558707
11
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
13 GB/IE/CY
Operation
CAUTION: Be sure to fix / secure the
saw blade
4
again after each change
of angle setting.
Q
Switching on and off
The table saw has a soft start system.
This produces a short
delay when the ma-
chine starts.
To switch on:
j Press the green switch I of the ON / OFF
switch
16
.
Switching off the device:
j Press the green switch 0 of the ON / OFF
switch
16
.
Emergency switch off:
j Press the cover of the ON / OFF switch
16
closed.
Unlocking the ON / OFF switch cover:
j Slide the emergency knob upwards and flip
the ON / OFF cover upwards.
Q
Attaching the guide fence
Attach the guide fence
1
by hooking it
on to both sides of the saw table
5
and pressing the handle downwards.
“HIGH” setting (see Fig. N):
j Attach the guide fence attachment
1a
with its
broader side to the guide fence
1
.
Set the desired cutting width on the centimetre
scale “High”.
“LOW” setting (see Fig. N):
j Attach the guide fence attachment
1a
with the
narrower side to the guide fence
1
.
Set the desired cutting width on the centimetre
scale “Low”.
Q
Attaching the mitre guide
Note: Use the mitre guide
8
only when fully in-
stalled (with the guide rails). Slide the mitre guide
8
from the front into the groove
6
in the saw
table
5
. The angle can be set to ± 60° by loosen-
ing the mitre guide handle
8c
.
Angle stop:
With the three stops
8a
you can set at angles of
± 90° / ± 45° using the angle stop
8d
(see Fig. L).
Q
Sawing
Straight cut:
j First set the required blade height.
j You can set the inclination angle if required.
j Attach the guide fence
1
.
j Sawing a long workpiece (≥ 2.5 m) needs
careful planning in advance. Work on long
workpieces should be carried out together with
a second person who is experienced and
knows how to use the saw. This person is there
to hold and support the workpiece. Ensure that
the second person is also wearing all the rec-
ommended protective clothing.
j Switch on the machine as described above.
j Push the workpiece evenly in the direction of
the saw blade
4
(see Fig. F). Saw the work-
piece in one complete sawing operation.
Use the push stick
12
if the distance between
the guide fence
1
and the saw blade
4
is
≤ 120mm.
j Switch off the machine immediately if you are
not going to continue to use it.
Mitred cuts:
j Set the required blade height.
j You can set the angle if required.
j Attach the mitre guide.
j First slide the mitre guide
8
into the groove
6
.
j Loosen the handle of the mitre guide using the
clamping screw
8c
, set the desired angle and
retighten the handle of the mitre guide using
the clamping screw
8c
.
j Press the workpiece against the mitre guide
8
.
j Switch on the machine as described above.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Parkside-PTKS-1800---KH-3160

Zoeken resetten

  • Heb jaren geleden een zaagtafel: PTKS 1800 SE aangeschaft, door omstandigheden nooit in gebruik genomen! Nu dat ik de zaagtafel in gebruik wilde nemen, krijg het apparaat niet aan de gang! De gebruiksaanwijzing 2 x doorgenomen, maar geen oplossing gevonden! Ligt het probleem in het gegeven dat de machine al vele jaren ongebruik stil staat? Wat doe ik mogelijk verkeerd?? Gesteld op 14-6-2023 om 13:23

    Reageer op deze vraag Misbruik melden
  • Ben in het bezit gekomen van een Parkside PTKS 1800 SE KH 3160 hij start niet altijd . Ik ben op zoek naar een elektrische schema van dit app. Dat ik kan zien wat ik eventueel moet vervangen. Misschien kunt U mij dat via dat via email toesturen.
    Alvast bedank. Of kunt U mij zeggen waar ik dat kan vinden?
    Paul Heeren
    040-2427860 Gesteld op 17-3-2023 om 10:22

    Reageer op deze vraag Misbruik melden
  • Hallo zou Je mij een aansluit schema van de schakelaar van de tafelzaag machine pk’s 1800 Gesteld op 3-10-2020 om 13:14

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PTKS 1800 - KH 3160 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PTKS 1800 - KH 3160 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Parkside PTKS 1800 - KH 3160

Parkside PTKS 1800 - KH 3160 Gebruiksaanwijzing - Nederlands, Deutsch, Français - 38 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info