Preparing the remote control
Insert the battery (Lithium battery)
∫ Replacing the button-type battery
The battery normally lasts for about a year.
Replace if the remote control fails to oper-
ate the unit when used within the operation
range.
Replacement: CR2025
Note
Refer to “Precautions” on page 8.
Operation range
Note
≥Do not expose the remote control signal
sensor to bright light.
≥Do not place obstacles between the re-
mote control signal sensor and the re-
mote control.
≥Do not use another unit’s remote control
at the same time.
Using the AC adaptor
Note
Refer to “Precautions” on page 8.
∫ When the unit is not going to be used
for a long time
The unit consumes 3 W when in standby
mode.
To conserve power, disconnect the AC
mains lead from the mains socket.
12
VQT8645
Face + upwards.
Remote control
signal sensor
About 7 m in
front of the
signal sensor
To household mains
socket
The [Í] indicator lights.
Power supply
Front of this
unit
The unit is in the standby condition (the [Í]
indicator lights) when the AC mains lead is
connected. The primary circuit is always “live”
as long as the AC adaptor is connected to an
electrical outlet.
FOR UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 5 BEFORE
CONNECTION.
