549881
1
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
Contents
Getting Started 2
Connections 16
Basic Operations 25
Disc Playback 27
iPod/iPhone Playback 38
USB Playback 40
Listening to the Radio 43
Clock and Timer 55
Miscellaneous 62
How to reset to factory default? 62
Troubleshooting 62
Specifications 67
E
n
CD Mini HiFi Components
Instruction Manual
PHA-1045DAB
R-1045 (Stereo Receiver)
C-1045 (CD Player)
R-1045DAB (Stereo Receiver)
C-1045 (CD Player)
PHA-1045
Thank you for purchasing an Onkyo R-1045 Stereo
Receiver and C-1045 CD Player.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new R-1045/C-1045.
Please retain this manual for future reference.
2
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloths.
7. Do not block any ventilation openings. Install in
accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus.
When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from
tip-over.
13. Unplug this apparatus during
lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been
dropped.
15. Damage Requiring Service
Unplug the apparatus from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen into
the apparatus,
C. If the apparatus has been exposed to rain or water,
D. If the apparatus does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often require
extensive work by a qualified technician to restore
the apparatus to its normal operation,
E. If the apparatus has been dropped or damaged in any
way, and
F. When the apparatus exhibits a distinct change in
performance this indicates a need for service.
16. Object and Liquid Entry
Never push objects of any kind into the apparatus through
openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock.
The apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as vases
shall be placed on the apparatus.
Don’t put candles or other burning objects on top of this
unit.
17. Batteries
Always consider the environmental issues and follow
local regulations when disposing of batteries.
18. If you install the apparatus in a built-in installation, such
as a bookcase or rack, ensure that there is adequate
ventilation.
Leave 20 cm (8") of free space at the top and sides and 10
cm (4") at the rear. The rear edge of the shelf or board
above the apparatus shall be set 10 cm (4") away from the
rear panel or wall, creating a flue-like gap for warm air to
escape.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS
OUVRIR
AVIS
PORTABLE CART WARNING
S3125A
Precautions
3
1. Recording Copyright—Unless it’s for personal use
only, recording copyrighted material is illegal without the
permission of the copyright holder.
2.
AC Fuse—The AC fuse inside the unit is not
userserviceable. If you cannot turn on the unit, contact
your Onkyo dealer.
3.
Care—Occasionally you should dust the unit all over
with a soft cloth. For stubborn stains, use a soft cloth
dampened with a weak solution of mild detergent and
water. Dry the unit immediately afterwards with a clean
cloth. Don’t use abrasive cloths, thinners, alcohol, or other
chemical solvents, because they may damage the finish or
remove the panel lettering.
4.
Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST
TIME, READ THE FOLLOWING SECTION
CAREFULLY.
AC outlet voltages vary from country to country. Make
sure that the voltage in your area meets the voltage
requirements printed on the unit’s rear panel (e.g., AC 230
V, 50 Hz or AC 120 V, 60 Hz).
The power cord plug is used to disconnect this unit from
the AC power source. Make sure that the plug is readily
operable (easily accessible) at all times.
Pressing the [ON/STANDBY] button to select Standby
mode does not fully shutdown the unit. If you do not
intend to use the unit for an extended period, remove the
power cord from the AC outlet.
5.
Never Touch this Unit with Wet Hands—Never
handle this unit or its power cord while your hands are wet
or damp. If water or any other liquid gets inside this unit,
have it checked by your Onkyo dealer.
6.
Preventing Hearing Loss
Caution
Excessive sound pressure from earphones and headphones
can cause hearing loss.
7.
Batteries and Heat Exposure
Warning
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat as sunshine, fire or the like.
8.
Handling Notes
If you need to transport this unit, use the original
packaging to pack it how it was when you originally
bought it.
Do not leave rubber or plastic items on this unit for a
long time, because they may leave marks on the
case.
This unit’s top and rear panels may get warm after
prolonged use. This is normal.
If you do not use this unit for a long time, it may not
work properly the next time you turn it on, so be sure
to use it occasionally.
When you’ve finished using this unit, remove all
discs and turn off the power.
9.
Installing this Unit
Install this unit in a well-ventilated location.
Ensure that there’s adequate ventilation all around
this unit, especially if it’s installed in an audio rack.
If the ventilation is inadequate, the unit may
overheat, leading to malfunction.
Do not expose this unit to direct sunlight or heat
sources, because its internal temperature may rise,
shortening the life of the optical pickup.
Avoid damp and dusty places, and places subject to
vibrations from loudspeakers.
Never put the unit on top of, or directly above a
loudspeaker.
Install this unit horizontally. Never use it on its side
or on a sloping surface, because it may cause a
malfunction.
If you install this unit near a TV, radio, or VCR, the
picture and sound quality may be affected. If this
occurs, move this unit away from the TV, radio, or
VCR.
10.
Moisture Condensation
Moisture condensation may damage this unit.
Read the following carefully:
Moisture may condense on the lens of the optical pickup,
one of the most important parts inside this unit.
Moisture condensation can occur in the following
situations:
- The unit is moved from a cold place to a warm
place.
- A heater is turned on, or cold air from an air
conditioner is hitting the unit.
- In the summer, when this unit is moved from an
air conditioned room to a hot and humid place.
- The unit is used in a humid place.
Do not use this unit when there’s the possibility of
moisture condensation occurring. Doing so may
damage your discs and certain parts inside this unit.
If condensation does occur, remove all discs and leave this
unit turned on for two to three hours.
By this time, the unit will have warmed up and any
condensation will have evaporated.
Precautions—Continued
4
This unit contains a semiconductor laser system and is
classified as a “CLASS 1 LASER PRODUCT”. So, to use
this model properly, read this Instruction Manual carefully. In
case of any trouble, please contact the store where you
purchased the unit.
To prevent being exposed to the laser beam, do not try to open
the enclosure.
CAUTION:
CLASS 1M VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. DO NOT VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS.
THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
The label on the right is applied on the
rear panel.
1. This unit is a CLASS 1 LASER PRODUCT and employs
a laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove
the cover. Refer servicing to qualified personnel.
For British models
Replacement and mounting of an AC plug on the power
supply cord of this unit should be performed only by qualified
service personnel.
IMPORTANT
The wires in the mains lead are coloured in accordance with
the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
IMPORTANT
The plug is fitted with an appropriate fuse. If the fuse needs to
be replaced, the replacement fuse must approved by ASTA or
BSI to BS1362 and have the same ampere rating as that
indicated on the plug.
Check for the ASTA mark or the BSI mark on the body of the
fuse.
If the power cord’s plug is not suitable for your socket outlets,
cut it off and fit a suitable plug. Fit a suitable fuse in the plug.
For European Models
Declaration of Conformity
We, ONKYO EUROPE
ELECTRONICS GmbH
LIEGNITZERSTRASSE 6,
82194 GROEBENZELL,
GERMANY
declare in own responsibility, that the ONKYO
product described in this instruction manual is in
compliance with the corresponding technical
standards such as EN60065, EN55013, EN55020
and EN61000-3-2, -3-3.
GROEBENZELL,
GERMANY
ONKYO EUROPE ELECTRONICS GmbH
5
Features
Amplifier
•VLSC
*1
(Vector Linear Shaping Circuitry)
Discrete Output Stage Circuitry
Optimum Gain Volume Circuitry
Direct Mode
Tone Control and Balance
3 Audio Inputs and 1 Output
PHONO(MM) Input
Subwoofer Pre Output
Coaxial and Optical Digital Input
Headphone Jack
iPod/iPhone
Compatible iPod
*2
models
Made for:
iPod touch (1st and 2nd generation)
iPod classic
iPod (5th generation)
iPod nano (1st, 2nd, 3rd, 4th and 5th generation)
iPhone 3GS
iPhone 3G
iPhone
USB Interface
* About FAT
Supports FAT16 and 32.
Supports up to 499 files per folder.
Supports up to 499 folders.
* MP3 decoder
Supports MPEG Audio 1, 2 and 2.5.
Supports Layer 1, 2 and 3.
Supports sample rates 8 k, 16 k, 32 k, 11.025 k,
22.05 k, 44.1 k, 12 k, 24 k and 48 kHz.
Supports bit rates 8 to 320 kbps and VBR (Variable
Bit Rate).
* WMA
*3
decoder
Supports WMA Ver. 9 standard.
Does not support DRM.
Supports sample rates 8 k, 16 k, 32 k, 11.025 k,
22.05 k, 44.1 k, 12 k, 24 k and 48 kHz.
Supports bit rates 5 to 384 kbps and VBR (Variable
Bit Rate).
* AAC decoder
Supports MPEG4 AAC-LC encoded by iTunes.
Does not support DRM.
Supports sample rates 8 k, 16 k, 32 k, 11.025 k,
22.05 k, 44.1 k, 12 k, 24 k and 48 kHz.
Supports bit rates 8 to 320 kbps and VBR (Variable
Bit Rate).
Tuner & Other
4-Mode Timer (Once, Every, Everyday or Day Set)
Sleep Timer
Battery-Free Memory Backup
Aluminium Front/Side panel and Volume knob
40 FM/AM Presets
40 FM/AM, 40 DAB/DAB+ Presets (R-1045DAB
only)
3-Mode Dimmer
CD Player
•VLSC
*1
(Vector Linear Shaping Circuitry)
Massive Power Transformer
Wolfson 192 kHz/24-Bit D/A Converter
Audiophile-Grade Capacitors
Coaxial Digital Output
Plays Audio CD, MP3/WMA CD, CD-R/RWs
Quick Navigation for MP3/WMA CD Playback
2 Repeat Modes (Track/Full)
25 Track Programming
Hi-Rigidity, Anti-Resonant Chassis
Aluminium Front Panel
RI-Compatible Remote Control
3-Mode Dimmer
*1 VLSC and the VLSC logo are registered trade-
marks of Onkyo Corporation.
*2 iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered in
the U.S. and other countries.
"Made for iPod" and "Made for iPhone" mean that
an electronic accessory has been designed to con-
nect specifically to iPod or iPhone, respecively,
and has been certified by the developer to meet
Apple performance standards.
Apple is not responsible for the operation of this
device or its compliance with safety and regulatory
standards.
*3 Windows Media is a registered trademark or trade-
mark of Microsoft Corporation in the United States
and/or in other countries.
6
Supplied Accessories
Make sure you have the following accessories:
Remote controller and two batteries
(R03/AAA)
The battery is not supplied with products for China.
Indoor FM antenna
AM loop antenna
DAB antenna (R-1045DAB)
Coaxial digital audio cable (1 m)
cable (80 cm)
To use , the CD Player must be connected with
a cable.
* In catalogs and on packaging, the letter at the end
of the product name indicates the color. Specifica-
tions and operations are the same regardless of
color.
7
Contents
Getting Started
Important Safety Instructions.................................. 2
Precautions ............................................................ 3
Features ................................................................. 5
Supplied Accessories ............................................. 6
Before Using the Stereo Receiver .......................... 8
Installing the Batteries...................................... 8
Using the Remote Controller............................ 8
Getting to Know the Stereo Receiver and CD Player
..... 9
Names of Each Part (Stereo Receiver)............ 9
Names of Each Part (CD Player) ................... 10
Remote Controller.......................................... 12
Disc Notes ............................................................ 14
Connections
Connecting the CD Player.................................... 16
C-1045 Connections ...................................... 16
RI Connections .............................................. 16
Connecting Antennas ........................................... 17
Connecting the Indoor FM Antenna ............... 17
Connecting the AM Loop Antenna ................. 17
Connecting an Outdoor FM Antenna ............. 18
Connecting an Outdoor AM Antenna ............. 18
Connecting the DAB Antenna (R-1045DAB only)
.. 18
Connecting Speakers ........................................... 19
Connecting Your Speakers............................. 19
Connecting Other Components ............................ 20
About Connections......................................... 20
Connecting a Subwoofer................................ 20
Connecting a Digital Playback Component ... 21
Connecting a Component with a Anaolog Audio
Output ............................................................ 21
Connecting the Power Cord ................................. 22
First Time Setup ................................................... 23
Setting the Clock with the AccuClock Function
..... 23
Setting APD (Auto Power Down) ................... 24
Changing the Selector Name......................... 24
Basic Operations
Basic Operations .................................................. 25
Turning On the Stereo Receiver..................... 25
Turning On CD Player.................................... 25
Adjusting the Volume ..................................... 25
Selecting the Input Source............................. 25
Using Headphones ........................................ 26
Muting the Sound........................................... 26
Adjusting the Bass, Treble and Balance ........ 26
Using the Direct Function............................... 26
Disc Playback
Disc Playback ....................................................... 27
Using the Remote Controller.......................... 28
Displaying CD Information ............................. 28
Selecting Files (MP3/WMA CDs) ................... 29
Selection a Folder during Playback (Search
Mode) ............................................................. 31
Displaying MP3/WMA Information ................. 32
Various Playback Modes ...................................... 33
Random Playback .......................................... 33
Memory Playback (For Audio CDs)................ 33
Memory Playback (For MP3/WMA CDs)........ 34
Repeat Playback ............................................ 35
Setting for MP3/WMA ........................................... 36
Setting for MP3/WMA Preferences ................ 36
iPod/iPhone Playback
iPod/iPhone Playback........................................... 38
Playing iPod/iPhone ....................................... 39
USB Playback
USB Playback....................................................... 40
Random Playback .......................................... 41
Select the type of Repeat Playback ............... 41
Displaying MP3/WMA/AAC Information ......... 42
Listening to the Radio
Listening to the Radio........................................... 43
Tuning into FM/AM Radio Stations................. 43
Displaying Radio Information ......................... 44
Receiving RDS............................................... 44
Listening to DAB Digital Radio (R-1045DAB only)
.. 45
Presetting FM/AM Stations Automatically (Auto
Preset)............................................................ 48
Presetting FM/AM/DAB Stations Manually (DAB
is only available in R-1045DAB)..................... 49
Selecting Preset Stations ............................... 50
Naming Presets.............................................. 51
Copying Presets............................................. 52
Erasing a Preset's Name................................ 53
Erasing Presets.............................................. 54
Clock and Timer
Setting the Clock .................................................. 55
Setting AccuClock Using a Specific Station ... 55
Setting the Clock Manually............................. 56
Using the Timers .................................................. 57
About the Timers ............................................ 57
Programming the Timers................................ 58
Turning Timers On and Off............................. 60
Checking Timer Settings ................................ 60
Using the Sleep Timer.................................... 61
Miscellaneous
Troubleshooting .................................................... 62
How to reset to factory default? ..................... 62
Specifications........................................................ 67
8
Before Using the Stereo Receiver
Installing the Batteries
Notes
If the remote controller doesn’t work reliably, try
replacing the batteries.
