Handleiding Olympus e 450 (pagina 39 van 147) (Engels)

289548

Verklein

Vergroot

Pagina terug

1/147

Pagina verder

http://www.olympus.com/

Premises:

Goods delivery:

Letters:

Wendenstrasse 14 – 18, 20097 Hamburg, Germany

Tel.: +49 40 - 23 77 3-0 / Fax: +49 40 - 23 07 61

Bredowstrasse 20, 22113 Hamburg, Germany

Postfach 10 49 08, 20034 Hamburg, Germany

European Technical Customer Support:

Please visit our homepage

http://www.olympus-europa.com

or call our TOLL FREE NUMBER*:

00800 - 67 10 83 00

for Austria, Belgium, Denmark, Finland, France, Germany, Luxemburg, Netherlands,

Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom.

* Please note some (mobile) phone services / provider do not permit access or request an

additional prefix to +800 numbers.

For all not listed European Countries and in case that you can’t get connected

to the above mentioned number please make use of the following

CHARGED NUMBERS:

+49 180 5 - 67 10 83

+49 40 - 237 73 48 99.

Our Technical Customer Support is available from 9 am to 6 pm MET (Monday to Friday).

Authorized Distributors

United Kingdom:

/Eire

Olympus Service Department

P.O. Box 222

Southall Middlesex UB2 4SH

Tel.: (0207) 2530513

South Africa: City Square Trading 197 (PTY) Ltd.

Unit A, The Meadows

Meadowbrooke Business Estate

Jacaranda Avenue, Olivedale Ext. 17

Johannesburg,

Tel.: +27 11 7042021

Egypt: Optoscient M. Nagui & Co

10. 26th July St., Cairo

Tel.: +20 2 391 4883

Printed in Germany · OIME · 4/2009 · Hab. · E0462319

Thank you for purchasing an Olympus digital camera. Before you start to use your new camera,

please read these instructions carefully to enjoy optimum performance and a longer service life.

Keep this manual in a safe place for future reference.

We recommend that you take test shots to get accustomed to your camera before taking important

photographs.

The screen and camera illustrations shown in this manual were produced during the development

stages and may differ from the actual product.

The contents in this manual are based on firmware version 1.0 for this camera. If there are addition

and/or modification of functions due to firmware update for the camera, the contents will differ. For

the latest information, please visit the Olympus website.

DIGITAL CAMERA

INSTRUCTION

MANUAL

INSTRUCTION MANUAL

Basic guide P. 2

Review the camera part names and the

basic steps for shooting and playback.

Table of Contents P. 20

E-450_Umschlag_Master.fm Seite 1 Donnerstag, 16. April 2009 10:33 10

Camera

Shutter button

P. 16, 31

Mode dial

P. 4

(Exposure

compensation) button

P. 4 8

Control dial (

)

P. 19, 26

Strap eyelet

P. 1 0

Self-timer/Remote control lamp/

Remote control receiver

P. 56, 57

Lens attachment mark

P. 1 2

Hot shoe

P. 7 0

Mirror

P. 3 7

Lens release button

P. 1 2

Lens lock pin

Built-in flash

P. 6 8

(Remote control/Self-timer/

Sequential shooting) button

P. 55–58, 85

COPY

(Copy/Print) button

P. 80, 93

(Flash) button

P. 6 8

Mount

(Attach the lens after removing the body cap from

the camera to prevent dust and dirt from entering

the camera body.)

Strap eyelet

P. 1 0

E-450_MASTER.fm Seite 2 Donnerstag, 16. April 2009 10:40 10

Basic guide

LCD monitor

P. 8, 9, 36

Viewfinder

P. 6

(Erase) button

P. 8 2

INFO

(Information

display) button

P. 28, 40, 74

button

P. 2 9

(Playback) button

P. 7 4

AEL

AFL

button

P. 37, 49, 84

(Protect)

button

P. 8 1

button

P. 2 9

Arrow pad

(

acbd

)

P. 29, 85

Card cover

P. 1 3

CF card slot

P. 1 3

Eject button

P. 1 3

Multi-connector

P. 78, 94, 98

Connector cover

xD-Picture Card slot

P. 1 3

Diopter adjustment

dial

P. 1 4

Eyecup

P. 5 6

Power switch

P. 1 4

Tripod socket

Battery compartment

lock

P. 11

Battery compartment

cover

P. 11

(Live view)

button

P. 3 6

Card access lamp

P. 13, 16, 99

Names of parts and functions

E-450_MASTER.fm Seite 3 Donnerstag, 16. April 2009 10:40 10

Mode dial

The mode dial allows you to change the

camera settings easily according to the

subject.

•

For more advanced shooting and greater creative control, you can set the aperture value and

shutter speed.

•

The settings made in the advanced shooting modes are retained even if the camera is turned off.

•

Select according to the shooting scene. The camera sets the appropriate shooting conditions

automatically.

•

When rotating the mode dial or turning off the power in the easy shooting modes, functions with

changes made to their settings are restored to the factory default settings.

Program shooting

Allows you to shoot using an aperture and shutter speed that

the camera sets. (

P. 43)

Aperture priority

shooting

Allows you to set the aperture manually. The camera sets the

shutter speed automatically. (

P. 4 3 )

Shutter priority

shooting

Allows you to set the shutter speed manually. The camera

sets the aperture automatically. (

P. 44)

Manual shooting

Allows you to set the aperture and shutter speed manually.

(

P. 45)

AUTO

Allows you to shoot using an optimum aperture and shutter

speed that the camera sets. The built-in flash pops up

automatically in low-light conditions.

Art filter/Scene

When you select a desired filter or scene, the camera

optimizes the shooting conditions for that filter or scene. Most

of the functions cannot be changed.

PORTRAIT

Suitable for shooting a portrait-style image of a person.

LANDSCAPE

Suitable for shooting landscapes and other outdoor scenes.

MACRO

Suitable for taking close-up pictures.

SPORT

Suitable for capturing fast-moving action without blurring.

NIGHT+PORTRAIT

Suitable for shooting both the main subject and background

at night.

Advanced shooting modes

Easy shooting modes

E-450_MASTER.fm Seite 4 Donnerstag, 16. April 2009 10:40 10

Basic guide

1 Set the mode dial to g.

• The art filter menu is displayed. Press d to display the scene menu.

2 Use ac to select the filter or scene.

3 Press the i button.

• To change the setting, press the i button again to display the menu.

•

Art filters are not applied to RAW images.

•

If the record mode is set to

[RAW]

and art filter is applied, the record mode is automatically set to

[RAW+

•

The grainy appearance of the picture may be emphasized depending on the type of art filter.

Setting the art filter/scene

POP ART1

SET

PORTRAIT1

SET

Icon Art filter Icon Art filter

POP ART

PIN HOLE

SOFT FOCUS

Types of art filters

Types of scene modes

Icon Mode Icon Mode

1PORTRAIT

10 DIS MODE

2 LANDSCAPE

11 MACRO

3 LANDSCAPE+PORTRAIT

12 NATURE MACRO

4 NIGHT SCENE

13 CANDLE

5 NIGHT+PORTRAIT

14 SUNSET

6 CHILDREN

(

15 FIREWORKS

7SPORT

16 DOCUMENTS

8 HIGH KEY

17 PANORAMA

9LOW KEY

18 BEACH & SNOW

Names of parts and functions

E-450_MASTER.fm Seite 5 Donnerstag, 16. April 2009 10:40 10

Viewfinder

AF target

P. 5 3

Aperture value

P. 43–46

Battery check

(ready for use)

(charging required)

Flash

P. 6 6

(blinks: charging in progress,

lights up: charging completed)

AE lock

P. 4 9

Shutter speed

P. 43–46

Shooting mode

P. 4

Metering mode

P. 4 7

Exposure compensation

value

P. 4 8

White balance

(Displayed when set to a

setting other than auto

white balance.)

P. 6 0

AF confirmation mark

P. 16, 43, 54

E-450_MASTER.fm Seite 6 Donnerstag, 16. April 2009 10:40 10

Basic guide

Super control panel

The following screen allows the display and setting of shooting settings at the same time

and is called the super control panel. Press the

INFO

button to display the super control

panel on the LCD monitor.

“Using the super control panel” (P. 28)

Shutter speed

P. 43–46

Exposure compensation indicator

P. 4 8

Exposure level indicator

P. 4 5

Flash intensity control indicator

P. 6 9

Aperture value

P. 43–46

Sharpness

P. 6 3

Contrast

P. 6 3

Saturation

P. 6 3

Gradation

P. 6 4

B&W filter

P. 6 3

Picture tone

P. 6 3

Super FP flash

P. 7 1

Noise reduction

P. 6 5

Auto bracket

P. 4 9

RC mode

P. 7 1

AF illuminator

P. 8 3

Internal temperature warning

P. 11 0

White balance

P. 6 0

White balance compensation

P. 6 2

ISO sensitivity

P. 5 0

Metering mode

P. 4 7

AF mode

P. 5 1

AF target

P. 5 3

Record mode

P. 5 9

Flash intensity control

P. 6 9

Number of storable

still pictures

P. 121

Remote control/Self-timer/Sequential shooting

P. 55–58

Card

P. 11 3

Flash mode

P. 6 6

The functions within this area can be set on the

super control panel.

250 F5.6

+2.0

2008. 08.16

arge

BKT

Normal

OFF

Face

detection

P. 3 9

Battery check

P. 6

Flash charging

P. 6 8

Shooting mode

P. 4

Date

P. 1 5

Exposure

compensation value

P. 4 8

Exposure level

P. 4 5

Picture mode

P. 6 3

Color space

P. 8 8

Names of parts and functions

E-450_MASTER.fm Seite 7 Donnerstag, 16. April 2009 10:40 10

LCD monitor (Live view)

You can use the LCD monitor to view the subject while shooting. Press the

button to

use live view.

“Using live view” (P. 36)

250250250 F5.6F5.6 +2.0+2.0

AEL

H-AF

BKTFPRC

WBWB

AUTOAUTO

ISOISO

AUTOAUTO

3 838

Exposure

compensation value

P. 4 8

Flash intensity control

P. 6 9

Internal temperature warning

P. 11 0

Face detection

P. 3 9

AF target

P. 5 3

AF confirmation mark

P. 16, 38, 54

Histogram

P. 108

Flash mode

P. 6 6

Metering mode

P. 4 7

Flash

P. 6 8

(blinks: charging in progress,

lights up: charging completed)

Sequential shooting

P. 5 5

Self-timer

P. 5 6

Remote control

P. 5 7

White balance

P. 6 0

ISO sensitivity

P. 5 0

Record mode

P. 5 9

Number of storable

still pictures

P. 121

Shutter speed

P. 43–46

Aperture value

P. 43–46

RC mode

P. 7 1

Super FP flash

P. 7 1

Auto bracket

P. 4 9

AE lock

P. 4 9

Live view AF mode

P. 3 7

Battery check

P. 6

Shooting mode

P. 4

Card

P. 11 3

E-450_MASTER.fm Seite 8 Donnerstag, 16. April 2009 10:40 10

Basic guide

LCD monitor (Playback)

You can switch the monitor display using the

INFO

button.

“Information display” (P. 76)

1/250 F5.6

250 F5.6

+2.0 45mm

ISO 1 00

ISO 100

0.0

A: 0

WB : AUTO

G: 0

NATURAL

sRGB

[3648 x2736, 1/8]

[3648x2736,1/8]

’08.0 8.16

’08.08.16

21:56

100-0 015

100-0015

Battery check

P. 6

Card

P. 11 3

Print reservation

Number of prints

P. 9 1

Protect

P. 8 1

Record mode

P. 5 9

Date and time

P. 1 5

File number

P. 7 6

Picture mode

P. 6 3

Color space

P. 8 8

Shooting

information

Single-frame playback information

Record mode

P. 5 9

Frame number

P. 7 6

Aperture value

P. 43–46

Shooting mode

P. 4

Focal length

P. 11 5

(The focal length is displayed in

1 mm units.)

Exposure compensation

P. 4 8

Shutter speed

P. 43–46

ISO sensitivity

P. 5 0

Flash intensity control

P. 6 9

White balance compensation

P. 6 2

Metering mode

P. 4 7

AF target

P. 5 3

White balance

P. 6 0

Histogram

P. 7 6

Names of parts and functions

E-450_MASTER.fm Seite 9 Donnerstag, 16. April 2009 10:40 10

Unpack the box contents

The following items are included with the camera.

If anything is missing or damaged, contact the dealer from whom you purchased the camera.

Camera Body cap Strap BLS-1 Lithium ion

battery

BCS-1 Lithium ion

charger

USB cable Video cable

Eyepiece cover

• OLYMPUS Master 2 CD-ROM

• Instruction manual

• Warranty card

Lastly, pull the strap tight

making sure that it is

fastened securely (

Attaching the strap

• Attach the other end of the strap to the other eyelet in the same way.

Thread the eyepiece cover through one end of the

strap (

). Thread the strap as indicated by the

arrows (

E-450_MASTER.fm Seite 10 Donnerstag, 16. April 2009 10:40 10

Basic guide

Preparing the battery

BLS-1 Lithium ion battery

AC wall outlet

BCS-1 Lithium ion

charger

AC cable

Battery lock

It is recommended to set aside a backup battery for prolonged shooting in case the battery in

use drains.

Charging the battery

Close the battery compartment cover

•

Close the battery compartment cover until you hear a click.

Press the battery lock to

unlock the battery.

Direction

indicating mark

Unloading the

battery

Loading the battery

Charging indicator

Amber light: Charging in progress

Blue light: Charging completed

(Charging time: Approx. 3 hours

30 minutes)

Amber blinking: Charging error

Battery compartment

cover

Battery compartment

lock

Preparations for shooting

E-450_MASTER.fm Seite 11 Donnerstag, 16. April 2009 10:40 10

Attaching a lens to the camera

Rear cap

Body cap

Lens cap

Lens attachment

mark (Red)

Alignment mark (Red)

Lens release button

Remove the body cap from the camera

and the rear cap from the lens

Attach a lens to the camera

Remove the lens cap

(

)

Removing the lens from the

camera

While pressing the lens release button

(

), rotate the lens in the direction of

the arrow (

•

Align the lens attachment mark

(red) on the camera with the

alignment mark (red) on the

lens, then insert the lens into

the camera’s body (

•

Rotate the lens in the direction

indicated by the arrow until you

hear it click (

•

Make sure the power switch is set

to OFF.

•

Do not press the lens release

button.

E-450_MASTER.fm Seite 12 Donnerstag, 16. April 2009 10:40 10

Basic guide

Loading the card

xD-Picture Card

CompactFlash/Microdrive

Open the card cover.

Insert the card until it is locked into place.

Open the card cover.

Insert the card’s contact area into the slot as

far as it can go.

xD-Picture Card slot

Card cover

CF card slot

mark

Eject button

Removing the card

Never open the card cover while the card

access lamp is blinking.

•

Press the eject button all the way in to

make it pop out. Press the eject button

again all the way in to eject the card.

•

Pull out the card.

•

Press the inserted card lightly and it will be

ejected.

•

Pull out the card.

xD-Picture Card

CompactFlash/Microdrive

Card access lamp

Connector

Preparations for shooting

E-450_MASTER.fm Seite 13 Donnerstag, 16. April 2009 10:40 10

Power on

Dust reduction function operation

The dust reduction function is automatically activated when the camera is turned on. Ultrasonic

vibrations are used to remove dust and dirt from the image pickup device’s filter surface. The SSWF

(Super Sonic Wave Filter) indicator blinks while dust reduction is working.

Adjust the viewfinder’s diopter in accordance

with your vision.

While looking through the viewfinder, rotate

the diopter adjustment dial little by little.

When you can see the AF target clearly,

adjustment is complete.

Adjusting the viewfinder’s

diopter

Viewfinder

Diopter adjustment dialAF target

SSWF indicator

When the camera is turned on, the

super control panel screen is

displayed on the monitor.

If the super control panel screen

does not appear, press the

INFO

button.

Set the mode dial to

AUTO

INFO

button

Super control panel

Set the camera’s power switch to ON.

•

To turn off the power, set the power switch to

OFF

Power switch

Mode dial

LCD monitor

2008. 08.16

arge

Normal

OFF

AUTO

E-450_MASTER.fm Seite 14 Donnerstag, 16. April 2009 10:40 10

Basic guide

Setting the date/time

SEC

CF/xD

REC VIEW

ENG.

NTSC

VIDEO OUT

CANCEL SELECT

’

±0

Date and time information is recorded on the card together with the

images. The file name is also included with the date and time

information. Be sure to set the correct date and time before using

the camera.

CARD SETUP

NORM

AUTO

CUSTOM RESET

PICTURE MODE

GRADATION

CANCEL SELECT

Y/M/D

CANCEL

MD TIME

2009

Y/M/D

CANCEL

M D TIME

2009 03 01 14 00

Y/M/D

M D TIME

GOCANCEL

2009 03 01 14 00

Y/M/D

M D TIME

GOCANCEL

SEC

CF/xD

REC VIEW

ENG.

NTSC

VIDEO OUT

CANCEL SELECT

±0

’09.03.01

14:01

Press the

button

Use

to select [

then press

Use

to select

[

], then press

Use

to select [Y],

then press

Repeat this procedure until

the date and time are

completely set

Use

to select the

date format

Press the

button

Press the

button

to exit

button

•

The time is displayed in the 24-hour format.

Arrow pad

acbd

•

The menu screen is displayed on

the LCD monitor.

Preparations for shooting

E-450_MASTER.fm Seite 15 Donnerstag, 16. April 2009 10:40 10

Shooting

250 F5.6

2008. 08.16

arge

Normal

OFF

AUTO

Shutter button

Card access

lamp

•

The shutter sounds and the picture is taken.

•

The card access lamp blinks and the camera starts recording the picture.

AF confirmation

mark

Aperture value

Shutter speed

Place the AF target on the

subject while viewing

through the viewfinder

Adjust the focus

Release the shutter

Press the shutter

button halfway.

Viewfinder

Press the shutter button all

the way (fully).

Never remove the battery or card while the card access lamp is blinking. Doing so could

destroy stored pictures and prevent storage of pictures you have just taken.

•

The focus is locked when a beep tone is output. The AF confirmation mark and the AF

target in focus light up in the viewfinder.

•

The shutter speed and aperture value that have been set automatically by the camera are

displayed.

•

The super control panel is not displayed while the shutter button is pressed.

Viewfinder

AF target

Super control panel

E-450_MASTER.fm Seite 16 Donnerstag, 16. April 2009 10:40 10

Basic guide

button

Horizontal grip Vertical grip

Keep your fingers and the

strap away from the lens

and flash.

Taking a picture

while viewing the

monitor

It is possible to use the LCD monitor as a

viewfinder and check the subject’s composition,

or shoot while viewing an enlarged display on the

LCD monitor.

“Using live view” (P. 36)

Press the

(live

view) button to switch

to live view

If no operations are performed for approximately 8 seconds while the camera is on,

the monitor backlight turns off to save battery power (when the super control panel

is lit). If no operations are performed for approximately one minute thereafter, the

camera enters the sleep mode (stand-by) and stops operating. The camera

activates again when you touch any button (the shutter button,

button, etc.).

“BACKLIT LCD (Backlight timer)” (P. 86), “SLEEP” (P. 86)

•

The subject is displayed on the

LCD monitor.

Press the shutter button to

take the picture

•

The picture is taken with the focus adjusted.

Shutter button

Holding the camera

When the camera stops operating

250

F5.6

250

F5.6

3 8

Preparations for shooting

E-450_MASTER.fm Seite 17 Donnerstag, 16. April 2009 10:40 10

Playback/Erasing

Displays the

previous frame

Displays the

next frame

button

Displays the frame

that is stored 10

frames ahead

Displays the frame

that is stored 10

frames back

Each time you turn the control dial towards

, the

image is incrementally enlarged from 2x to 14x.

Control dial

button

Playing back

images

Pressing the

button displays the last picture taken.

Close-up

playback

Erasing images

Play back the image you want to erase and press the

button.

Use

to select

[YES]

and press the

button to

erase.

Arrow pad

ERASE

YES

CANCEL SELECT

E-450_MASTER.fm Seite 18 Donnerstag, 16. April 2009 10:40 10

Basic guide

Indications used in this manual

The operation button icons on the body of the camera are used to indicate the operation

buttons in this manual. See “Names of parts and functions” (

P. 2 ) .

In this manual,

indicates the control dial.

The following symbols are used throughout this manual.

To make the most of this manual

You can use the “Table of Contents” (P. 20) or “Index” (P. 141) as well as the following

reference to search for information on camera functions and operations. Use this manual

according to shooting conditions and to find the desired information.

For information on the possible shooting functions:

“Shooting guides” (P. 31)

For information on how to operate the camera:

“Using the direct buttons” (P. 27)

“Using the super control panel” (P. 28)

“Using the menu” (P. 29)

Functions available during live view:

“Using live view” (P. 36)

To search for a function from a list:

“Menu directory” (P. 123)

“Index” (P. 141)

Notes

Important information on factors which may lead to a

malfunction or operational problems. Also warns of operations

that should be absolutely avoided.

Useful information and hints that will help you get the most out

of your camera.

Reference pages describing details or related information.



