577606
27
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
27
Other operations
Case 1
When an error occurs, “Error!! *-**” or an error message
appears on the display of this unit. (Letters and
numbers appear in place of the asterisks.) Refer to the
descriptions below to check the meaning.
Error code
*-10, *-20: The LAN cable could not be recognized.
Connect the LAN cable properly.
*-11,*-13,*-21,*-28: Internet connection could not
be established. Check the following points.
Confirm that the IP address, subnet mask,
gateway address and DNS server setting are
correct.
Confirm that the router is turned on.
Confirm that the unit and router are connected
with a LAN cable.
Check the router setting. For the setting, see the
instruction manual of the router.
This unit may fail in network connection if your
network environment does not allow multiple
device connections. Consult your Internet
service provider (ISP).
You need a router separately if your modem
does not have the router function. Depending on
your network connection environment, you need
to configure the proxy server. For information
on the configuration, consult the document
provided by your carrier or ISP provider.
If you still cannot connect to the Internet, the
DNS server or proxy server may be temporarily
down.
Check the service status with your ISP provider.
Others: Retry from the beginning. If the error
persists, check the error code and contact Onkyo
Support shown at the end of the manual.
Case 2
If an error occurs during updating, disconnect and
reconnect the power cord, and retry updating.
Case 3
If you do not have access to the Internet, contact Onkyo
Support shown at the end of manual.
Updating the firmware via USB connection
Use the USB port to update the firmware.
You need a 32 MB or larger capacity USB flash drive
for updating.
Precautions when updating the firmware
Before updating, stop playback and disconnect
anything connected to the USB ports.
While updating, never put the unit into standby mode,
or disconnect the power cord or the USB flash drive
being used for the update.
Do not access this unit from a computer during an
update.
Completing the update takes about five minutes.
Settings are retained after an update
Update procedures
1. Connect a USB flash drive to the computer that you
are using and delete any files on it.
2. Download the firmware file to the computer from our
website.
Decompress the downloaded file on the computer.
Do not change the names of the decompressed
files.
3. Copy the decompressed files to the root folder of the
USB flash drive.
Do not copy any files other than the decompressed
files. Do not copy the compressed file.
4. Confirm that this unit is on.
5. Connect the USB flash drive with the decompressed
files to the USB port on the front of the unit.
6. Press the INPUT button to change the source to
USB(F).
“Now Initializing…” appears on the display, followed by
the name of the USB flash drive.
Loading the USB flash drive takes about 20 to 30
seconds.
7. Press the MENU button to open the menu and use
the direction ( / ) buttons to select “Update”.
8. Press the ENTER button.
9. Use the direction ( / ) buttons to select “CN via
USB?” and press the ENTER button.
This selection will not appear (and cannot be
selected) if the flash drive does not contain
firmware that can be used to update the unit.
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo C-N7050S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo C-N7050S in de taal/talen: Engels als bijlage per email.

De handleiding is 12,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Onkyo C-N7050S

Onkyo C-N7050S Gebruiksaanwijzing - Nederlands, Deutsch - 104 pagina's

Onkyo C-N7050S Gebruiksaanwijzing - Français, Italiano, Espanõl - 104 pagina's

Onkyo C-N7050S Gebruiksaanwijzing - Svenska - 104 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info