34
5. Troubleshooting
5.1 Testing the audio transmission
The TVLink S basestation is able to generate a test
sound to check the system.
To start testing:
Switch ON and wear ComPilot correctly
Switch OFF the TVLink S basestation first, then press
the basestation volume (c) and power (a) button
simultaneously until the status light (g) starts to blink
in different colors
ComPilot and the basestation should connect now
(blue/green or blue/orange blinks) and you hear a
sound test melody through your hearing aids.
The test sound continues for 2 minutes or until any of
the basestation buttons is pressed.
Use the ComPilot Volume (
) buttons to change
the volume of the test sound.
If no test sound can be heard, redo the pairing procedure
as described on page 20.