TIPS

Preparations for shooting

E-450_MASTER.fm Seite 19 Donnerstag, 16. April 2009 10:40 10

Table of Contents

Names of parts and functions .......................................................................................... 2

Camera ........................................................................................................... 2

Mode dial......................................................................................................... 4

Viewfinder........................................................................................................ 6

Super control panel......................................................................................... 7

LCD monitor (Live view).................................................................................. 8

LCD monitor (Playback) .................................................................................. 9

Preparations for shooting............................................................................................... 10

Unpack the box contents............................................................................... 10

Preparing the battery......................................................................................11

Attaching a lens to the camera...................................................................... 12

Loading the card ........................................................................................... 13

Power on....................................................................................................... 14

Setting the date/time ..................................................................................... 15

Shooting........................................................................................................ 16

Playback/Erasing .......................................................................................... 18

Indications used in this manual ..................................................................... 19

Using the direct buttons ................................................................................................. 27

Using the super control panel ........................................................................................ 28

Using the menu.............................................................................................................. 29

Resetting to the factory default settings......................................................................... 30

Basic function guides..................................................................................................... 31

Focus – Operating the shutter button............................................................ 31

Brightness – Exposure compensation........................................................... 31

Color – White balance................................................................................... 32

A guide to functions for different subjects...................................................................... 32

Taking landscape pictures............................................................................. 32

Taking flower pictures.................................................................................... 33

Taking night scene pictures........................................................................... 35

Basic guide 2

Identifies the camera part names and describes the basic steps for shooting and playback.

1 Basic camera operations 26

Describes the basic operations of the camera.

Shooting guides – Improving your shooting skills 31

Describes shooting methods for various shooting situations.

E-450_MASTER.fm Seite 20 Donnerstag, 16. April 2009 10:40 10

Activating live view......................................................................................................... 36

Functions available during live view.............................................................. 36

The live view mechanism .............................................................................. 37

Taking a picture using live view...................................................................................... 37

AF operation during live view ........................................................................ 38

Using the face detection function................................................................................... 39

Taking a picture using manual focus.............................................................................. 40

Switching the information display................................................................................... 40

Taking a picture while comparing the effect................................................................... 41

Enlarged display operation ............................................................................................ 41

Panorama shooting........................................................................................................ 42

Program shooting........................................................................................................... 43

Aperture priority shooting............................................................................................... 43

Shutter priority shooting................................................................................................. 44

Manual shooting............................................................................................................. 45

Bulb shooting ................................................................................................ 46

Preview function............................................................................................................. 46

Changing the metering mode......................................................................................... 47

Exposure compensation ................................................................................................ 48

AE lock........................................................................................................................... 49

AE bracketing................................................................................................................. 49

ISO sensitivity setting..................................................................................................... 50

AF mode selection ......................................................................................................... 51

S-AF (single AF)............................................................................................ 51

C-AF (continuous AF) ................................................................................... 52

MF (manual focus) ........................................................................................ 52

Simultaneous use of S-AF mode and MF mode (S-AF+MF) ........................ 52

Simultaneous use of C-AF mode and MF mode (C-AF+MF)........................ 53

AF target selection......................................................................................................... 53

Focus lock – If correct focus cannot be obtained........................................................... 54

Sequential shooting ....................................................................................................... 55

Self-timer shooting......................................................................................................... 56

Remote control shooting................................................................................................ 57

Anti-shock ......................................................................................................................58

3 Using live view 36

Functions and operations available only during live view will be explained.

4 Exposure 43

Describes functions related to exposure, which is important for shooting. These functions

are for determining the aperture value, shutter speed, and other settings by measuring the

brightness in the picture.

5 Focusing and shooting functions 51

Describes the optimal focusing methods according to the subject and shooting conditions.

E-450_MASTER.fm Seite 21 Donnerstag, 16. April 2009 10:40 10

Selecting the record mode............................................................................................. 59

Recording formats......................................................................................... 59

Selecting the record mode ............................................................................ 60

Selecting the white balance ........................................................................................... 60

Setting the auto/preset/custom white balance .............................................. 61

WB compensation......................................................................................... 62

Setting the one-touch white balance ............................................................. 63

Picture mode.................................................................................................................. 63

Gradation .......................................................................................................................64

Noise reduction.............................................................................................................. 65

Noise filter...................................................................................................................... 65

Flash mode setting......................................................................................................... 66

Built-in flash shooting..................................................................................................... 68

Flash intensity control .................................................................................................... 69

External flash shooting................................................................................................... 70

Shooting with the Olympus wireless RC flash system................................................... 71

Using commercially available flashes ............................................................................ 73

Single-frame/Close-up playback.................................................................................... 74

Index display/Calendar display ...................................................................................... 75

Information display......................................................................................................... 76

Slideshow.......................................................................................................................77

Rotating images............................................................................................................. 77

Playback on TV.............................................................................................................. 78

Editing still images ......................................................................................................... 78

Copying images ............................................................................................................. 80

Protecting images .......................................................................................................... 81

Erasing images .............................................................................................................. 82

6 Record mode, white balance, and picture mode 59

Describes image adjustment functions specific to digital cameras.

7 Flash shooting 66

Describes how to shoot with the built-in flash and an external flash.

8 Playback functions 74

Describes the functions for image playback.

E-450_MASTER.fm Seite 22 Donnerstag, 16. April 2009 10:40 10

Custom Menu 1.............................................................................................................. 83

AF/MF ....................................................................................................................... 83

AF ILLUMINAT............................................................................................... 83

FOCUS RING................................................................................................ 83

RESET LENS................................................................................................ 83

BULB FOCUSING......................................................................................... 83

BUTTON/DIAL .......................................................................................................... 83

DIAL FUNCTION........................................................................................... 83

DIAL DIRECTION ......................................................................................... 84

AEL/AFL........................................................................................................ 84

AEL/AFL MEMO............................................................................................ 85

FUNCTION............................................................................................... 85

FUNCTION............................................................................................. 85

DISP/

/PC.............................................................................................................. 86

................................................................................................................. 86

SLEEP........................................................................................................... 86

BACKLIT LCD (Backlight timer).................................................................... 86

USB MODE................................................................................................... 86

LIVE VIEW BOOST....................................................................................... 87

FACE DETECT........................................................................................ 87

FRAME ASSIST (Ruled lines display) .......................................................... 87

EXP/

/ISO ............................................................................................................ 87

ISO-AUTO SET............................................................................................. 87

ISO-AUTO..................................................................................................... 87

AEL Metering ................................................................................................ 87

BULB TIMER................................................................................................. 87

CUSTOM.............................................................................................................. 87

........................................................................................................... 87

AUTO POP UP.............................................................................................. 88

/COLOR/WB........................................................................................................ 88

ALL

...................................................................................................... 88

COLOR SPACE............................................................................................. 88

SET ........................................................................................................ 88

PIXEL COUNT .............................................................................................. 88

RECORD/ERASE ..................................................................................................... 89

RAW+JPEG ERASE ..................................................................................... 89

FILE NAME ................................................................................................... 89

dpi SETTING................................................................................................. 89

Custom Menu 2.............................................................................................................. 90

CF/xD............................................................................................................ 90

(Monitor brightness adjustment)............................................................. 90

(Changing the display language) ........................................................ 90

VIDEO OUT .................................................................................................. 90

REC VIEW .................................................................................................... 90

FIRMWARE................................................................................................... 90

9 Customizing your camera 83

Describes how to customize the camera’s settings.

E-450_MASTER.fm Seite 23 Donnerstag, 16. April 2009 10:40 10

Print reservation (DPOF) ............................................................................................... 91

Print reservation............................................................................................ 91

Single-frame reservation............................................................................... 91

All-frame reservation..................................................................................... 92

Resetting the print reservation data .............................................................. 92

Direct printing (PictBridge)............................................................................................. 93

Connecting the camera to a printer............................................................... 94

Easy printing ................................................................................................. 94

Custom printing............................................................................................. 95

Flowchart .......................................................................................................................97

Using the provided OLYMPUS Master software............................................................ 97

What is OLYMPUS Master?.......................................................................... 97

Connecting the camera to a computer........................................................................... 98

Start up the OLYMPUS Master software........................................................................ 99

Displaying camera images on a computer..................................................................... 99

Downloading and saving images .................................................................. 99

Disconnecting the camera from your computer ............................................ 99

Viewing still images...................................................................................................... 101

To increase the number of languages.......................................................................... 101

Transferring images to your computer without using OLYMPUS Master..................... 102

Shooting tips and information ...................................................................................... 103

Tips before you start taking pictures............................................................ 103

Shooting tips ............................................................................................... 103

Additional shooting tips and information...................................................... 106

Playback tips............................................................................................... 108

Viewing pictures on a computer.................................................................. 108

Error codes .................................................................................................................. 109

Camera maintenance....................................................................................................111

Cleaning and storing the camera .................................................................111

Cleaning mode – Removing dust .................................................................112

Pixel mapping – Checking the image processing functions .........................112

10 Printing 91

Describes how to print your pictures.

11 Using the OLYMPUS Master software 97

Describes how to transfer and store your camera images to a computer.

12 Shooting tips and maintenance 103

Refer to this section for troubleshooting and camera maintenance information.

E-450_MASTER.fm Seite 24 Donnerstag, 16. April 2009 10:40 10

Card basics...................................................................................................................113

Usable cards ................................................................................................113

Formatting the card......................................................................................114

Battery and charger ......................................................................................................114

Using your charger abroad ...........................................................................................114

Interchangeable lenses.................................................................................................115

ZUIKO DIGITAL interchangeable lens .........................................................115

ZUIKO DIGITAL lens specifications .............................................................116

Program line diagram (

mode) ...................................................................................118

Exposure warning display.............................................................................................118

Flash modes that can be set by shooting mode ...........................................................119

White balance color temperature................................................................................. 120

Record mode and file size/number of storable still pictures......................................... 121

Functions that can be registered in Custom Reset Settings........................................ 122

Menu directory ............................................................................................................. 123

Glossary....................................................................................................................... 126

Specifications............................................................................................................... 129

E-System Chart............................................................................................................ 132

SAFETY PRECAUTIONS............................................................................................ 134

Index ............................................................................................................................ 141

13 Information 113

Refer to this section for information on optional accessories, camera specifications, and

other useful shooting information.

E-450_MASTER.fm Seite 25 Donnerstag, 16. April 2009 10:40 10

Basic camera operations

There are three basic ways to make function settings with this camera.

1 Using the direct buttons to operate the camera P. 27

You can make the function settings by rotating the control dial while pressing the direct buttons

assigned to a function.

2 Setting while looking at the super control panel P. 28

You can make the function settings with the super control panel on the LCD monitor. You can

use the super control panel to view the current settings and directly change the settings.

3 Setting on the menu P. 29

You can use the menu to set shooting and playback settings and customize camera functions.

Descriptions in this manual

The operating instructions of the direct buttons, super control panel and menu are described as

follows in this manual.

•

“+”

indicates operations performed at the same time.

•

“



”

indicates you should proceed to the next step.

e.g.: When setting the flash intensity control

Direct button

Fj

Super control panel

ip

: [

]



[

]



[

]

E-450_MASTER.fm Seite 26 Donnerstag, 16. April 2009 10:40 10

Basic camera operations

Press the button for the function you want to set.

•

The direct menu is displayed.

Turn the control dial to change the setting.

•

Press the

button to confirm your setting. Or if you do not operate the control dial within a few

seconds, your setting will be confirmed and the super control panel screen will be restored.

List of direct buttons

The functions assigned to buttons are as shown below.

To assign other functions so they can be set with direct buttons:

You can also assign frequently used functions to the

and

buttons.

“

FUNCTION” (P. 85), “

FUNCTION” (P. 85)

Using the direct buttons

No. Direct buttons Function Ref. page

Remote control/Self-timer/

Sequential shooting button

Remote control/Self-timer/

Sequential shooting

P. 55–58

Exposure compensation button Exposure compensation P. 48

Live view button Turns live view on or off P. 36

Flash button

Pops up the flash and sets

flash mode

P. 6 6

Exposure compensation button

Flash button

Flash intensity control P. 69



TIPS

SELECT GO

Direct menu

Control dial

e.g.) Setting Sequential/Self-timer/

Remote control shooting

E-450_MASTER.fm Seite 27 Donnerstag, 16. April 2009 10:40 10

Basic camera operations

Select an item on the super control panel and change the setting.

Press the

INFO

button to display the super control

panel on the LCD monitor.

•

Press the

INFO

button again to turn off the super control

panel.

•

Press the

button during live view to display the super

control panel.

Use the control dial to change the setting.

•

Press the

button to display the direct menu indicated at

the position of the cursor. You can also use the direct

menu to change the setting. After changing the setting,

press the

button to confirm your setting. If no operation

is made within a few seconds, your setting is confirmed

and the super control panel is displayed.

Using the super control panel

Press the

button.

•

The cursor on the super control panel

lights.

Use

to move the cursor to the

function you want to set.

For details on the functions that can be set with the super control panel, refer to

“Super control panel” (

P. 7 ) .

Control dial

Arrow pad

button

INFO

button

2008. 08.16

arge

Normal

OFF

arge

Normal

OFF

ISO

Cursor

The name of the selected

function is displayed.

arge

Normal

OFF

METERING

SELECT GO

Direct menu

E-450_MASTER.fm Seite 28 Donnerstag, 16. April 2009 10:40 10

Basic camera operations

Press the

button.

•

The menu is displayed on the LCD monitor.

Press the

button to confirm your settings.

•

Press the

button repeatedly to exit the menu.

Using the menu

Use

to select a tab

and

to set an item.

Use

to select a function and

to go to the

setting screen.

For details on the functions that can be set with the menu, refer to “Menu

directory” (

P. 123).

button

Arrow pad

button

CARD SETUP

NORM

AUTO

CUSTOM RESET

PICTURE MODE

GRADATION

CANCEL SELECT

Operation guide is displayed at the bottom of the screen.

: Press the

button to cancel the setting.

:Press

dac

on the arrow pad to move the cursor and select an item.

The symbols displayed on the LCD monitor correspond to the arrow pad

shown below.

: Press the

button to confirm your settings.

CANCEL

SELECT

Tab The current setting

is displayed

METERING

S-AF

0.0

OFF

RC MODE

AF MODE

AF AREA

ANTI-SHOCK

AUTO

CANCEL SELECT

S-AF

AUTO

0.0

METERING

OFF

RC MODE

AF MODE

AF AREA

ANTI-SHOCK

CANCEL SELECT

Function

METERING

RC MODE

AF MODE

AF AREA

ANTI-SHOCK

CANCEL SELECT

METERING

Types of tabs

(Shooting menu 1)

Sets shooting functions.

(Shooting menu 2)

Sets shooting functions.

(Playback menu)

Sets playback functions.

(Custom menu 1)

Customizes shooting functions. Depending on the

function being customized, the function is further

separated into 8 tabs (A to H).

(Custom menu 2)

Sets the basic functions of the camera.

AF/MF

BUTTON/DIAL

DISP/

/PC

EXP/

/ISO

CUSTOM

CANCEL SELECT

/COLOR/WB

Screenshot of menu with the

tab selected

Tab

E-450_MASTER.fm Seite 29 Donnerstag, 16. April 2009 10:40 10

Basic camera operations

Normally, current camera settings (including any changes you have made) are retained when

the power is turned off. To reset the camera to the factory default settings, set

[RESET]

. You

can register settings in advance to

[RESET1]

and

[RESET2]

. The camera settings at that time

are registered in

[RESET1]

and

[RESET2]

. For details on the registered functions, refer to

“Functions that can be registered in Custom Reset Settings” (

P. 122).

Registering [RESET1]/[RESET2]

Select either [RESET1]/[RESET2] to register and press

•

If settings have already been registered,

[SET]

is displayed next to

[RESET1]

[RESET2]

Selecting

[SET]

again overwrites the registered setting.

•

To cancel the registration, select

[RESET]

Select [SET] and press the

button.

Using reset settings

You can reset the camera to

[RESET1]

[RESET2]

setting or restore the factory default

settings.

[RESET]

: Resets to the factory default settings. For the default settings, see

“Menu directory” (

P. 123).

[RESET1]/[RESET2]

: Resets to the registered settings.

Select [RESET], [RESET1], or [RESET2] and press

the

button.

Use

to select [YES], then press the

button.

Resetting to the factory default settings



[

]



[CUSTOM RESET]



[

]



[CUSTOM RESET]

RESET1

YES

CANCEL SELECT

E-450_MASTER.fm Seite 30 Donnerstag, 16. April 2009 10:40 10

Shooting guides – Improving your shooting skills

Shooting guides –

Improving your shooting skills

To familiarize yourself with the camera, you can start off by taking pictures of surrounding

subjects, such as children, flowers and pets. If the pictures taken are not to your liking, try

adjusting some of the settings below. You can take more satisfying pictures simply by

familiarizing yourself with these basic camera functions.

Focus – Operating the shutter button

A picture can become out of focus when the focus in the

picture is on the foreground, background, or other objects in

the picture instead of on the subject. To prevent out-of-focus

pictures, be sure to focus on the subject you are trying to

capture. The shutter button can be pressed halfway down

(half-press) and all the way down (full press). Once you are

able to operate the shutter button effectively, you can focus

accurately even on moving subjects.

“Shooting” (P. 16), “Focus lock – If correct focus cannot

be obtained” (P. 54)

Even when the subject is in focus, the picture can become

blurred if you move the camera while the shutter button is

being pressed. This is called “camera shake”. Make sure

how to properly hold the camera. The camera is particularly

subject to shaking when using live view to take pictures while

viewing the subject on the monitor.

“Holding the camera” (P. 17)

In addition to incorrect focusing and camera shake, movement of the subject can also cause

blurring of the picture. In this case, use a shutter speed that matches the motion of the subject.

You can confirm the actual shutter speed and aperture on the displays of the viewfinder and

monitor by pressing the shutter button halfway.

“Viewfinder” (P. 6), “Super control panel” (P. 7), “LCD monitor (Live view)” (P. 8)

Brightness – Exposure compensation

The camera automatically determines the aperture value and

shutter speed according to the brightness level. This is called

auto exposure. However, you may not be able to capture the

intended picture with auto exposure alone. In this case, you

can increase or decrease the auto exposure setting.

Compensate the exposure toward + to enhance the

brightness of a summer beach or the whiteness of snow.

Compensate the exposure toward – when the area to be

shot is brighter but smaller compared to its surrounding area.

If you are unsure of how much exposure compensation is

required, try taking several pictures at various settings and

then compare the pictures.

“Exposure compensation” (P. 48), “AE bracketing” (P. 49)

Basic function guides

Halfway

down:

All the way

down:

E-450_MASTER.fm Seite 31 Donnerstag, 16. April 2009 10:40 10

Shooting guides – Improving your shooting skills

Color – White balance

Besides sunlight, there are other sources for illuminating the subject, such as tungsten and

fluorescent lighting. These types of lighting contain particular colors; therefore, the same white

object shot under different lighting has slightly different colors. Even under the same sunlight,

the colors in the picture differ depending on the sky conditions, the shadows of trees or

buildings, and other factors. White balance automatically corrects the effects from these types

of lighting and enables shooting with the right colors. You can usually obtain the right colors

with the white balance set to

[AUTO]

. Depending on the shooting conditions, however, you may

not be able to obtain the intended colors. In this case, change the setting accordingly.

“Selecting the white balance” (P. 60)

This section describes the functions suitable under different shooting conditions depending on

the subject.

Taking landscape pictures

This section describes how to take outdoor scenery pictures of forests, lakes and beaches in

daylight.

Changing shooting mode

The proper shooting method varies depending on whether

you are trying to capture the silence of a still scene or the

dynamism of a motion scene.

•

To capture the depth of a forest, focus with a wider range of

the image. Use

(aperture priority shooting) mode and

close the aperture (increase the aperture value) as much

as possible.

•

To capture the waves crashing against the seashore, use

(shutter priority shooting) mode and select a fast shutter

speed. To capture a flowing waterfall or river, shoot using a

slow shutter speed.

Exposure compensation can be used even under different shooting modes. Check the image

that you have shot and use + or – to adjust the exposure to obtain better results.

A guide to functions for different subjects

Fluorescent light

Tungsten light Shade of tree

E-450_MASTER.fm Seite 32 Donnerstag, 16. April 2009 10:40 10

Shooting guides – Improving your shooting skills

Changing white balance

The color of water in pictures appears different depending on

whether it is a lake reflecting nearby trees or a seashore

surrounded by a coral reef. To capture the subtle difference

in color, try changing the white balance setting. Change the

setting for different situations, such as by using

[

5300K]

for sunny days and

[

7500K]

for outdoor shaded areas on

sunny days.

Changing metering mode

Depending on the depth of the water and the direction of the sun,

the brightness of the water can differ significantly in different areas

of the same composition. There is also a difference in the

brightness of forests depending on the way the trees overlap each

other. If you know which areas you want to emphasize the

compensation in the image composition, you can change the

metering mode. When set to

[

]

(Digital ESP metering), the

camera automatically assesses the brightness in the composition

and determines the exposure. To emphasize a specific partial

exposure in the composition, change the metering mode to

[

]

(center weighted metering) or

[

]

(spot metering), adjust the

metering area to the locations that you want to adjust the exposure

and then measure the exposure.

Changing saturation

There may be times when you cannot reproduce the desired color even when using white

balance or exposure compensation. In this case, you can change the

[SATURATION]

setting to

achieve the desired color. The

[SATURATION]

setting includes two levels of high and low

settings. When the setting is high, a vivid color is used.

“Aperture priority shooting” (P. 43), “Shutter priority shooting” (P. 44), “Changing the

metering mode” (P. 47), “Exposure compensation” (P. 48), “Selecting the white balance” (P. 60),

“[SATURATION] : Vividness of the color” (P. 64)

Taking flower pictures

The proper method for taking pictures of flowers differs depending on whether you want to

capture, for example, a single flower, a field of blooming flowers, a deep red rose, or the light

color of a sweet pea.

Changing white balance

There are many colors of flowers ranging from light to vivid

ones. Depending on the colors of the flowers, subtle color

shades may not be captured as seen. In this case, you can

check the light conditions and change the white balance

setting. At

[AUTO]

, the camera automatically determines the

type of light and shoots using the proper white balance.