Don’t mix new and old batteries or different types of
batteries.
If you intend not to use the remote controller for a
long time, remove the batteries to prevent damage
from leakage or corrosion.
Expired batteries should be removed as soon as
possible to prevent damage from leakage or
corrosion.
Using the Remote Controller
When you operate the remote controller, point it at the
stereo receivers remote control sensor, as shown
below.
Notes
The remote controller may not work reliably if the
stereo receiver and the CD Player are subjected to
bright light, such as direct sunlight or inverter-type
fluorescent lights. Keep this in mind when installing.
If another remote controller of the same type is used
in the same room, or the stereo receiver is installed
close to equipment that uses infrared rays, the
remote controller may not work reliably.
Don’t put anything, such as a book, on the remote
controller because the buttons may be pressed
inadvertently, thereby draining the batteries.
The remote controller may not work reliably if the
stereo receiver and the CD Player are installed in a
rack behind colored glass doors. Keep this in mind
when installing.
The remote controller will not work if there’s an
obstacle between it and the stereo receiver and CD
Players remote control sensor.
The CD Player cannot be controlled using the remote
controller without connecting to the stereo receiver
via the cable.
1
To open the battery compartment,
press the small hollow and slide
open the cover.
2
Insert two batteries (R03/AAA) into
the compartment.
Carefully follow the polarity diagram
(positive (+) and negative (–) symbols)
inside the battery compartment.
The battery is not supplied with products
for China.
3
Slide the cover shut.
A
p
p
r
o
x
.
5
m
(
1
6
f
t
.
)
Remote control sensor
9
Getting to Know the Stereo Receiver and CD Player
Names of Each Part (Stereo Receiver)
Front Panel
STANDBY LED
DISPLAY
VOLUME
ON/STANDBY
iPod/USB
MODE/RETURN
MULTI JOG
INPUT
BASS/TREBLE/BALANCE
-/+
DIRECT
DIRECT LED
PHONES
Rear Panel
AM ANTENNA
DAB ANTENNA
R-1045DAB only
OPTICAL
GND
SPEAKERS L+/L-/R+/R-
AC INLET
FM ANTENNA
CD/COAXIAL
PHONO IN
LINE1 IN
LINE2 OUT
LINE2 IN
LINE3 IN
REMOTE CONTROL
SUBWOOFER PREOUT
Getting to Know the Stereo Receiver and CD Player—Continued
10
Names of Each Part (CD Player)
Front Panel
ON/STANDBY
Disc tray
Open/Close[ ] button
[ ]/[ ] buttons
STANDBY LED
Display
Pause [ ] button
Stop [ ] button
Play [ ] button
Rear Panel
ANALOG AUDIO OUTPUT
DIGITAL AUDIO OUTPUT COAXIAL
REMOTE CONTROL
AC INLET
Getting to Know the Stereo Receiver and CD Player—Continued
11
Display
R-1045/1045DAB
SLEEP indicator
Play [ ] and pause [ ] indicators
USB indicator
File format indicators
MP3
WMA
PCM
FOLDER indicator
DIRECT indicator
FILE indicator
MUTING indicator
Playback mode indicators
1FOLDER
MEMORY
RANDOM
REPEAT
REPEAT 1
TIMER indicators
TIMER
1, 2, 3, 4
Tuning indicators
AUTO
FM ST
DAB (R-1045DAB only)
RDS
Message area
TRACK indicator
TITLE, ARTIST, and ALBUM indicators
C-1045
Play and pause indicators
File format indicators
MP3
WMA
FOLDER indicator
FILE indicator
TRACK indicator
Playback mode indicators
MEMORY
RANDOM
REPEAT
REPEAT1
Message area
TITLE, ARTIST, and ALBUM indicators
DISC, TOTAL indicators
REMAIN indicator
Getting to Know the Stereo Receiver and CD Player—Continued
12
Remote Controller
Getting to Know the Stereo Receiver and CD Player—Continued
13
ON/STANDBY
Used to set the stereo receiver to On or Standby.
SLEEP
Used to set and release the setting and display the
status of sleep timer.
DIMMER
Used to change the display brightness.
DISPLAY
Used to indicate the CD or USB elapsed time and
the frequency of radio.
iPod/USB
Used to playback iPod/iPhone and USB.
TUNER
Selects AM, FM, or DAB (R-1045DAB only) as
the input source and play.
LINE1
Used to switch the source selector to LINE1.
LINE2
Used to switch the source selector to LINE2.
CD/COAX
Used to switch the source selector to CD/COAX.
OPTICAL
Used to switch the source selector to OPTICAL.
RANDOM
Used to start random playback when CD/COAX or
USB is selected.
REPEAT
Used to start repeat playback when CD/COAX or
USB is selected.
TIMER
Show the status of the timers.
MENU/NO
Use to display the menu.
FOLDER /
Used to switch the folder of CD (MP3, WMA) and
USB.
[]
Used to pause iPod/iPhone, CD and USB playback.
[]
Used to playback iPod/iPhone, and CD and USB.
[]/[]
Used to switch the iPod/iPhone, CD, USB tracks
and preset channel of radio.
[]
Used to stop iPod/iPhone, CD and USB.
[]/[]
Used to rewind or fast forward CD, USB play back
and adjust the radio tuning.
VOLUME
Adjust the volume level.
DIRECT
Used to invalidate the tone control.
Number buttons
CLEAR
OPEN/CLOSE (C-1045)
Used to open and close the disc tray.
CLOCK CALL
Calls up the clock to display the day and time.
PHONO
Used to switch the source selector to PHONO.
LINE3
Used to switch the source selector to LINE3.
MEMORY
Used to memory playback of CD.
MODE/YES
Used to switch the tuning mode of AM, FM and
DAB (R-1045DAB only).
MUTING
Mutes the output of the receiver.
FOLDER
14
Disc Notes
Precautions for Playback
Compact discs (CDs) with the following logo on the
label surface can be used.
Do not use discs designed for purposes other than
audio, such as CD-ROMs for PC use. Abnormal noise
could damage the speakers or amplifier.
* This CD player supports CD-R and CD-RW discs.
Note that some discs may not playback because of
the disc characteristics, scratches, contamination or
the recording state. A disc recorded with an audio
CD record will not playback unless it is finalized.
Never use discs which have a special shape (such as
hearts or octagons). These types of discs could jam and
damage the CD player. Playback of copy-controlled
audio CDs.
CD playback with copy-control function
Some audio CDs with copy-control function do not
comply with official CD standards. These are special
discs and cannot be played with this CD player.
Playback of MP3 and WMA Discs
MP3 and WMA files recorded on a CD-R/CD-RW can
be played with this CD player.
Use discs which have been recorded following the
ISO9660 Level 2 file system. (The supported
directory depth is eight levels, the same as ISO9660
Level 1)
Discs recorded with the hierarchical file system
(HFS) cannot be played.
Up to 99 folders (including the root folder), and up
to 499 files (including root) and files can be
recognized and played.
Always close the disc tray.
Notes
A disc recorded with a recorder or personal
computer may not play in some cases. (Cause: Disc’s
characteristics, damaged or dirty disc, dirt on
players lens, dew condensation, etc.)
A disc recorded on a personal computer may not
play because of the application settings or
environment. Record the disc with the proper format.
(Contact the application maker for details.)
A disc with insufficient storage capacity may not
play back properly.
Playback of MP3 Discs
Only MP3 files with the extension “.MP3” or
“. mp3” are supported.
This CD player supports files recorded in MPEG 1
Audio Layer 3 (32-320kbps), with the sampling
frequency of 32/44.1/48kHz.
Variable bitrates (VBR) between 32kbps and
320kbps are supported. The time information during
VBR playback may not display correctly.
Playback of WMA Discs
WMA stands for “Windows Media® Audio”, an
audio compression technology developed by
Microsoft Corporation USA.
Only WMA files with the extension “.WMA” or
“.wma” are supported.
Encode the WMA file with an application approved
by Microsoft Corporation USA. The file may not
playback correct if encoded with an unapproved
application.
Variable bitrates (VBR) between 64kbps and
160kbps (32/44.1/48kHz) are supported.
Copyright-protected WMA files cannot be played
back.
WMA Pro, Lossless and Voice are not supported.
* Windows Media is a registered trademark or
trademark of Microsoft Corporation in the United
States and/or in other countries.
Disc Notes—Continued
15
Handling Discs
Hold discs by the edge, or by the center hold and edge.
Avoid touching the playback surface (surface with
nothing printed on it).
Do not attach paper or stickers, or write on the
playback or label surface of the disc. Take care not to
scratch or damage the disc.
Precautions for Rental Discs
Do not use discs with residue from cellophane tape,
rental discs with labels which are peeling off, or discs
with decorative labels. This type of disc could get stuck
in the CD player, or could damage the CD player.
Precautions for Inkjet Printable Discs
Do not leave a CD-R/CR-RW having a label printed
with an inkjet printer in the CD player for a long time.
The disc could get stuck in the CD player, or could
damage the CD player.
Remove the disc from the CD player when not being
played, and store it in a case. A freshly printed disc will
stick easily, and should not be played immediately.
Caring for Discs
If the disc is dirty, the CD player will have a hard time
reading signals, and the audio quality may drop. If the
disc is dirty, gently wipe off fingerprints and dust with
a soft cloth. Lightly wipe from the center outwards.
To remove stubborn dust or dirt, wipe
the disc with a soft cloth dampened
with water, and then dry it with a dry
cloth. Do not use cleaning spray for
analog records or antistatic agents, etc.
Never use volatile chemicals such as
benzine or paint thinner as they can impregnate the disc
surface.
Label surface
(printed surface)
Playback
surface
16
Connecting the CD Player
C-1045 Connections
Don’t connect the power cord until you’ve
completed and double-checked all connections.
Use the coaxial cable included in the package.
The analog audio cable can be used instead.
Push plugs in all the way to make good connections
(loose connections can cause noise or malfunctions).
To prevent interference, keep audio cables away
from power cords and speaker cables.
Notes
The analog audio cable is not supplied.
!
Caution
When installing the unit, put the stereo receiver on top of the CD Player. Do not put anything on the stereo receiver.
Connections
With (Remote Interactive) you can control the R-1045 together with C-1045. With R-1045 you can use one remote
controller to C-1045.
Notes
Use only cables for connections.
It is not necessary to use the cable when using the coaxial cable.
Left (white)
Right (red)
Analog audio
cable
Left (white)
Right (red)
Analog
audio cable
R
L
Coaxial cable
cable
: Signal flow
R-1045
C-1045
17
Connecting Antennas
This section explains how to connect the supplied
indoor FM antenna and AM loop antenna, and how to
connect commercially available outdoor FM and AM
antennas.
The receiver won’t pick up any radio signals without
an antenna connected, so you must connect the antenna
to use the tuner.
