26 Videotape Recording
• You cannot record DVD contents
onto a videotape using this unit.
• Recording options are on pages
27-32.
• If you pause a recording for five
minutes, the unit will start
Recording again automatically.
• You can change the tape speed by
pressing the SPEED button while a
recording is in progress. Some dis-
tortion may appear on the tape.
Helpful Hints
1
Place a tape with its record tab intact in the
cassette compartment of the TV/VCR/DVD. The
TV/VCR/DVD power will come on.
If the power is already on and a videotape is in the
unit, make sure the unit is in TV/VCR mode.
Press SELECT so the red VCR/TV light appears on the
front of the unit.
2
Press SPEED until the desired tape speed (SP
or SLP) appears in the bottom left corner of
the screen. See tape speed details below.
3
Press CH. ▲/▼ or the Number buttons to
select the channel you want to record.
You cannot change channels during recording.You can
only record and view one TV channel at a time.
4
Press RECORD once to start recording.
The REC/OTR light will flash on the front of the
TV/VCR/DVD. (If the tape does not have a record tab,
the tape will eject. Insert another tape.)
5
To pause the recording, press k.To resume
recording, press k again or press RECORD.
6
To stop recording, press STOP C .
Cassette type / Playback Time
Tape Speed T160 T120 T60
SP
(Standard Play) 2 hrs.
2 hrs. 1 hr.
40 mins.
LP
(Long Play) 5 hrs.
4 hrs. 2 hrs.
(playback only)
20 mins.
SLP(Super Long Play)
8 hrs. 6 hrs. 3 hrs.
Ta pe Speeds
This chart shows the recording/playback time for three types
of video cassettes (T160,T120, and T60).There are three
playback speeds: SP, LP, and SLP.A tape will play only in the
speed in which it was recorded.When recording, you can
change the tape speed using the SPEED button.You cannot
record in LP speed on this TV/VCR/DVD.
The slower the speed, the more programming you can fit on
the tape. SLP is the slowest speed.
