Handleiding Pioneer CDJ-900NXS (pagina 25 van 40) (Engels)

574225

Verklein

Vergroot

Pagina terug

1/40

Pagina verder

Advanced Operation

3 Press the [CUE/LOOP CALL c(LOOP 1/2X)] or

[CUE/LOOP CALL d(LOOP 2X)] button to call out the

point to be deleted.

The track cues to the called out point and pauses.

! When multiple points are stored, a different point is called out each

time the button is pressed.

4 Press the [DELETE] button.

[ DELETE] is displayed on the main unit display, then the selected

point information is deleted.

! When a stored loop set as an active loop is deleted, the active loop is

also deleted.

Deleting points in units of discs

1 Load a disc in this unit.

When tracks from a medium other than a disc are loaded, load any track

from the disc.

2 Connect the USB device to this unit.

The cue or loop in point is displayed on the playing address display with

a mark.

3 Press the [DELETE] button for over 5 second.

[DISC CUE/LOOP DATA-DELETE? PUSH MEMORY] appears on the

main unit display.

4 Press the [MEMORY] button.

All cue and loop points for the disc currently loaded in this unit are

deleted.

! The delete mode is canceled if any button other than [MEMORY] is

pressed.

Deleting all disc information recorded on

the USB device

Connect the USB device on which the disc information is stored to this

unit.

1 With no disc loaded on this unit, press the [DELETE]

button for over 5 seconds.

[DISC CUE/LOOP DATA-DELETE ALL? PUSH MEMORY] appears on the

main unit display.

2 Press the [MEMORY] button.

All the disc information stored on the USB device is deleted.

! The delete mode is canceled if any button other than [MEMORY] is

pressed.

Setting the cue point for auto

cueing

The cue point to be set as the auto cue can be selected using one of the

methods below.

Setting the cue point by the acoustic pressure level

identified as a silent section (8 levels)

–36 dB, –42 dB, –48 dB, –54 dB, –60 dB, –66 dB, –72 dB and –78 dB

Automatically setting stored cues as cue points

MEMORY: The stored cue point nearest the beginning of the track is set

as the cue point for auto cueing.

! When [MEMORY] is set, [A. CUE] lights in white on the main unit

display.

The setting of the cue point for auto cueing can be changed using one of

the methods below.

Using the [MENU (UTILITY)]button

1 Press the [MENU (UTILITY) ] button for over 1 second.

The [UTILITY] screen is displayed.

2 Turn the rotary selector then press it.

Select [AUTO CUE LEVEL].

3 Turn the rotary selector then press it.

Select the acoustic pressure level or [MEMORY].

Using the [TIME MODE (AUTO CUE)]button

1 Press the [TIME MODE/AUTO CUE] button for over 5

second.

The currently set value is displayed on the main unit display.

2 Press the [CUE/LOOP CALL c(LOOP 1/2X)] or

[CUE/LOOP CALL d(LOOP 2X)] button.

Select the acoustic pressure level or [MEMORY].

Using the beat divide function

One beat’s worth of sound is divided by the selected beat length and

played.

! Turn the slip function off when using the beat divide function.

During playback, press the [BEAT DIVIDE] button.

Beat division starts.

! If the track’s BPM cannot be detected, the BPM is set to 130.

! When the quantize function is on, the sound is matched to the beat,

so there may be a slight delay in the function’s operation.

Canceling the beat divide function

Press the selected [BEAT DIVIDE] button.

The beat divide function is canceled.

! The beat divide function is also canceled when tracks are loaded.

Using the slip mode

When the slip mode is turned on, normal playback in the original rhythm

continues in the background while pausing (in the vinyl mode), scratch-

ing, playing loops or playing in reverse. When the slip mode is canceled,

normal playback resumes from the point reached at the time the slip

mode was canceled.

! When the quantize function is on, there may be a slight delay in

operation of this function in order to synchronize the beat.

(Slip beat looping and slip reversing only)

Display of the position playing in the background

! When in the slip mode, the currently playing position is indicated

by a yellow line on the main unit display’s waveform display (over-

all waveform or enlarged waveform). The position playing in the

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Pioneer CDJ-900NXS Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Pioneer CDJ-900NXS

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info