- 25 -
the reach of your child’s hands.
• Using accessories which do not bear the
manufacturer’s approval may be dangerous.
• This product is not suitable for jogging or skating.
ITEM FEATURES
• The item is given a serial number.
• Skate comprises:
The Skate chassis, the Skate bassinet unit, the Skate
seat, a hood, a cover and a front bar to be used with
both the Skate bassinet unit and the seat.
Skate BASSINET UNIT
• It must be attached to the Skate chassis facing the
person pushing and in a horizontal position.
• It can be set at 3 different heights.
• It cannot be used in motor vehicles, but it is possible to
use it on the Peg Perego Skate stand.
Skate SEAT
• It can be attached to the Skate chassis facing the
person pushing or facing forwards.
• It can be set at 3 different heights and reclining
positions.
• It cannot be used without the Skate chassis.
ITEM COMPONENTS
• Check the contents of the packaging. For any
complaints, please contact the Customer.
• Skate chassis with basket
• Skate bassinet unit
• Skate seat
• 4 wheels with shock absorbers and ball bearings (2 swivel
or locking front wheels – 2 non-swivel rear wheels)
• More capacious basket
• Drink holder
• Front bar
• Hood
• Cover
• Rain canopy
• Set of standard adaptors for a Peg Perego Group 0+ car
seat.
INSTRUCTIONS FOR USE
SKATE CHASSIS
1• FITTING THE WHEELS: Remove the protective caps from
the rear wheels. To fit the rear wheels, push the pins
into their housing until you hear them click into place
(Fig.a).
Before fitting the front wheels, make sure that the
indicators on the attachment knobs are red. Insert the
wheel pins into their housing, making sure the green
lines on the wheels match up with the green lines on
the housing. Lastly, turn the attachment knobs until
the indicators are green (Fig.b).
IMPORTANT: Pull on the wheels to make sure they
are correctly attached.
2• OPENING: If it is completely lowered, raise the handle
to prevent it impeding the movement of the central
closure pedal: open the two levers outwards and move
the handle. Move the two levers back into position
(Fig.a).
To open the Skate chassis, release the closure lever
from the right pin of the chassis while slightly lifting
the chassis (Fig.b).
3• Hold the Skate chassis still with a foot on the rear
ledge and lift the handle until it clicks into place (Fig.a).
Ensure the frame opens correctly by checking that the
green line on the rear footrest is visible (see figure).
If this is not visible, pull the central handle upwards
forcefully.
CENTRAL BRAKE: To set the brake on the stroller, lower
the levers on the rear wheels with your foot (Fig.b).
To release the brakes, lift the levers.
4• HANDLE: It can be set at various heights. To adjust the
height of the handle, open the two levers outwards,
position the handle at the desired height and close the
two levers (Fig.a).
DRINK HOLDER: It can be fitted on both sides of the
Skate chassis. To fit it, slide the back of the drink holder
into the clips on the Skate chassis (Fig.b).
5• BASKET: It has adjustable elastic straps for securing
items. Before securing the straps, put them in the
required position (Fig.a).
It is possible to fit a, more capacious basket which is
provided (Fig.b).
6• FRONT SWIVEL WHEELS: To put the front wheels in
swivel mode, lift the stopper up (Fig.a). To turn off
swivel mode, press the stopper down (Fig.b).
Turn the wheels around once to lock them
automatically.
7• REMOVING THE WHEELS: To remove the rear wheels
from the Skate chassis, pull the pin and at the same
time pull off the wheels (Fig.a).
To remove the front wheels from the Skate chassis,
turn the attachment knobs until the indicators are red,
then pull off the wheels (Fig.b).
SKATE BASSINET UNIT
8• ASSEMBLING THE STRUCTURE: Lift the internal padding
(Fig.a) and the backrest (Fig.b).
9• Attach the tab to the head end of the Skate bassinet
unit (Fig c).
Caution: the central internal belt must be placed
between the tab and the backrest, as in the figure.
Put the backrest in the lowest position (Fig.d).
10• Turn and attach the two side tabs (Fig.a) and then the
one at the feet end (Fig.b) on the bottom of the inside
of the Skate bassinet unit.
11• Fold the padding back inside (Fig.a).
Lift the backrest and fit the mattress pad in place (Fig.b).
12• ATTACHING the Skate bassinet unit to the Skate
chassis: Before attaching the Skate bassinet unit, check
that the attachments on the Skate chassis are both in
the same position. They are correctly positioned when
the graphic symbols on the attachment points are in
line with the ones on the Skate chassis (Fig.a).
To attach the Skate bassinet unit, position its couplings
in their housing on the Skate chassis and click them
into place (Fig.b).
IMPORTANT: Pull the Skate bassinet unit upwards to
check that it is correctly attached.
IMPORTANT: If the Skate bassinet unit is incorrectly
attached, remove it from the Skate chassis and
correctly repeat the procedure described above.
IMPORTANT: Do not place a child in the Skate bassinet
unit before opening the Skate chassis.
13• FRONT BAR/CARRYING HANDLE: To fit the front bar,
put its attachments in their housing while pressing on
the safety buttons and pushing upwards until the two
clicks confirm it is in place. The front bar can only be
attached to the Skate bassinet unit in one direction.
14• The front bar can be set in 2 positions: a lower position
(1) for use as a front bar and a higher position (2) for
use as a carrying handle (Fig.a).
To carry a child – which is only possible in Skate
bassinet unit mode and with a child who weighs less
than 9 kg – use it in the higher position (2).
To adjust it, open the two levers inwards, position the
front bar in the desired position, and close the two
levers (Fig.b).
15• To release it, press the side buttons on the Skate
bassinet unit and pull the attachments of the front bar
downwards (Fig.a).
