595406
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
GBGB
GB
GBGB
not performed by our authorized service
branch will void the warranty.
Procedure in the case
of warranty
Please follow the instructions below to ensure
quick processing of your claim:
Please retain proof of purchase and the arti-
cle number (e.g., IAN). The product number
can be found on the type plate, an engraving,
the cover page of your instructions (bottom
left) or the decal at the back or bottom. In
the event of malfunctions or other defects
please first contact the service department
below by phone or e-mail. A product recor-
ded as defective, along with the proof of
purchase (sales receipt) and a description
of the defect and when it occurred, can then
be returned free of charge to you to the ser-
vice address provided.
How to contact us:
GB
Name: C. M. C. GmbH
Website: www.cmc-creative.de
E-mail:
service.gb@cmc-creative.de
Phone: 0-808-189-0652
(Standard German land-
line charges)
Registered office: Germany
IAN 96959
Please note that the following address is not
a service address.
Please initially contact the named Service
Centres.
Address:
C. M. C. GmbH
Katharina-Loth-Str. 15
66386 St. Ingbert
Germany
Environmental instructions
and disposal information
Don‘t waste, recycle!
Device, accessories and packa-
ging should be recycled in an
environmentally friendly manner.
Do not dispose of the air tool with your house-
hold waste, or throw into fire or water.
If possible, non-operational equipment should
be recycled. Contact your local retailer for
information.
EU Conformity
Declaration
We,
C. M. C. GmbH
Responsible for documentation:
Markus Zimmer
Katharina-Loth-Str. 15
66386 St. Ingbert
declare in our sole responsibility that the
product
Pneumatic tyre inflator
Serial number: 1727
Year of manufacture: 2014 / 32
IAN: 96959
Model: PARKSIDE PNEUMATIC TYRE
INFLATOR PDR A1
Complies with the following EU norms,
guidelines and directives:
Machinery Directive
(2006 / 42 / EC)
applicable harmonised standards
NF EN 1953:2013
DIN 31000:2011-05
Using the pneumatic
tyre inflator
Connect the unit to a compressed air
supply.
Press the trigger
6
to start the air flow.
Release the trigger
6
to stop the air
flow. The air pressure can be read off
the pressure gauge
1
.
If you have inflated too much air into the
article: Press the air release button
3
to
release some of the air.
Press the lever down on the valve plug
and pull off the valve cap from the valve.
Disconnect the unit from the compressed
air source after finishing the work.
Warning: First of all, disconnect the tube
from the compressor and when you have
done this, disconnect the supply pipe from
the unit. Following these instructions will
stop the supply pipe from twirling around
all over the place.
M
aintenance and Cleaning
DANGER OF INJURY
!
The device requires no maintenance.
Do not use corrosive or aggressive cle-
aning agents. Do not allow any liquids
to
enter the device. Otherwise the device
could be damaged.
Clean the casing with a dry cloth.
Service
Only allow your unit to be maintained and
serviced by qualified service personnel. This
will maintain the safety features of your unit.
Warranty
Creative Marketing Consulting
GmbH warranty
Dear customer, the warranty for this device
is 3 years from the date of purchase. In the
event of product defects you have legal rights
against the retailer of this product. Your
statutory rights are not limited in any way by
our warranty detailed below.
Warranty terms
The warranty period begins on the date of
purchase. Please retain the original receipt
safely. This document is required as your
proof of purchase.
Should this device show any fault in materi-
als or manufacture within 3 years from date
of purchase, it will be repaired or replaced
- at our choice - by us free of charge. This
warranty is conditional on the defective de-
vice and the receipt of purchase being pre-
sented within the 3 year warranty period, and
that there is a brief written description of the
nature of the defect and of the date it arose.
If the defect is covered by our warranty, we
will return the repaired equipment or repla-
cement thereof. A repair or exchange of the
equipment does not extend a new warranty
period.
Scope of warranty
The appliance has been manufactured to st
rict
quality guidelines and meticulously examined
before delivery.
The warranty applies to faults in material or
manufacture. This guarantee does not apply
to product parts which are subject to normal
wear and tear and can be regarded as wea-
ring parts, or for damage to breakable parts,
e.g., switch, rechargeable batteries, or parts
which are made of glass.
This warranty becomes void if the device has
been damaged or improperly used or main-
tained. All instructions provided in the ope-
rating instructions must be followed strictly to
constitute proper use of the product. Uses and
actions contrary to those set out in the opera-
ting instructions, and which are ill-advised or
warned against, must be avoided at all cost.
This product is intended for private, non-com-
mercial use only. Any incorrect or improper
use of the device, use of force and changes
capacities are limited must never be allo-
wed to use the device without supervision
or instruction by a person responsible
for their safety. Please ensure that child-
ren cannot play with this unit.
Check the unit after
filling with compressed air using a tested
pressure gauge.
EXPLO-
SION HAZARD! Use this
device in well-ventilated areas
only. Never use petrol or other flamma-
ble liquids to clean the air tool! Sparks
could ignite residual vapours inside the
compressed air equipment resulting in the
compressed air equipment exploding.
