28 Timer Recording
Follow the steps below to program the TV/VCR/DVD to
record TV programs while you’re away from home.
The TV/VCR/DVD will record and turn itself off automatically.
You can set a maximum of eight timer recordings.
Before you begin, make sure ...
● The clock is set. If the clock is not set, the MANUAL
CLOCK SET menu will appear. See pages 20-21 to set the
clock.
● Channels are set. Details are on page 18.
● A tape is in the TV/VCR/DVD. Make sure the record tab is
intact. Details are on page seven.
1
Press SETUP. Press ▲ or ▼ to select TIMER
PROGRAMMING, then press ENTER.
2
Press ▲ or ▼ to select a program position.
Then, press B.
3
While CH is selected, press ▲ or ▼ to select
the channel you want to record.Then press B.
If the TV/VCR/DVD is connected to a Cable
Box/Satellite Receiver, the TV/VCR/DVD must be on
channel 3, 4, or AUX.
Set CH as 03, 04, or AUX in the Timer Programming
menu. Choose the channel you want to record at the
Cable Box/Satellite Receiver. Leave the Cable
Box/Satellite Receiver on for the timer recording.
Leave the TV/VCR/DVD set to AUX. (Press SELECT
on the remote to choose AUX at the TV/VCR/DVD.)
Additional details are on page eight.
• You cannot access the TIMER
PROGRAMMING menu at step 1
if the clock is not set.The SET-
TING CLOCK menu will appear.
Follow the steps on pages 20-23
to set the clock.
• Enter the information while the
space is flashing.
Helpful Hint
