558597
15
Verklein
Vergroot
Pagina terug
1/97
Pagina verder
PARKSIDE
Charging the battery pack
Before inserting the battery pack into the charger or
removing it from the charger, always ensure the plug
is not in the mains socket.
Insert the battery pack so that it is firmly held in
the charger. Push the plug into the mains socket.
The red charging light indicates that charging
has begun. The red light will go out after about
1 hour.
The green charging light lets you know when
charging is complete and the battery pack is rea-
dy for use.
If you wish to charge a second battery pack, pull
out the plug from the mains supply and keep the
charger off for at least 15 minutes. Then you can
start to charge the second battery.
Note: If you do not remove the plug from the mains
socket before the second charging process starts
then the second battery cannot be charged.
ƽ Caution!
A new battery pack is not charged and must be ful-
ly charged before first use.
Never charge the battery pack again immediate-
ly after a fast charging process has been complet-
ed. This can give rise to the battery pack being
overcharged and a reduced life of the battery and
charger.
Switch off the charger for at least 15 minutes be-
tween charges by removing the plug from the
mains socket.
If you use a multiway socket adapter, unplug all
other electrical equipment from the adapter.
Checking the battery condition
You can check the condition of the battery with the
battery in place.To do this, press the button (refer to
Fig. D) on the battery indicator
. The remaining
charge is displayed.
All lights on = full power / battery fully charged
Perfectly designed –
the ergonomics package
The motor housing is aligned at an angle of approx. 12°
to the handle. This ensures that for typical working
and handling situations the drill is at the correct an-
gle to the workpiece surface. In this way you can
work precisely and much more effectively – try it out
yourself ...
The particularly generously-sized controls ቧቢ
make it particularly quick to adjust the way the tool
works to the suit the task in hand.
The SOFTGRIP handle reduces vibrations and
makes working with your drill more comfortable,
refer to Fig. A.
The integrated hand guard is another ergonomic
feature. It protects you from injuries,e.g.when you
are drilling.
Switch speeds – the 2 gear drive
In first gear (switch in setting: Screw) a speed
of up to approx. 500 rpm can be achieved. This
setting is intended for use with old screws and for
accessories.
In second gear (switch in setting: Drill/2) the
speed is up to approx. 1400 rpm for drilling.
Robust and strong – the motor
The powerful motor guarantees a high torque. It works
on 18 Volts, provides a maximum torque of 18 Nm
and reaches speeds of approx. 1400 rpm. The inte-
gral electric brake ensures the tool comes to a halt
almost immediately,so that you can work more safe-
ly and quickly.
Controllable – the torque selector
Before you start screwdriving you can set the torque
selector
in any of 16 torque settings to obtain the
desired torque.
Operation
16 GB
manual PABS 18-2 neu2 23.03.2004 10:42 Uhr Seite 16
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside KH 3101 - PABS 18-2 SL bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside KH 3101 - PABS 18-2 SL in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Zweeds, Fins als bijlage per email.

De handleiding is 1,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info