Handleiding Pioneer CDJ-900NXS (pagina 24 van 40) (Engels)

574225

Verklein

Vergroot

Pagina terug

1/40

Pagina verder

Returning to Loop playback (Reloop)

After canceling loop playback, press the [RELOOP/EXIT]

button during playback.

Playback returns to the previously set Loop In Point, and Loop playback

resumes.

Setting loops automatically (4-beat Loop)

During playback, press the [4-BEAT LOOP/LOOP CUTTER]

button.

A loop of 4 beats starting from the point at which the button was pressed

is set automatically according to the BPM of the currently playing track,

and loop playback starts.

If the track’s BPM cannot be detected, the BPM is set to 130.

 Another way to perform this operation

During playback, press the [IN/CUE (IN ADJUST)] button

for over 1 second.

A loop of 4 beats starting from the point at which the button was pressed

is set automatically according to the BPM of the currently playing track,

and loop playback starts.

If the track’s BPM cannot be detected, the BPM is set to 130.

 8-beat loop

During playback, press [4-BEAT LOOP/LOOP CUTTER] for

over 1 second.

A loop extending 8 beats from the point at which the button was pressed

is set automatically and loop playback begins.

Cutting loops (Loop Cut)

During loop playback, press the [CUE/LOOPCALLc

(LOOP 1/2X)] button.

The loop playing time is cut in half each time the button is pressed.

 Another way to perform this operation

During loop playback, press the [4-BEAT LOOP/

LOOP CUTTER] button.

The loop playing time is cut in half each time the button is pressed.

Extending loops (loop doubling)

During loop playback, press the

[CUE/LOOPCALLd(LOOP 2X)] button.

The loop’s length is doubled each time the button is pressed.

 Another way to perform this operation

During loop playback, press the [4-BEAT LOOP/

LOOP CUTTER] button while pressing the [OUT

(OUT ADJUST)] button.

The loop playing time is doubled each time the button is pressed.

Using active loops

1 Connect the USB device to this unit.

2 Load a track for which an active loop has been set

with rekordbox.

One loop stored in rekordbox can be set as the active loop.

The set active loop point is indicated with a red line on the waveform

display, as shown below.

When the set point is reached, the loop is set automatically and loop

playback begins.

Emergency loops

With this unit, a 4-beat loop is set automatically to prevent the sound

from being interrupted if a track can no longer continue to play.

! DJ playback is restricted during emergency looping. To cancel emer-

gency looping, load the next track.

Storing cue or loop points

1 Connect the USB device to this unit.

2 Set Cue Point or Loop Point.

3 Press the [MEMORY] button.

[ MEMORY] is displayed on the main unit display for several sec-

onds, then the point information is stored on the USB device.

Stored cue and loop points are indicated [b] at the top of the waveform

display.

! It is also possible to select media connected to other DJ players con-

nected by PRO DJ LINK.

! To store loop points, press the [MEMORY] button during loop

playback. The stored loop points are shown on the playing address

display.

Calling out stored cue or loop points

1 Connect the USB device to this unit.

2 Load the track whose cue or loop points you want to

call out.

Stored cue and loop points are indicated [b] at the top of the waveform

display.

3 Press the [CUE/LOOP CALL c(LOOP 1/2X)] or

[CUE/LOOP CALL d(LOOP 2X)] button.

Press [CUE/LOOP CALLc(LOOP 1/2X)] to call out a point before the

currently playing position, [CUE/LOOP CALLd(LOOP 2X)] to call out a

point after the currently playing position.

The track cues to the called out point and pauses.

When multiple points are stored, a different point is called out

each time the button is pressed.

! Loops set as active loops can also be called out as stored loops.

4 Press the [PLAY/PAUSE f] button.

Normal or loop playback starts from the point that was called out.

Deleting stored cue or loop points

Deleting points individually

1 Connect the USB device to this unit.

2 Load the track containing the cue point or loop points

you want to delete.

Stored cue and loop points are indicated [b] at the top of the waveform

display.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Pioneer CDJ-900NXS Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Pioneer CDJ-900NXS

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info