Connecting the Indoor FM Antenna
The supplied indoor FM antenna is for indoor use only.
If you cannot achieve good reception with the supplied
indoor FM antenna, try a commercially available
outdoor FM antenna instead (see page 18).
Connecting the AM Loop Antenna
The supplied indoor AM loop antenna is for indoor use
only.
If you cannot achieve good reception with the supplied
indoor AM loop antenna, try using it with a
commercially available outdoor AM antenna (see page
18).
1
Attach the FM antenna, as shown.
Once the receiver is ready for use, you’ll
need to tune into an FM radio station and
adjust the position of the FM antenna to
achieve the best possible reception.
2
Use thumbtacks or something
similar to fix the FM antenna into
position.
Be careful that you don’t injure yourself
when using thumbtacks.
DAB antenna jack (R-1045DAB only)
AM antenna jack
FM antenna jack
Insert the plug fully
into the jack.
Thumbtacks, etc.
1
Assemble the AM loop antenna,
inserting the tabs into the base, as
shown.
2
Connect both wires of the AM loop
antenna to the AM push terminals,
as shown.
(The antenna’s wires are not polarity
sensitive, so they can be connected either
way around). Make sure that the wires are
attached securely and that the push
terminals are gripping the bare wires, not
the insulation.
Once the receiver is ready for use, you’ll
need to tune into an AM radio station and
adjust the position of the AM antenna to
achieve the best possible reception.
Keep the antenna as far away as possible
from the receiver, TV, speaker cables, and
power cords.
Push Insert wire Release
Connecting Antennas—Continued
18
Connecting an Outdoor FM Antenna
If you cannot achieve good reception with the supplied
indoor FM antenna, try a commercially available
outdoor FM antenna instead.
Notes
Outdoor FM antennas work best outside, but usable
results can sometimes be obtained when installed in
anattic or loft.
For best results, install the outdoor FM antenna well
away from tall buildings, preferably with a clear line
of sight to your local FM transmitter.
Outdoor antenna should be located away from
possible noise sources, such as neon signs, busy
roads, etc.
For safety reasons, outdoor antenna should be
situated well away from power lines and other high-
voltage equipment.
Outdoor antenna must be grounded in accordance
with local regulations to prevent electrical shock
hazards.
Using a TV/FM Antenna Splitter
It’s best not to use the same antenna for both FM and
TV reception, as this can cause interference problems.
If circumstances demand it, use a TV/FM antenna
splitter, as shown.
Connecting an Outdoor AM Antenna
If good reception cannot be achieved using the
supplied AM loop antenna, an outdoor AM antenna
can be used in addition to the loop antenna, as shown.
Outdoor AM antennas work best when installed
horizontally outside, but good results can sometimes be
obtained indoors by mounting horizontally above a
window. Note that the AM loop antenna should be left
connected.
Outdoor antenna must be grounded in accordance with
local regulations to prevent electrical shock hazards.
Connecting the DAB Antenna
(R-1045DAB only)
Notes
If you cannot get a good reception, adjust the position
of the antenna. (See Page 43)
To stereo receiver To TV (or VCR)
TV/FM antenna splitter
Outdoor antenna
AM loop antenna
Insulated antenna cable
1
Screw the supplied DAB antenna’s
plug onto the DAB ANTENNA jack.
Once the stereo receiver is ready for use,
you’ll need to tune into a DAB station and
adjust the position of the DAB antenna to
achieve the best possible reception.
2
Use thumbtacks or something
similar to fix the DAB antenna into
position.
19
Connecting Speakers
Connecting Your Speakers
Connect the right speaker to the stereo receiver’s right (R) SPEAKERS terminals. Connect the left speaker to the left
(L) SPEAKERS terminals.
Connect the positive (+) terminal on each speaker to the corresponding positive (+) terminal on the stereo receiver.
Connect the negative (–) terminal on each speaker to the corresponding negative (–) terminal on the stereo receiver.
Use the red wires to connect the positive (+) terminals.
Connect only speakers with an impedance of
between 4 and 16 ohms. Connecting a speaker with a
lower impedance may damage the speaker.
Be careful not to short the positive and negative
wires. Doing so may damage the stereo receiver.
Do not connect both speaker cables to the same L or
R terminals (Fig. 1). Do not connect more than two
speaker terminals to each speaker (Fig. 2).
-Terminal posts-
Strip about 15 mm (5/8") of insulation from the ends of the
speaker cables, and twist the bare wires tightly. Unscrew
the terminal. Fully insert the bare wire, making sure that it’s
touching the threaded shaft in the center. Screw the
terminal tight.
Fig 1 Fig. 2
20
Connecting Other Components
About Connections
Cables and Jacks
No connecting cables are included with the stereo receiver.
Connecting a Subwoofer
The stereo receiver has a SUBWOOFER PRE OUT jack for connecting a powered subwoofer (i.e., a subwoofer with a
built-in amplifier).
Cable Jack Description
Analog audio cable
This cable carries analog audio.
Optical digital audio
cable
This cable carries digital audio.
COAXIAL digital audio
cable
This cable carries digital audio.
R
L
OPTICAL
COAXIAL
Stereo receiver
: Signal fl o w
P o w ered s u b w o o f er
LINE INPUT
LINE INPUT
Connecting Other Components—Continued
21
Connecting a Digital Playback Component
Notes
The unit supports 16/24 bit, 32/44.1/48/96 kHz PCM signal digital input.
Inputting an incompatible signal may result in noise.
Do not input a DTS-CD digital audio signal.
!
Caution
Plug optical digital cables straight in and out. Plugging them in and out at an angle can damage the inlet of the OPTICAL
terminal.
Connecting a Component with an Analog Audio Output
Picture shows how to connect a component with an analog audio output. Connect the stereo receiver’s LINE1-3, PHONO
to an analog audio output on the component.
Notes
The cartridge format can be connected to PHONO is MM type only.
Prepare a STEP-UP TRANSFORMER if you wish to use MC type.
!
Caution
If the turntable has a ground wire, connect it to the unit's GND screw. Note, however, that for some turntables,
connecting the ground wire will increase the noise. If this happens, do not connect the ground wire.
Optical IN
Coaxial IN
(not supplied)
(PLAY) (REC)
OUTPUT INPUT
L
R
Component
with an analog audio output
: Signal flow
R-1045’s
rear panel
Analog audio cable
Red
White
White
Red Red
Red
White White
White
Red
White
Red
L
R
Ground wire
OUTPUT
22
Connecting the Power Cord
Plug the power cord into a suitable wall outlet.
The STANDBY LED lights up.
Notes
Before connecting the power cord, connect all of your speakers and other components.
Turning on the stereo receiver may cause a momentary power surge that might interfere with other electrical
equipment on the same circuit. If this is a problem, plug the stereo receiver into a different branch circuit.
To set the clock with the AccuClock function, the stereo receiver must be able to receive RDS radio stations, which
means an FM antenna must be connected (see pages 17, 23).
To wall outlet
Power cord
To wall outlet
(The figure varies
from country to country.)
23
First Time Setup
Setting the Clock with the AccuClock Function
RDS is only for the area where RDS broadcasts are available.
To use the AccuClock function, the stereo receiver must be able to receive RDS radio stations, which means an FM
antenna must be connected. Be sure to connect an FM antenna before attempting to use this function (see pages 17 to 18).
The very first time you turn on the stereo receiver, the AccuClock function automatically sets the stereo receivers clock
based on the CT (Clock Time) information present in an RDS radio broadcast. While the clock is being set, “Wait…”
flashes on the display, as shown. Note that it may take up to 5 minutes to set the clock.
When the clock has been set, the message “Clock Adjusted” scrolls across the display, then the day and time are
displayed for a while, as shown.
The AccuClock function automatically updates the clock daily at 02:00, 03:00, and 14:00.
If for some reason the clock cannot be set automatically, see “Setting AccuClock to Using a Specific Station” on page 55
and “Setting the Clock Manually” on page 56.
Notes
To cancel this function while “Wait…” is displayed, use the [INPUT] knob, press [MODE/RETURN] button, or MULTI
JOG controller.
Turning Off the AccuClock Function
If you don’t want AccuClock to automatically update the clock each day, you can turn it off as follows.
Notes
The AccuClock function cannot be turned off until the
clock has been set.
TIMER
MODE/YES
1
Press the [TIMER] button repeatedly
until “Clock” appears on the display.
2
Press [ ].
“AccuClock” appears on the display.
3
Press the [MODE/YES] button.
First Time Setup—Continued
24
Setting APD (Auto Power Down)
This section explains how to set APD (Auto Power Down) function to set the R-1045/R1045DAB and C-1045.
R-1045/R-1045DAB
It is basically activated when no sound or control is
output from/to the receiver for 30 minutes
continuously.
It is also activated if no device is connected to the USB
connector when [USB] is selected or if the digital
signal is unlocked when [CD/COAX] or [OPT] is
selected for 30 minutes continuously.
C-1045
For CD playback, it is activated when the playback is
stopped for 30 minutes; however, it is not activated
when the playback is paused continuously.
Changing the Selector Name
If the R-1045 and the C-1045 are connected via LINE, you need to change the selector name by the following procedure
to control the C-1045 using the remote controller.
Notes
At this time, the selector name for COAXIAL is
“COAX”. The C-1045 cannot be controlled using the
remote controller when “COAX” is set to the input
source.
Notes
Change the selector name from CD/LINE* to LINE*
when you want to control the R-1045 and the C-1045
using the remote controller via COAXIAL.
1
Press and hold the [MENU/NO]
button, then “APD On”, “APD Off”,
or “CD o CD/COAX” will appear on
the display.
2
Use the [ ] or [ ] button to
display “APD On” or “APD Off”, then
press the [ ] button.
3
“Complete” appears on the display.
1
Select “CD” by pressing the [CD/
COAX] button on the remote controller
or adjusting the [INPUT] knob on the
front control of the receiver.
2
Press the [MENU] button.
3
Use the [ ] or [ ] button to
display “APD”, then press the [ ]
button.
4
Use the [ ] or [ ] button to
switch “APD ON” or “APD OFF”,
then press the [ ] button.
5
“COMPLETE” appears on the
display.
1
Press and hold the [MENU/NO]
button, then “APD On”, “APD Off”,
or “CD o CD/COAX” will appear on
the display.
2
Use the [ ] or [ ] button to display
“CD o CD/COAX”, then press the
[ ] button.
3
Press the [ ] or [ ] button to
display “CD o CD/COAX”.
4
Press the [ ] or [ ] button to
select the Jack which connected to
C-1045, then press the [ ] button to
decide.
“Complete” appears on the display.
Change the names as below depending on
the connected LINE inputs.
LINE1 ĺ CD/LINE1
LINE2 ĺ CD/LINE2
LINE3 ĺ CD/LINE3
(CD→COAXIAL)
(CD→LINE2)
(CD→LINE1)
(CD→LINE3)
25
Basic Operations
Turning On the Stereo Receiver
To turn on the stereo receiver, press the [ON/
STANDBY] button on the stereo receiver or the remote
controller. The STANDBY LED goes off.
Press the [ON/STANDBY] button again to set the stereo
receiver to Standby. The STANDBY LED lights up.
Notes
The stereo receiver will also be turned on when you
press the [ ] button on the front panel of the CD
player.
Turning On CD Player
To turn on the CD Player press the [ON/STANDBY].
Press the [ON/STANDBY] button again to set the CD
Player to Standby.
Notes
After turning on the stereo receiver using the remote
controller, press the [CD/COAX] or [ ] button. The
CD Player will be turned on.
If the selector names are changed, press the [LINE 1],
[LINE 2], [LINE 3] or [ ] button.
Adjusting the Volume
Turn the [VOLUME] control clockwise to increase the
volume or counterclockwise to decrease it.
You can also use remote controller’s VOLUME [ ]/
[ ] buttons.
Selecting the Input Source
You can select CD, DAB (R-1045DAB only), AM,
FM, or a connected component (USB, LINE 1-3,
PHONO, CD/COAX, OPT) as the input source.
Each time the [TUNER] button on the remote
controller is pressed, the radio station will change in
the order of the following: [DAB] (R-1045DAB only)
ĺ [AM] ĺ [FM]
STANDBY LED
ON/STANDBY
PHONES
INPUT
VOLUME
S
tereo
receiver
Remote
controller
CD player
Stereo receiver
Remote
controller
Stereo
receiver
Remote
controller
Basic Operations—Continued
26
Using Headphones
Turn down the volume, then connect your stereo
headphones to the [PHONES] minijack.
You can adjust the volume and mute the sound, by
using the [VOLUME] control.
The speakers output no sound while the headphones
are connected.
Notes
When you select iPod as the input source, the
headphones output no sound. If use headphones,
connect it directly to iPod/iPhone.