However, you can bring out subtle color shades more

effectively by changing the setting according to shooting

conditions, such as by using

[

5300K]

for sunny days and

[

7500K]

for outdoor shaded areas on sunny days.

E-450_MASTER.fm Seite 33 Donnerstag, 16. April 2009 10:40 10

Shooting guides – Improving your shooting skills

Using exposure compensation

When shooting flowers against a background, select as

simple a background as possible to bring out the shape and

color of the flower. When shooting bright and whitish flowers,

adjust the exposure compensation to – (minus) so that the

flower stands out from the darker background.

Changing shooting mode

The proper shooting method when taking pictures of flowers differs

depending on whether you want to emphasize a single flower or

capture a field of flowers. To change the focus area, set the camera

(aperture priority shooting) mode and select the aperture value.

•

When you open the aperture (decrease the aperture value), the

camera focuses within a shorter range (with a shallow depth of

field), emphasizing the subject against a blurred background.

•

When you close the aperture (increase the aperture value), the

camera focuses over a wider range (with more depth of field),

producing a picture with both the foreground and background in

focus.

You can use the preview function to confirm the changes in the depth

of field when the aperture is changed.

Using live view

When using a conventional digital single-lens reflex camera with interchangeable lens system,

it was necessary to wait until after taking the picture to check the results of the exposure

compensation and white balance settings. With the live view function of this camera, however,

you can use the monitor to display and check the subject you want to capture.

Changing lenses

When the blooming flowers are few and sparse, take the picture using a telephoto lens. With a

telephoto lens, you take pictures in which subjects at different distances appear closer together,

giving the impression of a more densely blooming flower field. Using the telescopic feature of

the zoom lens also achieves the same effect, but it is easier to achieve this effect when the

focal length of the lens is longer, such as 150 mm or 200 mm, rather than 54 mm.

“Aperture priority shooting” (P. 43), “Using live view” (P. 36), “Exposure

compensation” (P. 48), “Selecting the white balance” (P. 60)

E-450_MASTER.fm Seite 34 Donnerstag, 16. April 2009 10:40 10

Shooting guides – Improving your shooting skills

Taking night scene pictures

There are different types of night scenes, from the afterglow of a sunset and city lights at night

to special light displays and firework displays.

Using a tripod

Because a slow shutter speed is needed to capture night

scenes, a tripod is required to prevent camera shake. If a

tripod is not available, you should place the camera on a

stable surface to prevent camera shake. Even if the camera

is secured, camera shake may occur when pressing the

shutter button. Therefore, it is recommended to use the

remote control or self timer.

Changing shooting mode

Night scenes have different levels of brightness, and the balance of the brightness in the

composition is not uniform. Start by using

(aperture priority shooting) mode to take the

picture. Set the aperture to the medium setting (about F8 or F11) and allow the camera to

automatically select the shutter speed. When shooting a night scene, because the camera sets

the exposure to match the dark areas which occupy a majority of the composition and the

image often turns out whitish (overexposed), adjust the exposure compensation to –1 or –1.5.

Use

[REC VIEW]

to check the image and adjust the aperture and exposure compensation as

necessary.

Image noise can easily occur when shooting at slow shutter speeds. In this case, set

[NOISE

REDUCT.]

[ON]

to reduce noise.

Using manual focus

In cases where you cannot use AF (auto focus) to focus on the

subject because the subject is too dark or you cannot focus in time

to take pictures, such as during a fireworks display, set the AF mode

[MF]

(manual focus) and focus manually. To take pictures of night

scenes, turn the focus ring of the lens and check whether you can

see the lights of the night scene clearly. To take pictures of a

fireworks display, adjust the focus of the lens to infinite unless you

are using a long focus lens. If you know the approximate distance to

the subject, it is recommended that you focus on something that is at

the same distance in advance.

“Program shooting” (P. 43), “Aperture priority shooting” (P. 43),

“Remote control shooting” (P. 57), “AF mode selection” (P. 51),

“Noise reduction” (P. 65), “REC VIEW” (P. 90)

E-450_MASTER.fm Seite 35 Donnerstag, 16. April 2009 10:40 10

Using live view

It is possible to use the LCD monitor as a viewfinder. You can view the exposure or white

balance effect and the subject’s composition while you take the picture.

Press the

button.

•

The mirror is raised and the subject is displayed on the LCD

monitor.

•

When

[AF MODE]

was set to

[C-AF]

, it will be set

automatically to

[S-AF]

(or

[S-AF+MF]

in case it was set to

[C-AF+MF]

Functions available during live view

The following functions can be used during live view.

Focusing during live view

•

Taking a picture after selecting the AF system

P. 3 7

•

Taking a picture using focus lock

P. 3 8

•

Taking a picture while adjusting the focus manually

P. 4 0

•

Taking a picture while focusing on a face

P. 3 9

•

Taking a picture while checking the focus by enlarging the zone to be focused

P. 4 1

Taking a picture while checking the effect

•

Taking a picture after comparing the effect of exposure compensation or white

balance

P. 4 1

•

Taking a panoramic picture

P. 4 2

Switching the indications on the LCD monitor

•

Turning off the information display/Displaying the histogram or ruled lines

P. 4 0

•

Checking the subject on the monitor even in low light situations

P. 8 7

Notes

•

If there is a high-intensity light source within the screen, the image may be displayed darker but

will be recorded normally.

•

If the live view function is used over a long period, the temperature of the image pickup device

rises causing images with high ISO sensitivity to appear noisy and unevenly colored. Either

lower the ISO sensitivity or turn off the camera for some time.

•

Exchanging the lens will cause live view to stop.

•

The following functions are not available during live view.

C-AF/AE lock/[AEL/AFL]

•

When

[IMAGER AF]

is selected, you cannot use the AF illuminator.

Activating live view

button

E-450_MASTER.fm Seite 36 Donnerstag, 16. April 2009 10:40 10

Using live view

The live view mechanism

During live view, the image on the LCD monitor is the same image received by the image pickup

device (Live MOS sensor/imager) that is used for shooting. This way you can check on the LCD

monitor the effects of exposure compensation or white balance. Moreover, you can also enlarge

part of the subject to focus on it or display ruled lines to check that the composition is level.

While the image appears on the LCD monitor during live view, the mirror is raised and the

shutter is open. Therefore, you will not be able to check the subject in the viewfinder.

Correct metering may not be possible if strong light is coming in through the viewfinder. In such

case attach the eyepiece cover.

“Eyepiece cover” (P. 56)

In live view you can choose one of 3 available AF systems. The

[LIVE VIEW AF MODE]

setting

will determine when and how focusing is performed.

Characteristics of the live view AF mode

For the latest information about Olympus lenses compatible with Imager AF, visit the Olympus

website. When you are using a lens that is not compatible with

[IMAGER AF]

[HYBRID AF]

will be

selected automatically.

Taking pictures using the viewfinder Taking pictures using live view

•

The light coming in through the lens

is reflected on the mirror and you can check the

subject in the viewfinder.

•

The mirror is raised and the shutter is open.

The image received by image pickup device

is displayed on the LCD monitor.

Taking a picture using live view



[

]



[

]



[LIVE VIEW AF MODE]

LIVE VIEW AF

MODE

Using the shutter button

Focus lock

Restrictions on

use

AREA

Halfway down

All the way

down

IMAGER AF

(factory default

setting)

AF operation

using the

imager

Shooting

Press the shutter button

halfway or press the

AEL/AFL

button.

* Only possible

with compatible

lenses.

11 AF

targets

AF SENSOR

AF operation

using the AF

sensor and

then shooting

While holding down the

AEL/AFL

button, press

the shutter button all the

way.

None

3 AF

targets

HYBRID AF

AF operation

using the

imager

(approximate

focus)

AF operation

using the AF

sensor and

then shooting

While holding down the

AEL/AFL

button, press

the shutter button all the

way.

None

3 AF

targets

Viewfinder

Image pickup

device

Shutter curtain

Mirror

Lens

E-450_MASTER.fm Seite 37 Donnerstag, 16. April 2009 10:40 10

Using live view

Taking a picture with [IMAGER AF]

Press the shutter button halfway.

•

When the focus is locked, the AF confirmation mark and

AF target mark light up.

Press the shutter button all the way to take a

picture.

Taking a picture with [AF SENSOR]

Press the shutter button all the way.

•

The mirror is lowered and the picture is taken after the

focus is locked.

•

The image that was displayed on the monitor before

lowering the mirror freezes during focusing.

•

If correct focus cannot be obtained, you will hear the sound

of the shutter but the picture will not be taken.

•

To focus in advance, hold down the

AEL

AFL

button and

press the shutter button. When the focus is locked, the AF

confirmation mark lights up. When the AF confirmation

mark is blinking, the focus is not locked.

Taking a picture with [HYBRID AF]

Press the shutter button halfway.

•

The Imager AF will be activated and you can check the

subject on the LCD monitor.

•

When the Imager AF achieves approximate focus, the

mark lights up.

Press the shutter button all the way.

•

The picture is taken in a similar way as when using

[AF SENSOR]

AF operation during live view

[IMAGER AF]

When you press the shutter button halfway, AF is performed by the image pickup device. 11

available AF targets allow you to focus on a subject even if it does not appear in the center of

the picture.

[AF SENSOR]

When you press the shutter button all the way, the AF is activated and the picture is taken in the

same way as when taking pictures using the viewfinder (AF is not activated on pressing the

shutter button halfway).

250250 F5.6F5.6

3 838

AF confirmation mark

AF target mark

250250 F5.6F5.6

3 838

AF confirmation mark

250250 F5.6F5.6

3 838

mark

E-450_MASTER.fm Seite 38 Donnerstag, 16. April 2009 10:40 10

Using live view

[HYBRID AF]

When you press the shutter button halfway, focusing is performed approximately by the Imager

AF and you can check the subject on the LCD monitor. When you press the shutter button all

the way, the AF is activated in the same way as with the

[AF SENSOR]

setting. The

approximate focusing distance is obtained when the shutter button is pressed halfway so the

time it takes to actually take the picture after pressing the shutter button all the way is

shortened. When using S-AF+MF, this is very convenient as you can hold the shutter button

pressed halfway and finely adjust the focus while checking the LCD monitor.

Camera status during AF

By setting

[

FACE DETECT]

[ON]

, the camera will detect people’s faces in the frame and

adjust the focus and metering automatically.

•

In order to use

[Fn FACE DETECT]

needs to be set up in the menu in advance.

“

FUNCTION” (P. 85)

•

After setting

[

FACE DETECT]

[ON]

while using

, the following functions are

automatically set to the best settings for taking pictures of people.

Imager AF AF Sensor

•

AF is performed by the image pickup device.

•

The mirror is lowered and AF is performed by the

AF sensor. (The mirror is down so the image

display on the monitor freezes just before pressing

the shutter button all the way.)

Using the face detection function

Direct button

(The setting changes each time the button is pressed.)

Super control panel

ip

[

FACE DETECT]



[

]



[

]



[

FACE DETECT]



[ON]

Function Setting Ref. page

METERING

P. 4 7

GRADATION AUTO P. 64

LIVE VIEW AF MODE IMAGER AF P. 37

AF MODE S-AF (

)P.51

Halfway down

All the way down

AF Sensor

E-450_MASTER.fm Seite 39 Donnerstag, 16. April 2009 10:40 10

Using live view

If the camera detects a face, a frame will be

displayed in that location.

•

When you press the shutter button, the camera will focus

on the position of the face detection frame (however, if a

single AF target is selected with

[AF AREA]

, the camera

will focus on the AF target selected).

•

With

[AF SENSOR]

[HYBRID AF]

, the camera will

focus on the AF target that is closest to the face detection

frame.

Notes

•

During sequential shooting, face detection will work only at the first shot.

•

Depending on the subject, the camera may not be able to correctly detect the face.

During live view, you can take a picture focusing manually while checking the focus on the LCD

monitor.

Set the AF mode to [S-AF+MF] or [MF].

“AF mode selection” (P. 51)

Adjust the focus by rotating the focus ring.

•

[S-AF+MF]

mode, after pressing the shutter button halfway or pressing the

AEL

AFL

button,

you can rotate the focus ring to finely adjust the focus before taking the picture.

•

Using the enlarged display can be very convenient when adjusting the focus manually.

“Enlarged display operation” (P. 41)

You can switch the information displayed on the monitor by pressing

INFO

button repeatedly.

Taking a picture using manual focus

Switching the information display

250250 F5.6F5.6

3 838

250

250250

F5.6

3 8

250250 F5.6F5.6

3 838

250

F5.6

3 8

250

F5.6

3 8

Information display

Information display on

+ Ruled lines display

(

P. 8 7 )

Information display on

+ Histogram

Enlarged display

(

P. 4 1 )

Information display

off

GOWB

+0.7+0.7 +1.0+1.0

0.00.0 +0.3+0.3

Comparison screen

(

P. 4 1 )

E-450_MASTER.fm Seite 40 Donnerstag, 16. April 2009 10:40 10

Using live view

You can check the effect of exposure compensation or white balance on a 4-split screen.

Press the INFO button repeatedly to display the

comparison screen.

“Switching the information display” (P. 40)

•

The exposure compensation comparison screen is

displayed. Press

to switch to the white balance

comparison screen. Press

to switch the screen.

Use

or the control dial to select the setting

value, then press the

button.

•

You can take the picture using the set value.

Notes

•

Exposure compensation is not available in

mode.

•

This function cannot be used in

mode.

It is possible to enlarge the subject for display. Enlarging the image during MF makes focus

confirmation and adjustment easier.

Press the

INFO

button repeatedly to display the enlarged display.

“Switching the information display” (P. 40)

•

The enlargement frame will be displayed.

Use

to move the frame and press the

button.

•

The area inside the frame is enlarged and displayed.

•

Press and hold the

button to return the enlargement frame to the center after it was moved.

Turn the control dial to change the magnification (7x/10x).

•

Taking the picture or pressing the

button will cancel the enlarged display.

•

During enlarged display, AF will not be activated even in the shutter button is pressed all the

way. You can take the picture after checking the focus in the enlarged display.

Taking a picture while comparing the effect

Enlarged display operation

GOWB

+0.7+0.7 +1.0+1.0

0.00.0 +0.3+0.3

250

F5.6

3 8

button

E-450_MASTER.fm Seite 41 Donnerstag, 16. April 2009 10:40 10

Using live view

You can enjoy panorama shooting easily using the OLYMPUS xD-Picture Card. Using

OLYMPUS Master (provided CD-ROM) to join a few images shot where the subject’s edges

overlap, you can create a single panorama composite image.

Panorama shooting is possible up to a maximum of 10 images.

•

Try your best to include the common parts of the overlapping images when shooting the

subject.

Set the mode.

“Setting the art filter/scene” (P. 5)

•

Live view is activated.

Use

to specify the direction for joining, then shoot the

subject with the edges overlapping.

: Joins the next image to the right.

: Joins the next image to the left.

: Joins the next image to the top.

: Joins the next image to the bottom.

•

Shoot while changing the composition such that the subject overlaps.

•

The focus, exposure, etc. will be determined at the first shot.

•

The

(warning) mark will be displayed after you have finished taking 10 shots.

•

Pressing the

button before shooting the first frame returns to the scene mode selection

menu.

•

Pressing the

button in the midst of shooting ends the sequence of panorama shooting,

and allows you to continue with the next one.

Notes

•

Panorama shooting cannot be done if the OLYMPUS xD-Picture Card is not loaded in the

camera.

•

During panorama shooting, the image previously taken for position alignment will not be

retained. With the frames or other markers for display in the images as a guide, set the

composition such that the edges of the overlapping images overlap within the frames.

Panorama shooting

250

250250

F5.6

3 8

[

]

[

]

[

]

[

]

EXIT

E-450_MASTER.fm Seite 42 Donnerstag, 16. April 2009 10:40 10

Exposure

The camera sets the optimum aperture value and shutter speed automatically according to the

subject brightness.

Set the mode dial to

•

When the shutter button is half-pressed, the shutter speed and

aperture value are displayed on the viewfinder. Releasing the shutter

button displays the shutter speed and aperture value on the super

control panel screen.

Program shift (

)

By turning the control dial in the

mode, you can change the combination of

aperture and shutter speed while maintaining the optimum exposure.

“Program line diagram (

mode)” (P. 118)

•

The program shift setting will not be canceled after shooting. To cancel program

shift setting, turn the control dial until the shooting mode indication

on the

viewfinder or super control panel changes to

or turn off the power.

•

Program shift is not available when you are using a flash.

The shutter speed and aperture value are blinking:

The optimum exposure cannot be obtained. For details, see “Exposure warning

display” (

P. 118).

The camera sets the optimum shutter speed automatically for the aperture value you have

selected. When you open the aperture (decrease the aperture value), the camera will focus

within a shorter range (shallow depth of field) and produce a picture with a blurred background.

When you close the aperture (increase the aperture value), the camera will focus within a

longer range. Use this mode when you wish to add changes to the background representation.

Before shooting, you can use the preview function to check how the background will look in

your picture.

“Preview function” (P. 46)

Program shooting



TIPS

Aperture priority shooting

250 F5.6

2008. 08.16

arge

Normal

OFF

Shooting mode

Shutter speed

Aperture value

Super Control panel

Viewfinder

AF confirmation mark

Program shift

E-450_MASTER.fm Seite 43 Donnerstag, 16. April 2009 10:40 10

Exposure

Set the mode dial to

and turn the control dial to set the aperture value.

To check the depth of field with the selected aperture value:

See “Preview function” (

P. 46).

Shutter speed is blinking:

The optimum exposure cannot be obtained. For details, see “Exposure warning

display” (

P. 118).

The camera sets the optimum aperture value automatically for the shutter speed you have

selected. Set the shutter speed depending on the type of effect you want. A higher shutter

speed allows you to capture a fast-moving subject without blur, and a slower shutter speed

blurs a moving subject, creating a feeling of speed or motion.

Set the mode dial to

and turn the control dial to set the shutter speed.



TIPS

Shutter priority shooting

When the aperture

value (f-number) is

decreased

When the aperture

value (f-number) is

increased

Viewfinder

Aperture value

Shutter speed

AF confirmation

mark

Shooting mode

Open the aperture (f-number is decreased)

Close the aperture (f-number is increased)

A fast shutter

speed can freeze

a fast action

scene without any

blur.

A slow shutter

speed will blur a

fast action scene.

This blurring will

give the

impression of

dynamic motion.

Viewfinder

Aperture value

Shutter speed

AF confirmation

mark

Shooting mode

Slower shutter speed

Faster shutter speed

E-450_MASTER.fm Seite 44 Donnerstag, 16. April 2009 10:40 10

Exposure

The picture looks blurred:

The possibility of camera shake spoiling your picture increases greatly during macro or ultra-

telephoto shooting. Raise the shutter speed or use a monopod or tripod to stabilize the camera.

The aperture value is blinking:

The optimum exposure cannot be obtained. For details, see “Exposure warning

display” (

P. 118).

Allows you to set the aperture and shutter speed manually. You can check how much it differs

from the appropriate exposure by using the exposure level indicator. This mode gives you more

creative control, allowing you to make whatever settings you like, regardless of the correct

exposure.

Set the mode dial to

and turn the control dial to set the value.

Shutter speed: Turn the control dial to set the value.

Aperture value:Turn the control dial while holding down the

button

to set the value.

•

The range of aperture values available varies with the lens type.

•

The shutter speed can be set to 1/4000–60 sec. or

[BULB]

•

The aperture value and shutter speed change in 1/3EV increments as

the dial is turned.

•

mode the exposure level indicator will appear on the super control panel screen. It shows

the difference (ranging from –3EV to +3EV) between the exposure value calculated by the

currently selected aperture and shutter speed and the exposure value considered optimum by

the camera. If the difference exceeds ±3EV,

will appear in red on both sides of the

indicator.



TIPS

Manual shooting

Open the aperture (f-number is decreased)

Slower shutter speed

Close the aperture (f-number is increased)

Faster shutter speed

button

Underexposure

Optimum exposure

Overexposure

250 F5.6

-0.3

2008. 08.16

arge

Normal

OFF

Exposure level indicator

E-450_MASTER.fm Seite 45 Donnerstag, 16. April 2009 10:40 10

Exposure

Noise in images

During shooting at slow shutter speeds, noise may appear on-screen. These phenomena are

caused when current is generated in those sections of the image pickup device that are not

normally exposed to light, resulting in a rise in temperature in the image pickup device or image

pickup device drive circuit. This can also occur when shooting with a high ISO setting in a high-

temperature environment. To reduce this noise, the camera activates the noise reduction

function.

“Noise reduction” (P. 65)

The picture looks blurred:

The use of a monopod or tripod is recommended when taking a picture at slow shutter speed.

To switch the operation between setting the shutter speed and aperture value:

You can set the aperture value using only the control dial.

“DIAL FUNCTION” (P. 83)

Notes

•

Exposure compensation is not available in

mode.

Bulb shooting

You can take a picture with a bulb exposure time in which the shutter stays open as long as you

hold down the shutter button.

Bulb shooting can also be done using an optional remote control (RM-1).

“Bulb shooting

with the remote control” (P. 58)

mode, set the shutter speed to [BULB].

•

[buLb]

is displayed in the viewfinder and

[BULB]

on the super control panel.

To automatically end bulb shooting after a specified period of time:

You can set the maximum time for bulb shooting.

“BULB TIMER” (P. 87)

To fix the focus during manual focus shooting:

You can fix the focus so the focus does not change even if the focus ring is turned during exposure.

“BULB FOCUSING” (P. 83)

Notes

•

The following functions are not available during bulb shooting.

Sequential shooing/self-timer shooting/AE bracket shooting

The viewfinder shows the focused area (depth of field) with the selected aperture value.

For the preview function to work by pressing the

button, it is necessary to set the function of

the

button on the menu beforehand.

