. The
recorder may be damaged—please consult a Pioneer
Service Center.
• Repairing disc.
• Repairing the HDD.
During recording, the power was cut. This display appears
when the power is restored.
• Could not repair the disc. The recorder was unable to repair the disc after a power cut.
The contents of the recording will be lost.
• Overheating has stopped operation.
Press DISPLAY to clear message.
The internal temperature of the recorder has exceeded the
operating limit. If this message reappears, please contact a
Pioneer authorized service center.
• HDD optimization is recommended. This can be done
using Disc Setup.
The HDD should be optimized (basically, HDD housekeeping)
to maintain playback and recording performance.
• Please perform HDD optimization. This can be done
using Disc Setup.
The HDD is in more urgent need of optimization in order to
maintain performance.
• The HDD has not been sufficiently optimized. Please
optimize again.
If this message appears repeatedly after optimizing the HDD
it is likely that there is not enough free space on the HDD for
optimization to complete properly. Please erase some titles
from the HDD and optimize again.
148

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer RCS-656HX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer RCS-656HX in de taal/talen: Engels als bijlage per email.

De handleiding is 9,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Pioneer RCS-656HX

Pioneer RCS-656HX Gebruiksaanwijzing - English - 156 pagina's

Pioneer RCS-656HX Gebruiksaanwijzing - Français - 155 pagina's

Pioneer RCS-656HX Gebruiksaanwijzing - Dansk, Svenska, Suomi - 464 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info