Muting the Sound
To mute the output of the stereo receiver,
press the remote controller’s [MUTING]
button. The MUTING indicator flash on
the display.
To unmute the stereo receiver, press the
[MUTING] button again.
Notes
While the stereo receiver is muted:
Turning the [VOLUME] control on the stereo receiver
or pressing the VOLUME [ ]/[ ] buttons on the
remote controller will unmute the stereo receiver.
If you turn the stereo receiver off, the next time you
turn it on, the stereo receiver will be unmuted.
Adjusting the Bass, Treble and
Balance
You can adjust the bass, treble and balance using the
selector on the front panel.
The Default setting is “0”. You can adjust the bass and
treble from -6 to +6, and the balance from L6 to R6.
Using the Direct Function
To turn the Direct function on or off, press
the [DIRECT] button on the stereo
receiver. When the Direct function is off,
the tone controls can be used to adjust the
sound. When the Direct function is on, the
tone controls are bypassed, so you can
enjoy a pure sound, and the DIRECT LED
lights up.
PHONES jack
MUTING
VOLUME
BASS/TREBLE/BALANCE
DIRECT
DIRECT
indicator
27
Disc Playback
Audio CD Display
MP3/WMA CD Display
To Select Tracks
Press the [ ] button to select the next track or the
[ ] button to select the previous track.
If you press the [ ] button during playback or
while playback is paused, the beginning of the
current file is selected.
If you select a file while playback is stopped, press
the Play [ ] button to start playback.
Notes
For MP3/WMA CDs, you can select MP3/WMA files
in other folders.
To Fast-Forward or Fast-Reverse
During playback or while playback is paused, hold
down the [ ] button to fast-forward or the [ ]
button to fast-reverse.
For MP3/WMA CDs, fast-reverse only works within
the MP3/WMA file that’s currently playing.
To Pause Playback
Press the Pause [ ] button. The Pause indicator
appears.
To resume playback, press the Play [ ] or Pause [ ]
button again.
To Stop Playback
Press the Stop [ ] button.
To Eject the CD
Press the Open/Close [ ] button to open the disc tray.
Disc tray
/
1
Press the Open/Close [ ] button to
open the disc tray.
2
Place the CD on the tray with the
label-side facing up.
When you want to listening to the 8 cm CD,
place it in the center of the tray.
3
To start playback, press the Play
[ ] button.
The disc tray closes and playback starts.
“DISC TOTAL” lights up while the
disc information is being displayed.
Total
playing time
Total number
of tracks
Disc name or file format
Total number
of files
Total number
of folders
Disc Playback—Continued
28
Using the Remote Controller
Displaying CD Information
Press the CD Player or the remote controller’s [DISPLAY] button (repeatedly) to show the following CD information.
While playback is stopped
[ ]/[ ] buttons
Selects the last or next track
[ ]/[ ] buttons
During playback, fast forwards
or fast reverses the track.
DISPLAY button
Play [ ] button
Press to display
more CD information
Pause [ ] button
VOLUME buttons [ ]/[ ]
Adjust the volume level
Stop [ ] button
To select:
Use the number buttons as shown
in the examples below to select
tracks.
Press:
Track # 8
Used to enter numbers over 9.
With MP3/WMA CDs, you can select files in
the current folder with these buttons.
Track #10
Track #34
Total playing time
(DISC TOTAL
REMAIN)
Total number
of tracks
Disc Playback—Continued
29
During playback or while playback is
paused
Notes
See page 32 for details on displaying MP3/WMA
information.
Selecting Files (MP3/WMA CDs)
For MP3/WMA CDs, files (MP3/WMA files) may be
organized in a hierarchically, with folders containing
files and subfolders, as shown below.
In this manual, MP3/WMA files are referred to as
files.
Likewise, folders (directories) are referred to as
folders.
If you don’t select a specific MP3/WMA file or folder
for playback, all of the MP3/WMA files on the CD will
be played in numerical order starting with file #1 in
parentheses.
For the CD Player, there are two modes for selecting
files (MP3/WMA files): Navigation mode and All
Folder mode.
In Navigation mode, you can select files (MP3/WMA
files) by navigating through the folder hierarchy,
moving in and out of folders and subfolders.
In All Folder mode, all folders appear at the same
level, making it easy to select folders regardless of the
hierarchy.
While playback is stopped, press the [ ] button to
enter the Navigation mode or the [ ] button to enter
the All Folder mode.
The combination between the way to press the button
and the corresponding playback mode can be
exchanged. When operating on CD Player, the file
selection in the Navigation and All Folder modes can
be disabled. (See “STOP KEY” of “Setting MP3/
WMA Preferences” on page 37.)
Elapsed file time:
The length of time that the current file
has been playing (default display).
Remaining file time:
The amount of time remaining for the
current file (REMAIN indicator
appears).
Remaining disc time:
The amount of time remaining for the
entire disc (TOTAL and REMAIN
indicators appear).
Disc Playback—Continued
30
Selecting Files in Navigation Mode
In Navigation mode, you can select files by navigating
through the folder hierarchy. This mode can only be
used while playback is stopped.
Selecting Files in All Folder Mode
In All Folder mode, you don’t have to navigate the
folder hierarchy because all folders that contain files
appear at the same level.
1
While playback is stopped, press the
[ ] button.
The CD Player enters Navigation mode and
“ROOT” appears on the display.
2
Press the [ ] button.
The first folder name in ROOT appears on
the display.
If the disc contains no folders, the first file
name appears.
3
Use the [ ]/[ ] buttons to select
other folders and files at the same
level.
Folders that don’t contain files or
subfolders can’t be selected.
Repeat steps 2 and 3 to select the files
and subfolders in that folder.
To move up a level, press the [ / ]
button.
To cancel the procedure at any point,
press the Stop [ ] button.
4
To start playback, press the Play [ ]
button.
Playback will start with the specified file or
folder and continue until all of the files on
the disc have been played.
/
/
1
While playback is stopped, press the
[ ] button.
The CD Player enters All Folder mode, and
“1-” appears on the display.
2
Use the [ ]/[ ] buttons to select
the other folders.
You can select any folder that contains
files.
/
Disc Playback—Continued
31
Selecting a Folder during Playback
(Search Mode)
This section explains how to select MP3/WMA folders
CD (MP3/WMA) : 1, 2, 5
USB : 1, 2, 3, 4, 5
Notes
[FOLDER] button cannot be used during “Random
Playback” and “Memory Playback”.
3
Press the [ ] button.
The first file name inside the folder
appears.
Use the [ ]/[ ] buttons to select the
files within the folder.
To select another folder, press the [ ]
button again, and then use the [ ]/
[ ] buttons to select it.
To cancel the procedure at any point,
press the Stop [ ] button.
To Select Folders and Files by
Number
1 Use the number buttons as shown in the
examples below to enter folder numbers.
2 Use the number buttons to enter the file
number.
Playback starts.If a folder contains more
than 99 files, single- and double-digit file
numbers must be preceded by zeros. For
example, to specify file #8, press [8]. To
specify file #34, press [>10], [0], [3], and
[4]. To specify file #134, press [>10], [1],
[3], and [4].
4
To start playback, press Play [ ]
button.
Playback will start with the specified file or
folder and continue until all of the file on
the disc have been played.
To select: Press:
Tra ck #8
Track #34
Used to enter numbers over 9.
Track #10
1
Press the [FOLDER] button.
The display blinks.
2
To select the previous folder, press
the Previous [ ] button.
To select the next folder, press the
Next [ ] button.
3
Press the [FOLDER] button to
display the file name.
4
Use the Previous [ ] and Next
[ ] buttons to select a file.
5
Press the [ ] button.
Disc Playback—Continued
32
Displaying MP3/WMA Information
You can display various information about the MP3/
WMA file currently playing, including ID3 tags such
as title name, artist name, and album name.
Notes
To display the disc name, press the [DISPLAY]
button while playback is stopped.
If a file or folder name contains any characters that
cannot be displayed, an underscore will appears in
place of those characters. Alternatively, you can set
the CD Player so that names containing such
characters are displayed as “FILE n” or “FOLDER
n,” “n” being the file or folder number (see “BAD
NAME” on page 36).
During playback, press the
[DISPLAY] button repeatedly to
display the following MP3/WMA
information.
Elapsed file time:
The length of time that the current file
has been playing (default display).
File name:
Name of the current file.
Folder name:
Name of the current folder.
Title name:
Title of the current file (if ID3 tag
present). When there is no ID3 tag,
“TITLE-NO DATA” appears.
Artist name:
Name of the artist (if ID3 tag present).
Album name:
Name of the album (if ID3 tag present).
Sampling rate and bit rate:
Sampling rate and bit rate of the
current file.
33
Various Playback Modes
You can select the following playback modes:
Random playback
Memory playback
Repeat playback
Random Playback
In random playback, all of the files on the disc are
played in random order.
To Cancel Random Playback
Stop the playback, then press the [RANDOM]
button to change the playback mode. The RANDOM
indicator disappears, and random playback is
cancelled.
Random playback is cancelled when the disc is
ejected.
Memory Playback (For Audio CDs)
In memory playback, you can create a playlist of up to
25 files.
Memory playback can be set only when the playback is
stopped.
1
While playback is stopped, press the
[RANDOM] button, then the
RANDOM indicator appears.
2
To start random playback, press the
Play [ ] button.
RAMDOM
1
Press the [MEMORY] button, then
the MEMORY indicator appears.
2
Use the Previous and Next [ ]/
[ ] buttons to select the first file
you want to add to the playlist, and
then press [ ] button.
Repeat this step to add additional files to
the playlist.
You can alternatively use the number
buttons on the remote controller to select
files instead of the Previous and Next
[ ]/[ ] and the [ ] buttons.
/
DISPLAY
MEMORY
Track to be added
to the playlist
Total time
of playlist
Various Playback Modes—Continued
34
To Select Other Files During Memory Playback
Use the Previous and Next [ ]/[ ] buttons.
To Check What’s on the Playlist
While playback is stopped, use the Fast Reverse and
Fast Forward [ ]/[ ] buttons to scroll through the
playlist.
To Remove Files from the Playlist
While memory playback is stopped, press the
[CLEAR] button. Each press removes the last file
from the playlist.
The playlist is deleted on changing the playback
mode (press the [MEMORY] button after stopping
the playback).
To Cancel Memory Playback
Stop the playback, then press the [MEMORY]
button to change the playback mode. The MEMORY
indicator disappears, and memory playback is
cancelled.
Memory playback is cancelled when the disc is
ejected.
Memory Playback (For MP3/WMA
CDs)
Memory playback can be set only when the playback is
stopped.
To Change the Display
While the memory setting operations, press the
[DISPLAY] button to change the display information
as follows:
File name ĺ Folder name ĺ Memory number
Memory Playback in Navigation Mode
Notes
If the total playing time is more than 99
minutes and 59 seconds, “– –:– –”
appears.
You can add up to 25 files to the playlist.
If you try to add more, the message
“MEM FULL” appears.
To Change the Display
While the memory setting operations, press
the [DISPLAY] button to change the
display information as follows:
Total playback time of the memorized
filesĺ Memory number ĺ Current
playback time of the selected file
3
To start memory playback, press the
[ ] button.
The memory playback starts.
You can alternatively start playback with
the Play [ ] button.
Track currently playing
1
Press the [MEMORY] button, then
the MEMORY indicator appears.
2
Press the [ ] button.
The CD Player enters Navigation mode and
“ROOT” appears on the display.
3
Press the [ ] button.
The first folder name in ROOT appears on
the display.
4
Use the [ ]/[ ] buttons to select
other folders and files at the same
level.
Folders that don’t contain files or
subfolders can’t be selected.Repeat steps 3
and 4 to select the files and subfolders in
that folder.
5
Press the [ ] button.
The first file is memorized in the playlist.
6
Use the [ ]/[ ]/[ ] buttons to
continue selecting the memory file.
To move up a level, press the [ / ] button.
To continue selecting the memory file,
repeat steps 4 and 5.
To memorize other files of the same folder
in the playlist, use the [ ]/[ ] buttons
to select files, then press the [ ] button.
MEMORY
/
/
Various Playback Modes—Continued
35
Memory Playback in All Folder Mode
Repeat Playback
In repeat playback, you can play an entire CD
repeatedly, play one track repeatedly, or combine it
with memory playback to play the playlist repeatedly,
or random playback to play all of the tracks on the disc
in random order repeatedly.
Repeat-1 playback can’t be combined with memory
playback, random playback.
To Cancel Repeat Playback
Press the [REPEAT] button repeatedly until the
“REPEAT OFF” appears. (The REPEAT indicator
disappears.)
Repeat playback is cancelled when the disc is
ejected.
7
Press the Play [ ] button.
Memory playback starts.