“

FUNCTION” (P. 85)

Press the

button to use the preview function.

•

When

[

FUNCTION]

is assigned to

[LIVE PREVIEW]

pressing the

button automatically switches the camera to live

view for a preview of the picture on the monitor.



TIPS



TIPS

Preview function

button

E-450_MASTER.fm Seite 46 Donnerstag, 16. April 2009 10:40 10

Exposure

There are 5 ways to measure the subject brightness: Digital ESP metering, Center weighted

averaging metering, and 3 types of spot metering. Select the most suitable mode for the

shooting conditions.

Setting display

Digital ESP metering

The camera measures the light levels and calculates the light

level differences in 49 separate areas of the image. This mode is

recommended for general use. Setting the AF synchronized function to

[ESP+AF]

enables metering

centered around the AF target that is in focus with AF.

Center weighted averaging metering

This metering mode provides the average metering between the subject

and the background lighting, placing more weight on the subject at the

center. Use this mode when you do not want the light level of the

background to affect the exposure value.

Spot metering

The camera meters a very small area around the center of the subject,

defined by the spot metering area mark in the viewfinder. Use this mode

when there is very strong backlight.

HI Spot metering – highlight control

When the overall background is bright, white areas of the image will

come out gray if you use the camera’s automatic exposure. Using this

mode enables the camera to shift to over-exposure, allowing accurate

white reproduction. Metering area is the same as spot metering.

SH Spot metering – shadow control

When the overall background is dark, black areas of the image will come out gray if you use the

camera’s automatic exposure. Using this mode enables the camera to shift to under-exposure,

allowing accurate black reproduction. Metering area is the same as spot metering.

Changing the metering mode

Super control panel

ip

: [METERING]



[

]



[METERING]

arge

Normal

OFF

METERING

button

Viewfinder

: Center weighted averaging metering

: Spot metering

: Spot metering – highlight control

: Spot metering – shadow control

: Metering area

E-450_MASTER.fm Seite 47 Donnerstag, 16. April 2009 10:40 10

Exposure

In some situations, you may get better results if you manually compensate (adjust) the

exposure value set automatically by the camera. In many cases, bright subjects (such as snow)

will turn out darker than their natural colors. Adjusting toward + makes these subjects closer to

their real shades. For the same reason, adjust toward – when shooting dark subjects. The

exposure can be adjusted in a range of ±5.0EV.

•

The EV step interval is 1/3EV.

•

The exposure compensation indicator is displayed. The

exposure compensation indicator will not be displayed

when the exposure is compensated by 0.

•

If the exposure compensation value exceeds the scale of

the exposure compensation indicator, a red

displayed on the left and right edges of the indicator.

To adjust the exposure compensation using only the control dial:

You can set the exposure compensation value without pressing

button.

“DIAL FUNCTION” (P. 83)

Notes

•

Exposure compensation is not available in

and

modes.

Exposure compensation

Direct button



TIPS

–2.0EV

±0 +2.0EV

Adjust toward –

Adjust toward +

button

Viewfinder

Exposure compensation value

+2.0

2008. 08.16

arge

Normal

OFF

Exposure compensation indicator

1/3EV

E-450_MASTER.fm Seite 48 Donnerstag, 16. April 2009 10:40 10

Exposure

The metered exposure value can be locked with the

AEL

AFL

button (AE lock). Use AE lock

when you want a different exposure setting from the one that would normally apply under the

current shooting conditions.

Normally, pressing the shutter button halfway locks both AF (auto focus) and AE (automatic

exposure), but you can lock the exposure alone by pressing the

AEL

AFL

button.

Press the

AEL

AFL

button at the position where you wish

to lock the metering values and the exposure will be locked.

The exposure is locked while the

AEL

AFL

button is

pressed. Now press the shutter button.

•

Releasing the

AEL

AFL

button cancels AE lock.

To lock the exposure:

You can lock the metering result so that it is not canceled when

the

AEL

AFL

button is released.

“AEL/AFL MEMO” (P. 85)

To activate AE lock with a set metering mode:

You can set the metering mode for locking the exposure with the

AE lock.

“AEL Metering” (P. 87)

The camera automatically shoots a number of pictures at different exposure values for each

frame. Even in conditions where correct exposure is difficult to obtain (such as a backlit subject

or a scene at dusk), you can pick the picture you prefer from a selected number of frames with

a variety of different exposure settings. The pictures are taken in the following order: Picture

with optimum exposure, picture adjusted in – direction, and picture adjusted in + direction.

Compensation value: 0.3, 0.7 or 1.0

Number of frames: 3

AE lock



TIPS

AE bracketing

AEL

AFL

button

Viewfinder

AE lock

e.g.) When BKT is set to

[3F 1.0EV]

–1.0EV +1.0EV±0

E-450_MASTER.fm Seite 49 Donnerstag, 16. April 2009 10:40 10

Exposure

Start shooting.

•

In single-frame shooting, the exposure changes every time

the shutter button is pressed.

•

In sequential shooting, hold down the shutter button until

the selected number of frames are taken.

•

Releasing the shutter button stops auto bracketing

shooting. When it stops,

is displayed in green on the

super control panel.

How AE bracketing compensates exposure in each shooting mode

Depending on the selected shooting mode, exposure is compensated in the following way:

mode : Aperture value and shutter speed

mode : Shutter speed

mode : Aperture value

mode : Shutter speed

To apply AE bracketing to the exposure value you have compensated:

Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to

the exposure value you have compensated.

The higher the ISO value, the greater the camera’s light sensitivity and the better its ability to

shoot in low light conditions. However, higher values may give pictures a grainy appearance.

[AUTO]

: The sensitivity is set automatically according

to the shooting conditions. With the

[ISO-

AUTO SET]

setting, you can set the maximum

ISO that is set automatically.

“ISO-AUTO SET” (P. 87)

[100–1600]

: Fixed ISO sensitivity.

To automatically set the optimal ISO in

mode:

Normally, the AUTO setting is not available in

mode, but you can set it for use in all shooting

modes.

“ISO-AUTO” (P. 87)



[

]



[AE BKT]



TIPS

ISO sensitivity setting

Super control panel

ip

: [ISO]



[

]



[ISO]



TIPS

CANCEL

AE BKT

SELECT

AE BKT

3F 0.7EV

3F 0.3EV

3F 1.0EV

OFF

Viewfinder

The exposure

value for the next

shot is displayed

during shooting.

arge

Normal

OFF

ISO

E-450_MASTER.fm Seite 50 Donnerstag, 16. April 2009 10:40 10

Focusing and shooting functions

The three focus modes S-AF, C-AF, and MF are available with this camera.

You can take pictures by combining S-AF or C-AF mode with MF mode.

S-AF (single AF)

Focusing is performed once when the shutter button is pressed halfway.

If focusing fails, release your finger from the shutter button and press it halfway again. This

mode is suitable for taking pictures of still subjects or subjects with limited movement.

Press the shutter button halfway.

•

When the focus is locked, the AF confirmation mark lights up.

•

A beep sound is output when the subject is in focus.

When it is difficult to focus in the AF mode in low-light conditions:

The built-in flash can function as an AF illuminator. This helps with focusing in low-light conditions

in the AF mode.

“AF ILLUMINAT.” (P. 83)

AF mode selection

Super control panel

ip

: [AF MODE]



[

]



[AF MODE]



TIPS

arge

Normal

OFF

AF MODE

button

AF confirmation

mark

Viewfinder

E-450_MASTER.fm Seite 51 Donnerstag, 16. April 2009 10:40 10

Focusing and shooting functions

C-AF (continuous AF)

The camera repeats focusing while the shutter button remains pressed halfway. When the

subject is in motion, the camera focuses on the subject in anticipation of its movement

(Predictive AF). Even if the subject moves or you change the composition of the picture, the

camera continues trying to focus.

Press the shutter button halfway and keep it in this position.

•

When the subject is in focus and locked, the AF confirmation mark lights up.

•

The AF target does not light up, even when the subject is in focus.

•

The camera repeats focusing. Even if the subject moves or even if you change the

composition of the picture, focusing is tried continuously.

•

A beep sound is output when the subject is in focus. The beep sound is not output after the

third continuous AF operation, even when the subject is in focus.

MF (manual focus)

This function allows you to manually focus on any subject.

Adjust the focus using the focus ring.

To change the rotational direction of the focus ring:

You can select the rotational direction of the focus ring to suit your preference for how the lens

adjusts to the focusing point.

“FOCUS RING” (P. 83)

For information on whether the subject is in focus (Focus aid):

When you focus the lens on a subject manually (by turning the focus ring), the AF confirmation

mark lights. When

is set with

[AF AREA]

, AF confirmation lights up if the subject is in focus at

the center AF target.

Simultaneous use of S-AF mode and MF mode (S-AF+MF)

This function allows you to fine-adjust the focus manually by turning the focus ring after AF is

performed in the S-AF mode. When the shutter button is not pressed, MF operation is available.

•

You can fine-adjust the focus with the focus ring if you have pressed the shutter button

halfway and AF is confirmed.

Notes

•

If the shutter button is pressed again after fine-adjusting the focus with the focus ring, the AF is

activated and your adjustments are canceled.



TIPS

)

Near

Focus ring

E-450_MASTER.fm Seite 52 Donnerstag, 16. April 2009 10:40 10

Focusing and shooting functions

Simultaneous use of C-AF mode and MF mode (C-AF+MF)

Focus with the focus ring and press the shutter button halfway to activate C-AF mode.

•

While the shutter button is kept pressed, MF cannot be used.

•

When the shutter button is not pressed, focusing with MF is possible.

Another way to adjust focus manually in C-AF mode:

You can set the

AEL

AFL

button to operate C-AF.

“AEL/AFL” (P. 84)

Notes

•

If the shutter button is pressed again after fine-adjusting the focus with the focus ring, the AF is

activated and your adjustments are canceled.

This camera has 3 AF targets for focusing on the subject with auto focus. You can select only

one of the AF targets.

When

[LIVE VIEW AF MODE]

is set to

[IMAGER AF]

, 11 AF targets will be available during live

view.

“Taking a picture using live view” (P. 37)

[AUTO]

Focuses using the 3 AF targets.

Focuses using the left AF target.

Focuses using the center AF target.

Focuses using the right AF target.

•

With the

[IMAGER AF]

setting, target selection is only

possible using the super control panel. Turn the control

dial to select the AF target.



TIPS

AF target selection

Super control panel

ip

: [AF AREA]



[

]



[AF AREA]

Viewfinder

Center AF target

Left AF target

Right AF target

arge

Normal

OFF

AF AREA

button

250250 F5.6F5.6

When selecting the AF target with

the

[IMAGER AF]

setting

E-450_MASTER.fm Seite 53 Donnerstag, 16. April 2009 10:40 10

Focusing and shooting functions

The camera’s auto focus may not be able to focus on the subject in situations such as when the

subject is not in the center of the frame. If this happens, the easiest solution is to use focus

lock. Use this when composing the subject outside of the AF targets or when the subject is

difficult to focus on.

Adjust the AF target with the subject to be

focused and press the shutter button

halfway until the AF confirmation mark

lights up.

•

The focus is locked. The AF confirmation mark

and the AF target in focus light up in the

viewfinder.

•

If the AF confirmation mark blinks, press the

shutter button halfway again.

•

While the shutter button is being pressed, the

super control panel disappears.

While pressing the shutter button halfway,

move to the desired composition and press

the button all the way.

•

The card access lamp blinks while the picture is

being stored on the card.

If the subject has lower contrast than its surroundings

If the contrast of the subject is weak, such as when the lighting is insufficient or the subject

cannot be seen clearly because of fog, the focus may not be achieved. Focus (focus lock) on a

high-contrast object the same distance away as the intended subject, recompose your shot and

then take the picture.

Focus lock – If correct focus cannot be obtained

Card access

lamp

Shutter button

e.g.) The camera focuses using the

center AF target.

AF target

AF confirmation

mark

E-450_MASTER.fm Seite 54 Donnerstag, 16. April 2009 10:40 10

Focusing and shooting functions

Single-frame shooting

Shoots 1 frame at a time when the shutter button is pressed

(normal shooting mode).

Sequential shooting

Shoots at 3.5 frames/sec. for as long as the shutter button is

pressed (during JPEG).

•

Press the shutter button fully and keep it pressed. The camera will take pictures in sequence

until you release the button.

•

Focus, exposure, and white balance are locked at the first frame (during S-AF, MF).

Notes

•

During sequential shooting, if the battery check blinks due to low battery, the camera stops

shooting and starts saving the pictures you have taken on the card. The camera may not save

all of the pictures depending on how much battery power remains.

Setting method

Setting display

•

Anti-shock display (

P. 58):

The

symbol displayed next to the icon on the super

control panel indicates that anti-shock is activated.

Sequential shooting

Direct button

jj

Super control panel

ip

: [

]

SELECT GO

button

Single-frame shooting

Sequential shooting

Single-frame shooting/

Sequential shooting

Self-timer

12-second self-timer

2-second self-timer

Remote control

0 second

2 seconds

E-450_MASTER.fm Seite 55 Donnerstag, 16. April 2009 10:40 10

Focusing and shooting functions

This function lets you take pictures using the self-timer. You can set the camera to release the

shutter after either 12 or 2 seconds. Fix the camera securely on a tripod for self-timer shooting.

For the setting method, see “Sequential shooting” (

P. 55).

Press the shutter button all the way.

•

When

12s

is selected:

First, the self-timer lamp lights up for

approximately 10 seconds, then it blinks for

approximately 2 seconds and the picture is taken.

•

When

is selected:

The self-timer lamp blinks for approximately

2 seconds, and then the picture is taken.

•

To cancel the activated self-timer, press the

button.

Notes

•

Do not press the shutter button while standing in front of the camera; this could result in the

subject being out of focus since focusing is performed when the shutter button is pressed

halfway.

Eyepiece cover

When shooting without looking through the viewfinder, attach the eyepiece cover to the

viewfinder to prevent the light entering the viewfinder from changing the exposure. Attach the

eyepiece cover after removing the eyecup as illustrated. The same applies when replacing with

an optional eyecup.

Self-timer shooting

Self-timer lamp

Eyecup

Eyepiece cover

E-450_MASTER.fm Seite 56 Donnerstag, 16. April 2009 10:40 10

Focusing and shooting functions

By using the optional remote control (RM-1), you can take a picture with yourself in it or a night

scene without touching the camera.

The camera can be set to release the shutter either right away or 2 seconds after the shutter

button on the remote control is pressed. Bulb shooting is also possible when using the optional

remote control.

For the setting method, see “Sequential shooting” (

P. 55).

Mount the camera securely on a tripod, point the

remote control at the remote control receiver on the

camera and press the shutter button on the remote

control.

•

When

is selected:

The focus and exposure are locked, the remote

control lamp blinks and the picture is taken.

•

When

is selected:

The focus and exposure are locked, the remote

control lamp blinks, and after approximately

2 seconds the picture is taken.

Transmitted signal effective area

Point the remote control at the remote control receiver of the camera within the effective area

as shown below.

When powerful lighting such as direct sunlight is shining on the remote control receiver, or

when fluorescent light or devices emitting electrical or radio waves are nearby, it could narrow

the effective area.

The remote control lamp does not blink after the shutter button on the remote control is

pressed:

The transmitted signal may not be effective if the remote control receiver is exposed to powerful

lighting. Move the remote control closer to the camera and press the shutter button on the remote

control again.

The transmitted signal may not be effective if the remote control is too far from the camera. Move

the remote control closer to the camera and press the shutter button on the remote control again.

There is signal interference. Point the remote control toward the remote control receiver on the

camera and press and hold down the CH button and the W or T zoom button on the remote control

at the same time for at least three seconds until the remote control lamp on the camera blinks or a

beep sound can be heard, indicating that the signal has been received.

To cancel the remote control shooting mode:

The remote control shooting mode will not be canceled after shooting. Press the

button to

set to

[

]

(single-frame shooting), etc.

To use the shutter button on the camera in the remote control shooting mode:

The shutter button on the camera still works even in the remote control shooting mode.

Remote control shooting



TIPS

Remote control lamp

Remote control receiver

Remote control

Remote control receiver

Approx. 5 m (16.4 ft.) (indoor)

Approx. 3 m (9.8 ft.) (outdoor)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

E-450_MASTER.fm Seite 57 Donnerstag, 16. April 2009 10:40 10

Focusing and shooting functions

Notes

•

The shutter will not be released if the subject is not in focus.

•

Under bright light conditions, the remote control lamp may be difficult to see, making it hard to

determine whether or not the picture has been taken.

•

Zoom is not available on the remote control.

Bulb shooting with the remote control

Set the mode dial to

, then set the shutter speed to

[BULB]

“Bulb shooting” (P. 46)

You can select the interval from the time the mirror is raised until the shutter is released. This

diminishes camera shake caused by vibrations when the mirror moves. This feature can be

useful in astrophotography and microscope photography or other photographic situations

where a very slow shutter speed is used, and camera vibration needs to be kept to a minimum.



[

]



[ANTI-SHOCK

]

Select the time delay after the mirror is raised and until the shutter is released from

1 to 30 seconds and press the

button.

Anti-shock is added to the shooting functions individually (single-frame shooting,

sequential shooting, self-timer shooting, and remote control shooting). For the

setting method, see “Sequential shooting” (

P. 5 5 ) .

Anti-shock

Press the W button on the remote

control to open the shutter.

When the time set in “BULB

TIMER” (

P. 87) elapses, the

shutter closes automatically.

Press the T button to close the

shutter.

E-450_MASTER.fm Seite 58 Donnerstag, 16. April 2009 10:40 10

Record mode, white balance, and picture mode

You can select a record mode in which to take pictures. Choose the record mode that is best for

your purpose (printing, editing on a PC, website editing, etc.).

Recording formats

JPEG

For JPEG images, select a combination of image size (

) and compression rate (SF, F,

N, B). An image consists of pixels (dots). When you enlarge an image with a low pixel count, it

will be displayed as a mosaic. If an image has a high pixel count, the file size (amount of data)

will be larger and the number of storable still pictures will be lower. The higher the compression,

the smaller the file size. However, the image will have less clarity when played back.

RAW

This is unprocessed data that has not undergone changes in white balance, sharpness,

contrast or color. To display as an image on the computer, use OLYMPUS Master. RAW data

cannot be displayed on a different camera or by using common software, and it cannot be

selected for print reservation.

It is possible to edit images taken with the record mode set to RAW data using this camera.

“Editing still images” (P. 78)

Selecting the record mode

Image becomes clearer

Application

Number of

pixels

Pixel

count

Compression rate

SF (Super

Fine)

1/2.7

F (Fine)

1/4

N (Normal)

1/8

B (Basic)

1/12

Select for the

print size

(Large) 3648 x 2736

(Middle)

3200 x 2400

B2560 x 1920

1600 x 1200

(Small)

1280 x 960

1024 x 768

For

small-sized

prints and use

on a web site

640 x 480

Image with a high pixel count

Image with a low pixel count

Number of pixels increases

E-450_MASTER.fm Seite 59 Donnerstag, 16. April 2009 10:40 10

Record mode, white balance, and picture mode

Selecting the record mode

JPEG

For JPEG, you can register 4 combinations of images sizes (

) and compression rates

(SF, F, N, B) from the 12 total combinations available.

“

SET” (P. 88)

When you select the

image size, you can further select the pixel size.

“PIXEL COUNT” (P. 88)

RAW+JPEG

Records both a JPEG and RAW image at the same time each time you take a picture.

RAW

Records the image in RAW data format.

e.g.) The following 9 record modes are available when

N are registered

RAW : RAW

JPEG :

RAW+JPEG : RAW+

F/RAW+

N/RAW+

To find out the file size/number of storable still pictures

for each record mode:

“Record mode and file size/number of storable still

pictures” (

P. 121)

Color reproduction differs depending on the light conditions. For instance, when daylight or

tungsten lighting is reflected on white paper, the shade of white produced will be slightly

different for each. With a digital camera, white color can be adjusted to reproduce more natural

white with a digital processor. This is called white balance. There are 4 options for setting the

WB with this camera.

Auto white balance [AUTO]

This function enables the camera to automatically detect white in images and adjust the color

balance accordingly. Use this mode for general use.

Preset white balance [

] [

]

8 different color temperatures are programmed on this camera covering a variety of indoor and

outdoor lighting including fluorescent lights, light bulbs, and flashes. For example, use preset

WB when you want to reproduce more red in the picture of a sunset, or capture a warmer

artistic effect under artificial lighting.

Super control panel

ip

: [

]



[

]



[

]



TIPS

Selecting the white balance

arge

Normal

OFF

CARD SETUP

CUSTOM RESET

PICTURE MODE

GRADATION

CANCEL SELECT

RAW

E-450_MASTER.fm Seite 60 Donnerstag, 16. April 2009 10:40 10

Record mode, white balance, and picture mode

Custom white balance [CWB]

You can set the color temperature from 2000K to 14000K. For details on color temperature,

refer to “White balance color temperature” (

P. 120).

“Setting the auto/preset/custom white balance” (P. 61)

One-touch white balance [

]

You can set the optimum white balance for the shooting conditions by pointing the camera at a

white object like a sheet of white paper. The white balance achieved with this setting is saved

as one of the preset WB settings.

“Setting the one-touch white balance” (P. 63)

Setting the auto/preset/custom white balance

You can adjust the white balance by selecting the appropriate color temperature for the light

conditions.

•

Custom white balance is set by selecting

[CWB]

and

turning the control dial while pressing down the

button.

WB mode Light conditions

AUTO

Used for most light conditions (when there is a white portion framed in the

viewfinder). Use this mode for general use.

