Microphone
Sensor range cap (Standard)
Infrared sensor
LED indicator
Lens unit
Speaker
M N
U
sed when registering the camera to the
hub.
Safety wire
Camera mounting stand
DC cable
LED indicator
Y
ou can use the LED indicator to confirm the
camera’s status.
Indicator Status
Off No power, or LED
i
ndicator is turned
off
*1
Green, lit
Normal operation
*
1
Green, blinking
s
lowly
Registration mode
Red Motion detected
Indicator Status
Red, blinking slowly Live images are
b
eing viewed or
recorded
Red, blinking Camera is out of
r
ange of the hub, or
device malfunction
Amber, blinking
s
lowly
Camera is not
registered to a hub
*1 You can configure the camera so that its
LED indicator does not light during
normal operation. For more information,
refer to the User’s Guide (page 25).
Setup overview
1 I
nitial setup
Make sure you can access the system
using your mobile device. For details,
refer to the System Setup Guide included
with your hub.
2 Registration
Required only if the camera was
purchased separately (i.e., not as part of
a bundle).
3 Confirm the installation area
Read the information in this document to
confirm that the desired installation area
is suitable to proper operation.
4 Installation
Install the camera in the desired location
and connect the camera to the power
outlet.
5 Adjust the infrared sensor range
Confirm the sensor range area and adjust
it if necessary using the included sensor
range adjustment caps.
14
For assistance, please visit http://shop.panasonic.com/support
Setup