1
Press the [MEMORY] button, then
the MEMORY indicator appears.
2
Press the [ ] button.
The CD Player enters All Folder mode and
“1-” appears on the display.
3
Use the [ ]/[ ] buttons to select
the folder.
4
Press the [ ] button.
5
Use the [ ]/[ ] buttons to select
the file.
6
Press the [ ] button.
The first file is memorized in the playlist.
7
Press the [ ] button, then repeat
steps 3 to 6.
To memorize other files of the same folder
in the playlist, repeat steps 5 to 6.
8
Press the Play [ ] button.
Memory playback starts.
Press the [REPEAT] button, then the
“REPEAT” or “REPEAT1” indicator
appears.
REPEAT
36
Setting for MP3/WMA
Setting MP3/WMA Preferences
With the MP3/WMA preferences, you can change the
way MP3/WMA file information is displayed and the
way MP3/WMA CDs are played.
The MP3/WMA preferences can be set only when
playback is stopped.
Preferences
Below, the name of each preference is followed by its
options in parentheses, with the default option in
capital letters.
DISC NAME (Display/Not)
This preference determines whether or not the disc
name is displayed when an MP3/WMA disc is read.
FILE NAME (Scroll/Not)
This preference determines whether or not the file
name scrolls across the display when an MP3/WMA
file is selected.
In Navigation mode (see page 30), the file name scrolls
across the display regardless of this setting.
FOLDER NAME (Scroll/Not)
This preference determines whether or not the folder
name scrolls across the display when an MP3/WMA
folder is selected.
In Navigation mode (see page 30), the folder name
scrolls across the display regardless of this setting.
BAD NAME (Replace/Not)
This preference determines whether or not file and
folder names that contain undisplayable characters are
replaced with “FILE n.” or “FOLDER n.,” “n” being
the file or folder number. When set to NOT,
displayable characters are displayed and underscores
are used in place of any undisplayable characters.
For ID3 tags, underscores are used in place of
undisplayable characters regardless of this preference.
Notes
File and folder names are scrolled in Navigation mode
(page 30) regardless of the file NAME and GRP
NAME preferences.
ID3 VER.1 (Read/Not Read)
This preference determines whether or not version 1.0/
1.1 tags are read and displayed. When set to NOT
READ, version 1.0/1.1 tags will not be displayed.
ID3 VER.2 (Read/Not Read)
This preference determines whether or not version 2.2/
2.3/2.4 tags are read and displayed. When set to NOT
READ, version 2.2/2.3/2.4 ID3 tags will not be
displayed.
CD EXTRA (Audio/MP3)
This preference applies to CD Extra discs and
determines whether music in the audio session or MP3/
WMA files in the data session are played.
JOLIET (Use SVD/ISO9660)
This preference applies to MP3/WMA discs in Joliet
format and determines whether the CD Player reads the
SVD data or treats the disc as an ISO 9660 disc.
Normally, this preference doesn’t need to be changed.
SVD (Supplementary Volume Descriptor) supports
long file and folder names and characters other than
letters and numbers.
HIDE NUMBER (Disable/Enable)
This preference determines whether or not the numbers
at the beginning of file and folder names are hidden.
When you create an MP3/WMA CD on a personal
computer, you cannot normally determine the playback
order of the files. However, if you number the MP3/
WMA files in order, starting with 01, 02, 03, and so on,
they will play in that order. If you don’t want these
numbers to appear on the display, choose ENABLE.
1
Press the [MENU/NO] button.
2
Use the [ ]/[ ] buttons to select
the preference you want to change.
The preferences are explained in the next
column.
3
Press the [ ] button.
4
Use the [ ]/[ ] buttons to select
the preference’s options.
To cancel the procedure at any point, press
the [MENU/NO] button.
5
Press the [ ] button.
When the preference has been set,
“COMPLETE” appears on the display.
/
MENU/NO
Setting for MP3/WMA—Continued
37
The following table shows a few examples of
numbered file and folder names and how they will
appear with the DISABLE and ENABLE options.
STOP KEY (All Folder/Disable/Navigation)
This preference determines how the Stop [ ] button on
the CD Player works.
When the ALL Folder option is selected, pressing the
stop[ ] button once selects All Folder mode.
When the Navigation option is selected, pressing the
stop[ ] button once selects Navigation mode.
When the Disable option is selected, CD Player does
not enter Navigation or All Folder mode by pressing
the Stop [ ] button.
APD (APD ON/APD OFF)
Please refer to the "Setting APD" (Page 24) for the
following procedures.
File/folder name DISABLE ENABLE
01 POPS 01 POPS POPS
10-ROCK 10-ROCK ROCK
16_JAZZ 16_JAZZ JAZZ
21TH CENTURY 21TH CENTURY 21TH CENTURY
05-07-20 ALBUM 05-07-20 ALBUM ALBUM
38
iPod / iPhone Playback
Before using your iPod/iPhone with the stereo receiver, be sure to update your iPod/iPhone with the latest software,
available from the Apple Web site.
If you leave your iPod/iPhone paused when using it on its own, eventually it will go into hibernation. If you connect it to the
USB port in this state, you’ll need to wait a few moments before your iPod/iPhone is ready for use.
Always remove your iPod/iPhone before moving stereo receiver.
Depending on your iPod/iPhone, or the type of content being played, some functions may not work as expected.
[ ]/[ ] buttons
Selects the last or next track
Selects the item on the
VOLUME buttons [ ]/[ ]
Adjust the volume level
[ ]/[ ] buttons
During playback, fast forwards
or fast reverses the track.
DISPLAY button
Press to display more track information.
Play [ ] button
REPEAT button
Press to set the iPod/iPhone
repeat function.
RANDOM button
Press to set the iPod/iPhone
in the iPod/iPhone.
iPod/iPhone menu.
shuffle function.
Press to select a function
on the iPod/iPhone.
iPod / iPhone Playback—Continued
39
Playing iPod/iPhone
Notes
During playback on the iPod nano or iPod (5th
generation), “ONKYO” is displayed on the iPod
display and the quick wheel cannot work.
When the playback stops, the “ONKYO” disappears
and the quick wheel can work.
The volume level is adjusted by using the VOLUME
[ ]/[ ] buttons on the remote controller.
Adjusting the volume on your iPod/iPhone has no
effect.
In case you inadvertently move your iPod/iPhone
volume control, make sure the volume level is not
set too high before you reconnect your headphones.
During playback, press the [DISPLAY] button
repeatedly to display the following Track
information.
1
Connect your iPod/iPhone to the
USB connector on the front panel of
the stereo receiver using the USB
cable.
Once you have connected the iPod /
iPhone to the stereo receiver, no sound
heard through headphones if you connect
it to the [PHONES] jack on the receiver.
Connect the headphones directly to the
iPod/iPhone.
2
Select “USB” using the [USB] button
on the remote controller or the
[INPUT] knob on the stereo receiver.
When no iPod/iPhone is connected, “No
USB” will be displayed.
3
To start playback, press the [ ]
button.
Playback will start with the top file in the
folder organization (see page 29, File #1).
To stop playback:
Press the [ ] button.
To pause playback:
Press the [ ] button. The Pause indicator
appears. To resume playback, press the
[ ] button again.
iPod
Artist name
Title name
Album name
40
USB Playback
This section explains how to play music files on a USB Flash device.
Connect a USB Flash device as shown below.
Display during Stop
Notes
When all music files of a USB Flash device have been
played, playback will repeat from the top music file in
the folder organization. The type of repeat playback
can be selected (see page 41).
Selecting Music files
Press the [ ] button repeatedly to select previous
file.
While playback is stopped, pressing the [ ] button
will select the previous file.
Press the [ ] button repeatedly to select next file.
Selecting Music files in other folders
1 Press the [DISPLAY] button to display the
current folder name.
2 To select the previous folder, press the [ ]
button.
To select the next folder, press the [ ] button.
3 Press the [DISPLAY] button to display the file
name.
4 Use the [ ] or [ ] buttons to select a file.
Notes
See page 31 for “Selecting a Folder during
Playback”.
Do not connect the receiver’s USB port to a USB
port on your computer. Music on your computer
cannot be played through the receiver in this way.
Operation with all USB Flash devices including the
ability to power them is not guaranteed.
Do not connect your USB Flash device via a USB
hub. The USB Flash device must be connected
directly to the receivers USB port.
If the USB Flash device contains a lot of data, the
receiver make take a while to read it.
iPod/USB
/
iPod/USB
DISPLAY
1
Insert USB Flash device.
2
Select “USB” using the [USB] button
on the remote controller or the
[INPUT] knob on the stereo receiver.
When no USB Flash device is connected,
“USB No Media” will appears.
When there is no MP3, WMA or AAC
file in the USB Flash device, “No File”
will be displayed.
3
To start playback, press the Play [ ]
button.
Playback will start with the top file in the
folder organization (see page 29, File #1).
To stop playback:
Press the Stop [ ] button.
To pause playback:
Press the Pause [ ] button. The Pause
indicator appears. To resume playback,
press the Play [ ] button again.
Total number of folders
Total number of files
USB indicator
USB Playback—Continued
41
Random Playback
With random playback, all of the music files on the
USB Flash device are played in random order.
Cancelling Random Playback
To cancel random playback, press the [RANDOM]
button. The RANDOM indicator disappears.
Random playback is cancelled when the USB Flash
device is removed or the stereo receiver is set to
Standby.
Select the type of Repeat Playback
When playing back USB Flash device music files, all
files on the USB Flash device will be played according
to repeat playback (the REPEAT indicator is already
appears). The type of Repeat playback can be selected.
1
Press the [RANDOM] button.
The RANDOM indicator appears.
2
To start random playback, press the
[ ] button.
RAMDOM
Press the [REPEAT] button
repeatedly to select the type of
repeat playback.
Repeat playback (default):
REPEAT indicator appears
Repeat-1 playback:
Repeats a single selected file.
REPEAT 1 indicator appears
1-Folder Repeat Playback:
Repeats files in Folder.
1FOLDER indicator appears.
REPEAT
USB Playback—Continued
42
Displaying MP3/WMA/AAC
Information
You can display various information about the MP3/
WMA/AAC files currently playing, including ID3 tags
such as title, artist name, and album name.
During playback, press the
[DISPLAY] button repeatedly to
display the following music file
information.
DISPLAY
Elapsed time:
The length of time that the current
MP3, WMA or AAC file has been
playing (default display). If the elapsed
time is more than 99 minutes and 59
seconds, “– –:– –” is displayed.
File name:
Name of the current file.
Folder name:
Name of the current folder.
Title name:
Title of the current file (if ID3 tag
present).
Artist name:
Name of the artist (if ID3 tag present).
Album name:
Name of the album (if ID3 tag present).
While an MP3 file is playing, “MP3”
will appear.
While a WMA file is playing, “WMA”
will appear.
While an AAC file is playing, “AAC”
will appear.
The file format will also be displayed
when selecting a file.
43
Listening to the Radio
Tuning into FM/AM Radio Stations
When tuned into a station, the Tuned indicator
appears. When tuned into a stereo FM station, the FM
ST indicator appears as well.
Tuning into weak stereo FM/AM stations
If the signal from a stereo FM station is weak, it may
be impossible to get good reception. In this case,
switch to Manual Tuning mode and listen to the station
in mono.
Adjusting the Antennas
Adjusting and installing the antenna
Choose a location for the antenna while listening to a station.
TUNER
MODE/YES
/
AUTO
FM ST
Band Frequency
1
Press the [TUNER] button repeatedly
to select “FM” or “AM”.
2
Press the [MODE/YES] button
repeatedly to select “Auto” or
“Manual”.
Auto Tuning Mode
The AUTO indicator appears and stereo
radio reception is possible.
Manual Tuning Mode
The AUTO indicator is not displayed and
radio reception will be in mono.
3
Use the Fast Reverse and Fast
Forward [ ]/[ ] buttons or [MULTI
JOG] control to tune into a station.
In Auto tuning mode, once a station is
found, tuning stops automatically.
The stereo receiver changes FM frequency
in 0.05 MHz steps, AM frequency in 9kHz.
In Manual Tuning mode, the frequency
stops changing when you release the
button.
Press the button repeatedly to change the
frequency one step at a time.
FM /
DAB (R-1045DAB only)
AM
FM
Change the direction of the antenna to
achieve the best reception.
!
Caution
Be careful not to prick your finger!
DAB (R-1045DAB only)
Affix the antenna with a
thumbtack. (Do not push the
thumbtack through the antenna.)
Listening to the Radio—Continued
44
Displaying Radio Information
Press the remote controller’s [DISPLAY] button repeatedly to display more radio information.
Receiving RDS
RDS is only available in areas where RDS
broadcasts are available.
What is RDS?
