Programmable settings
Problem Cause/solution
I cannot register a handset
to a base unit.
R The maximum number of handsets (6) is already
registered to the base unit. Cancel unused
handset registrations from the base unit (page 39).
Battery recharge
Problem Cause/solution
The handset beeps and/or
flashes.
R Battery charge is low. Fully charge the batteries
(page 10).
I fully charged the batteries,
but
–
still flashes,
–
is displayed, or
– the operating time
seems to be shorter.
R Clean the battery ends ( , ) and the charge
contacts with a dry cloth and charge again.
R It is time to replace the batteries (page 10).
Making/answering calls, intercom
Problem Cause/solution
is displayed. R The handset is too far from the base unit. Move
closer.
R The base unit’s AC adaptor is not properly
connected. Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit.
Register it (page 38).
Noise is heard, sound cuts
in and out.
R You are using the handset or base unit in an area
with high electrical interference. Re-position the
base unit and use the handset away from sources
of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend
connecting a filter (contact your DSL/ADSL service
provider) to the telephone line between the base
unit and the telephone line socket. Contact your
DSL/ADSL provider for details. (for Australia)
R If you use a DSL/ADSL (JetStream) service, we
recommend that you contact your DSL/ADSL
service provider to have a DSL/ADSL Splitter
installed. We do not recommend the use of
generic DSL/ADSL filters.Contact your DSL/ADSL
service provider for details. (for New Zealand)
66
Useful Information