5300K

For shooting outdoors on a clear day, or to capture the reds in a sunset or the

colors in a fireworks display

7500K

For shooting outdoors in the shadows on a clear day

6000K

For shooting outdoors on a cloudy day

3000K

For shooting under a tungsten light

4000K

For shooting under white fluorescent lighting

4500K

For shooting under a neutral white fluorescent lamp

6600K

For shooting under a daylight fluorescent lamp

5500K

For flash shooting

Color temperature set by one-touch WB.

“Setting the one-touch white balance” (P. 63)

CWB

Color temperature set in custom white balance menu. This can be set from 2000K

to 14000K. When the value has not been set, it is set to 5400K.

Super control panel

ip

: [WB]



[

]



[WB]

button

E-450_MASTER.fm Seite 61 Donnerstag, 16. April 2009 10:40 10

Record mode, white balance, and picture mode

Setting display

When subjects that are not white appear white:

In the auto WB setting, if there is no near-white color in the image framed in the screen, the white

balance will not be correctly determined. In such a case, try preset WB or one-touch WB settings.

WB compensation

This function lets you make fine changes to the auto WB and preset WB settings.

•

Select the white balance to adjust and press

Adjusting the white balance in the A direction (Amber-

Blue)

Depending on the original WB conditions, the image will

become more amber when adjusted toward +, and bluer

when adjusted toward –.

Adjusting the white balance in the G direction (Green-

Magenta)

Depending on the original WB conditions, the image will

become greener when adjusted toward +, and magenta

when adjusted toward –.

•

The white balance can be adjusted in 7 increments in each direction.

Checking the white balance you have adjusted:

After setting the compensation value, point the camera at the subject to take test shots. When the

AEL

AFL

button is pressed, sample images that have been taken with the current WB settings are

displayed.

Adjusting all WB mode settings at once:

See “ALL

”(

P. 8 8 ) .



TIPS

Super control panel

ip

: [

]



[

]



[WB]



TIPS

arge

Normal

OFF

Viewfinder

Not displayed when WB is set to AUTO.

–

AUTO

CANCEL SELECT

WB PREVIEW

AEL

AFL

E-450_MASTER.fm Seite 62 Donnerstag, 16. April 2009 10:40 10

Record mode, white balance, and picture mode

Setting the one-touch white balance

This function is useful when you need a more precise white balance than preset WB can

provide. Point the camera at a sheet of white paper under the light source you want to use to

determine the white balance. The optimum white balance for the current shooting conditions

can be saved in the camera. This is useful when shooting a subject under natural light, as well

as under various light sources with different color temperatures.

Set

[

FUNCTION]

[

]

beforehand. (

P. 8 5 )

Point the camera at a sheet of white paper.

•

Position the paper so that it fills the viewfinder. Make sure there are no shadows.

While holding down the

button, press the shutter

button.

•

The one-touch white balance screen appears.

Select [YES] and press the

button.

•

The white balance is registered.

•

The registered white balance will be stored in the camera as a

preset WB setting. Turning the power off does not erase the

data.

After pressing the shutter button, [WB NG RETRY] is displayed:

When there is not enough white in the image, or when the image is too bright, too dark or the colors

look unnatural, you cannot register the white balance. Change the aperture and shutter speed

settings, then repeat the procedure from Step 1.

You can select image tone to create unique image effects. You can also fine-adjust image

parameters such as contrast and sharpness for each mode. The adjusted parameters are

recorded in each picture effect mode.

[

VIVID]

: Produces vivid colors.

[

NATURAL]

: Produces natural colors.

[

MUTED]

: Produces flat tones.

[

PORTRAIT]

: Produces beautiful skin tones.

[MONOTONE]

: Produces black and white tone.



TIPS

Picture mode

Super control panel

ip

: [PICTURE MODE]



[

]



[PICTURE MODE]

button

CARD SETUP

CUSTOM RESET

PICTURE MODE

GRADATION

CANCEL SELECT

PICTURE MODE

MUTED

NATURAL

PORTRAIT

MONOTONE

VIVID

E-450_MASTER.fm Seite 63 Donnerstag, 16. April 2009 10:40 10

Record mode, white balance, and picture mode

The adjustable parameters are classified according to the

picture modes.

The individual parameters are as follows.

[CONTRAST]

: Distinction between light and dark

[SHARPNESS]

: Sharpness of the image

[SATURATION]

: Vividness of the color

[B&W FILTER]

: Creates a black and white image. The

filter color is brightened and the

complementary color is darkened.

[N: NEUTRAL]

: Creates a normal black and white

image.

[Ye: YELLOW]

: Reproduces clearly defined white

cloud with natural blue sky.

[Or: ORANGE]

: Slightly emphasizes colors in blue

skies and sunsets.

[R: RED]

: Strongly emphasizes colors in blue

skies and brightness of crimson

foliage.

[G: GREEN]

: Strongly emphasizes colors in red

lips and green leaves.

[PICT. TONE]

: Colors the black and white image.

[N: NEUTRAL]

: Creates a normal black and white image.

[S: SEPIA]

:Sepia

[B: BLUE]

:Bluish

[P: PURPLE]

: Purplish

[G: GREEN]

: Greenish

In addition to the

[NORMAL]

gradation setting, you can select from 3 other gradation settings.

[HIGH KEY]

: Gradation for a bright subject.

[LOW KEY]

: Gradation for a dark subject.

[AUTO]

: Divides the image into detailed regions and adjusts the brightness

separately for each region. This is effective for images with areas of large

contrast in which the whites appear too bright or the blacks appear too dark.

[NORMAL]

:Use

[NORMAL]

mode for general uses.

Notes

•

Contrast adjustment does not work when set to

[HIGH KEY]

[LOW KEY]

, or

[AUTO]

Gradation

Super control panel

ip

: [GRADATION]



[

]



[GRADATION]

CONTRAST

SHARPNESS

SATURATION

NATURAL

CANCEL SELECT

Lo Hi

CONTRAST

SHARPNESS

SATURATION

NATURAL

CANCEL SELECT

CONTRAST

HIGH KEY

Suitable for a subject that is

mostly highlighted.

LOW KEY

Suitable for a subject that is

mostly shadowed.

E-450_MASTER.fm Seite 64 Donnerstag, 16. April 2009 10:40 10

Record mode, white balance, and picture mode

This function reduces the noise that is generated during long exposures. When shooting night

scenes, shutter speeds are slower and noise tends to appear in images. With

[NOISE

REDUCT.]

, you can let the camera reduce noise automatically to produce clearer images.

When set to

[AUTO]

, noise reduction will be activated only when the shutter speed is slow.

When set to

[ON]

, noise reduction will always be activated. While noise reduction is activated, it

takes about twice the usual time to take a picture.

• The noise-reduction process is activated after shooting.

• The card access lamp blinks during the noise-reduction process. You cannot take more

pictures until the card access lamp turns off.

• [busy] is displayed on the viewfinder while noise reduction is operating.

Notes

•

When the

mode is set to

[NOISE REDUCT.]

is fixed to

[ON]

•

During sequential shooting,

[NOISE REDUCT.]

[OFF]

automatically.

•

This function may not work effectively with some shooting conditions or subjects.

You can select the noise processing level. Use

[STANDARD]

for general use.

[HIGH]

recommended during high sensitivity shooting.

Noise reduction



[

]



[NOISE REDUCT.]

Noise filter



[

]



[NOISE FILTER]

ON/AUTOOFF

E-450_MASTER.fm Seite 65 Donnerstag, 16. April 2009 10:40 10

Flash shooting

The camera sets the flash mode according to various factors such as firing pattern and flash

timing. Available flash modes depend on the exposure mode. The flash modes are available to

optional external flashes.

Auto flash AUTO

The flash fires automatically in low light or backlight conditions.

To shoot a subject with backlighting, position the AF target over the subject.

Red-eye reduction flash

In the red-eye reduction flash mode, a series of

pre-flashes are emitted just before the regular

flash fires. This helps accustom the subject’s

eyes to the bright light and minimizes the red-eye

phenomenon. In

mode, the flash always

fires.

Notes

•

After the pre-flashes, it takes about 1 second before the shutter is released. Hold the camera

firmly to avoid camera shake.

•

Effectiveness may be limited if the subject is not looking directly at pre-flashes, or if the shooting

range is too far. Individual physical characteristics may also limit effectiveness.

Slow synchronization (1st curtain)

SLOW

The slow synchronization flash is designed for slow shutter speeds. Normally, when shooting

with a flash, shutter speeds cannot go below a certain level to prevent camera shake. But when

shooting a subject against a night scene, fast shutter speeds can make the background too

dark. Slow synchronization allows you to capture both the background and the subject. Since

the shutter speed is slow, be sure to stabilize the camera by using a tripod so as not to cause

the picture to be blurred.

1st curtain

Usually, the flash fires right after the shutter fully opens. This is called 1st curtain. This method

is usually used during flash shooting.

Slow synchronization (2nd curtain)

SLOW2/2nd CURTAIN

2nd curtain flash fires just before the shutter closes. Changing the flash timing can create

interesting effects in your picture, such as expressing the movement of a car by showing the

tail-lights streaming backwards. The slower the shutter speed, the better the effects turn out.

mode, the flash always fires.

Flash mode setting

The subject’s eyes appear red

E-450_MASTER.fm Seite 66 Donnerstag, 16. April 2009 10:40 10

Flash shooting

When the shutter speed is set to 2 sec.

Slow synchronization (1st curtain)/Red-eye reduction flash

SLOW

While using slow synchronization with flash shooting, you can also use this function to achieve

red-eye reduction. When shooting a subject against a night scene, this function allows you to

reduce the red-eye phenomenon. As the time from emitting pre-flashes to shooting is long in

2nd curtain synchronization, it is difficult to achieve red-eye reduction. Hence, only 1st curtain

synchronization setting is available.

Fill-in flash

The flash fires regardless of the light conditions.

This mode is useful for eliminating shadows on the

subject’s face (such as shadows from tree leaves), in

a backlight situation, or for correcting the color shift

produced by artificial lighting (especially fluorescent

light).

Notes

•

When the flash fires, the shutter speed is set to 1/180 sec. or less. When shooting a subject

against a bright background with the fill-in flash, the background may be overexposed. In this

case, use the optional FL-50R external flash or a similar flash and shoot in the Super FP flash

mode.

“Super FP flash” (P. 71)

Flash off

The flash does not fire.

Even in this mode, the flash can be used as an AF illuminator when it is raised.

“AF ILLUMINAT.” (P. 83)

Manual flash

This allows the built-in flash to output a fixed amount of light. To shoot with manual flash, set the

f-number on the lens based on the distance to the subject.

Ratio of amount of light

GN: Guide number

(Equivalent to ISO 100)

FULL (1/1) 12

1/4 6

1/16 3

1/64 1.5

seconds

2nd curtain

1st curtain

2nd curtain flash fires

1st curtain flash fires

Shutter closes Shutter fully opens

2 seconds

Calculate the f-number on the lens using the following formula.

Aperture (f-number) =

GN x ISO sensitivity

Distance to the subject (m)

E-450_MASTER.fm Seite 67 Donnerstag, 16. April 2009 10:40 10

Flash shooting

ISO sensitivity

Setting method

•

Not all flash modes may be available depending on the

shooting mode. For details refer to “Flash modes that can

be set by shooting mode” (

P. 119).

If you shoot a subject using a lens that is wider than 14 mm (equivalent to 28 mm on a 35 mm

film camera), the light emitted by the flash may produce a vignette effect. Whether or not

vignetting occurs also depends on lens type and shooting conditions (such as distance to the

subject).

Press the

button to raise the built-in

flash.

•

The built-in flash will pop up automatically

and fire in low light conditions under the

following modes.

AUTO/i/&///B/U/G/J/r/g

ISO value

100 200 400 800 1600

ISO sensitivity

1.01.42.02.84.0

Direct button

#j

Super control panel

ip

: [FLASH MODE]

Built-in flash shooting

FLASH MODE

arge

Normal

OFF

button

E-450_MASTER.fm Seite 68 Donnerstag, 16. April 2009 10:40 10

Flash shooting

Press the shutter button halfway.

•

The

(flash stand-by) mark lights when the flash

is ready to fire. If the mark is blinking, the flash is

charging. Wait until charging is complete.

Press the shutter button all the way.

When you do not want the flash to pop up automatically:

Set

[AUTO POP UP]

[OFF]

“AUTO POP UP” (P. 88)

Notes

•

When

[

RC MODE]

is set to

[ON]

, the built-in flash will fire only to communicate with the

external flash so it will not function as a flash.

“Shooting with the Olympus wireless RC

flash system” (P. 71)

The flash intensity can be adjusted from +3 to –3.

In some situations (e.g., when shooting small subjects, distant backgrounds, etc.), you may get

better results by adjusting the amount of light emitted by the flash (“flash intensity”). It is useful

when you intend to increase the contrast (distinction between light and dark) of images to make

the images more vivid.

Notes

•

This does not work during manual flash.

•

This does not work when the flash control mode on the electronic flash is set to MANUAL.

•

If flash intensity is adjusted on the electronic flash, it will be combined with the camera’s flash

intensity setting.

•

When

[

]

is set to

[ON]

, the flash intensity value will be added to the exposure

compensation value.

“

” (P. 87)



TIPS

Flash intensity control

Direct button

Fj

Super control panel

ip

: [

]



[

]



[

]

Viewfinder

Flash stand-by mark

S-AF

0.0

OFF

METERING

RC MODE

AF MODE

AF AREA

ANTI-SHOCK

CANCEL SELECT

button

E-450_MASTER.fm Seite 69 Donnerstag, 16. April 2009 10:40 10

Flash shooting

In addition to the camera’s built-in flash capabilities, you can use any of the external flash units

specified for use with this camera. This enables you to take advantage of a wider variety of

flash shooting techniques to suit different shooting conditions.

The external flashes communicate with the camera, allowing you to control the camera’s flash

modes with various available flash control modes, such as TTL-AUTO and Super FP flash. An

external flash unit specified for use with this camera can be mounted on the camera by

attaching it to the camera’s hot shoe.

Refer to the external flash’s manual as well.

Functions available with external flash units

The focal length of the lens that can be used (Calculated based on 35 mm film camera)

Notes

•

The FL-40 optional flash cannot be used.

Using the external electronic flash

Be sure to attach the flash to the camera before turning on the flash’s power.

Remove the hot shoe cover by sliding it in the

direction indicated by the arrow in the

illustration.

•

Keep the shoe cover in a safe place to avoid losing it.

You can attach the shoe cover to the back of the

eyepiece cover, which is attached to the strap. Put

the shoe cover back on the camera after removing

the external flash.

Attach the electronic flash to the hot shoe

on the camera.

•

If the lock pin is protruding, turn the shoe lock

ring as far as it will go in the direction opposite

to LOCK. This will pull the lock pin back inside.

Turn on the flash.

•

When the charge lamp on the flash lights up, charging is

complete.

•

The flash will be synchronized with the camera at a speed

of 1/180 sec. or less.

Select a flash mode.

Select the flash control mode.

•

TTL-AUTO is recommended for normal use.

Press the shutter button halfway.

•

Shooting information such as ISO sensitivity, aperture

value, and shutter speed is communicated between the

camera and flash.

Press the shutter button all the way.

External flash shooting

Optional flash FL-50R FL-50 FL-36R FL-36 FL-20 RF-11 TF-22

Flash control mode

TTL-AUTO, AUTO, MANUAL,

FP TTL AUTO, FP MANUAL

TTL-AUTO,

AUTO, MANUAL

TTL-AUTO,

MANUAL

GN (Guide number)

(ISO100)

GN50 (85 mm

)

GN28 (24 mm

)

GN36 (85 mm

)

GN20 (24 mm

)

GN20 (35 mm

) GN11 GN22

RC mode

9 k 9 kkkk

Hot shoe cover

Lock pin Lock ring

E-450_MASTER.fm Seite 70 Donnerstag, 16. April 2009 10:40 10

Flash shooting

Notes

•

The built-in flash cannot be used when an external flash is attached to the hot shoe.

Super FP flash

Super FP flash is available with the FL-50R or FL-36R. Use

the Super FP flash where normal flashes cannot be used

with high shutter speed.

Fill-in flash shooting with the aperture open (such as in

outdoor portrait shooting) is also possible with Super FP

flash. For details, refer to the external flash’s manual.

Wireless flash shooting is possible with the Olympus wireless RC flash system. With this

wireless flash system, you can take pictures using multiple wireless flashes and control the

flashes in three groups (A, B, and C). The built-in flash is used to communicate between the

camera and the external flashes.

For details on using the wireless flash, see the manual of the external flash.

Wireless flash setup range

Position the wireless flash so that the wireless sensor faces the camera. The setup range

guidelines are as shown below. The range changes according to the surrounding environment.

Position the flash while referring to the “Wireless flash setup range”, and turn on

the flash.

Press the MODE button on the flash to set it to RC mode, and set the channel and

group of the flash.

Shooting with the Olympus wireless RC flash system

2008. 08.16

arge

Normal

OFF

Super FP flash

50°

100

100°

50°

10m

30°

60°

50°

100°

50°

30°

60°

Direction of

the emitted

flash

Remote sensor

Direction of

the camera

E-450_MASTER.fm Seite 71 Donnerstag, 16. April 2009 10:40 10

Flash shooting

Set RC mode on the camera to [ON].

•



[

]



[

RC MODE]



[ON]

•

The super control panel switches to RC mode.

•

You can press the

INFO

button to switch the super control panel display.

Use the super control panel to set the flash mode and other settings for each group.

Select a flash mode.

•

Red-eye reduction flash is not possible in RC mode.

Press the

button to raise the built-in flash.

After shooting preparations are completed, take some test shots to check the flash

operation and images.

Begin shooting while checking the charging completed indications of the camera

and flash.

Notes

•

Although there is no limit to the number of wireless flashes you can use, it is recommended

that each group have no more than three flashes to prevent flash malfunction due to mutual

interference.

•

In RC mode, the built-in flash is used to control the wireless flash. The built-in flash cannot be

used for flash shooting in this mode.

•

For 2nd curtain synchronization, set the shutter speed and anti-shock settings to within

4 seconds. Wireless flash shooting may not operate properly when using a slower shutter

speed or anti-shock setting.

LOM

TTL

1 / 8

–

+1.0

OFF

2008. 08.16

Flash control

mode

Group

•

Select the flash

control mode and

adjust the flash

intensity individually

for groups A, B, and

C. For MANUAL,

select the flash

intensity.

Flash intensity value

Communication light level

•

Set the communication light level

[HI]

[MID]

, or

[LO]

Channel

•

Set the communication channel

to the same channel used on the

flash.

Normal flash/Super FP flash

•

Switch between normal flash and

Super FP flash.

Flash

intensity

E-450_MASTER.fm Seite 72 Donnerstag, 16. April 2009 10:40 10

Flash shooting

You cannot use the camera to adjust the amount of light emitted from a commercially available

flash except for a flash specified for use with this camera. To use a commercially available

flash, connect it to the hot shoe. Set the camera’s shooting mode to

Remove the hot shoe cover to connect the flash unit to the camera.

Set the shooting mode to

, then set the aperture value and shutter speed.

•

Set the shutter speed to 1/180 sec. or slower. If the shutter speed is faster than this,

commercially available flashes cannot be used.

•

A slower shutter speed may produce blurred images.

Turn on the flash.

•

Be sure to turn on the flash after attaching the flash unit to the camera.

Set the ISO sensitivity and aperture value on the camera to match the flash control

mode on the flash.

•

Refer to the flash’s manual for instructions on how to set its flash control mode.

Notes

•

The flash fires each time the shutter is released. When you do not need to use the flash, turn off

the flash’s power.

•

Check beforehand that the flash you are using is synchronized with the camera.

Non-specified commercial flashes

Exposures when using a flash require that adjustments be made on the flash. If a flash is

used in the auto mode, match it with the f-number and ISO sensitivity settings on the

camera.

Even if the flash auto f-number and ISO sensitivity are set the same as on the camera, the

correct exposure may not be obtained depending on the shooting conditions. In such a case,

adjust the auto f-number or ISO on the flash or calculate the distance in the manual mode.

Use a flash with an illumination angle that matches the focal length of the lens. The focal

length of the lens for 35 mm film is approximately twice as long as the focal length of the

lenses designed for this camera.

Do not use a flash unit or other accessory TTL flash that has additional communication

functions other than the specified flashes, since it may not only fail to function normally,

but may also cause damage to the camera’s circuitry.

Using commercially available flashes

E-450_MASTER.fm Seite 73 Donnerstag, 16. April 2009 10:40 10

Playback functions

The basic procedure for viewing pictures are as shown below.

However, before using any of these functions, follow Step 1 below. You can set the camera to

automatically switch to single-frame playback mode after shooting.

“REC VIEW” (P. 90)

Press the

button (Single-frame playback).

•

The last recorded image appears.

•

The LCD monitor turns off after more than 1 minute if

no operations are performed. The camera will turn off

automatically if there is no operation after 4 hours.

Turn on the camera again.

Use

to select images you want to view. You can also

turn the dial to switch to

for close-up playback.

Single-frame/Close-up playback

INFO

button

Press

to change the

close-up position.

Press

to move the

display of the close-up

position.

When

[

FACE DETECT]

(

P. 39) is set to

[ON]

, a

frame is displayed around a

detected face. Press

move the frame to another

face.

Press

to view frame-by-

frame close-ups.

When

[

FACE DETECT]

is set to

[ON]

, press

to move to another face in

close-up position.

•

Press the

INFO

button to

return to close-up

playback.

(Single-frame playback) (Close-up playback)

Press the

INFO

button

: Displays the frame that is

stored 10 frames back

: Displays the frame that is

stored 10 frames ahead

: Displays the next frame

: Displays the previous frame

(Close-up position playback)

Press the

INFO

button

(Close-up frame-by-frame playback)

•

To exit the playback mode, press the

button again.

