748012
24
Verklein
Vergroot
Pagina terug
1/87
Pagina verder
PEH 30 C3
20 
GB
IE
Replace the planing blade
when both cutting
edges are blunt.
Do not try to sharpen the planing blade
.
Turn the planing blade
or replace it.
NOTE
Do not undo the two hex socket screws.
These are used for adjusting the height of
the cutter block. Adjustment is only required
if you are using a different type of planing
blade, e.g. a rustic blade.
When changing the blade, always replace
both blades to prevent an imbalance.
First, unscrew only one blade. This will allow
you to orient your self on the factory-mounted
second blade when reassembling later.
Use the supplied open-ended spanner
to
undo the 3 fastening screws for the planing
blade .
Push the movable cutter block guard
into
the slot in the housing.
Push the clamping element
upwards out of
the cutter block .
Remove the tensioning plate
20a
from the clamp-
ing element . Remover the planing blade
from the clamping element .
Fit either a new or turned blade in the reverse
order.
Planing blades
can be purchased from the
address given below (see section “Service”).
Replacing the drive belt (see fig. E)
WARNING! RISK OF INJURY
Always remove the plug from the power
socket before working on the appliance.
Remove the screws
and detach the drive
belt cover .
Remove the worn drive belt
.
Fit the new drive belt
onto the small belt
wheel first and then turn the drive belt
and pull it onto the large belt wheel .
Replace the drive belt cover
and fix it in
place using the screws
.
Maintenance and cleaning
WARNING! RISK OF INJURY
Always remove the plug from the power
socket before working on the appliance.
Keep the appliance and the ventilation slits
clean to ensure fault-free operation.
Clean the chip ejector
regularly.
To clean a blocked chip ejector, use a suitable
tool (e.g. a piece of wood, compressed air,
etc.).
Use a dry cloth to clean the housing.
Use a brush to remove any dust stuck to the
appliance.
Never use sharp objects, petrol, solvents or
cleansers which can damage plastic. Do not
allow any liquids to get into the interior of the
appliance.
NOTE
Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline.
Disposal
The packaging consists of environmentally
friendly material. It can be disposed of in
the local recycling containers.
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner.
Your local community or municipal authorities can
provide information on how to dispose of the ap-
pliance.
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 291791 PEH 30 C3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 291791 PEH 30 C3 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 1,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info