RECOIL! When used
under high pressure conditions, recoil
can
occur which can cause danger due to
constant pressurisation.
RISK OF INJURY!
Never point the air jet towards yourself
or other people, animals, or electrical
equipment.
During maintenance, switch off the
compressed air supply.
Never exceed the maximum permitted
operating pressure of 10 bar. Use a
pressure reducer to adjust the operating
pressure.
Switch the device off if you do not use it
anymore.
First of all, disconnect the tube from the
compressed air source and when you
have done this, disconnect the supply
pipe from the unit. Following these in-
structions will stop the supply pipe from
twirling around all over the place.
For your own protection, please wear
suitable protective clothing.
Keep children and other persons away
from the equipment during use.
Do not use the equipment when tired or
under the influence of drugs, alcohol or
medications. One moment of careles
sness
when using the equipment may result in
serious injuries. Distractions can cause
you to lose control of the device.
Before any repair and maintenance work
or transport, remove the device from the
compressed air source.
Before using the unit, check it for da
mage,
and especially for light damage or da-
mage to the protective systems. These
must be thoroughly checked to confirm
that they are indeed completely capa-
ble of performing their intended tasks.
All unit parts must be correctly assembled
and comply with all guidelines in order
to ensure correct and safe operation.
If you ascertain that the unit is indeed
damaged, you are not permitted to use
it. Do not bend the unit’s pipe. This could
cause damage.
Warning! Please observe all manu-
facturer’s instructions regarding inflatable
articles.
Never remove model numbers. They are
safety-relevant parts of the unit. If you
have no experience of working with this
unit, please undertake a training course
to acquaint you with the dangers of em-
barking on such a venture.
Original Accessories /
Auxiliary equipment
Use only the accessories and attachments
detailed in the operating instructions.
Using other types of additional parts
can cause danger.
Start-up
Connecting the
compressed air source
Warning: Never exceed the maximum
permitted operating pressure of 10 bar.
Warning: In order to regulate the pressure,
the compressed air source must be fitted with
a pressure regulator.
Connect the unit to a suitablecompres-
sed air source. Now connect the supply
pipe using the quick-release connector to
the coupling plug on the pneumatic tyre
inflator.
Pneumatic tyre inflator PDR A1
Introduction
Congratulations!
You have chosen high-quality de-
vice by our company. Familiarise
yourself with the product before using it for
the first time. In addition, please carefully
refer to the operating instructions and the
safety advice below. Initial operation of this
tool must be performed by trained personnel.
Keep these instructions in a safe place. If you
pass the device on to anyone else, please
ensure that you also pass on all the docu-
mentation.
Intended use
With suitable accessories the pneumatic tyre
inflator can be used to pump up and regu-
late the air pressure in bicycle tyres, inflatable
dinghies, air beds, balls, etc. This article is
not to be used contrary to the stipulated
conditions of intended use detailed in the in-
struction leaflet. The manufacturer accepts
no responsibility for damage or injury result-
ing from non-observance of the instructions
or from any form of misuse. This device has
been designed for household use and may
not be used for commercial or industrial pur-
poses.
Features
1
Pressure gauge
2
Pneumatic tyre inflator
3
Air outlet button
4
Compressed air nozzle
5
Tube with valve plug
6
Trigger
Scope of delivery
1 Pneumatic tyre inflator
1 Set of operating instructions
Technical Data
Operating pressure: max. 10 bar
Compressed air quality: Cleansed, oil-free
and free of con-
densation
Volume flow: Standard flow:
600 l / min.
Sound pressure level: 55 dB (A)
Acoustic capacity: 60 dB (A)
Measured value
Corresponds to: EN ISO 14462
Safety information
Basic safety measures
must be followed when using compressed
air devices to eliminate the risk of fire, electric
shock and personal injury. Be sure to read
and follow the notices within these opera-
ting instructions prior to using the equipment
and store them in a safe location. The ma-
nufacturer assumes no liability for damages
or personal injury resulting from failure to
follow these operating instructions.
Children or persons who lack the know-
ledge or experience to use the device or
whose physical, sensory or intellectual
C. M. C. GmbH
Katharina-Loth-Str . 15
66386 St. Ingbert
Germany
Version des informations · Stand der
Informationen · Last Information Update:
06 / 2014 · Ident.-No.: PDRDA1062014-FR
St. Ingbert, 30.06.2014
Karl Peter Uhle
- Managing Director -
The following pictograms are used in these operating instructions /
on the equipment:
Please read the operating
instructions!
Never point the device at people
or animals.
Observe the warning and
safety instructions!
Keep children away from the
device!
Wear ear protection, dust
mask, safety glasses and
protective gloves.
Dispose of packaging and device
in an environmentally-friendly way!
96959_par_Druckluft-Reifenfueller_(480x630)_FR.indd 2 27.06.14 12:53
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PDR A1 - IAN 96959 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PDR A1 - IAN 96959 in de taal/talen: Frans als bijlage per email.

De handleiding is 0,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Parkside PDR A1 - IAN 96959

Parkside PDR A1 - IAN 96959 Gebruiksaanwijzing - Nederlands, Deutsch, English - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info