746866
19
Verklein
Vergroot
Pagina terug
1/90
Pagina verder
PDSS 16 A1
16 
GB
IE
Please ensure that you have read and understood
the safety instructions before fitting, operating,
repairing, servicing or replacing any accesso-
ries and before working near the compressed
air tool. Failure to do this can result in serious
bodily injury.
The compressed air tool should only be set up,
adjusted or used by adequately qualified and
trained operators.
The compressed air tool may not be modified.
Modifications can reduce the effectiveness of
the safety measures and increase the risks for
the operator.
Never use damaged compressed air tools.
Maintain compressed air tools with care. Check
regularly whether moving parts function correctly
and do not jam; check whether any parts are
broken or damaged to an extent that the com-
pressed air tool will no longer operate correctly.
Check signs and labels for completeness and
readability. If damaged, have parts repaired or
replaced before using the compressed air tool.
Many accidents are caused by poorly main-
tained compressed air tools.
Hazards caused by flying parts
If a workpiece or accessory of the compressed
air tool breaks, parts can be flung out at high
speeds.
Always wear impact-resistant safety goggles
during operation, when replacing accessory
parts or during repair or maintenance of the
compressed air tool. The level of the required
protection must be evaluated separately for
each individual task.
You must ensure that the workpiece has been
securely fixed in place.
Check regularly that the rotation speed of
the compressed air tool is not higher than the
specified rotation speed appended on the
compressed air tool. These rotation speed tests
must be conducted without any accessory tools
attached.
Ensure that sparks and fragments created during
work do not constitute a hazard.
Separate the compressed air tool from the com-
pressed air supply before replacing the attach-
ment or accessories or before you adjust the
settings, service or clean the tool.
Ensure that no dangers are created for other
persons either.
Hazards caused by entanglement
Dress properly. Do not wear loose clothing or
jewellery. Keep hair, clothing and gloves away
from the compressed air tool and moving parts.
Loose clothes, jewellery or long hair can be
caught in moving parts. There is a risk of per-
sonal injury.
Hazards during operation
Avoid contact with the rotating shaft and the
accessory tool to prevent cuts on your hands
and other body parts.
When using the machine, the operator's hands
can be subject to hazards such as cuts, grazing
and heat. Wear suitable gloves to protect your
hands.
The operator and maintenance personnel must
be physically capable of handling the size,
weight and power of the compressed air tool.
Hold the compressed air tool correctly:
be ready to counteract any normal or sudden
movements – keep both hands ready.
Keep proper footing and balance at all times.
Prevent unintentional starting. If the air supply is
interrupted, switch off the compressed air tool
on the On/Off switch.
Use only the lubricants recommended by the
manufacturer.
Use personal protective equipment. Always
wear eye protection. Wearing personal pro-
tective equipment such as protective gloves,
non-slip safety shoes or hearing protection,
depending on the type and use of the power
tool reduces the risk of personal injuries and it is
recommended.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 292167 PDSS 16 A1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 292167 PDSS 16 A1 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 3,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info