6. At this point, we’ll record the example keystrokes listed on page 39. But first make
sure the Cable Box and TV are turned off.
a. Tap on the
CBL key on the Device Selection Strip.
b. Tap on the
PWR key.
c. Tap on the
DELAY key twice for 2-second delay.
NOTE: Each DELAY keystroke is equal to 1 second.
d. Tap on the 2 key followed by the 8 key to enter channel 28.
e. Tap on the
TV key on the Device Selection Strip.
f. Tap on the
PWR key.
g. Tap on the
DELAY key once for 1-second delay.
h. Tap on the
0 key followed by the 3 key to enter channel 3.
i. Aim Mosaic at the Cable Box/TV and tap on the
TEST key.You should see the
LED blink as commands are sent to power on the Cable Box and tune it to
channel 28, followed by TV power on and tuning it to channel 3. If the macro
did not work correctly, tap on the
CLEAR key and repeat steps 6a through 6i.
7. To save the macro, tap on the
OK key.You will see the ADD MACROS Screen (as
shown on the next page).
continued on next page
Using Macros 41
USER’S GUIDE