RDS stands for Radio Data System and is a method of
transmitting data in FM radio signals. It was developed
within the European Broadcasting Union (EBU) and
many European FM radio stations use it these days.
The stereo receiver supports and displays the Program
Service Name (PS) and Radio Text (RT) types of RDS
data.
The RDS indicator appears on the display when the
stereo receiver is tuned to an FM station that supports
RDS.
Notes
If the signal from an RDS station is weak, RDS data
may be displayed intermittently or not at all.
The message “Waiting…” may appear while the RT
data is being received.
* If the selected preset has no name, it will be
skipped and the next Program Service Name will
appear.
DISPLAY
FM/AM/DAB
Frequency
Preset name
*2
*1
*1 R-1045DAB only
*2 If the selected preset has no name, “No Name”
appears briefly and then the frequency is displayed.
See “Naming Presets” on page 51.
Frequency and preset number
Preset name
*
Program Service Name
Radio Text (if available)
Press the [DISPLAY] button repeatedly to
display the following RDS information.
Listening to the Radio—Continued
45
Listening to DAB Digital Radio (R-1045DAB only)
Selecting DAB for the Very First Time
The very first time you select DAB, the Auto Tuning
function automatically scans the DAB Band III for the
multiplexes (i.e., stations) available in your area.
Once the scanning process is complete, the first station
that was detected is selected.
Using the Scan Function Manually
If a new DAB station is introduced, or you move to a
new area, you can run the Auto Tuning function
manually.
1 Press the [MENU/NO] button.
2 Use the Previous and Next [ ]/[ ] buttons to
select “Scan?” and then press [ ].
3 Use the Previous and Next [ ]/[ ] buttons to
select World or U.K., (see “Scan?” on page 47), and
then press [ ] to start the Auto Tuning function.
To cancel Auto Tuning, press the [ ], [MENU/NO]
or [MODE/YES] button.
If no station is detected after scanning, “No Station”
appears on the display.
You can also use the front panel controls.
1 Push the [MULTI JOG] control.
2 Turn the [MULTI JOG] control to select “Auto
Tuning?” and then push it.
3 Turn the [MULTI JOG] control to select World or
U.K., and then push it to start the Auto Tuning
function.
To cancel Auto Tuning, push the [MULTI JOG]
control.
Press the [TUNER] button repeatedly
to select “DAB”.
When tuned into a DAB station, the Tuned
indicator appears and the DAB indicator as
well.
On the front panel, press the [INPUT] knob
repeatedly to select “DAB”.
/
MENU/NO
MODE/YES
Station name
Tuned indicator
DAB indicator
Listening to the Radio—Continued
46
Selecting DAB Stations
You can also use the multi control to select DAB
stations.
Once a DAB station has been preset, these front
panel controls will select presets, in Preset mode. To
use them to select DAB stations, select DAB as the
input source, and then press the Stop [ ] button for 3
seconds until “Station Mode” appears on the display.
Displaying DAB Radio Information
Press the remote controller’s [DISPLAY] button
repeatedly to display more information about the
selected DAB station.
1. DLS (Dynamic Label Segment)
When tuned to a station that’s broadcasting DLS text
data, the text will scroll across the display.
2. Program Type
Displays the type of program.
3. Bit Rate and Audio Mode
Displays the station’s bit rate and audio mode
(stereo, mono, or joint stereo).
4. Signal Quality
Displays the signal quality.
0–59: Poor reception
60–79: Good reception
80–100: Excellent reception
5. Multiplex Name
Displays the name of the current multiplex.
6. Multiplex Number and Frequency
Displays the number and frequency of the current
multiplex.
Use the Fast Reverse and Fast
Forward [ ]/[ ] buttons to select
the DAB stations.
If a secondary service is available, a right
angle bracket (>) is displayed.
Press the Fast Forward [ ] button to listen
to the secondary service.
While the secondary service is selected, a
left angle bracket (<) is displayed.
Press the Fast Reverse [ ] button to return
to the primary service.
When you select a station that you’ve
selected a lot in the past, the letter F (short
for Favorite) is displayed.
If you select a station that cannot be
received properly, a question mark (?) is
displayed.
DISPLAY
/
“F”
“?”
(Scroll)
Listening to the Radio—Continued
47
DAB Setup
Use the following functions and settings to set up DAB
digital radio.
Preset Write?
Select this to preset the current DAB station. See
“Presetting FM/DAB Stations Manually” on page 49
for more information.
Tuning Mode?
With this setting, you can sort the available stations
alphabetically, by multiplex, or active stations.
Use the Previous and Next [ ]/[ ] buttons to
select the following options, and then press [ ].
Alphabet (default):
Sort stations alphabetically.
Multiplex: Sort stations by multiplex.
Active St: Sort by active stations. Receivable stations
appear at the top of the list. stations that
cannot be received properly appear at the
bottom of the list.
Scan?
This setting determines which DAB bands are scanned
by the Auto Tuning function (see page 45).
UK: Band III (11B–12D).
World (default):
Band III (5A–13F) and L-Band (LA–LW).
DRC Setting?
With the DRC (Dynamic Range Control) setting, you
can reduce the dynamic range of DAB digital radio so
that you can still hear quiet parts even when listening at
low volume levels—ideal for listening to the radio late
at night when you don’t want to disturb anyone.
Use the Previous and Next [ ]/[ ] buttons to
select the following options, and then press [ ].
0 (default): DRC off.
1: Large reduction in dynamic range.
1/2: Small reduction in dynamic range.
1
Press the [MODE/YES] button.
2
Use the Previous and Next [ ]/
[ ] buttons to select the item you
want to set, and then press [ ].
The items are explained below.
/
MODE/YES
Listening to the Radio—Continued
48
Presetting FM/AM Stations Automatically (Auto Preset)
With the Auto Preset function, you can automatically preset all of the FM or AM radio stations available in your area in
one go. Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time
you want to change stations.
Notes
Depending on your location, a preset may be stored
with no station and you will hear only noise when you
select it. In this case, delete the preset (see page 54).
You can also use the front panel controls.
1 Press the [INPUT] knob repeatedly until “FM” or
“AM” appears.
2 Push the [MULTI JOG] control, and then turn it to
select “AutoPreset?”
3 Push the [MULTI JOG] control. The confirmation
message “AutoPreset??” appears.
4 To start the Auto Preset function, push the [MULTI
JOG] control.
After Storing Presets You Can:
Select them (see page 50)
Name them for easy identification (see page 51)
Copy them (see page 52)
Erase them (see page 54)
TUNER
/
MENU/NO
!
Caution
Any existing presets will be deleted when the Auto
Preset function is run.
1
Press the [TUNER] buttons
repeatedly until “FM” or “AM”
appears.
Make sure the FM antenna is positioned to
achieve the best possible reception.
2
Press the [MENU/NO] button, and
then use the Previous and Next
[ ]/[ ] buttons to select
“AutoPreset?”.
3
Press [ ].
The confirmation message “AutoPreset??”
appears.
To cancel the Auto Preset function at this
point, press the [MENU/NO] button.
4
To start the Auto Preset function,
press [ ].
Up to 20 stations can be preset and presets
are stored in frequency order.
Listening to the Radio—Continued
49
Presetting FM/AM/DAB Stations Manually (DAB is only available in R-1045DAB)
With the Preset Write function, you can manually preset individual FM, AM and DAB radio stations. Presets make it
easy to select your favorite stations and eliminate the need to tune the radio manually each time you want to change
stations. FM stations can also be preset automatically (see page 48).
Notes
If the current FM station supports RDS and PS
(Program Service Name), the station’s name will be
displayed instead of the frequency. (See page 44 for
more on RDS.)
/
MENU/NO
MODE/YES
About Presets
You can store up to 40 FM, AM and 40 DAB stations as
presets and this can be any combination.
Although FM and DAB presets share the same numbers,
they’re selected independently. For example, preset #1 will
store DAB station when the DAB band is selected, and an
FM station when the FM band is selected.
Stations can be stored to presets in any order. For example,
you could store preset #5 first, #1 second, and so on.
1
Tune into the station that you want to
store as a preset.
2
Press the [MENU/NO] button, and
then use the Previous and Next
[ ]/[ ] buttons to select “Preset
Write?”.
3
Press [ ].
The preset number flashes.
To cancel the Preset Write function at this
point, press the [MENU/NO] button.
4
Use the Previous and Next [ ]/
[ ] buttons to select a preset
number.
5
To store the station, press [ ].
If no station has yet been stored to the
selected preset, “Complete” appears and the
station is stored.
If a station has already been stored in the
selected preset number, the message
“Overwrite?” appears.
To overwrite the previously stored station,
press the [MODE/YES] button.
To not overwrite the previously stored
station, press the [MENU/NO] button.
If the message “Memory Full” appears, all
40 presets have been stored and you’ll need
to erase some presets before you can store
any more stations (see page 54).
6
Repeat steps 1 to 5 to preset more radio
stations.
Listening to the Radio—Continued
50
After Storing Presets You Can:
Select them (see page 50)
Name them for easy identification (see page 51)
Copy them (see page 52)
Erase them (see page 54)
Selecting Preset Stations
You must store some presets before you can select
them (see pages 48 to 49).
TUNER
/
Number
buttons
1
Use the [TUNER] or [INPUT] knob to
select “FM”, “AM” or “DAB” (R-
1045DAB only).
The preset you selected the last time you
listened to the radio will still be selected.
2
Use the Previous and Next [ ]/
[ ] buttons to select a preset.
Press the Previous [ ] button to select
the previous preset. Press the Next [ ]
button to select the next preset.
You can also use the number
buttons as shown in the examples
below to select presets.
To select: Press:
Preset #8
Preset #22
Used to enter numbers over 9.
Preset #10
Listening to the Radio—Continued
51
Naming Presets
You can name presets for easy identification. The
preset name may contain of up to eight characters.
1
Select the preset number you want
to name (see page 50).
2
Press the [MENU/NO] button, and
then use the Previous and Next
[ ]/[ ] buttons to select “Name
In?”.
3
Press [ ].
MENU/NO
MODE/YES
Number
buttons
DISPLAY
CLEAR
/
4
Press the [DISPLAY] button
repeatedly to select one of the
following character groups:
A” for uppercase letters.
“a” for lowercase letters.
1” for numbers and symbols.
5
Selecting letters:
Press the number buttons repeatedly to
select the available letters. For example,
press the [2] button repeatedly to select:
A, B, or C.
Selecting numbers and symbols:
Use the number buttons to select
numbers.
Press the [>10] button repeatedly to
select: (space) . / * - , ! ? & ’ ( )
Press the [0] button repeatedly to select:
0 or (space)
Notes
Not all of the symbols can be entered by
using the number buttons. Use the Previous
and Next [ ] or [ ] buttons to select
from the full range of symbols.
When you’ve selected the character
you want, press [ ], and then
choose the next character.
Editing characters:
To change or delete a character you’ve
already entered, use the Fast Reverse and
Fast Forward [ ]/[ ] buttons to select
it, and then select another character, or
press the [CLEAR] button to delete it.
Inserting a new character:
To insert a new character, use the Fast
Reverse and Fast Forward [ ]/[ ]
buttons to select the character
immediately after the insertion point.
That character flashes.
Use the Previous and Next [ ] or
[ ] buttons to select “ ”, press [ ],
and then select the new character.
To cancel the Name In function, press and
hold the [MENU/NO] button for 2 seconds.
Character group
Listening to the Radio—Continued
52
You can also use the front panel controls.
1 Select the preset you want to name (see page 50).
2 Push the [MULTI JOG] control, and then turn it to
select “Name In?”
3 Push the multi control.
4 Turn the multi control to select a character, and then
push it. Shift the cursor using the [INPUT] knob.
5 Repeat step 4 to enter up to 8 characters.
Use the remote controllers [DISPLAY] button to
select the character groups.
Available Characters
A B C D E F G H I J K L M N O P Q R S T U V W X
Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9
_ @ ' < > # $ % & * = ; : + - / ( ) ?
! ’ ” , . (space) (insert)
Copying Presets
With the Preset Copy function, you can organize your
presets in the order you want. When you copy a preset,
its name is also copied.
6
When you’ve finished entering the
name, press the [MODE/YES] button.
The preset is named and “Complete”
appears on the display.
1
Select the preset you want to copy
(see page 50).
2
Press the [MENU/NO] button, and
then use the Previous and Next
[ ]/[ ] buttons to select
“PresetCopy?”.
3
Press [ ].
The number of the preset to be copied
flashes.
4
Use the Previous and Next [ ]/
[ ] buttons to select the
destination preset.
The number of the destination preset
flashes.
/
MENU/NO
Listening to the Radio—Continued
53
You can also use the front panel controls.
1 Select the preset you want to copy (see page 50).
2 Push the [MULTI JOG] control, and then turn it to
select “PresetCopy?”.
