706372
98
Verklein
Vergroot
Pagina terug
1/106
Pagina verder
93GB / IE / NI
- Attach the miter lock handle (10) to the
turntable (15).
- When fixing the saw to the workbench,
insert the mounting screws (not included)
through the mounting holes (16a).
•Inordertoadjusttheturntable(15)
loosen the mitre lock handle (10) approx.
2 turns.
•Pressthemitredetentlever(11)andturn
the turntable (15) and pointer (12) to the
desired angle measurement on the scale
(14), release the mitre detent lever (11)
and secure with the mitre lock handle
(10).
•Pressingthemachinehead(4)lightly
downwards and removing the fastening
bolt (30) from the motor bracket at the
same time disengages the saw from the
lowest position.
•Swingthemachinehead(4)upuntilthe
release lever (3) latches into place.
•Itispossibletosecuretheclamping
device (7) to the left or right on the
stationary saw bench. Insert the clamping
device (7) in the hole on the rear side of
the stop rail (17) and secure it with the
grip screw (28).
•Attachtheworkpiecesupports(8)tothe
fixed saw table (16) as shown in Figure
5 and fasten with the screw (29).
•Itispossibletotiltthemachinehead(4)
a max. 45° to the left by loosening the
locking screw (27).
8.2 Mitre angle setting
•Ninepositivemiterdetentsareprovided
for fast and accurate preset miter angles
– locations are at 45°, 30°, 22.5°, 15°
left and right, and center at 0°.
•Followtheprocessformitreanglesetting.
•Unlocktheturntablebyturningthemitre
lock handle (10) counter-clockwise.
•Movetheturntablewhilepressthemitre
detent lever (11) to align the mitre angle
pointer (12) to the desired degree on the
mitre angle scale (14).
•Ifthedesiredangleisoneofthenine
positive mitre detents, release the mitre
detent lever (11), making sure the lever
snaps into position, and then secure by
tightening the mitre lock handle (10).
•Ifthemitreangledesiredisnotoneofthe
nine positive mitre detents, simply lock
the turntable into desired angle position
by turning the mitre lock handle (10) in
the clockwise direction.
8.3 Precision adjustment of the
blade for crosscut 90°
(Fig. 1/2/6/7)
• Nostopangleincluded.
• Movethehead(4)inposition,sothat
the blade (6) rests directly above the
turntable (15). Now, use locking screw
(25) to lock the drag guide (26).
• Lowerthemachinehead(4)andsecure
using the fastening bolt (30).
•Loosenthebevellockingscrew(27).
•Positiontheanglestop(a)betweenthe
saw blade (6) and the turntable (15).
•Releasethelockingnut(c)andadjust
the adjusting screw (32) until the angle
between the saw blade (6) and turntable
(15) is 90°.
•Re-tightenthelockingnut(c).
•Subsequentlycheckthepositionofthe
angle indicator. If necessary loosen the
pointer (24) using a Philips screwdriver,
set to position 0° on the angle scale (23)
and re-tighten the retaining screw.
8.4 Precision adjustment of stop
rail for crosscut 90°
(Fig. 1/8/9)
- Bring the power tool into the working
position.
- Turn the turntable (15) to the 0° on the
mitre angle scale (14). The metre detent
lever
11
must be felt to engage in
the detent.
Attachment and operation
98

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Parkside-PZKS-1500-B2---IAN-280657

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PZKS 1500 B2 - IAN 280657 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PZKS 1500 B2 - IAN 280657 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info