•

Pressing the shutter button halfway

resumes the shooting mode.

E-450_MASTER.fm Seite 74 Donnerstag, 16. April 2009 10:40 10

Playback functions

This function lets you show several images on the monitor at the same time. This is useful

when you want to quickly search a number of pictures to find a particular image.

During single-frame playback, each time you turn the dial

toward

, the number of images shown changes between

4, 9, 16, 25, 49 and 100 pictures.

:Moves to the previous frame

:Moves to the next frame

:Moves to the upper frame

:Moves to the lower frame

•

To return to single-frame playback, turn the control dial to

Calendar display

With the calendar, you can display images recorded on the card by date. If more than one

image was taken on a single date, the image shot first on that date is displayed.

Use

to select a date and press the

button to play back images for the selected date in

single-frame display.

Index display/Calendar display

(100-frame index

display)

(9-frame index

display)

(4-frame index

display)

(Single-frame

playback)

(Calendar display) (49-frame index

display)

(16-frame index

display)

(25-frame index

display)

E-450_MASTER.fm Seite 75 Donnerstag, 16. April 2009 10:40 10

Playback functions

This allows you to display detailed information about the image.

Luminance information can also be displayed with histogram and

highlight graphs.

Press the

INFO

button repeatedly until the desired

information is displayed.

•

This setting is stored and will be shown the next time the

information display is called up.

Information display

INFO

button

100 -001 5100-0015 1 515

[36 48x2 736 ,1/8 ][3648x2736,1/8]

’08 .12. 16’08.1 2.16 2 1:5621:56

100 -001 5100-0015 1 515

1/2 50 F 5.6250 F5.6

+2. 0 45 mm+2.0 45mm

ISO 100ISO 100

0.00.0

A: 0A: 0

WB : AUTOWB : AUTO

G: 0G: 0

NATURALNATURAL

sRG BsR GB

SHADOW

HILIGHT

Shadow/Highlight display

Image only Information 1 Information 2

Shadow/Highlight display Histogram display

Histogram

Shooting

information

Displays the frame

number, print reservation,

protect, record mode and

file number

Displays the frame number,

print reservation, protect,

record mode, number of pixels,

compression rate, date and

time and file number

Distribution of the brightness of the

recorded image is displayed in a

histogram (brightness component

graph).

Under- or overexposed parts of the recorded image are

displayed.

Shadows (underexposed) parts will be shown in blue.

Highlights (overexposed) parts will be shown in red.

*Histogram

If the bars in the histogram are higher on the

right, the image may be too bright. If the bars

are higher on the left, the image may be too

dark. Compensate the exposure or shoot again.

Overall

information

E-450_MASTER.fm Seite 76 Donnerstag, 16. April 2009 10:40 10

Playback functions

This function displays images stored on the card one after another. Images are displayed one

by one for about 5 seconds starting from the currently displayed image. Slideshow can be

performed using index display. You can select the number of frames displayed during slideshow

from 1, 4, 9, 16, 25, 49 or 100.



[

]



[

]

Use

to set.

[

]

(1-frame display)/

[

]

(4-frame display)/

[

]

(9-frame display)/

[

]

(16-frame display)/

[

]

(25-frame display)/

[

]

(49-frame display)/

[

]

(100-frame display)

Press the

button to start the slideshow.

Press the

button to stop the slideshow.

Notes

•

If the slideshow is left running for about 30 minutes, the camera will turn off automatically.

This function lets you rotate images and display them vertically on the monitor during single-

frame playback. This is useful when taking pictures with the camera held vertically. The images

will automatically be displayed in the correct direction even if the camera is rotated.



[

]



[

]

•

When set to

[ON]

, images shot vertically will be automatically

rotated and displayed during playback. You can also press the

button to rotate and display the image.

•

The rotated image will be recorded on the card in that position.

Slideshow

Rotating images

When selecting

[

]

button

Original image before

rotating

FFF

E-450_MASTER.fm Seite 77 Donnerstag, 16. April 2009 10:40 10

Playback functions

Use the video cable provided with the camera to play back recorded images on your TV.

Turn the camera and TV off, and connect

the video cable as illustrated.

Turn on the TV and set it to the video

input mode. For details on switching to

the video input mode, refer to the TV’s

manual.

Turn the camera on and press the

(playback) button.

Notes

•

To connect the camera to a TV, use the provided video cable.

•

Make sure that the camera’s video output signal type is the same as the TV’s video signal type.

“VIDEO OUT” (P. 90)

•

The camera’s monitor turns off automatically when the video cable is connected to the camera.

•

The image may appear off-center depending on the TV screen.

Recorded images can be edited and saved as new images. Available editing functions depend

on the image format (image record mode).

A JPEG file can be printed as is without modification. A RAW file, on the other hand cannot be

printed as is. To print a RAW file, use the RAW edit function to convert the RAW data format to

JPEG.

Editing images recorded in RAW data format

The camera performs image processing (such as white balance and sharpness adjustment) on

images in the RAW data format, then saves the data to a new file in the JPEG format. While

checking recorded images, you can edit them to your liking.

Image processing is performed based on the current camera settings. Change the

camera settings to suit your preferences before editing.

Playback on TV

Editing still images

button

Video input terminal

Video cable

Multi-connector

E-450_MASTER.fm Seite 78 Donnerstag, 16. April 2009 10:40 10

Playback functions

Editing images recorded in JPEG data format

[SHADOW ADJ]

Brightens a dark backlit subject.

[REDEYE FIX]

Reduces the red-eye phenomenon during flash shooting.

[

]

Set the trimming size with the control

dial and the trimming position with the

arrow pad.

[BLACK & WHITE]

Creates black and white images.

[SEPIA]

Creates sepia-toned images.

[SATURATION]

Sets the color depth. Adjust the color saturation checking the picture on

the screen.

[

]

Converts the image file size to 1280 x 960, 640 x 480 or 320 x 240.



[

]



[EDIT]

Use

to select an image, then press the

button.

•

The camera recognizes the image data format.

•

For images recorded in RAW+JPEG, a selection screen

will appear, asking you which data to edit.

The setting screen varies with the image data

format. Select the item you want to edit and do the

following steps.

•

The edited image is saved as another image, apart from the original image.

•

To exit the edit mode, press the

button.

Notes

•

Red-eye correction may not work depending on the image. Red-eye correction may affect other

parts of the image, as well as the eyes.

•

Editing of a JPEG image is not possible in the following cases:

When an image is recorded in RAW, when an image is processed on a PC, when there is not

enough space in the card memory, when an image is recorded on another camera.

•

When resizing (

[

]

) an image, you cannot select a larger number of pixels than was originally

recorded.

GOGOGO

CANCEL SELECT GO

Confirm the data format from here.

JPEG EDIT

CANCEL SELECT

SHADOW ADJ

REDEYE FIX

BLACK & WHITE

SEPIA

RAW DATA EDIT

YES

CANCEL SELECT

E-450_MASTER.fm Seite 79 Donnerstag, 16. April 2009 10:40 10

Playback functions

This function lets you copy images to and from the xD-Picture Card and CompactFlash or

Microdrive. This menu can be selected if both cards are inserted. The selected card is the

copying source.

“CF/xD” (P. 90)

Single-frame copy

Play back the image you want to copy and press the

COPY

button.

Use

to select [YES], then press the

button.

Copying selected frames

This function lets you select multiple images and copy them all at the same time during single-

frame playback or index display.

Display the images you want to copy and press the

button.

•

The selected images will be shown with red frames.

•

To cancel your selection, press the

button again.

Press

to display the next images you want to

copy and press the

button.

After you have selected the images to copy, press

the

COPY

button.

Use

to select [YES], then press the

button.

Copying all the frames



[

]



[COPY ALL]

Press

Use

to select [YES], then press the

button.

Copying images

COPY/

button

COPY SELECT

YES

CANCEL SELECT

YES

COPY ALL

CANCEL SELECT

E-450_MASTER.fm Seite 80 Donnerstag, 16. April 2009 10:40 10

Playback functions

Protect images you do not want to erase. Protected images cannot be erased by the single-

frame or all-frame erase function.

Single-frame protect

Play back the image you want to protect and press the

button.

• 9

(protect mark) is displayed on the top right corner of the

screen.

To cancel the protection

Display the images that are protected and press the

button.

Protecting selected frames

This function lets you select multiple images and protect them all at the same time during

single-frame playback or index display.

Display the images you want to protect and press the

button.

•

The selected images will be shown with red frames.

•

To cancel your selection, press the

button again.

•

During index display, press

to select the images you want to protect and press the

button.

Press

to display the next images you want to protect and press the

button.

After you have selected the images to protect, press the

button.

Canceling all protections

This function lets you cancel the protection of several images at one time.



[

]



[RESET PROTECT]

Use

to select [YES], then press the

button.

Notes

•

Formatting the card erases all images even if they have been protected.

“Formatting the card” (P. 114)

•

Protected images cannot be rotated even when the

button is pressed.

Protecting images

button

E-450_MASTER.fm Seite 81 Donnerstag, 16. April 2009 10:40 10

Playback functions

Lets you erase recorded images. You can select single-frame erase, which erases only the

currently displayed image; all-frame erase, which erases all the images stored on the card; or

selected frame erase, which erases only the frames selected.

Notes

•

When you perform all-frame or selected frame erase on images recorded using RAW+JPEG,

both the RAW and JPEG images are erased. When using single-frame erase, you can select

whether to erase the JPEG, RAW, or both RAW and JPEG images.

“RAW+JPEG ERASE” (P. 89)

•

Protected images cannot be erased. Cancel protected images, then erase them.

•

Once erased, images cannot be restored.

“Protecting images” (P. 81)

Single-frame erase

Play back the image you want to erase and press the

button.

Use

to select [YES], then press the

button.

Erasing selected frames

This function lets you erase selected images at one time during single-frame playback or index

display.

Display the images you want to erase and press the

button.

•

The selected images will be shown with red frames.

•

To cancel your selection, press the

button again.

•

During index display, press

to select the images you want to erase and press the

button.

Press

to display the next images you want to erase and press the

button.

After you have selected the images to erase, press the

button.

Use

to select [YES], then press the

button.

All-frame erase



[

]



[CARD SETUP]

Use

to select [ALL ERASE], then press the

button.

Use

to select [YES], then press the

button.

•

All frames will be erased.

Erasing images

button

E-450_MASTER.fm Seite 82 Donnerstag, 16. April 2009 10:40 10

Customizing your camera

Use the custom menus to customize the camera for ease of use. Use Custom Menu 1 to

customize the shooting functions and Custom Menu 2 to set the basic camera functions.

Custom Menu 1 has 8 tabs (

) that are divided according to the functions to be set.

For details on using the menu lists, see “Using the menu” (

P. 29).

Custom Menu 1

a

AF/MF

AF ILLUMINAT.

The built-in flash can function as an AF illuminator. This helps with focusing in low-light

conditions in the AF mode. To use this function, raise the flash.

FOCUS RING

You can customize how the lens adjusts to the focal point

by selecting the rotational direction of the focus ring.

RESET LENS

When set to

[ON]

, this resets the focus of the lens (infinity) each time the power is turned off.

BULB FOCUSING

You can set the camera to enable focus adjustments during bulb shooting with MF.

[ON]

During exposure, you can turn the focus ring and adjust the focus.

[OFF]

The focus is locked during exposure.

Custom Menu 1

b

BUTTON/DIAL

DIAL FUNCTION

You can also switch the operation of the control dial to the opposite of factory default settings.

For example, after setting

[P]

[

]

, in

mode you can adjust the exposure compensation

using the control dial and set the program shift using the control dial while holding down the

button.

AF/MF

BUTTON/DIAL

DISP/

/PC

EXP/

/ISO

CUSTOM

CANCEL SELECT

/COLOR/WB

CANCEL SELECT

DIAL FUNCTION

DIAL DIRECTION

OFF

AEL/AFL

AEL/AFL MEMO

FUNCTION

S1/C2/M1

DIAL FUNCTION

CANCEL SELECT

DIAL DIRECTION

AEL/AFL

OFF

AEL/AFL MEMO

FUNCTION

S1/C2/M1

AEL/AFL

C-AF

S-AF

Use

to select

[

]

, then

press

Use

to select tab

then press

Use

to select a function,

then press

Near

)

E-450_MASTER.fm Seite 83 Donnerstag, 16. April 2009 10:40 10

Customizing your camera

DIAL DIRECTION

You can select the rotational direction of the control dial and the direction in which the shutter

speed/aperture value will increase or decrease.

AEL/AFL

You can use the

AEL

AFL

button to perform AF or metering operations instead of using the

shutter button.

Select the function of the button to match the operation when the shutter button is pressed.

Select

[mode1]

[mode4]

in each focus mode. (You can only select

[mode4]

in C-AF mode.)

Mode Setting

j F

button +

(program shift) Program shift Exposure compensation

Exposure compensation Program shift

FNo. Aperture value Exposure compensation

Exposure compensation Aperture value

SHUTTER Shutter speed Exposure compensation

Exposure compensation Shutter speed

SHUTTER Shutter speed Aperture value

FNo. Aperture value Shutter speed

Setting

(rotational direction of the dial)

DIAL1

•

Slower shutter speed

•

Open the aperture (f-number is decreased)

•

Faster shutter speed

•

Close the aperture (f-number is increased)

DIAL2

•

Faster shutter speed

•

Close the aperture (f-number is increased)

•

Slower shutter speed

•

Open the aperture (f-number is decreased)

Mode

Shutter button function

AEL/AFL

button function

Half-press Full press When holding down AEL/AFL

Focus Exposure Focus Exposure Focus Exposure

[S-AF]

mode1

S-AF Locked

kk k

Locked

mode2

S-AF

Locked

mode3

Locked

S-AF

[C-AF]

mode1

C-AF start Locked Locked

Locked

mode2

C-AF start

Locked Locked

Locked

mode3

Locked Locked

C-AF start

mode4

Locked Locked C-AF start

[MF]

mode1

Locked

kk k

Locked

mode2

kkk

Locked

mode3

Locked

S-AF

E-450_MASTER.fm Seite 84 Donnerstag, 16. April 2009 10:40 10

Customizing your camera

Basic operations

[mode1]

For determining the metered exposure while focusing. AE lock is activated while

pressing the

AEL

AFL

button, allowing you to adjust the focus and determine the

exposure separately.

[mode2]

For determining the exposure when you press the shutter button fully. This is

useful for shooting scenes with significant changes in lighting, such as on a stage.

[mode3]

For focusing with the

AEL

AFL

button instead of the shutter button.

[mode4]

Press the

AEL

AFL

button to focus, and press the shutter button fully to

determine the exposure.

AEL/AFL MEMO

You can lock and maintain the exposure by pressing the

AEL

AFL

button.

[ON]

Press the

AEL

AFL

button to lock and maintain the exposure. Press again to

cancel the maintaining of the exposure.

[OFF]

The exposure will be locked only while the

AEL

AFL

button is pressed.

FUNCTION

You can assign a function to the

button (

button).

[Fn FACE DETECT]

Press the

button to set

[

FACE DETECT]

[ON]

and activate the optimal settings.

“Using the face detection function” (P. 39), “

FACE DETECT” (P. 87)

[PREVIEW]/[LIVE PREVIEW] (electronic)

While holding down the

button, you can use the preview function.

“Preview function” (P. 46)

[

]

Press the

button to acquire the WB value.

“Setting the one-touch white

balance” (P. 63)

[TEST PICTURE]

Pressing the shutter button while pressing the

button enables you to check the

picture you have just taken on the monitor without having to record the picture to the

card. This is useful when you want to see how a picture turned out without saving it.

[OFF]

Does not allow function allocation.

FUNCTION

Other functions can be assigned to the

button.

[

]

“Sequential shooting” (P. 55), “Self-timer shooting” (P. 56), “Remote control

shooting” (P. 57)

[AF AREA]

“AF target selection” (P. 53)

[AF MODE]

“AF mode selection” (P. 51)

[WB]

“Selecting the white balance” (P. 60)

[METERING]

“Changing the metering mode” (P. 47)

[ISO]

“ISO sensitivity setting” (P. 50)

E-450_MASTER.fm Seite 85 Donnerstag, 16. April 2009 10:40 10

Customizing your camera

Custom Menu 1

c

DISP/

/PC

You can turn off the beep sound that is emitted when the focus locks by pressing the shutter

button.

SLEEP

After a specified period of time elapses with no operations being performed, the camera enters

the sleep mode (stand-by) to save battery power. After the super control panel is displayed for a

specified period of time, the backlight turns off. After a specific period of time has further passed,

the camera enters sleep mode.

[SLEEP]

lets you select sleep timer from

[1 MIN]

[3 MIN]

[5 MIN]

, or

[10 MIN]

[OFF]

cancels the sleep mode.

The camera activates again as soon as you touch any button (the shutter button,

button,

etc.).

BACKLIT LCD (Backlight timer)

To save battery power, after the super control panel is displayed for a specified period of time,

the monitor backlight turns off and the monitor darkens. Select from

[8SEC]

[30SEC]

, or

[1 MIN]

for the time until the backlight turns off.

[HOLD]

sets the backlight to stay on.

The monitor backlight turns on again as soon as you touch any button (the shutter button, arrow

pad, etc.).

USB MODE

You can connect the camera directly to a computer or printer with the provided USB cable. If

you specify the device you are connecting to beforehand, you can skip the USB connection

setting procedure normally required every time you connect the cable to the camera.

For details on how to connect the camera to either device, refer to “Connecting the camera to

a printer” (

P. 94) and “Connecting the camera to a computer” (

P. 9 8 ) .

[AUTO]

The selection screen for the USB connection will be displayed every time you connect

the cable to a computer or printer.

[STORAGE]

Allows you to transfer images to a computer. Also, select to use the OLYMPUS Master

software via PC connection.

[MTP]

Allows you to transfer images to a computer running Windows Vista without using the

OLYMPUS Master software.

[CONTROL]

Allows you to control the camera from a PC using the optional OLYMPUS Studio.

[

EASY]

Can be set when connecting the camera to a PictBridge-compatible printer. Pictures

can be printed directly without using a PC.

“Connecting the camera to a

printer” (P. 94)

[

CUSTOM]

Can be set when connecting the camera to a PictBridge-compatible printer. You can

print out pictures with set number of prints, print paper and other settings.

“Connecting the camera to a printer” (P. 94)

E-450_MASTER.fm Seite 86 Donnerstag, 16. April 2009 10:40 10

Customizing your camera

LIVE VIEW BOOST

During live view shooting, you can brighten the monitor for easier confirmation on the subject.

[OFF]

The subject is displayed on the monitor with the brightness level that is adjusted

according to the exposure being set. You can shoot while confirming through the

monitor in advance to get a picture that is to your liking.

[ON]

The camera automatically adjusts the brightness level and displays the subject on the

monitor for easier confirmation. The effect of the exposure compensation adjustments

will not be reflected on the monitor.

FACE DETECT

When set to

[ON]

, the camera will detect people’s faces and automatically adjust the focus there.

“Using the face detection function” (P. 39)

You can play back close-up images focusing on the subject’s face.

“Single-frame/Close-up

playback” (P. 74)

FRAME ASSIST (Ruled lines display)

During live view, you can display the ruled lines on the LCD monitor as a guide when confirming

the composition. Press the

INFO

button repeatedly to display the ruled lines.

“Switching

the information display” (P. 40)

Custom Menu 1

d

EXP/

/ISO

ISO-AUTO SET

You can set the upper limit when ISO is set to

[AUTO].

This sets the upper limit of the ISO value that automatically changes. The upper limit can be set

from 100 to 1600.

ISO-AUTO

You can set the shooting mode in which the ISO

[AUTO]

setting is activated.

[

]

The

[AUTO]

setting is activated in all shooting modes except

mode. When

[AUTO]

selected in

mode, ISO 100 is set.

[ALL]

The

[AUTO]

setting is activated for all shooting modes. The ISO is automatically

selected to obtain the optimal ISO even in

mode.

AEL Metering

You can set the metering mode when pressing the

AEL

AFL

button to lock the exposure.

•

[AUTO]

performs metering in the mode selected under

[METERING]

BULB TIMER

You can select the maximum time (in minutes) for bulb shooting.

Custom Menu 1

e

CUSTOM

When set to

[ON]

, it will be added to the exposure compensation value and flash intensity

control will be performed.

E-450_MASTER.fm Seite 87 Donnerstag, 16. April 2009 10:40 10

Customizing your camera

AUTO POP UP

AUTO

or scene mode, the built-in flash pops up automatically in low light or backlight

conditions. When set to

[OFF]

, the built-in flash will not pop up automatically.

Custom Menu 1

f

/COLOR/WB

ALL

You can apply the same compensation value to all the white balance modes at once.

[ALL SET]

The same compensation value applies to all WB modes.

[ALL RESET]

The WB compensation value settings applied to each WB mode are all

cleared at once.

If you select [ALL SET]

Use

to select the color direction.

Toward A: Amber-Blue/Toward G: Green-Magenta

Use

to set the compensation value.

“WB compensation” (P. 62)

Releasing the

AEL

AFL

button takes a sample image. You can check the white balance you

have adjusted.

If you select [ALL RESET]

Use

to select

[YES]

COLOR SPACE

You can select how colors are reproduced on the monitor or printer. The first character in image

file names indicates the current color space.

“FILE NAME” (P. 89)

SET

You can combine 3 image sizes and 4 compression rates

and register 4 combinations. Select the registered setting

with

[

]

“Selecting the record mode” (P. 59)

PIXEL COUNT

You can set the pixel size for the image size

[

]

[

]

[

iddle]

Select

[3200 x 2400]

[2560x1920]

, or

[1600 x 1200]

[

mall]

Select

[1280 x 960]

[1024 x 768]

, or

[640 x 480]

[sRGB]

Standardized color space for Windows.

