558597
16
Verklein
Vergroot
Pagina terug
1/97
Pagina verder
PARKSIDE
A finely adjusted torque ensures the highest pre-
cision in all screwdriving conditions. Start off with
a low setting (1 or 2 on the scale
̇) and try in-
creasing it by stages until the best setting is
reached.
The 16 torque settings cover the range up to ap-
prox. 8 Nm.
If the value of the set torque is reached, the ma-
chine disengages the drive connection to the
chuck. By doing this, screws can be driven to a
predetermined depth, which is ideal for repetitive
work.
For drilling, turn the selector to the setting.
Slide the selector forward (setting:Drill) to work
with the tool set at its optimum for drilling.The full
torque of approx. 18 Nm is applied.
Automatic – spindle lock – a simple
way to change bits
Your rechargeable electric drill driver has a fully au-
tomatic spindle lock and is fitted with an en-
closed keyless chuck incorporating the latest tech-
nology ”Made in Germany”.
Once the motor has come to a halt, the drive shaft is
automatically locked so that the chuck
can be
opened simply by turning it .
After you have inserted the required bit and fixed it
in place by turning the chuck , you can immedi-
ately continue working (the symbols above show the
direction of rotation viewed into the workpiece, i.e.
with the chuck pointing away from you). The spindle
lock releases itself automatically when the motor is
started (by operation of ON/OFF switch
).
Sensitive – switch operation
The trigger switch allows you to exercise fine
control over the speed of the drill to suit the par-
ticular circumstances. On delicate workpieces for
example, you can work carefully by using light
pressure on the trigger switch.
Increasing the pressure on the trigger switch al-
lows you to increase the speed as necessary up to
the maximum.
To take screws out, just reverse the direction
by moving the switch
to rotate the shaft anti-
clockwise.
The integral electric brake ensures the shaft
quickly stops rotating – as soon as the trigger
switch is released – so that you can get to work
again fast.
Tips and tricks from the professionals
When screwing into wood, metal and other
materials you must always observe the
following advice:
1. Before you use
the drill driver, check whether the
screw or drill bit is properly fitted, i.e. centralised
in the chuck.
2. The dimensions and sha
pe of the screw bits make
them readily recognisable. If you are unsure al-
ways tr
y the particular screw bit out to see whether
it sits in the screw head without play. Try a num-
ber of different bits.
3. Torque: Smaller screws and bits in particular can
be easily damaged or become worn if they are
used with too high a torque and/or speed.
4. Hard screw
bed: Particularly high torques can oc-
cur e.g. with metal screws used with socket tool
bits. Select a low speed.
5. Soft screw
bed: The torque is small. You should
however also select a low speed in order not to
damage the workpiece surface by contact with the
metal screw head. Use a countersink.
When drilling into wood, metal and other
materials you must always observe
the following advice:
1. With small diameter
drill bits use a high drill
speed. For large diameter drill bits, use a lo
w
drill speed.
2. For hard materials, select a low drill speed.For soft
materials, select a high drill speed.
3. Take the rotating drill bit out of the hole frequently
Operation
GB 17
manual PABS 18-2 neu2 23.03.2004 10:42 Uhr Seite 17
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside KH 3101 - PABS 18-2 SL bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside KH 3101 - PABS 18-2 SL in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Zweeds, Fins als bijlage per email.

De handleiding is 1,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info