USE
94
PPrrooggrraammmmiinngg bbyy ppoowweerr DDiissppllaayy
Turn the selector knob to select the microwave func-
tion. The maximum power level, 1000W, flashes in the
display.
Turn the “- / +” selector if you wish to set a lower
microwave power level, ex. 500W. Confirm the power
level by pressing the °C/W button, the time digits flash
in the display.
Turn the “- / +” selector to set the required pro-
gramme time, ex. 10 minutes.
Confirm by pressing START. The light switches on and
the programme starts.
CCoommmmeennttss
::
If the door is opened during cooking, the appliance stops and the remaining time flashes in the dis-
play. To finish the programme, simply close the door and press
START
.
The time can be adjusted at any time simply by turning the “
-- // ++
” selector.
If you wish to verify your microwave power level, you may press
°C/W
to check the dis
play
.
mmiiccrroowwaavvee ffuunnccttiioonn
eexxpprreessss pprrooggrraammmmee
EExxpprreessss PPrrooggrraammmmiinngg DDiissppllaayy
With the selector at the OFF position, press the
START
key for one second to set an express programme of
30 sec
onds. The microwave functions at maximum
power level (1000W). The light switches on and the
programme starts.
You may set an express programme up to 2 min 30 s.
Each time you press START an additional 30 seconds of
programme time is added. Press 5 times for a maxi-
mum of 2 min 30s.
Once the programme has begun, you may modify the
programme time by turning the - / + selector knob,
up to 2 min 30s.
hheeaatt && hhoolldd ffuunnccttiioonn
HHeeaatt aanndd hhoolldd DDiissppllaayy
If you leave your dish in the oven without opening the
door at the end of a microwave programme, a heat and
hold function starts up after 2
minutes to maintain the
temperature of your dish. A
triple beep after 15 min
announces the end of the heat and hold programme.