[Adobe RGB]

Color space that can be set with Adobe Photoshop.

of image settings.

Set the compression rate.

SET

CANCEL SELECT

PIXEL COUNT

arge

SFF NSF

1 2 34

Set the number

of pixels.

E-450_MASTER.fm Seite 88 Donnerstag, 16. April 2009 10:40 10

Customizing your camera

Custom Menu 1

g

RECORD/ERASE

RAW+JPEG ERASE

You can select the method to erase images recorded in RAW+JPEG. This function can only be

used to erase one frame.

[JPEG]

Erases all JPEG image files, leaving only the RAW image files.

[RAW]

Erases all RAW image files, leaving only the JPEG image files.

[RAW+JPEG]

Erases both image file types.

Notes

•

This function is effective only if deleting one frame. For all-frame erase or erasing selected

frames, both RAW and JPEG will be erased regardless of this setting.

FILE NAME

When you take a picture, the camera assigns it a unique file name and saves it in a folder.

File names are assigned as shown in the illustration below.

[AUTO]

Even when a new card is inserted, the folder numbers are retained from the previous

card. If the new card contains an image file whose file number coincides with one saved

on the previous card, the new card’s file numbers start at the number following the

highest number on the previous card.

[RESET]

When a new card is inserted, folder numbers start at 100 and file numbers start at 0001.

If a card containing images is inserted, the file numbers start at the number following the

highest file number on the card.

• When both the Folder and File No. reach their respective maximum number (999/9999), it is not

possible to store additional pictures even if the card is not full. No more pictures can be taken.

Replace the card with a new one.

dpi SETTING

You can set the resolution for printing images in advance. The set value is recorded on the card

with the images.

[AUTO]

Automatically set according to the image size.

[CUSTOM]

You can make the desired setting. Press

to display the setting screen.

All folders

Folder name

000 OLYMP

Folder number (100–999)

Pmdd0000.jpg

File name

Day

(01–31)

Month

(10, 11, 12 are

numbered A, B, C)

Color space

P: sRGB

_: Adobe RGB

File number

(0001–9999)

After taking 9999 pictures, the counter is reset to 0001 for the

next picture, the folder number increments by 1 to name and

create a new folder where the next image (file) is stored.

E-450_MASTER.fm Seite 89 Donnerstag, 16. April 2009 10:40 10

Customizing your camera

Custom Menu 2

CF/xD

You can select which card to use when both a CompactFlash and xD-Picture Card are loaded.

(Monitor brightness adjustment)

You can adjust the brightness and color temperature of the

monitor. Color temperature adjustment will affect only the

LCD monitor display during playback.

Use

to switch between

(brightness) and

(color

temperature), and use

to adjust the value between

[+7]

–

[–7]

(Changing the display language)

You can change the language used for the on-screen display and error messages from

ENGLISH to another language.

•

You can add another language to your camera with the provided OLYMPUS Master software.

For details, refer to Help in OLYMPUS Master software.

“Using the OLYMPUS Master

software” (P. 97)

VIDEO OUT

You can select NTSC or PAL according to your TV’s video signal type.

You will need to set this when you want to connect the camera to a TV and play back images in

a foreign country. Make sure the correct video signal type is selected before connecting the

video cable. If you use the wrong video signal type, recorded pictures will not play back

properly on your TV.

TV video signal types in major countries and regions

Check the video signal type before connecting the camera to your TV.

REC VIEW

You can display the picture you have just taken on the monitor while it is being recorded to the

card, and to select how long the picture is displayed. This is useful for making a brief check of

the picture you have just taken. Pressing the shutter button halfway while checking the picture

lets you resume shooting immediately.

[1SEC] – [20SEC]

Selects the number of seconds to display each picture. Can be set in

units of 1 second.

[OFF]

The picture being recorded to the card is not displayed.

[AUTO

]

Displays the image being recorded, and then switches to playback

mode. This is useful for erasing a picture after checking it.

FIRMWARE

Your product’s firmware version will be displayed.

When you make inquiries about your camera or accessories or when you want to download

software, you will need to state which version of each of the products you are using.

Press

. Your product’s firmware version will be displayed. Press the

button to return to the

previous screen.

NTSC North America, Japan, Taiwan, Korea

PAL European countries, China

–

CANCEL SELECT

E-450_MASTER.fm Seite 90 Donnerstag, 16. April 2009 10:40 10

Printing

Print reservation

Print reservation allows you to save printing data (the number of prints and the date/time

information) with the pictures stored on the card.

Pictures set with print reservation can be printed using the following methods.

Printing using a DPOF-compatible photo lab

You can print the pictures using the print reservation data.

Printing using a DPOF-compatible printer

Pictures can be printed directly from a dedicated printer without using a PC. For more details,

refer to the printer’s manual. A PC card adapter may also be necessary.

Notes

•

DPOF reservations set by another device cannot be changed by this camera. Make changes

using the original device. Moreover, setting new DPOF reservations using this camera will erase

the previous reservations set by another device.

•

Not all functions may be available on all printers or at all photo labs.

•

RAW data are not printable.

Single-frame reservation

Follow the operation guide to set print reservation for a picture.



[

]



[

]

Select [

] and press the

button.

Press

to select the frame that you want to set

as print reservation, then press

to set the

number of prints.

•

To set print reservation for several pictures, repeat this

step.

Press the

button when you have finished.

•

The menu screen for single-frame reservation appears.

Print reservation (DPOF)

EDIT

COPY ALL

RESET PROTECT

CANCEL SELECT

Operation guide

CANCEL SELECT

PRINT ORDER SETTING

CANCEL SELECT

E-450_MASTER.fm Seite 91 Donnerstag, 16. April 2009 10:40 10

Printing

Select the date and time format and press the

button.

[NO]

The pictures are printed without the date and time.

[DATE]

The pictures are printed with the shooting date.

[TIME]

The pictures are printed with the shooting time.

Select [SET] and press the

button.

All-frame reservation

Applies print reservation to all the pictures stored in the card. The number of prints is fixed at 1.



[

]



[

]

Select [

] and press the

button.

Select the date and time format and press the

button.

[NO]

The pictures are printed without the date and time.

[DATE]

The pictures are printed with the shooting date.

[TIME]

The pictures are printed with the shooting time.

Select [SET] and press the

button.

Resetting the print reservation data

You can reset all print reservation data or just the data for selected pictures.



[

]



[

]

Resetting the print reservation data for all pictures

Select [

] or [

] and press the

button.

Select [RESET] and press the

button.

DATE

TIME

CANCEL SELECT

SET

CANCEL

CANCEL SELECT

PRINT ORDER SETTING

RESET

KEEP

PRINT ORDERED

PRINT ORDER SETTING

CANCEL SELECT

E-450_MASTER.fm Seite 92 Donnerstag, 16. April 2009 10:40 10

Printing

Resetting the print reservation data for a selected picture

Select [

] and press the

button.

Select [KEEP] and press the

button.

Use

to select the frame with print reservation data you want to reset, then press

to set the number of prints to 0.

Press the

button when you have finished.

Select the date and time format and press the

button.

•

This setting is applied to all frames with print reservation data.

Select [SET] and press the

button.

By connecting the camera to a PictBridge-compatible printer with the USB cable, you can print

out recorded pictures directly. To find out if your printer is compatible with PictBridge, refer to

the printer’s manual.

PictBridge

The standard that enables digital cameras and printers made by different manufacturers to be

connected, and also allows pictures to be printed directly from the camera.

STANDARD

All printers that support PictBridge have standard print settings. By selecting

[STANDARD]

the settings screens (

P. 95), you can print pictures according to these settings. For details

on your printer’s standard settings, refer to the printer’s manual or contact the printer

manufacturer.

Notes

•

Use a fully charged battery for printing.

•

Images recorded in RAW data cannot be printed.

•

The camera will not enter sleep mode while it is connected to the USB cable.

Direct printing (PictBridge)

•

The available print modes and settings such as paper size vary with the type of printer.

For details, refer to the printer’s manual.

•

For details on printing paper types, ink cassettes, etc., refer to the printer’s manual.

E-450_MASTER.fm Seite 93 Donnerstag, 16. April 2009 10:40 10

Printing

Connecting the camera to a printer

Use the provided USB cable to connect the camera to a PictBridge-compatible printer.

Turn the printer on and connect the camera’s multi-connector to the printer’s USB

port with the USB cable.

•

For details on how to turn the printer on and the position of the USB port, refer to the printer’s

manual.

Turn on the camera.

•

The selection screen for the USB connection is displayed.

Use

to select [EASY PRINT] or [CUSTOM PRINT].

If you select [EASY PRINT]

•

Go to “Easy printing” (

P. 9 4 )

If you select [CUSTOM PRINT]

•

[ONE MOMENT]

is displayed and the camera and printer

are connected.

Go to “Custom printing” (gP. 95)

Notes

•

If the screen is not displayed after a few minutes,

disconnect the USB Cable and start again from Step 1.

Easy printing

Use

to display the pictures you want to print on the camera.

•

Display the image you want to print on the camera and

connect the camera with a printer using a USB cable.

The screen on the right appears shortly.

Press the

(print) button.

•

The picture selection screen appears when printing is

completed. To print another picture, use

to select the

image and press the

button.

•

To exit, unplug the USB cable from the camera while the

picture selection screen is displayed.

Multi-connector

USB cable

STORAGE

MTP

CONTROL

EASY PRINT

CUSTOM PRINT

USB

SELECT GO

PC / CUSTOM PRINT

EASY PRINT START

E-450_MASTER.fm Seite 94 Donnerstag, 16. April 2009 10:40 10

Printing

Custom printing

Follow the operation guide to set a print option.

Selecting the print mode

Select the type of printing (print mode). The available print

modes are as shown below.

[PRINT]

Prints selected pictures.

[ALL PRINT]

Prints all the pictures stored in the card

and makes one print for each picture.

[MULTI PRINT]

Prints multiple copies of one image in

separate frames on a single sheet.

[ALL INDEX]

Prints an index of all the pictures stored

in the card.

[PRINT ORDER]

Prints according to the print reservation

you made. If there is no picture with

print reservation, this is not available. (

P. 91)

Setting the print paper items

This setting varies with the type of printer. If only the printer’s STANDARD setting is available, you

cannot change the setting.

[SIZE]

Sets the paper size that the printer

supports.

[BORDERLESS]

Selects whether the picture is printed

on the entire page or inside a blank

frame.

[PICS/SHEET]

Selects the number of pictures per

sheet. Displayed when you have

selected

[MULTI PRINT]

Selecting pictures you want to print

Select pictures you want to print. The selected pictures can be printed later (single-frame

reservation) or the picture you are displaying can be printed right away.

[PRINT]

(

) Prints the currently displayed

picture. If there is a picture that

[SINGLE PRINT]

reservation has

already been applied to, only that

reserved picture will be printed.

[SINGLE PRINT]

(

) Applies print reservation to the

currently displayed picture. If you

want to apply reservation to other

pictures after applying

[SINGLE

PRINT]

, use

to select them.

[MORE]

(

) Sets the number of prints and

other items for the currently displayed picture, and whether or not to

print it. For operation, refer to “Setting printing data” (

P. 96) in the

next section.

ALL PRINT

MULTI PRINT

ALL INDEX

PRINT ORDER

PRINT MODE SELECT

EXIT SELECT GO

Follow the operation guide displayed

here.

PRINTPAPER

STANDARD STANDARD

SIZE BORDERLESS

CANCEL SELECT

PRINTPAPER

STANDARD

SIZE PICS/SHEET

CANCEL SELECT

SINGLEPRINT

SELECT

E-450_MASTER.fm Seite 95 Donnerstag, 16. April 2009 10:40 10

Printing

Setting printing data

Select whether to print printing data such as the date and time or file name on the picture when

printing.

[

Sets the number of prints.

[DATE]

Prints the date and time recorded on the

picture.

[FILE NAME]

Prints the file name recorded on the picture.

[

]

Trims the picture for printing. Set the

trimming size with the control dial and the

trimming position with the arrow pad.

Once you have set the pictures for printing and

printing data, select [PRINT], then press the

button.

[PRINT]

Transfers images you print to the printer.

[CANCEL]

Resets the settings. All print reservation

data will be lost. If you want to keep the

print reservation data and make other

settings, press

. This returns you to the

previous setting.

•

To stop and cancel printing, press the

button.

[CONTINUE]

Continues printing.

[CANCEL]

Cancels printing. All print reservation data

will be lost.

DATE

FILE NAME

WITHOUT

PRINT INFO

SELECT SET GO

CANCEL

CANCEL SELECT

CONTINUE

CANCEL

SELECT GO

E-450_MASTER.fm Seite 96 Donnerstag, 16. April 2009 10:40 10

Using the OLYMPUS Master software

Just connect the camera to a computer with the USB cable and you can easily transfer images

stored on the card to the computer with the provided OLYMPUS Master software.

What is OLYMPUS Master?

OLYMPUS Master is an image management program with viewing and editing features for

pictures taken with your digital camera. Once installed on your computer, you can take

advantage of the following.

For information about OLYMPUS Master’s other features, as well as for details on how to use the

software, refer to “Help” in OLYMPUS Master software.

Flowchart

Things to prepare

•

OLYMPUS Master 2 CD-ROM

•

USB cable

•

Computer that fulfills the operating

environment

(For the required operating environment, refer

to the OLYMPUS Master installation guide.)

Installing OLYMPUS Master

(Refer to the installation guide included with the OLYMPUS Master)

Connecting the camera with your computer using the provided USB cable (

P. 98)

Starting OLYMPUS Master (

P. 99)

Saving pictures to your computer (

P. 99)

Disconnecting the camera from your computer (

P. 99)

Using the provided OLYMPUS Master software

Transferring images from the camera or

removable media to your computer

Viewing images

You can also enjoy slideshows and sound

playback.

Grouping and organizing images

You can organize images into albums or

folders. Transferred images are automatically

organized by shooting date, allowing you to

quickly find the particular images you want.

Correcting images using filter and

correction functions

Editing images

You can rotate, trim or change the image size.

A variety of printing formats

You can easily make prints of your pictures.

Updating the camera firmware

Developing RAW images

E-450_MASTER.fm Seite 97 Donnerstag, 16. April 2009 10:40 10

Using the OLYMPUS Master software

Connect the camera to your computer with the provided USB cable.

Use the provided USB cable to connect the computer’s USB port to the camera’s

multi-connector.

•

The location of the USB port varies with the computer. For details, refer to your computer’s

manual.

Set the camera’s power switch to ON.

•

The selection screen for the USB connection is displayed.

Press

to select [STORAGE]. Press the

button.

The computer recognizes the camera as a new

device.

Windows

•

When you connect the camera to the computer for the first

time, the computer automatically recognizes the camera.

Click “OK” when the message saying that the installation is completed appears.

The computer recognizes the camera as a “Removable Disk ”.

Macintosh

•

iPhoto is the default image management application for Mac OS. When you connect your

Olympus digital camera for the first time, iPhoto will start up automatically. Close iPhoto and

start OLYMPUS Master.

Notes

•

When the camera is connected to the computer, none of the camera buttons are functional.

Connecting the camera to a computer

Look for this

mark.

Smaller terminal

Term ina l

USB port

USB cable

Multi-connector

E-450_MASTER.fm Seite 98 Donnerstag, 16. April 2009 10:40 10

Using the OLYMPUS Master software

Windows

Double-click the “OLYMPUS Master 2” icon on the desktop.

Macintosh

Double-click the “OLYMPUS Master 2” icon in the “OLYMPUS Master 2” folder.

•

The browse window is displayed.

•

When OLYMPUS Master is started up for the first time after installation, the OLYMPUS Master

initial setting screen and user registration screen are displayed before the browse window.

Follow the on-screen instructions.

To exit OLYMPUS Master

Click “Exit” on any window.

•

OLYMPUS Master is exited.

Downloading and saving images

Click “Transfer Images” on the browse window, and

then click “From Camera” .

•

The window for selecting the pictures you want to transfer from

the camera is displayed. All the images in the camera are

displayed.

Select “New Album” and enter an album name.

Select the image files and click “Transfer Images”.

•

A window indicating that the download is complete is displayed.

Click “Browse images now”.

•

The downloaded images are displayed in the browse window.

Disconnecting the camera from your computer

Make sure that the card access lamp has stopped

blinking.

Start up the OLYMPUS Master software

Displaying camera images on a computer

Card access lamp

E-450_MASTER.fm Seite 99 Donnerstag, 16. April 2009 10:40 10

Using the OLYMPUS Master software

100

Prepare to remove the USB cable.

Windows

In the system tray, click the “Unplug or Eject Hardware”

icon .

Click on the pop-up message.

Click “OK” on the “Safe to Remove Hardware” window.

Macintosh

The trash icon changes to the eject icon when the

“Untitled” or “NO_NAME” icon on the desktop is dragged.

Drag and drop it on the eject icon.

Unplug the USB cable from the camera.

Notes

•

For Windows users:

When you click “Unplug or Eject Hardware”, a warning message may be displayed. In such

case, make sure that no image data is being downloaded from the camera, and that there are

no applications open that were accessing the camera image files. Close any such applications

and click “Unplug or Eject Hardware” again and then remove the cable.

E-450_MASTER.fm Seite 100 Donnerstag, 16. April 2009 10:40 10

Using the OLYMPUS Master software

101

Click the “Album” tab on the browse window and select

the album that you want to view.

•

The selected album image is displayed in the thumbnail area.

Double-click the still picture thumbnail that you want to

view.

•

OLYMPUS Master switches to the image edit window and the

picture is enlarged.

•

Click “Back” to return to the browse window.

Please take care that your battery is fully charged!

Make sure that your computer is connected to the Internet.

Plug the USB cable into the USB port on the computer.

Plug the other end of the USB cable into the camera’s multi-connector.

•

The camera turns on automatically.

•

The monitor turns on and the selection screen for the USB connection is displayed.

Select [STORAGE] and press the

button.

In the browse window, select “Camera”, then “Update Camera/Add Display

Language”.

•

The confirmation window for updating is displayed.

Click “OK”.

•

The updating the camera window is displayed.

Click “Add Language” in the updating

camera display.

•

The “Add Display Language of Camera” window

is displayed.

Click and select a language.

Click “Add”.

•

The new language is downloaded to your camera. Please

do not remove any cable or the battery while the camera

is processing.

Viewing still images

To increase the number of languages

Thumbnail

E-450_MASTER.fm Seite 101 Donnerstag, 16. April 2009 10:40 10

Using the OLYMPUS Master software

102

After the download procedure the camera display will show “OK”. You can remove

the cables and turn power off. After restarting the camera you will be able to choose

the new language from [

Your camera supports the USB Mass Storage Class. You can transfer images to a computer by

connecting the camera to the computer with the provided USB cable. This can be done even

without using OLYMPUS Master. The following operating systems are compatible with the USB

connection:

Windows : 2000 Professional/XP Home Edition/XP Professional/Vista

Macintosh : Mac OS X v10.3 or later

Notes

•

If your computer is running Windows Vista, select

[MTP]

in Step 3 on page 98 to use Windows

Photo Gallery.

•

Data transfer is not guaranteed in the following environments, even if your computer is equipped

with a USB port.

•

Computers with a USB port added by means of an extension card, etc.

•

Computers without a factory-installed OS and home-built computers

Transferring images to your computer without using

OLYMPUS Master

E-450_MASTER.fm Seite 102 Donnerstag, 16. April 2009 10:40 10

Shooting tips and maintenance

103

Shooting tips and maintenance

Tips before you start taking pictures

The camera does not turn on even when a battery is loaded

The battery is not fully charged

•

Charge the battery with the charger.

The battery is temporarily unable to function because of the cold

•

Battery performance declines in low temperatures, and the charge may not be sufficient to turn on the

camera. Remove the battery and warm it by putting it in your pocket for a while.

No picture is taken when the shutter button is pressed

The camera has turned off automatically

•

To save battery power, if there is no operation, the camera goes into sleep mode after a fixed period

of time and the camera stops operating. The camera activates again when you touch the shutter

button or any other button. The camera will turn off automatically if there is no further operation for 4

hours. The camera will not work until it is turned back on.

“SLEEP” (P. 86)

The flash is charging

•

When the flash is raised, the

symbol blinking in the super control panel or the viewfinder indicates

that the flash is charging. Wait for the blinking to stop, then press the shutter button.

Unable to focus

•

When the AF confirmation mark in the viewfinder is blinking, it indicates that the camera is unable to

focus using AF. Press the shutter button again.

Noise reduction is activated

•

When shooting night scenes, shutter speeds are slower and noise tends to appear in images. The

camera activates the noise-reduction process after shooting at slow shutter speeds. During which,

shooting is not allowed. You can set

[NOISE REDUCT.]

[OFF]

“Noise reduction” (P. 65)

The date and time has not been set

The camera is used with the settings at the time of purchase

•

The date and time of the camera is not set when purchased. Set the date and time before using the

camera.

“Setting the date/time” (P. 15)

The battery has been removed from the camera

•

The date and time settings will be returned to the factory default settings if the camera is left without

the battery for approximately 1 day. The settings will be canceled more quickly if the battery was only

loaded in the camera for a short time before being removed. Before taking important pictures, check

that the date and time settings are correct.

Shooting tips

Focusing on the subject

There are several ways to focus, depending on the subject.

AF target is not focused on the subject

•

Use focus lock to focus the AF target on the subject.

“Focus lock – If correct focus cannot be

obtained” (P. 54)

Other things instead of the subject are in focus on the respective AF targets

•

Set

[AF AREA]

and focus on the center of the image.

“AF target selection” (P. 53)

Shooting tips and information

E-450_MASTER.fm Seite 103 Donnerstag, 16. April 2009 10:40 10

Shooting tips and maintenance

104

The subject is moving quickly

•

Focus the camera on a point roughly the same distance away as the subject you want to shoot (by

pressing the shutter button halfway), and then recompose your picture and wait for the subject to

enter the frame.

