748012
23
Verklein
Vergroot
Pagina terug
1/87
Pagina verder
PEH 30 C3
GB
IE
 19
External extraction:
When using dust extraction systems, e.g. a work-
shop extractor, it may be necessary to use the
adapter for external extraction
. The vacuum
cleaner must be suitable for the material being
processed.
Connecting:
Push the adapter for external extraction
firmly into the chip ejector .
Push the hose of a suitable dust extraction ap-
pliance (e.g. a workshop vacuum cleaner) onto
the chip ejector
(or the adapter for external
extraction , if required).
Removal:
Pull the hose of the vacuum cleaner off the chip
ejector
or the adapter.
Pull the adapter for external extraction
off.
Parking shoe (see fig. B)
The parking shoe allows you to put down the
appliance without risking damage to the work-
piece. While working, the parking shoe is
flipped up and rear part of the plane sole is
exposed.
Planing
CAUTION! RISK OF KICKBACK!
Always switch the appliance on before applying
it to the workpiece.
Set desired cut depth.
Switch the appliance on.
Place the appliance with the front part of the
plane sole
on the workpiece.
Move the appliance with straight, even motions
over the workpiece.
Push forward slowly and do not exert excessive
pressure on the plane sole
. Excessive speed
reduces the surface finish and can lead to a jam
in the chip ejector.
Chamfering edges
The V grooves in the front plane sole allow
easy chamfering of workpiece edges.
Use the V groove that corresponds to the chamfer
width required.
Place the planer with the V groove
onto the
workpiece edge and guide it forwards.
Using the rip fence
The fit the rip fence, guide the connecting screw
8b
through the connecting piece
8a
and the rip
fence .
Screw the lock nut
onto the connecting
screw
8b
.
Fit the rip fence
onto the appliance using the
fastening screw .
Undo the lock nut
and set the desired width.
Retighten the lock nut
.
Ensure that the plane is applied with lateral
pressure.
Using the fold depth stop
Fit the fold depth stop onto the appliance
using the fastening screw
.
Set the desired fold depth using the fold depth
stop
.
Repeat the planing process several times until
the required fold depth is achieved.
Removing/replacing the planing
blade (see figs. C + D)
WARNING! RISK OF INJURY
Always remove the plug from the power
socket before working on the appliance.
CAUTION!
There is a risk of injury due to the cutting edges
of the planing blade
!
Never touch the planing blade on its cutting
edges.
The planing blade has two cutting edges and
can be turned.
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 291791 PEH 30 C3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 291791 PEH 30 C3 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 1,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info