511534
106
Verklein
Vergroot
Pagina terug
1/179
Pagina verder
[PROJECTOR SETUP] menu
106 - ENGLISH
Settings
10)
Set [BRIGHTNESS CONTROL GAIN]
of all projectors to 100%.
11)
Set [BRIGHTNESS CONTROL GAIN]
of the darkest projector to 90%.
12)
Adjust [BRIGHTNESS CONTROL
GAIN] to match the [BRIGHTNESS
CONTROL GAIN] set to 90% of the
other projectors.
13)
Set [MODE] in [BRIGHTNESS
CONTROL SETUP] of all projectors to
[AUTO], and [LINK] to [GROUP A].
14)
Select [APPLY] in [BRIGHTNESS
CONTROL SETUP] on all projectors
and press the <ENTER> button.
z
Luminance control starts.
Note
z
Brightness is automatically corrected each time the
lamp blinks when the power is switched on or off.
z
Adjust luminance control again when variation in
brightness has increased or a lamp is replaced.
[STANDBY MODE]
Set the power consumption during the standby.
1) Press

to select [STANDBY MODE].
2) Press
󱚣󱚤
to switch [STANDBY
MODE].
z
The setting will change as follows each time
you press the button.
[NORMAL] [ECO]
Note
z
When set to [ECO], network functions and <SERIAL
OUT> terminal, and some RS-232C commands are
not available during standby. The lighting for the
connecting terminals and control panel does not
turn on.
z
When an error or warning occurs, a self diagnosis
is displayed on the control panel regardless of the
[STANDBY MODE] setting. (
page 25)
z
When set to [ECO], the time taken to start display
may be approximately ten seconds slower than
compared to when set to [NORMAL].
[SCHEDULE]
Set the command execution schedule for each day of
the week.
1) Press

to select [SCHEDULE].
2) Press
󱚣󱚤
to switch [SCHEDULE].
z
The setting will change as follows each time
you press the button.
[ON] [OFF]
Note
z
If [SCHEDULE] is set to [ON], the setting for
[STANDBY MODE] is automatically set to
[NORMAL] and cannot be changed. Even if
[SCHEDULE] is then set to [OFF] when in this
state, the setting of [STANDBY MODE] remains at
[NORMAL].
How to assign a program
3) Select [ON] in Step 2), and press the
<ENTER> button.
z
The [SCHEDULE] screen is displayed.
4) Select and assign program to each day
of week.
z
Press

to select the day of week, and press
󱚣󱚤
to select a program number.
z
You can set the program from No.1 to No.7. “-
- -” indicates that the program number has not
been set yet.
How to set a program
You can set up to 16 commands to each program.
3) Select [ON] in Step 2), and press the
<ENTER> button.
z
The [SCHEDULE] screen is displayed.
4) Press

to select [PROGRAM EDIT].
5) Press
󱚣󱚤
to select a program number
and then press the <ENTER> button.
6) Press

to select a command
number and press the <ENTER>
button.
z
You can change the page using
󱚣󱚤
.
7) Press

to select [TIME] and press
the <ENTER> button.
8) Press
󱚣󱚤
to select hour and minute,
and press

or the number (<0> to
<9>) buttons on the remote control
to set a time, and press the <ENTER>
button.
9) Press

to select [COMMAND].
106

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic PT-DZ21KE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic PT-DZ21KE in de taal/talen: Engels als bijlage per email.

De handleiding is 17,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Panasonic PT-DZ21KE

Panasonic PT-DZ21KE Gebruiksaanwijzing - Deutsch - 190 pagina's

Panasonic PT-DZ21KE Gebruiksaanwijzing - Deutsch - 190 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info