558707
12
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
14 GB/IE/CY
Operation
j Slide the mitre guide
8
evenly forward, see
fig. G. Saw the workpiece in one operation.
j Switch off the machine immediately if you are
not going to continue to use it.
Q
Setting the riving knife
WARNING!
The riving knife
3
is one of
the integrated safety devices and must always be
correctly installed. The distance between the outside
edge of the saw blade
4
and the riving knife
3
must be between 3 and 5 mm (see Fig. I).
j Turn the blade height adjustment wheel
14
to
raise the saw blade
4
fully and incline the
saw blade
4
at 45° using the blade angle
adjustment thumb knob
18
. Take off the blade
guard
2
.
j Remove the table insert
7
.
To do this, unscrew the two screws using a
cross-head screwdriver.
j Unscrew the fittings on the cover plate
23
and
swing the plate away. To do this it is necessary
to set the saw blade
4
inclination back to 0°.
j Loosen the screws and align the splitter
3
.
Retighten the screws.
j Attach the cover plate
23
, the table insert
7
and the blade guard
2
.
Q
Changing the saw blade
WARNING!
Before you carry out any work
on the device always pull the mains plug out of the
mains socket.
WARNING!
Wear protective gloves when
replacing the saw blade
4
. Even a stationary saw
blade can cut or cause injury.
j Wind the saw blade
4
upwards using the ad-
justment wheel
14
and incline it by 45° using
the blade angle adjustment thumb knob
18
.
j Take off the blade guard
2
.
j Remove the table insert
7
. To do this, unscrew
the two screws using a cross-head screwdriver.
j Unscrew the fittings on cover plate
23
to the
saw blade
4
and swing the plate away.
j Hold the saw blade
4
in position with the
counter key
10
and slacken the clamping screw
24
with the supplied combi-tool
11
, see Fig E
and Fig. M. Remove the clamping flange
25
.
j Remove the saw blade
4
.
j Clean the clamping surfaces.
j Place the new saw blade in position.
Only suitable saw blades are to be used.
See the sections “Technical information”.
Take note of the direction of rotation and the
correctly installed position of the saw blade.
Saw blades must be mounted properly. Ensure
that they are balanced, rotate smoothly and
cannot come loose.
j Put on the clamping flange
25
and attach the
clamping screw
24
. Tighten fully with the com-
bi-tool
11
whilst holding it still with the counter
key
10
.
j Attach the cover plate
23
, the table insert
7
and the blade guard
2
.
Q
Transport
j When moving the table saw do it with another
person and hold the saw at the recesses in the
housing.
Q
Keeping your table saw safe
and secure
j Prevent unauthorised people from gaining
access to your table saw.
j Take care to see that no one can be injured by
your table saw.
j Disconnect the table saw from the mains.
j Disconnect the vacuum extraction device from
the table saw.
j Align the saw blade
4
to a blade angle of
0° and set the cutting depth to the minimum.
j Ensure that the bottom edge of the dust extrac-
tion cowl / blade guard
2
lies fully on the
saw table
5
.
j Attach the guide fence
1
and the mitre guide
8
to the saw table
5
.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Parkside-PTKS-1800---KH-3160

Zoeken resetten

  • Heb jaren geleden een zaagtafel: PTKS 1800 SE aangeschaft, door omstandigheden nooit in gebruik genomen! Nu dat ik de zaagtafel in gebruik wilde nemen, krijg het apparaat niet aan de gang! De gebruiksaanwijzing 2 x doorgenomen, maar geen oplossing gevonden! Ligt het probleem in het gegeven dat de machine al vele jaren ongebruik stil staat? Wat doe ik mogelijk verkeerd?? Gesteld op 14-6-2023 om 13:23

    Reageer op deze vraag Misbruik melden
  • Ben in het bezit gekomen van een Parkside PTKS 1800 SE KH 3160 hij start niet altijd . Ik ben op zoek naar een elektrische schema van dit app. Dat ik kan zien wat ik eventueel moet vervangen. Misschien kunt U mij dat via dat via email toesturen.
    Alvast bedank. Of kunt U mij zeggen waar ik dat kan vinden?
    Paul Heeren
    040-2427860 Gesteld op 17-3-2023 om 10:22

    Reageer op deze vraag Misbruik melden
  • Hallo zou Je mij een aansluit schema van de schakelaar van de tafelzaag machine pk’s 1800 Gesteld op 3-10-2020 om 13:14

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PTKS 1800 - KH 3160 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PTKS 1800 - KH 3160 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Parkside PTKS 1800 - KH 3160

Parkside PTKS 1800 - KH 3160 Gebruiksaanwijzing - Nederlands, Deutsch, Français - 38 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info