569364
78
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
78
VQT4W64
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart
do not solve the problem, consult your dealer for instructions.
No power.
The unit does not turn on pressing [Í].
¾ Insert the AC mains lead securely into a known active
household mains socket. (> 6, 73)
¾ Linked timer recordings with external equipment is in recording
standby (“EXT-L” on the unit’s display blinks when [Í] is
pressed). Press [EXT LINK] to cancel the recording standby.
(> 25)
The unit switches to standby mode.
¾ One of the unit’s safety devices is activated. Press [Í/I] on the
main unit to turn the unit on.
The power is turned off automatically.
¾ If you connected this unit to a “HDAVI Control” compatible TV
with an HDMI cable, or connected this unit to a Q Link-
compatible TV with a fully wired 21-pin Scart cable, this unit will
be automatically set to standby mode when the TV is set to
standby mode. (> 39)
This unit turns off when the TV input is switched.
¾ This is a normal phenomenon when using VIERA Link (HDAVI
Control 4 or later). For details please read the operating
instructions for the TV.
The display is dim.
¾ Change “Unit’s Display” in the Setup menu. (> 68)
“0:00” is flashing on the unit’s display.
¾ Set the clock. (> 70)
The time recorded on the disc and the available
time shown do not add up.
The displayed time of this unit is different from
the actual recording time or MP3 recording time.
¾ Times shown may disagree with actual times.
¾ Available recording space on DVD-RW (DVD-Video format) or
+RW increases only when the last recorded title is deleted. It
does not increase if other titles are deleted.
¾ Even if you delete recorded content from the DVD-R, DVD-R
DL, +R or +R DL, there is no increase in disc space.
¾ More disc space than the actual recording time is used after
recording or editing the DVD-R, DVD-R DL, +R or +R DL 200
times or more.
¾ While searching, the elapsed time may not display correctly.
The clock is not correct.
¾ Under adverse reception conditions, etc., the automatic time
correction function may not work. In this case, “Automatic” is
automatically turned to “Off”. If re-setting the Auto Clock Setting
does not work, set the time manually. (> 70)
Compared to the actual recorded time, the
elapsed time displayed is less.
(Only when recording in NTSC)
¾ The displayed recording/play time is converted from the
number of frames at 29.97 frames (equal to 0.999 seconds) to
1 second. There will be a slight difference between the time
displayed and the actual elapsed time (e.g., actual 1 hour
elapsed time may display as approximately 59 minutes
56 seconds). This does not affect the recording.
“U88” is displayed and the disc cannot be
ejected.
¾ The unit is carrying out the recovery process. Do the following
to eject the disc.
1 Press [Í/I] on the main unit to switch the unit to standby.
If the unit doesn’t switch to standby, press and hold [Í/I] on
the main unit for about 3 seconds. The unit is forcibly
switched to standby.
2
While the unit is off, press and hold [
] and [CH
W
]
on the main
unit at the same time for about 5 seconds. Remove the disc.
Television reception worsens or becomes
impossible after connecting the unit.
¾ This can occur because the signals are being divided between
the unit and other equipment. It can be solved by using a signal
booster, available from audio-visual suppliers. If it is not solved
by using a signal booster, consult the dealer.
¾ Broadcast signals may not be output from this unit’s RF OUT
terminal. Select “On” in “RF OUT ( Aerial Signal )” in the Setup
menu. (> 71)
The digital channel information or control panel
does not appear.
Status messages do not appear.
¾ Select the length of time (3–10 sec.) in the “On-Screen
Messages” in the Setup menu. (> 68)
¾ The digital channel information will not appear during playback
or recording.
¾ The control panel is only displayed when connected to a TV
supporting “HDAVI Control 2” or later. (> 40)
¾ Analogue broadcasts do not support the digital channel
information.
Some functions of DVB-C/DVB-T do not work.
¾ The unit does not necessarily support all DVB-C/DVB-T
functions such as MHP (Multimedia Home Platform) etc.
New functions introduced by broadcasters cannot be
guaranteed to work.
The grey background does not appear.
¾ Select “On” in “Grey Background” in the Setup menu. (> 68)
Screen size is wrong.
¾ Check the settings for “TV Aspect” in the Setup menu. (> 69)
¾ If you connect an HDMI cable, set “Aspect for 4:3 Video” to
“16:9” in the Setup menu. (> 69)
The recorded title’s screen size is wrong.
¾ Set “Rec for High Speed Copy” to “On”, and set the “Aspect for
Recording” to “4:3”. (> 67)
¾ 16:9 aspect programmes are recorded in 4:3 aspect in the
following cases.
[-R] [-R]DL] [-RW‹V›] If you recorded or copied using “EP” or “FR
(recordings 5 hours or longer)” recording mode.
If you recorded or copied to a +R, +R DL or +RW.
If you recorded with the “Aspect for Recording” set to “4:3” in
the Setup menu.
When you want to record 16:9 programme in the same
aspect, set “Rec for High Speed Copy” to “On”, and set the
“Aspect for Recording” to “16:9”. (> 67)
¾
By setting “Aspect for Recording” to “Automatic”, there is a chance
that the recording will be made using the wrong aspect. Match the
aspect settings to the broadcast when recording. (
>
67)
It may be possible to adjust the display mode on the TV. Refer to
your television’s operating instructions.
The following do not indicate a problem with this unit:
Regular disc rotating sounds.
Poor reception due to atmospheric conditions.
Image disturbance during search.
Interruptions in reception due to periodic satellite broadcasting breaks.
Operations are slow to respond when “Power Save in Standby” is
activated.
Operations do not work due to a poor-quality disc. (Try again
using a Panasonic disc.)
The unit freezes due to one of its safety devices being activated.
(Press and hold [Í/I] on the main unit for 3 seconds.)
When the unit is turned on or off, there may be an unexpected
sound.
Power
Displays
TV screen and video
DMREX96C-VQTXXXX_eng.book 78 ページ 2013年3月5日 火曜日 午後5時51分
78

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic DMREX96CEG bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic DMREX96CEG in de taal/talen: Engels als bijlage per email.

De handleiding is 4,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Panasonic DMREX96CEG

Panasonic DMREX96CEG Gebruiksaanwijzing - Deutsch - 88 pagina's

Panasonic DMREX96CEG Gebruiksaanwijzing - Français - 88 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info