3 Push the [MULTI JOG] control.
4 Turn the [MULTI JOG] control to select the
destination preset.
5 To copy the preset, push the [MULTI JOG] control.
Tip:
If you favorite station is stored in preset #5 and you
want to make it preset #1, copy preset #5 to preset #1.
To keep the station that’s already stored in preset #1,
you may want to copy it to an unused preset first.
Erasing a Preset’s Name
You can also use the front panel controls.
1 Select the preset whose name you want to erase (see
page 50).
2 Push the [MULTI JOG] control, and then turn it to
select “NameErase?”.
3 To erase the preset’s name, push the [MULTI JOG]
control.
5
To copy the preset, press [ ].
If no station has yet been stored in the
destination preset, the station is copied and
“Complete” appears.
If a station has already been stored in the
destination preset, the message
“Overwrite?” appears.
To overwrite the previously stored station,
press [ ].
To not overwrite the previously stored
station, press the [MENU/NO] button.
1
Select the preset whose name you
want to erase (see page 50).
2
Press the [MENU/NO] button, and
then use the Previous and Next
[ ]/[ ] buttons to select
“NameErase?”.
3
To erase the preset’s name, press
the [MODE/YES] or [ ] button.
The preset’s name is erased and
“Complete” appears on the display.
/
MENU/NO
MODE/YES
Listening to the Radio—Continued
54
Erasing Presets
You can also use the front panel controls.
1 Select the preset you want to erase (see page 50).
2 Push the [MULTI JOG] control, and then turn the
multi control to select “PresetErase?”.
3 Push the [MULTI JOG] control. The confirmation
message “Erase OK?” appears.
4 To erase the preset, push the [MULTI JOG] control.
1
Select the preset you want to erase
(see page 50).
2
Press the [MENU/NO] button, and
then use the Previous and Next
[ ]/[ ] buttons to select
“PresetErase?”.
3
Press [ ] or [MODE/YES].
A message requesting confirmation
appears.
To cancel the Preset Erase function at this
point, press the [MENU/NO] button.
4
To erase the preset, press [ ].
The preset is erased and “Complete”
appears on the display.
/
MENU/NO
MODE/YES
55
Setting the Clock
Setting AccuClock Using a Specific Station
RDS is only available in areas where RDS broadcasts are available.
The AccuClock function normally uses the FM station with the strongest signal to set the clock. However, if the clock
cannot be set properly using that station, you can specify the FM station the which AccuClock function uses. This must
be an FM station that supports RDS CT (Clock Time) information.
1
Press the [TIMER] button.
“Clock” appears on the display.
If the clock has already been set, a timer
option appears instead, in which case you’ll
need to press the [TIMER] button
repeatedly until “Clock” appears.
2
Press [ ].
“AccuClock” appears on the display.
If “ManualAdjust” appears, use the
Previous and Next [ ]/[ ] buttons to
select “AccuClock” or “*AccuClock*”.
3
Press [ ].
The frequency flashes on the display.
4
Use the Fast Reverse and Fast
Forward [ ]/[ ] buttons to tune
into the FM station.
Tip:
The RDS indicator appears when tuned into
a station that supports RDS.
The RDS indicator will flash while the
stereo receiver searches for a station and
light up continuously when a station is
found.
5
When you’ve selected the station,
press [ ].
While the clock is being set, “Wait” flashes
on the display. It may take a few minutes to
set the clock. When the clock has been set,
the message “Clock Adjusted” scrolls
across the display, then the day and time are
displayed for a while.
If the clock is not set correctly, specify
another FM station and try again or set
the clock manually (see page 56).
The AccuClock function automatically
updates the clock every day. If you don’t
want it to, you can turn off the
AccuClock function (see page 23).
Setting the Clock—Continued
56
Setting the Clock Manually
The time can be displayed in either 24- or 12-hour
format.
Displaying the Day and Time
To display the day and time, press the remote
controllers [CLOCK CALL] button.
If the stereo receiver is on Standby, the time is
displayed for 8 seconds.
Using the 24- or 12-hour Format
To change the time format between 24 hour and 12
hour, while the time is shown on the display, press the
[DISPLAY] button.
1
Press the [TIMER] button repeatedly
until “Clock” appears.
2
Press [ ].
3
Use the Previous and Next [ ]/[ ]
buttons to select “ManualAdjust”.
Can also be controlled using the
[MULTI JOG] control.
4
Press [ ].
5
Use the Previous and Next [ ]/[ ] or
[ ]/[ ] buttons to select the day
of the week.
You can select: SUN, MON, TUE, WED,
THU, FRI, or SAT.
TIMER
/
ON/STANDBY
DISPLAY
CLOCK CALL
6
Press [ ].
To cancel the Manual Adjust function at
this point, press the [MENU/NO] button.
7
Use the Previous and Next [ ]/
[ ] (1step) or [ ]/[ ] (scan)
buttons to set the time.
You can also use the remote controllers
number buttons to enter the time.
For the 12-hour format, use the remote
controllers [>10] button to select AM or
PM.
8
Press [ ].
The clock is set and the second dot starts
flashing.
57
Using the Timers
The stereo receiver has five timers: four programmable
timers for automated playback or recording, and a
sleep timer for turning the stereo receiver off after a
specified period.
The timers can be used with C-1045 that are connected
to the stereo receiver via (see page 16 for hookup
details).
About the Timers
The various settings for the four programmable timers
are explained here. For details on the sleep timer, see
page 61.
Repeat Timers
Each timer can be programmed to work just once
(Once), every week (Every), every day (Every Day), or
on a range of days (Days Set).
Once
The timer will work just once.
Every
The timer will work every week on the specified day
and time.
Everyday
The timer will work every day.
Days Set
The timer will work on the specified range of days.
With this setting, you could set up a morning alarm for
Monday to Friday.
Timer Examples
The following examples highlight some of the ways in
which you can use the timers.
To wake up to your favorite radio station (preset #1)
every morning, set as follows:
PlayÆFM 1ÆEveryÆEvery DayÆOn
7:00ÆOff 7:30
If you want a radio alarm only on weekdays, select
“Days Set” instead of “Every Day” and specify
“MON–FRI.”
Timer Priority
If two or more timers are set to the same On time, the
lowest numbered timer has priority. For example:
Timer 1: 07:00 – 13:00 (This timer has priority.)
Timer 2: 07:00 12:30
If two or more timers overlap, the timer with the
earliest start time has priority. For example:
Timer 1: 9:00 – 10:00
Timer 2: 8:00 – 10:00 (This timer has priority.)
If the On and Off times of two timers are the same, the
timer with the earliest start time has priority and the
other timer will fail. For example:
Timer 1: 0:00 – 1:00 (This timer has priority.)
Timer 2: 1:00 2:00
Timer Indicators
When a timer has been set, the TIMER
indicator and the number of the timer
appear on the display.
Notes
The timers work only if the stereo receiver is on
Standby. If it’s on when a timer is supposed to start
playback, nothing will happen.
While timed playback is in progress, the timer’s Off
time cannot be changed.
Using the Timers—Continued
58
Programming the Timers
Notes
You must set the clock before you can program the
timers.
Before programming a timer to turn on the radio,
you must preset the station you want to use. (See
pages 48 to 49.)
If you don’t operate any buttons for 60 seconds
while programming a timer, the procedure will be
cancelled and the previous display will reappear.
1
Press the [TIMER] button repeatedly
to select Timer 1, 2, 3, or 4, and then
press [ ].
If “Clock” appears, you need to set the
clock (see pages 23, 55 to 56).
2
Use the Previous and Next [ ]/
[ ] buttons to select the source,
and then press [ ].
TIMER
/
ON/STANDBY
3
If you selected “FM”, “AM” or “DAB”
(R-1045DAB only), use the Previous
and Next [ ]/[ ] buttons to select
the radio preset, and then press [ ].
You can select the following source;
R-1045DAB
R-1045
4
Use the Previous and Next [ ]/
[ ] buttons to select “Once” or
“Every”, and then press [ ].
Select “Once” for on-off operation.
Select “Every” to perform the same
operation every week.
5
If you selected “Once”, use the
Previous and Next [ ]/[ ]
buttons to select the day, and then
press [ ].
You can select: SUN, MON, TUE, WED,
THU, FRI, or SAT.
Go to step 8.
6
If you selected “Every”, use the
Previous and Next [ ]/[ ]
buttons to select the day,
“Everyday” or “Days Set”, and then
press [ ].
You can select the following:
DAB
USB
LINE 2
AM
PHONO
CD / COAX
OPTICAL
LINE 1
LINE 3
FM
USB
LINE 2
AM
PHONO
CD / COAX
OPTICAL
LINE 1
LINE 3
FM
SUN
TUE
MON
Days Set Everyday
WED THU
SAT
FRI
Using the Timers—Continued
59
To return to step 1 and start timer programming all over
again, press the [MENU/NO] button at any point in this
procedure.
7
If you selected “Days Set”, use the
Previous and Next [ ]/[ ]
buttons to select the first day, and
then press [ ].
Use the Previous and Next [ ]/
[ ] buttons again to select the last
day, and then press [ ].
You can select only consecutive days.
8
Use the Previous and Next [ ]/
[ ] buttons to specify the On time,
and then press [ ].
You can also use the remote controllers
number buttons to enter the time. For
example, to enter 7:29, press [7], [2], and
[9].
Once the On time is set, the Off time is
automatically set to one hour later.
9
Use the Previous and Next [ ]/
[ ] buttons to specify the Off time,
and then press [ ].
10
If you selected “Play” in step 2, Use
the Previous and Next [ ]/[ ]
buttons to specify the stereo
receiver’s volume level, and then
press [ ].
The default setting is “10”.
If you want to use your normal volume
level setting for the timer, press the
Previous button repeatedly until
“TimerVol.Lst” appears on the display.
In this case, the timer will use the volume
level that was set before the stereo receiver
was set to Standby.
11
TIMER indicator 1, 2, 3, or 4 will stop
flashing and light up.
Press the [ON/STANDBY] button to
set the stereo receiver to Standby.
Notes
Be sure to set the stereo receiver to
Standby, otherwise the timed operation
will not work.
While a timed operation is in progress,
you can cancel it by pressing the
[TIMER] or [SLEEP] button.
Memory, random, and 1-Folder (USB
only) playback cannot be used with the
timers.
TIMER indicator
Number of programmed timer
Using the Timers—Continued
60
Turning Timers On and Off
Once a timer has been programmed, you can turn it on
or off as necessary. For example, while you’re on
holiday, you may want to turn off the timer you use as
an earlymorning alarm.
Checking Timer Settings
1
Press the [TIMER] button repeatedly
to select Timer 1, 2, 3, or 4.
When a timer has been programmed, its
number appears on the display.
2
Use the Previous and Next [ ]/
[ ] buttons to select “Timer On” or
“Timer Off”.
After a few moments, the previous display
reappears.
TIMER
/
MENU/NO
or
1
Press the [TIMER] button repeatedly
to select Timer 1, 2, 3, or 4, and then
press [ ].
2
Press [ ] repeatedly to see all of
the timer’s settings.
Notes
You can change the settings by using the
Previous and Next [ ]/[ ] buttons.
If you change the settings of a timer that
is off, that timer will be turned on.
If you don’t change any settings, the
previous display reappears.
To return to the previous display at any
point in this procedure, press the [MENU/
NO] button.
Using the Timers—Continued
61
Using the Sleep Timer
With the sleep timer, you can set the stereo receiver so
that it automatically turns off after a specified period.
Checking the Remaining Sleep Time
To check the remaining sleep time, press the [SLEEP]
button.
Note that if you press the [SLEEP] button while the
sleep time is being displayed, you’ll shorten the sleep
time by 10 minutes.
Canceling the Sleep Timer
To cancel the sleep timer, press the [SLEEP] button
repeatedly until the SLEEP indicator disappears.
Press the [SLEEP] button repeatedly
to select the required sleep time.
With the [SLEEP] button, you can set the
sleep time from 90 to 10 minutes in 10
minute step.
Use the Previous and Next [ ]/[ ]
buttons or [MULTI JOG] control to set the
sleep time in 1 minute increments from 99
to 1.
When the sleep timer has been set, the
SLEEP indicator appears on the display, as
shown. The sleep time appears on the
display for about 8 seconds, then the
previous display reappears.
SLEEP
62
Troubleshooting
How to reset to factory default?
R-1045/R-1045DAB
If you have any trouble using the stereo receiver, look for a solution in this section.
C-1045
If you have any trouble using the CD Player, look for a solution in this section.
Power
Can't turn on the stereo receiver.
Make sure that the power cord is properly plugged into the wall outlet (see page 22).
Unplug the power cord from the wall outlet, wait 5 seconds or more, then plug it in again.
Can’t turn on the CD Player.
