INSTALLATION
31
30 MAINTENANCE
Installation
General
When the appliance does not have a connecting
cable and plug, then it may be connected to the
mains only by an approved installer.
After installation the wall socket and plug must
be accessible at all times.
Please note:
The power rating and required mains voltage are
shown on the rating plate at the back of the
oven. Connection should take place according to
national and local regulations.
Electrical connection
230 V -50 Hz.
■ The appliance should always be earthed.
Use good quality cable for connecting e.g.
H05RRF, 1,5 or 2,5 mm
2
, with 3 or 5 cores,
depending on the regulations.
With following colour code:
brown = phase L
blue = phase N
green/yellow = earth ( )
black= neutral or phase
Depending upon the wiring diagram, you
can use the black cores for neutral or a
phase.
The cable must have a plug suitable for a
nominal load of at least 15 A.
If you want to make a fixed connection,
ensure that a multi-pole switch with a
distance between contacts of 3 mm is
installed in the supply cable.
Wiring diagrams
■ There is a label showing the wiring
diagrams on the underside of the appliance.
Supply terminals
■ The supply terminals are accessible by
removing the cover plate on the underside.
You can make the cross connections
needed using the jumpers on the terminal
block. Do not forget to secure the cable with
the cable clamp. Refit the cover plate after
you have secured the cable.
Cleaning
Enamelled parts
The inside of the oven door, the side panels, the
base of the oven, the baking sheet and the
roasting tin are all completely enamelled. These
are best cleaned with hot, soapy water or a little
liquid detergent; rinse well with clean water.
Accessories
Self-cleaning walls can be ordered as an
accessory to this oven. These oven walls clean
themselves at a temperature of 200 °C and only
need to be wiped off with a dry cloth (accessory
package ZR 980).
Chrome
Clean the ridges, the rack and the control panel
with hot soapy water or a little liquid detergent,
rinse with clean water.
Plastic/glass
Clean the handle and knobs with soapy water or
Glassex.
Sealing rubber
Clean with hot soapy water and rinse with clean
water.
A tip
Cleaning the oven regularly will prevent stubborn
stains.
If you want to thoroughly clean the oven, the
ledges can be removed.
