370467
35
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
35
RQT6817
Reference
Sound
Picture
Unit displays
Television displays
No sound.
Distorted sound.
Check the connections.
Turn the volume up.
Turn muting off.
Turn Advanced surround off if it causes distortion.
Switch off the unit, determine and correct the cause, then switch the unit on.
Causes include:
Shorting (bare wires touching) of positive and negative speaker wires.
Using speakers with an impedance lower than that rated for this unit.
Straining of the speakers through excessive volume or power.
Using the unit in a hot environment without proper ventilation.
7
28
19
Piercing noise comes from the
speakers.
If you have connected this unit to other equipment through the OPTICAL OUT terminal, ensure
you have selected the correct settings for “Dolby Digital”, “DTS Digital Surround” and “MPEG
§
in the SETUP menus’ Audio menu.
§
Only for the United Kingdom, Continental Europe, Russia, Australia and N.Z.
31
Effects do not work.
Dialogue enhancer and Advanced surround do not work when the unit is outputting bitstream signals.
Advanced surround does not work if you have changed the play speed.
23
Picture distorted. Some distortion is normal during SEARCH.
No picture. Check the connection.
Make sure the television is on.
Ensure the television’s video input setting (e.g., VIDEO 1) is correct.
8
The picture shown on the
television is not normal.
(The sides of the picture are cut
off, the picture is stretched
horizontally, or black bands
appear at the top and bottom of
the screen.)
Go to Video in the SETUP menus, and change “TV Aspect” to suit your television.
Use the television to change the aspect to the correct one.
[For\Australia,\N.Z.\and\Southeast\Asia]
If your television cannot change the aspect when input is progressive, try changing 4:3
Aspect with the GUI screen.
Ensure that the unit is connected directly to the television, and is not connected through a video
cassette recorder.
Change the size with the variable zoom function.
[For\Australia,\N.Z.\and\Southeast\Asia]
Connect to the component video (480P) input terminals on a television compatible with this
unit’s copy guard system. You cannot view progressive video if your television is not compatible.
30
25
18
8
[For\Australia,\N.Z.\and\Southeast\Asia]
There is ghosting when
progressive output is on.
Change “Video output mode” to “480I” so “PROGRESSIVE” on the display goes out. This
problem is caused by the editing method or material used on DVD-Video, but should be
corrected if you use interlace output.
25
Picture quality is poor. Check the settings in the GUI screen’s Picture Menu. 25
The picture on the television
disappears or stripes appear on
the screen.
The location and orientation of the antenna are incorrect. If you are using an indoor antenna,
change to an outdoor antenna.
The television antenna wire is too close to the unit. Separate the antenna wire of the television
from the unit.
33
Menus not displayed correctly. Change the zoom ratio to “k1.00”.
With the GUI screen, change “Subtitle Position” to “0”.
[For\Australia,\N.Z.\and\Southeast\Asia]
With the GUI screen, change “4:3 Aspect” to “Normal”.
18
25
25
The display is dark. Press and hold [SHIFT]i[DISPLAY] until the display returns to the original brightness. 28
“DVD NO PLAY You inserted a disc the unit cannot play; insert one it can.
You inserted a blank DVD-RAM.
5
“DVD NO DISC” You haven’t inserted a disc; insert one.
You haven’t inserted the disc correctly; insert it correctly.
13
“F61” Check and correct the speaker cord connections.
If this does not fix the problem, there is a power supply problem. Consult the dealer.
7
“DVD U11” Disc is dirty. Wipe it clean. 5
“ERROR” Incorrect operation performed. Read the instructions and try again.
“DVD H∑∑
∑∑ stands for a number.
Trouble may have occurred. The number following “H” depends on the status of the unit.
Reset procedure:
Press [Í] to switch the unit to the standby mode and then back to ON. Alternatively, press [Í]
to switch the unit to the standby mode, disconnect the AC mains lead, and then reconnect it.
If the service numbers fail to clear, note the service number and contact a qualified service
person.
“Cannot display group xx,
picture xx”
You are trying to display incompatible pictures.
[For\Australia,\N.Z.\and\Southeast\Asia]
“The progressive out is set to
“Disable””
Go to Video in the SETUP menus, and select “Enable” in “Progressive Out (Component)”. 30
No on-screen display. Go to Display in the SETUP menus, and select “On” for “On-Screen Messages”. 30
GUI screens not displayed or
only partially displayed on the
television.
Press [3, 4] while the rightmost icon is highlighted to move them down. 23
The disc’s menu is displayed in a
different language.
Go to Disc in the SETUP menus, and select the preferred language for “Menus”. 30
6817b-p26-36.fm 35 ページ 2003年7月4日 金曜日 午後6時18分
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic sc dp 1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic sc dp 1 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Panasonic sc dp 1

Panasonic sc dp 1 Gebruiksaanwijzing - Nederlands - 104 pagina's

Panasonic sc dp 1 Gebruiksaanwijzing - Deutsch, Français, Italiano - 104 pagina's

Panasonic sc dp 1 Gebruiksaanwijzing - Espanõl, Polski - 104 pagina's

Panasonic sc dp 1 Gebruiksaanwijzing - Dansk, Svenska - 104 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info