39
RQT6536
Reference
38
RQT6536
Reference
On-Screen Menu Icons
are cut off or are not
displayed at all.
No On-Screen display.
“Check the disc.”
“X”
“UNPLAYABLE CARD”
“CHECK CARD”
“NO FILE”
“ ERROR 01”
“ ERROR 02”
“ ERROR 03”
“H ∑∑”
∑∑ stands for a
number.
“U11”
Use [3, 4] while the rightmost icon is highlighted to move them
down. J
Go to the Display menu in the SETUP screen, and select “On” for
“On-Screen Messages”. O
Clean the disc. 9
You are trying to play incompatible or corrupted data. This data
cannot be played.
The data cannot be played.
The card cannot be played or the unit failed to read the card.
Try reinserting it. >
Data the unit can play is not recorded on the card or you haven’t
inserted a card.
A problem has occurred with the battery pack. Consult your dealer.
The battery pack has been recharging for 12 hours but has failed to
recharge for some reason. Recharge again.
You are recharging in a location that is too hot or too cold. Recharge
at normal temperature.
Trouble has occurred. The number appearing after H depends on the
problem. Turn the unit off and on again. Alternatively, turn the unit off,
disconnect the power source (AC or battery pack) reconnect the
power and turn the unit on again.
If the service numbers fail to clear, note the service number and
contact a qualified service person.
Note
The following do not indicate malfunction.
≥Sound from the AC adaptor during recharging.
≥The battery pack warms up after recharging or during use.
Maintenance
∫ To clean this unit, wipe with a
soft, dry cloth.
≥Use eyeglass cleaner to remove stubborn dirt
from the LCD.
≥Never use alcohol, paint thinner or benzine to
clean this unit.
≥Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
Displays
∫ Maintenance of the lens
≥Remove dust carefully with an air blower for
camera lenses (optional).
≥Recommended product:
≥≥Lens cleaner kit (SZZP1038C)
≥≥(Available from Panasonic dealers.)
≥Be careful not to touch the lens with your
fingers.
Problem
The LCD is dark.
The picture is
disrupted during fast
forward and rewind.
SD moving picture
quality is poor (jittering
or blocky).
No picture on the LCD
Picture from another
unit not shown on the
LCD.
Picture doesn’t appear
on the television (or
the size of the picture
seems wrong).
LCD pixels turn black
or radiate different
colors.
Solution
Adjust the brightness. I
Some disruption is normal.
Select a picture mode other than “OFF” (no picture). I
Check connections. Q
Ensure the input setting is correct. Q
Ensure the power of the connected equipment is on.
Check connections. P
Check that the television is on.
Check that the input mode on the television is correct.
Check the settings in “Video—TV Aspect”. Q
The LCD is constructed with precision technology so 99.99 % of the
pixels are active, but of the remaining of 0.01 %, there are pixels that
may be black or emit light constantly. This phenomenon is not a
malfunction.
[Í] and [CHG] indicators
The [Í] indicator
flashes rapidly.
The [Í] indicator
flashes slowly.
The [CHG] indicator
flashes rapidly.
The [CHG] indicator
flashes slowly.
The unit has malfunctioned. Consult your dealer.
The unit is on and the LCD is closed or the display mode is set to
“OFF” (no picture). Turn the unit off when you have finished.
There is a problem with the battery pack. Turn the unit on and check
the message on the LCD. W
Battery pack charge is low. The unit will turn off automatically after a
few minutes. ;
Troubleshooting Guide