Make sure that the power cord is properly plugged into the wall outlet (page 22).
Unplug the power cord from the wall outlet, wait 5 seconds or more, then plug it in again.
The stereo receiver turns off unexpectedly.
If the sleep timer has been set and the TIMER indicator is shown on the display, the stereo receiver will turn off
automatically after a specified period.
When timed playback finishes, the stereo receiver automatically switches to Standby mode.
If the STANDBY LED is flashing, the built-in amplifier protection circuit has been activated. This can happen if
there’s a short between the positive and negative wires of a speaker cable.
Audio
There's no sound.
Make sure the stereo receivers volume control is not set to minimum (see page 25).
Make sure the correct input source is selected (see page 25).
The audio input signal selected by the input selector is output to LINE2 OUT.
However, no audio signal is output if LINE2 is selected by the input selector.
Make sure the stereo receiver is not muted (see page 26).
Make sure the speakers are connected correctly (see page 19).
Check all connections and correct as necessary (see pages 16 to 22).
While headphones are connected, the speakers output no sound (see page 26).
The speakers output no sound when it is connected with the iPod.
Make sure that there is no unsupported file formats or signals.
1 While holding down the [MODE/RETURN] button, press the [ON/STANDBY] button on the
main unit.
2 “Clear” appears for 3 seconds on the display, then the stereo receiver will automatically go
Standby.
Do not operate the stereo receiver while “Clear” is displayed.
Note that resetting the stereo receiver will delete your custom settings.
If you can’t resolve the issue yourself, try resetting the CD Player before contacting your Onkyo dealer.
To reset the CD Player to its factory defaults, turn it on and, while holding down the [ ]
button, press the [ ] button. “Clear” will appear on the display.
Note that resetting the CD Player will delete your custom settings.
Troubleshooting—Continued
63
The sound quality is not good.
Make sure the speaker cables are connected with the correct polarity (see page 19).
Make sure all audio connecting plugs are pushed in all the way (see page 16).
The sound quality can be affected by strong magnetic fields, such as that from a TV. Try moving any such devices
away from the stereo receiver.
If you have any devices that emit high-intensity radio waves near the stereo receiver, such as a cellular phone that’s
being used to make a call, the stereo receiver may output noise.
The stereo receivers precision drive mechanism may emit a faint hissing sound while reading discs during playback or
when searching for tracks. You may be able to hear this noise in extremely quiet environments.
Audio output is intermittent when the stereo receiver is subjected to vibration.
The stereo receiver is not a portable device. Use it in a location that’s not subject to shock or vibration.
Headphone output is intermittent or there's no sound.
This may be due to dirty contacts. Clean the headphones plug. See your headphones’ instruction manual for cleaning
information. Also, make sure that the headphones cable is not broken or damaged.
The headphone output no sound when it is connected with the iPod.
Audio performance
Audio performance will be at its best about 10 to 30 minutes after the stereo receiver has been turned on and had time
to warm up.
Using cable ties to bundle audio cables with speaker or power cables may degrade the sound quality, so don’t do it.
CD Playback
Can’t play a CD.
The disc is upside down. Load the disc with the label-side facing up (pages 15, 27).
The disc is dirty. Remove the disc and clean it (page 15).
Condensation has formed inside the CD Player. Remove the disc and leave the CD Player turned on for several hours
until the condensation has evaporated.
The disc is nonstandard. See “Precautions for Playback” on page 14.
The CD-R/RW disc is nonstandard. See “Precautions for Playback” on page 14.
CD playback skips.
Install the CD Player somewhere free of vibration.
The disc is dirty. Remove the disc and clean it (page 15).
The disc is very scratched. Replace the disc.
Can’t enter track numbers for memory playback.
No such track on the CD. Enter another number (pages 33 to 35).
It takes a long time to locate certain tracks.
The disc is dirty. Remove the disc and clean it (page 15).
The disc is very scratched. Replace the disc.
Troubleshooting—Continued
64
CD Player SETUP
Can’t find a SETUP menu in need.
If any track has been selected even when the CD Player is stopped, you must place it into the full stop state by pressing
the [MENU] button before you can view all the SETUP menus.
USB Flash Device Playback
Can't access the music files on a USB Flash device.
Make sure that the USB indicator light is on. If the light is not on, make sure that it is connected correctly and that the
USB Flash device is one that is supported (see pages 40).
The stereo receiver supports USB Flash devices that support the USB Flash Class. However, playback may not be
possible with some USB Flash devices even if they conform to the USB Flash Class.
Check that the memory format is FAT16 or FAT32.
USB Flash devices with an internal USB hub are not supported.
Can't play MP3/WMA/AAC files.
MP3/WMA/AAC files without a “.MP3/.WMA/.AAC” or “.mp3/.wma/.aac” filename extension are not recognized.
Tuner
Reception is noisy, stereo FM reception suffers from hiss, the Auto Preset function doesn't
preset all stations, or the FM ST indicator doesn't light up when tuned to a stereo FM
station.
Check the antenna connections (see pages 17 to 18).
Change the position of the antenna (see page 43).
Move the stereo receiver away from a nearby TV or computer.
Cars or airplanes can cause noisy interference.
The radio signal will be weakened if it has to pass through a concrete wall before reaching the antenna.
Try setting FM mode to mono (see page 43).
Move power cords and speaker cables as far away as possible from the tuner’s antenna.
When listening to an AM station, noise may be heard when you operate the remote controller.
If none of the above improves the reception, install an outdoor antenna (see page 18).
If a power outage occurs or the power cable is disconnected:
If the preset stations are lost, preset them again (see pages 48 to 49).
The clock and timer settings will be lost. Set the clock and timers again (see pages 23, 55 to 56).
Can't adjust the frequency of the radio.
Use the [ ]/[ ] buttons to change the frequency of the radio (see page 43).
RDS doesn't work.
The FM station you are tuned to doesn’t support RDS.
Install an outdoor FM antenna (see page 18).
Change the position or direction of your outdoor FM antenna (see pages 18, 43).
Move the FM antenna as far away as possible from fluorescent lights (see page 43).
Troubleshooting—Continued
65
iPod/iPhone
There's no sound.
Make sure that the iPod is connected to the receiver properly.
Make sure that no video content is being played.
Reset the iPod.
Other
Do not control Cover Flow during playback. Otherwise, the receiver may generate noise.
During playback on the iPod nano or iPod (5th generation), "ONKYO" is displayed on the iPod display and the quick
wheel cannot work.
External Components
No sound is heard from a connected component.
Make sure the correct input source is selected (see page 25).
Make sure the analog audio cable is connected correctly (see page 21).
Make sure that all audio connecting plugs are pushed in all the way (see page 16).
No sound is heard from your turntable.
Make sure the turntable has a built-in phono equalizer.
If the turntable doesn’t have a phono equalizer built-in, you must provide one.
Make sure that the turntable has a built-in phono equalizer.
If it has a phono equalizer built-in, connect the turntable to LINE1, LINE2 or LINE3 of the stereo receiver.
Remote Controller
The remote controller doesn't work properly.
Make sure the batteries have been installed with the correct polarity (+/-) (see page 8).
Replace both batteries with new ones. (Do not mix different types of batteries or new and old batteries.)
The remote controller is too far away from the stereo receiver, or there’s an obstacle between them (see page 8).
The stereo receiver’s remote control sensor is being subjected to bright light (inverter-type fluorescent light or
sunlight).
The stereo receiver is located behind the glass doors of a audio rack or cabinet.
Make sure that the iPod is connected to the receiver properly.
The remote controller does not work while the Apple logo is displayed on the iPod display.
Insert and remove the iPod connector from the receiver.
Reset the iPod.
does not work.
There’s no analog audio connection. To use you must make an analog audio connection between the C-1045 and
your Onkyo component.
Troubleshooting—Continued
66
Clock
Can't set the clock.
You cannot set the clock if USB is selected by the input selector.
Timers
Timer playback doesn't work.
Make sure the clock has been set correctly (see pages 55 to 56).
Timed operation will fail if the stereo receiver is on at the specified On time, so make sure it’s set to Standby (see pages
58 to 59).
The timer may overlap with another timer. If you program several timers, make sure they don’t overlap (see page 57).
If you press the [SLEEP] or [TIMER] button while a timed operation is in progress, the timer will be cancelled.
Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit’s
malfunction. Before you record important data, make sure that the material will be recorded correctly.
The stereo receiver contains a microcomputer for signal processing and control functions. In very rare situations,
severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that
this should happen, unplug the power cord, wait at least 5 seconds, and then plug it again.
67
Specifications
R-1045 / R-1045DAB
Amplifier Section
Rated Output Power (IEC)
2ch ×70 W at 4 ȍ, 1 kHz, 2ch
Driven
THD (Total Harmonic Distortion)
0.08 % (1kHz 1W)
Damping Factor 35 (Front, 1 kHz, 8 ȍ)
Input Sensitivity and Impedance
115 mV/33 kȍ (LINE)
2.0 mV/47 kȍ (PHONO
MM)
Output Level and Impedance
125 mV/2.2 kȍ (LINE)
Frequency Response 5 Hz-60 kHz/+1/.3 dB
(LINE1)
Tone Control Characteristies
±14 dB, 100 Hz (BASS)
±12 dB, 10 kHz (TREBLE)
+0 dB, -14 dB (BALANCE)
Signal to Noise Ratio 100 dB (LINE1, IHF-A)
75 dB(PHONO, IHF-A)
Speaker Impedance 4 ȍ - 16 ȍ
Tuner Section
FM Tuning Frequency Range
87.5 MHz - 108.0 MHz
RDS
AM Tuning Frequency Range
522 kHz - 1611 kHz
DAB/DAB+ Tuning Frequency Range (R-1045DAB only)
174.928 MHz - 239.200 MHz
General Section
Power Supply AC 220-240 V, 50/60 Hz
Power Consumption 65 W
Stand-by Power Consumption
0.3 W
Dimensions 275W × 83H × 311D mm
(W × H × D) (10.8W × 3.3H × 12.2D
inches)
Weight 5.7 kg (12.54 lbs.)
Audio Inputs
Digital Inputs 2 (OPT/COAX)
Analog Inputs 3 (LINE)
1 (PHONO)
Audio Outputs
Analog Outputs 1 (LINE)
Subwoofer Pre Outputs
1
Speaker Outputs SP-L, R
Phones 1 (3.5I)
Others
USB 1 (Front)
RI 2
C-1045
CD Section
Frequency Response 5 Hz - 20 kHz
Audio Dynamic Range 100 dB
THD (Total Harmonic Distortion)
0.003 %
Rated RCA Output Level and Impedance
2.0 V (rms) / 470 ȍ
Signal to Noise Ratio 105 dB
Audio Output/Impedance(Digital/Coaxial)
0.5V p-p / 75 ȍ
Disc compatibility Audio CD, CD-R,CD-RW,
MP3/WMA (CD-R, CD-RW)
Operating conditions Temperature/Humidity
5-35 °C/ 25-80 %
General Section
Power Supply AC 220-240 V, 50/60 Hz
Power Consumption 9 W
Stand-by Power Consumption
0.3 W
Dimensions 275W × 83H × 282D mm
(W × H × D) (10.8W × 3.3H 11.0D inches)
Weight 3.4 kg (7.48 lbs)
Audio Outputs
Digital Outputs 1 (COAX)
Analog Outputs 1
Others
RI 2
Specifications and features are subject to change without notice.
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8023 Fax: 072-831-8163
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 800-229-1687, 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.com/
ONKYO EUROPE ELECTRONICS GmbH (UK BRANCH)
The Coach House 81A High Street, Marlow, Buckinghamshire, SL7 1AB, UK
Tel: +44-(0)1628-473-350 Fax: +44-(0)1628-401-700
ONKYO CHINA LIMITED
Unit 1 & 12, 9/F, Ever Gain Plaza Tower 1, 88, Container Port Road, Kwai Chung,
N.T., Hong Kong. Tel: 852-2429-3118 Fax: 852-2428-9039
http://www.ch.onkyo.com/
W1007-1
SN 29400414
(C) Copyright 2010 ONKYO CORPORATION Japan. All rights reserved.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo CS-1045 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo CS-1045 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Onkyo CS-1045

Onkyo CS-1045 Gebruiksaanwijzing - Nederlands - 132 pagina's

Onkyo CS-1045 Gebruiksaanwijzing - Deutsch - 132 pagina's

Onkyo CS-1045 Gebruiksaanwijzing - Français - 132 pagina's

Onkyo CS-1045 Gebruiksaanwijzing - Italiano - 132 pagina's

Onkyo CS-1045 Gebruiksaanwijzing - Espanõl - 132 pagina's

Onkyo CS-1045 Gebruiksaanwijzing - Svenska - 132 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info