745935
13
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
13
NIIEGB
3. Release the locking screw (18) on
the depth limit (17).
4. Loosen the clamping lever (19)
by pushing it upward.
5. Slowly press down the machine
until the cutter contacts the work-
piece.
6. Fasten the clamping lever (19) by
pushing it to the left.
Rough adjustment:
7. Slide the depth stop (17) down-
ward until it rests on the step limit
(14).
8. Adjust the depth stop (17) to the
desired cutting depth and tighten
the locking screw (18).
Fine adjustment:
9. For the ne adjustment, turn the
rotary knob (2) to the desired
measure, wherein one complete
rotation equals 1 mm:
counter-clockwise rotation: great-
er cutting depth
clockwise rotation: lesser cutting
depth
10. After the ne adjustment, you can
set the scale below the rotary
knob (2) to the “0” position. For
this purpose, press the ring (2a)
below the rotary knob downward
and turn it into the desired posi-
tion.
We recommend testing the cutting
depth adjustment by means of a test
cut on a reject piece.
Gradual milling
To mill in multiple steps with greater cutting
depth, the cutting depth can be adjusted
with the step limit (
14).
1. Turn the step limit ( 14) so that it
engages in the highest step below the
depth stop (
17).
2. Set the further cutting depth with the
lower steps of the step limit ( 14).
Operation
Wear breathing protection
(ne dust mask of protection class
PPP2).
Switching on and off
1. Connect the machine to the pow-
er supply.
Make sure that the net voltage
matches the voltage rating indi-
cated on the device’s type plate.
2. Switching on: Keep the safety
lock (5) pressed and press the
on/off switch (6). Then release
the safety lock.
3. Switching off: Release the on/off
switch (6).
Pre-selecting the rotation
speed
You can pre-select the maximum rotation
speed on the handwheel for the rotation
speed pre-selection (
3). The on/off
switch (
6) can only be pressed up to
the specied speed.
Adjust the desired rotation speed on
the handwheel for the rotation speed
preselection (
3).
1-2 = low rotation speed
3-4 = medium rotation speed
5-7 = high rotation speed
The suitable rotation speed is pre-selected
depending on the work material, the cutter
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 275390 POF 1200 B2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 275390 POF 1200 B2 in de taal/talen: Nederlands, Duits, Engels, Deens als bijlage per email.

De handleiding is 4,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Parkside IAN 275390 POF 1200 B2

Parkside IAN 275390 POF 1200 B2 Gebruiksaanwijzing - Français, Italiano - 84 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info