748074
27
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
27
IEGB
tools are dangerous in the hands of un-
trained users.
Maintain power tools. Check for
misalignment or binding of mov-
ing parts, breakage of parts and
any other condition that may af-
fect the power tool’s operation.
If damaged, have the power tool
repaired before use. Many acci-
dents are caused by poorly maintained
power tools.
Keep cutting tools sharp and
clean. Properly maintained cutting tools
with sharp cutting edges are less Iikely to
bind and are easier to control.
Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be per-
formed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Carefully inspect the area to be cut and
remove all wires or other foreign bodies.
Service
Have your power tool serviced
by a qualied repair person us-
ing only identical replacement
parts. This will ensure that the safety of
the power tool is maintained.
Safety notices for milling
cutters
Warning! Milling can result in
the formation of dusts hazardous to
health (e.g. arising from materials
with paints containing lead, materi-
als containing asbestos or some
wood types), which can pose a risk
to the operator or persons nearby.
Make sure that the workplace is
well ventilated. Always wear safety
goggles and respiratory protection.
Attach a dust extraction system.
Hold the power tool on the insu-
lated handle surfaces, as the cut-
ter might hit its own power cable.
Contact with a live wire can also cause
a charge in metal parts of the appliance
and result in an electric shock.
Fasten and secure the workpiece
by means of clamps or with
another method on a stable un-
derground. If you hold the workpiece
only with your hand or against your own
body, it will stay instable and this can
lead to a loss of control.
The permissible rotation speed of
the attachment tools must be at
least as high as the highest rota-
tion speed indicated on the pow-
er tool. Accessories that run faster than
the permissible speed can be destroyed.
Cutters and other accessories
must be exactly matching the
tool holder (collet chuck) of your
power tool. Attachment tools that are
not exactly matching the tool holder of
the power tool rotate unevenly, vibrate
very strongly and can ultimately lead to
a loss of control.
Ensure that the cutter is assem-
bled correctly. A cutter that is not as-
sembled correctly can break during the
milling or be ejected and present a risk
of injury.
Move the power tool against the
workpiece only when it is turned
on. Otherwise, there is a risk of kick-
back if the attachment tools jam in the
workpiece.
Do not put your hands in the cut-
ting area and neither on the cut-
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 304379 POF 1200 C2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 304379 POF 1200 C2 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 3,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info