748151
24
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
17GB/IE
Remaining hazards can be minimized by following the
instructions in „General safety instructions“ „Proper Use
and in the entire operating manual.
6. Technical data
Electro motor
230 - 240 V∼ 50 Hz
Power
S1 350W*
Revolutions n
0
1400 min
-1
Saw band length
1400 mm
Saw band width
3,5-12 mm
Saw band width max.
12 mm
Cutting speed
900 m/min
Passage height
0 - 80 mm
Passage width
200 mm
Table size
300 x 300 mm
Slewing range of the table
0° bis 45°
Max. size of the workpiece
400 x 400 x 80 mm
Overall weight
14,8 kg
Subject to technical modifications!
* Operating mode S1, continous operation.
The work piece must have a minimum height of 3 mm and a
minimum width of 10 mm.
The total noise values determined in accordance with EN
61029.
Sound pressure level L
pA
77,4 dB(A)
Uncertainty K
pA
3 dB
Sound power level L
WA
90,4 dB(A)
Uncertainty K
WA
3 dB
Wear hearing protection!
The effects of noise can cause a loss of hearing. Keep the
noise level and vibration to a minimum!
Only use faultless devices.
Maintain and clean the device at regular intervals.
Adapt your working methods to the device.
Do not overload the device.
Have the device checked if necessary.
Switch the device off if it is not in use.
7. Before starting the equipment
Make sure the machine stands securely, i.e. bolt it to a work-
bench or solid base. There are two holes for this purpose in
the machine foot.
The saw table must be mounted correctly.
All covers and safety devices have to be properly fitted
before the machine is switched on.
It must be possible for the blade to run freely.
When working with wood that has been processed be-
fore, watch out for foreign bodies such as nails or screws
etc.
Blades that are misshapen or damaged in any way must
not be used.
If the table insert is worn, replace it.
Never operate the machine if either the door protecting
the blade or the detachable safety device are open.
Ensure that the choice of blade and the selected speed are
suitable for the material to be cut.
Do not begin cleaning the blade until it has come to a com-
plete standstill.
For straight cuts of small workpieces against the longitudi-
nal limit stop the push stick has to be used.
Wear gloves when handling the saw blade and rough
materials
The bandsaw blade guard should be in its lowest position
close to the bench during transport.
For miter cuts when the table is tilted, the parallel stop must
be positioned on the lower part of the table.
Never use guards to lift or transport items.
Ensure that the bandsaw blade guards are used and cor-
rectly adjusted.
Keep your hands a safety distance away from the band-
saw blade. Use a push stick for narrow cuts.
The push stick has to be stored on the intended device, so
that it can be reached from normal working position and is
always ready to be used.
In the normal operating position the operator is in front of
the machine.
Warning! This electric tool generates an electromagnetic
field during operation. This field can impair active or pas-
sive medical implants under certain conditions. In order to
prevent the risk of serious or deadly injuries, we recommend
that persons with medical implants consult with their physi-
cian and the manufacturer of the medical implant prior to
operating the electric tool.
Remaining hazards
The machine has been built using modern technology in
accordance with recognized safety rules. Some remaining
hazards, however, may still exist.
Risk of injury for fingers and hands by the rotating saw
band due to improper handling of the work piece. Risk of
injury through the hurling work piece due to improper han-
dling, such as working without the push stick.
Risk of damaging your health due to wood dust and wood
chips. Wear personal protective cloth such as goggles.
Use a fitting dust extractor.
Risk of injury due to defective saw band. Regularely check
saw band for such defects.
Risk of injury for fingers and hands while changing saw
band. Wear proper gloves.
Risk of injury due to starting saw band while switching on
the machine.
The use of incorrect or damaged mains cables can lead to
injuries caused by electricity.
Wear only closefitting clothes. Remove rings, bracelets
and other jewelry.
For the safety of long hair, wear a cap or hair net. Even
when all safety measures are taken, some remaining haz-
ards which are not yet evident may still be present.
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 303408 PBS 350 A1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 303408 PBS 350 A1 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 3,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info