745342
8
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
5
PFS 710 C2
GB
IE
Appliance-specific safety instructions
To avoid the risk of injury or fire as well as
health risks:
Hold the power tool by the insulated grip-
ping surfaces when carrying out work
during which the power tool may contact
hidden power cables or the device’s mains
lead. Contact with a live cable can also make
metal parts of the appliance live and could result
in an electric shock.
Wear a dust mask!
When working outdoors, connect the appliance
via a fault current circuit breaker with a maximum
tripping current of 30mA.
Secure the workpiece. Use clamps/vice to hold
the workpiece firmly in place. This is safer than
simply holding it in your hand.
Do not rest your hands next to or in front of the
appliance and the area being worked as there
is a risk of injury if you slip.
In case of danger, remove the power plug from
the socket immediately.
Always route the power cord towards the rear,
away from the appliance.
RISK OF FIRE DUE TO FLYING SPARKS!
If you are sawing metal, sparks will occur.
Ensure that nobody is put at risk and that no
combustible materials are located in the imme-
diate vicinity of your working space.
WARNING! TOXIC DUSTS!
Working with the tool can produce harmful/
toxic dusts which represent a health hazard
for the person operating the appliance and
for anyone else in the vicinity.
Wear safety goggles and a protective dust
mask!
Materials containing asbestos may not be pro-
cessed. Asbestos is a known carcinogen.
When sawing construction materials, make sure
to follow the statutory regulations and recom-
mendations from the manufacturers.
Never work on moistened materials or damp
surfaces.
Always switch the appliance on before applying
it to the material.
CAUTION!
Avoid contact with solid objects if the appli-
ance is running – risk of kickback!
The footplate
must always make contact with
the workpiece when the appliance is running.
Always switch the appliance off and allow it to
coast before putting it down.
Only use sharp saw blades which are in perfect
condition. Replace cracked, bent or blunt saw
blades immediately.
The appliance must always be kept clean, dry
and free from oil or grease.
Original accessories/auxiliary
equipment
Use only the accessories and additional
equipment that are specified in the operat-
ing instructions and are compatible with
the appliance. Using attachments or acces-
sory tools other than those recommended in
the operating instructions can lead to a risk of
injury.
Information on saw blades
You can use any saw blade provided it is fitted with a
suitable mount - 1/2“ (12.7 mm) universal shaft. Op-
timised saw blades in different lengths are available
from a retail store to suit every intended purpose.
NOTE
TPI = teeth per inch = the number of teeth per
2.54 cm
Wood saw blade
:
Dimensions: 152 x1.25 mm, 6 TPI
Best suitability: for sawing construction wood, chip-
board, panels and plywood, and also plunge cuts.
Bimetal saw blade
:
Dimensions: 152 mm, 18 TPI
Best suitability: for sawing sheet metal, profiles and
pipes – flexible and break-resistant.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 272950 PFS 710 C2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 272950 PFS 710 C2 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info