746866
21
Verklein
Vergroot
Pagina terug
1/90
Pagina verder
PDSS 16 A1
18 
GB
IE
Hazards in the workplace
Slipping, tripping up and falling are the main
causes of injuries in the workplace. Pay atten-
tion to surfaces that may have become slippery
from the use of the compressed air tool and
tripping hazards caused by air or the hydraulic
hose.
Proceed with caution in unknown surroundings.
Hidden hazards caused by power or other
supply lines may be present.
This compressed air tool is not suitable for use
in explosive atmospheres and is not insulated
against contact with power sources.
Make sure (e.g. by using a metal detector) that
there are no hidden power, water or gas lines
in the location where you are working.
Hazards caused by dust and vapours
The dusts and vapours produced by using the
machines for screw connections can be hazard-
ous to health (e.g. cause cancer, birth defects,
asthma and/or dermatitis); it is essential to
carry out a risk assessment in respect of these
risks and to implement corresponding regula-
tory mechanisms.
The risk assessment should include the dust
caused by using the machine and any existing
dust that may be raised at the same time.
The compressed air tool is to be operated and
maintained in accordance with the recommen-
dations contained in this manual to keep the
release of dust and vapours to a minimum.
The exhaust air should be extracted so that the
minimum amount of dust is raised in an already
dusty environment.
If dusts or vapours are created, the main priority
must be to control these at the site of their re-
lease.
All components of the compressed air tool or
accessories intended for collecting, extracting
or suppressing airborne dust or vapours or
should be used and serviced properly in ac-
cordance with the manufacturer’s instructions.
Consumables/tools should be selected, main-
tained and replaced in accordance with the
recommendations in this guide in order to avoid
unnecessary intensification of dust or vapour
production.
Use a dust mask as per the instructions provided
by your employer or as required by health and
safety regulations.
Working with certain materials can lead to
emissions of dust and vapours that are poten-
tially explosive.
Hazards caused by noise
Excessive noise levels in conjunction with insuffi-
cient hearing protection may lead to permanent
hearing damage, loss of hearing and other
problems, such as tinnitus (ringing, buzzing,
whistling or humming in your ears).
It is essential to carry out a risk assessment with
regard to these hazards and implement suitable
control mechanisms.
Suitable control mechanisms include measures
such as the use of insulating materials to avoid
ringing noises from occurring on the work-
pieces.
Use hearing protection as required by work and
health safety regulations.
The compressed air tool is to be operated and
maintained in accordance with the recommen-
dations contained in these instructions in order
to reduce any unnecessary increase of the noise
levels.
Consumables and the tool should be selected,
maintained and replaced in accordance with
the recommendations in these instructions in
order to avoid any unnecessary increase of the
noise levels.
The integrated silencer may not be removed
and must be in good working order.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 292167 PDSS 16 A1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 292167 PDSS 16 A1 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 3,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info