Close up on the subject using macro lens

•

When using macro lens to close up on the subject, it is difficult to focus with AF when the

enlargement ratio of the subject is bigger. Set to manual focus (MF), rotate the focus ring and focus

manually.

“MF (manual focus)” (P. 52)

Taking pictures in low light conditions

•

The built-in flash can be set to function as an AF illuminator. The flash helps to focus in low-light

conditions in the AF mode when raised.

“Built-in flash shooting” (P. 68), “AF ILLUMINAT.” (P. 83)

Subjects that are difficult to focus on

It may be difficult to focus with auto focus in the following situations.

In any situation, focus on something with high contrast that is at the same distance as the

subject, determine the composition and shoot the picture.

Taking pictures without blurring

There are several factors that can cause the picture to blur.

The subject is too dark

•

Change the shutter speed to match the brightness of the subject. If the shutter speed is set low to

shoot a dark subject, blurring is likely to occur if the subject moves. In addition, when the flash is

turned off in

(Scene mode), the shutter speed becomes slower.

Mount the camera on a tripod. Using the remote control (optional) to close the shutter is also

effective for reducing blurring.

There are also ways to shoot with [q] (DIS MODE) under Y (Scene mode). As the ISO

sensitivity increases automatically, you can hand hold the camera and take pictures in low light

situations with the flash off.

The camera or your hand moves when pressing the shutter button

•

Press the shutter button gently or hold the camera securely with both hands.

•

You can avoid camera movement while pressing the shutter button by using self-timer or anti-shock.

“Self-timer shooting” (P. 56), “Anti-shock” (P. 58)

Taking pictures with less flash

When using auto flash, the flash will light up automatically when it is not bright enough and

camera blur is more likely to occur. If the subject is too far away, the flash may have no effect.

Here is how to take pictures without the flash in this type of situation.

Set

(Scene mode) to [

] (DIS MODE)

•

As the ISO sensitivity increases automatically, you can hand hold the camera and take pictures in low

light situations with the flash off.

Increase the ISO setting

•

Increase the value of the ISO setting. The image may become grainy.

“ISO sensitivity setting” (P. 50)

AF confirmation mark is

blinking.

These subjects are not

focused.

Subject with low contrast Excessively bright light

in center of frame

Subject with

repeated patterns

AF confirmation mark

lights up but the subject is

not focused.

Subjects at different

distances

Fast-moving subject Subject not inside

AF area

E-450_MASTER.fm Seite 104 Donnerstag, 16. April 2009 10:40 10

Shooting tips and maintenance

105

The picture is too grainy

Increasing the ISO sensitivity

•

When you increase the ISO setting, noise, which appears as spots of unwanted color or unevenness

in the color, can be introduced and give the picture a grainy appearance. This camera is equipped

with a function to allow shooting at high sensitivity while suppressing noise; however, increasing the

ISO sensitivity creates grainier pictures than when using a lower sensitivity.

“ISO sensitivity setting” (P. 50)

Image taken appears whitish

This may occur when the picture is taken in backlight or semi-backlight conditions. This is due

to a phenomenon called flare or ghosting. As far as possible, consider a composition where

strong light source is not taken in the picture. Flare may occur even when a light source is not

present in the picture. Use a lens hood to shade the lens from the light source. If a lens hood

does not have effect, use your hand to shade the lens from the light.

“Interchangeable lenses” (P. 115)

Taking pictures with the correct color

The reason why there are differences between the colors in a picture and the actual colors

taken and the actual color is the light source illuminating the subject.

[WB]

is the function that

allows the camera to determine the correct colors. Normally, the

[AUTO]

setting provides the

optimal white balance, but depending on the subject, it may be better to experiment with

changing the

[WB]

setting.

•

When the subject is in the shade on a sunny day

•

When the subject is illuminated by both natural light and indoor lighting, such as when near a window

•

When there is no white in the frame

g“Selecting the white balance” (P. 60)

Taking pictures of a white beach or snow scene

In normal cases, white subjects such as snow will appear darker than usual when the picture is

taken. There are several ways to capture the whiteness.

•

Adjust the exposure compensation toward

[+]

“Exposure compensation” (P. 48)

•

Use

[

]

(BEACH & SNOW) in

(Scene mode) to take the picture. It is most suitable for taking

pictures of the sea in a sunny day or snow-capped mountains.

“Mode dial” (P. 4)

•

Use

[

HI]

(Spot metering highlight control).

Press the shutter button halfway at the center of the viewfinder where you wish to highlight the

whiteness. The metered part at the center will be set to appear whiter. g“Changing the metering

mode” (P. 47)

•

Use the AE bracketing function to take the picture.

If you do not know the amount of exposure compensation, try using AE bracketing. The

compensation value changes a little every time you press the shutter button. If you set a larger

exposure compensation, you can change the compensation value either upwards or downwards

based on that value and shoot the picture. g“AE bracketing” (P. 49)

E-450_MASTER.fm Seite 105 Donnerstag, 16. April 2009 10:40 10

Shooting tips and maintenance

106

Taking pictures of a subject against backlight

If the background is too bright compared to the subject, the exposure will be affected at the

bright parts and the subject will appear darker. This is because the camera determines the

exposure from the brightness of the whole screen.

•

Set

[METERING]

[

]

(spot metering) to measure the exposure of the subject in the center of the

picture. To change the composition, place the subject in the center of the picture. While holding down

the

AEL

AFL

button, change the composition and press the shutter button.

“Changing the

metering mode” (P. 47)

•

Activate the flash, set the flash mode to

[

]

(fill-in flash) and shoot the picture. You can shoot a

subject against backlight without the face of the subject appearing dark.

[

]

(fill-in flash) is used for

shooting against backlight and under fluorescent and other artificial lighting.

“Flash mode

setting” (P. 66)

Image turns out too bright or too dark

When taking pictures in

mode or

mode, the displayed shutter speed or aperture setting

may blink. A blinking display means that the correct exposure cannot be obtained. If you take

the picture as is, the picture will appear too bright or too dark. If that happens, change the

aperture setting or shutter speed.

“Aperture priority shooting” (P. 43), “Shutter priority shooting” (P. 44), “Exposure warning

display” (P. 118)

Unknown bright dot(s) appear on the subject in the picture taken

This may be due to stuck pixel(s) on the image pickup device. Perform

[PIXEL MAPPING]

. If

the problem persists, repeat pixel mapping a few times.

“Pixel mapping – Checking the

image processing functions” (P. 112)

Additional shooting tips and information

Increasing the number of pictures that can be taken

The captured image will be recorded on the card. The following ways describe how to record

more images.

•

Change the record mode.

The size of an image varies with the record mode. When you are not sure of the available card

capacity, change the image mode and shoot the picture. The smaller the image size and the

higher the compression, the smaller the size of the image becomes. To make the file size small,

combine the image size and compression rate and register it with [K SET].

You can further reduce the number of pixels by setting

[PIXEL COUNT]

to fewer pixels for image

size

[

]

[

]

“Selecting the record mode” (P. 59), “

SET” (P. 88), “PIXEL COUNT” (P. 88)

•

Use a card with large capacity.

The number of recordable images varies with the capacity of the card. Use a card with large

capacity.

Using a new card

If you use a non-Olympus card or a card used for another application, such as for a computer,

the message

[CARD ERROR]

is displayed. To use this card with this camera, use the

[FORMAT]

function to format the card.

“Formatting the card” (P. 114)

E-450_MASTER.fm Seite 106 Donnerstag, 16. April 2009 10:40 10

Shooting tips and maintenance

107

Extending the useful life of the battery

Performing any of the following operations when not actually taking pictures can deplete the

battery power.

•

Repeatedly pressing the shutter button halfway

•

Repeatedly playing back the captured images over a long period of time

•

Using the live view function over a long period

To save battery power, turn off the camera whenever it is not in use.

Functions that cannot be selected from menus

Some items may not be selectable from the menus when using the arrow pad.

•

Items that cannot be set with the current shooting mode

•

Items that cannot be set because of an item that has already been set:

Combination of [j] and [NOISE REDUCT.], etc.

Cannot use the Imager AF

Imager AF is available only when using compatible lenses. For the latest information about

Olympus lenses compatible with Imager AF, visit the Olympus website.

Selecting the optimal record mode

Record modes are divided into 2 main types: RAW and JPEG. RAW records without reflecting

the settings for white balance, contrast, etc. on the images themselves. JPEG records as

images that reflect these settings. JPEG also compresses images to reduce the file size when

recording them. For JPEG, you can register four combinations of images sizes (

) and

compression rates (SF, F, N, B) from the 12 total combinations available. The higher the

compression rate, the grainier the image will appear when enlarged during display. A rough

guide for selection is shown below.

To make fine-adjustments of the shooting settings on the computer

•

[RAW]

To print large images on A3/A4 paper/To edit and process images on a computer

•

Images size

and compression rate SF, F, N, or B

To print postcard-size images

•

Images size

and compression rate SF, F, N, or B

To send as an e-mail attachment or post on a web site

•

Images size

and compression rate SF, F, N, or B

“Record mode and file size/number of storable still pictures” (P. 121)

To restore functions to their settings at the time of purchase

•

The settings are saved even when the power is switched off.

•

To return to the factory default settings, set

[RESET]

under

[CUSTOM RESET]

. You can

[RESET1]

[RESET2]

under

[CUSTOM RESET]

“Resetting to the

factory default settings” (P. 30)

E-450_MASTER.fm Seite 107 Donnerstag, 16. April 2009 10:40 10

Shooting tips and maintenance

108

Confirming the exposure when it is difficult to view the monitor outdoors

The monitor may be difficult to view and the exposure difficult to confirm when shooting

outdoors.

During live view, press the

INFO

button repeatedly to display the histogram.

The following shows you how to read the histogram display easily.

How to read the histogram

If the graph has many peaks around here, the image will appear

mostly black.

If the graph has many peaks around here, the image will appear

mostly white.

The part indicated in green in the histogram shows the luminance

distribution within the spot metering area.

“Switching the information display” (P. 40)

Playback tips

Understanding the settings and other information of pictures taken

Play back a picture, and press the

INFO

button. Press the button repeatedly to change the

amount of information displayed.

“Information display” (P. 76)

Viewing pictures on a computer

Viewing the entire picture on a computer screen

The size of the picture displayed on a computer screen changes depending on the computer

settings. When the monitor setting is 1024 x 768 and you are using Internet Explorer to view a

picture with an image size of 2048 x 1536 at 100%, the entire picture cannot be viewed without

scrolling. There are several ways you can view the entire picture on the computer screen.

View the picture using image browsing software

•

Install the OLYMPUS Master software from the provided CD-ROM.

Change the monitor setting

•

The icons on the computer desktop may be rearranged. For details of changing the settings on your

computer, refer to the computer’s manual.

To view recorded images in RAW

Install the OLYMPUS Master software from the provided CD-ROM. You can use the RAW

development function in OLYMPUS Master to develop the RAW image in the camera setting

used during shooting, as well as change detailed settings such as white balance and contrast.

E-450_MASTER.fm Seite 108 Donnerstag, 16. April 2009 10:40 10

Shooting tips and maintenance

109

Error codes

Viewfinder indications Monitor indication Possible cause Corrective action

Normal indication

NO CARD

The card is not

inserted, or it cannot be

recognized.

Insert a card or insert a

different card.

CARD ERROR

There is a problem with

the card.

Insert the card again.

If the problem persists,

format the card. If the

card cannot be

formatted, it cannot be

used.

WRITE PROTECT

Writing to the card is

prohibited.

The card has been set

to read-only setting with

the computer.

Reset the card with the

computer.

No indication

CARD FULL

The card is full. No

more pictures can be

taken or no more

information such as

print reservation can be

recorded.

Replace the card or

erase unwanted

pictures.

Before erasing,

download important

images to a PC.

There is no space in the

card and print

reservation or new

images cannot be

recorded.

Replace the card or

erase unwanted

pictures.

Before erasing,

download important

images to a PC.

No indication

xD-Picture Cards

cannot be read or is not

formatted.

•

Select

[xD CARD

CLEAN]

, press the

button and turn off the

camera. Remove the

card and wipe dry the

metallic surface with a

soft, dry cloth.

•

Select

[FORMAT]



[YES]

, and then press

the

button to

format the card.

Formatting the card

erases all data on the

card.

No indication

NO PICTURE

There are no pictures

on the card.

The card contains no

pictures.

Record pictures and

play back.

xD CARD CLEAN

FORMAT

Clean the terminal of the

xD card with the dry cloth.

CARD SETUP

SELECT GO

E-450_MASTER.fm Seite 109 Donnerstag, 16. April 2009 10:40 10

Shooting tips and maintenance

110

No indication

PICTURE ERROR

The selected picture

cannot be displayed for

playback due to a

problem with this

picture. Or the picture

cannot be used for

playback on this

camera.

Use image processing

software to view the

picture on a PC.

If that cannot be done,

the image file is

damaged.

No indication

THE IMAGE CANNOT

BE EDITED

Pictures taken with

another camera cannot

be edited on this

camera.

Use image processing

software to edit the

picture.

No indication

Internal camera

temperature is too high.

Please wait for cooling

before camera use.

Extended use of live

view or sequential

shooting has increased

the internal

temperature of the

camera.

Wait a moment for the

camera to turn off

automatically. Allow the

internal temperature of

the camera to cool

before resuming

operations.

CARD-COVER OPEN

The card cover is open. Close the card cover.

No indication

BATTERY EMPTY

The battery is drained. Charge the battery.

No indication

NO CONNECTION

The camera is not

connected to the

computer or printer

correctly.

Disconnect the camera

and connect it again

correctly.

No indication

NO PAPER

There is no paper in the

printer.

Load some paper in the

printer.

No indication

NO INK

The printer has run out

of ink.

Replace the ink

cartridge in the printer.

No indication

JAMMED

The paper is jammed. Remove the jammed

paper.

Viewfinder indications Monitor indication Possible cause Corrective action

E-450_MASTER.fm Seite 110 Donnerstag, 16. April 2009 10:40 10

Shooting tips and maintenance

111

Cleaning and storing the camera

Cleaning the camera

Turn off the camera and remove the battery before cleaning the camera.

Exterior:

•

Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water and wring

well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used the

camera at the beach, use a cloth soaked in clean water and well wrung.

Monitor and viewfinder:

•

Wipe gently with a soft cloth.

Lens, mirror and focusing screen:

•

Blow dust off the lens, mirror and focusing screen with a commercially available blower. For the lens,

wipe gently with a lens cleaning paper.

Storage

•

When not using the camera for a prolonged period, remove the battery and card. Store the

camera in a cool, dry place that is well ventilated.

•

Insert the battery periodically and test the camera’s functions.

Cleaning and checking the image pickup device

This camera incorporates a dust reduction function to keep dust from getting on the image

pickup device and to remove any dust or dirt from the image pickup device surface with

ultrasonic vibrations. Dust reduction is activated when the power switch is set to ON and when

starting and stopping live view. The dust reduction function operates at the same time as the

pixel mapping, which checks the image pickup device and image processing circuitry. Since

dust reduction is activated every time the camera’s power is turned on, the camera should be

held upright for the dust reduction function to be effective. The SSWF indicator blinks while dust

reduction is working.

“SSWF indicator” (P. 14)

No indication SETTINGS CHANGED

The printer’s paper

cassette has been

removed or the printer

has been manipulated

while making settings

on the camera.

Do not manipulate the

printer while making

settings on the camera.

No indication

PRINT ERROR

There is a problem with

the printer and/or

camera.

Turn off camera and

printer. Check the

printer and remedy any

problems before turning

the power on again.

No indication

CANNOT PRINT

Pictures recorded on

other cameras may not

be printed on this

camera.

Use a personal

computer to print.

Camera maintenance

Viewfinder indications Monitor indication Possible cause Corrective action

E-450_MASTER.fm Seite 111 Donnerstag, 16. April 2009 10:40 10

Shooting tips and maintenance

112

Notes

•

Do not use strong solvents such as benzene or alcohol, or a chemically treated cloth.

•

Avoid storing the camera in places where chemicals are treated, in order to protect the camera

from corrosion.

•

Mold may form on the lens surface if the lens is left dirty.

•

Check each part of the camera before use if it has not been used for a long time. Before taking

important pictures, be sure to take a test shot and check that the camera works properly.

Cleaning mode – Removing dust

If dust or dirt gets on the image pickup device, black dots may appear in the picture. Contact

your Olympus Authorized Service Center to have the image pickup device physically cleaned.

The image pickup device is a precision device and is easily damaged. When cleaning the

image pickup device yourself, be sure to follow the instructions below. If power runs out during

cleaning, the shutter will close, which may cause the shutter curtain and mirror to break. Keep

an eye on the remaining battery power.

Remove the lens from the camera, and set the

power switch to ON.



[

]



[

]



[CLEANING MODE]

Press

, then press the

button.

•

The camera enters the cleaning mode.

Press the shutter button all the way.

•

The mirror goes up and the shutter curtain opens.

Clean the image pickup device.

•

Carefully blow off any dust on the surface of the image

pickup device by using a mechanical blower (commercially

available).

Be careful not to catch the mechanical blower in the shutter curtain when turning

the power off to finish cleaning.

•

If the camera turns off, the shutter curtain closes, causing the mirror to fall.

Notes

•

Be careful not to let the mechanical blower (commercially available) touch the image pickup

device. If the blower touches the image pickup device, the image pickup device will be

damaged.

•

Never put the mechanical blower behind the lens mount. If the power turns off, the shutter

closes, breaking the shutter curtain.

•

Do not use anything other than the mechanical blower. If high-pressure gas is sprayed onto the

image pickup device, it will freeze on the image pickup device’s surface, damaging the image

pickup device.

Pixel mapping – Checking the image processing functions

The pixel mapping feature allows the camera to check and adjust the image pickup device and

image processing functions. After using the monitor or taking continuous shots, wait for at least

one minute before using the pixel mapping function to ensure that it operates correctly.



[

]



[PIXEL MAPPING]

Press

, then press the

button.

•

The

[BUSY]

bar is displayed when pixel mapping is in progress. When pixel mapping is

finished, the menu is restored.

Notes

•

If you accidentally turn the camera off during pixel mapping, start again from Step 1.

CLEANING MODE

CANCEL SELECT

E-450_MASTER.fm Seite 112 Donnerstag, 16. April 2009 10:40 10

Information

113

Information

Usable cards

“Card” in this manual refers to a recording medium. This camera can use CompactFlash,

Microdrive or xD-Picture Card (optional).

Precautions when using a Microdrive

A Microdrive is a medium that uses a compact hard disk drive. Because the disk drive rotates, a

Microdrive is not as resistant to vibration or impact as other cards. Special care is needed when

using a Microdrive (especially during recording and playback) to make sure the camera is not

subjected to shock or vibrations. Be sure to read the following precautions before using a

Microdrive.

Also, refer to the manuals provided with your Microdrive.

•

Be very careful when putting the camera down during recording. Place it gently on a firm

surface.

•

Do not use the camera in places subject to vibrations or excessive shock, such as at a

construction site or in a car while driving along a bumpy road.

•

Do not take a Microdrive close to areas where it may be exposed to strong magnetism.

•

The Microdrive may not function correctly under low air pressure conditions, like in altitudes of

3,000 m (9,843 ft.) and higher.

Notes

•

The data in the card will not be erased completely even after formatting the card or deleting the

data. When discarding, destroy the card to prevent leakage of personal information.

Card basics

CompactFlash

A CompactFlash is a large-

capacity solid state flash

memory card. You can use

commercially available cards.

Microdrive

A Microdrive is a medium that uses

a large-capacity compact hard disk

drive. You can use a Microdrive that

supports CF+Type II (CompactFlash

extension standard).

xD-Picture Card

An xD-Picture Card is a

recording medium used

mainly in compact cameras.

E-450_MASTER.fm Seite 113 Donnerstag, 16. April 2009 10:40 10

Information

114

Formatting the card

Non-Olympus cards or cards formatted on a computer must be formatted with the camera

before they can be used.

All data stored on the card, including protected images, is erased when the card is formatted.

When formatting a used card, confirm there are no images that you still want to keep on the card.



[

]



[CARD SETUP]

Use

to select [FORMAT], then press the

button.

Use

to select [YES], then press the

button.

•

Formatting is performed.

When inserting cards into the two card slots:

Select the card to be used in

[CF/xD]

“CF/xD” (P. 90)

Use the single Olympus lithium-ion battery (BLS-1).

Other batteries cannot be used.

The camera’s power consumption varies widely with usage and other conditions.

As the following consume a lot of power even without shooting, the battery will be drained

quickly.

• Performing auto focus repeatedly by pressing the shutter button halfway in shooting

mode.

• Using live view.

• Displaying images on the LCD monitor for a prolonged period.

• When connected to a computer or printer.

When using a drained battery, the camera may turn off without the low battery warning being

displayed.

The battery will not be fully charged at the time of purchase. Charge the battery using the

designated charger (BCS-1) before use.

The normal charging time of the provided rechargeable battery is approximately 3 hours

30 minutes (estimated).

Do not use chargers other than the one designated.

The charger can be used in most home electrical sources within the range of 100 V to 240 V

AC (50/60Hz) around the world. However, depending on the country or area you are in, the

AC wall outlet may be shaped differently and the charger may require a plug adapter to

match the wall outlet. For details, ask at your local electrical shop or travel agent.

Do not use commercially available travel adaptors as the charger may malfunction.



TIPS

Battery and charger

Using your charger abroad

ALL ERASE

FORMAT

CARD SETUP

CANCEL SELECT

E-450_MASTER.fm Seite 114 Donnerstag, 16. April 2009 10:40 10

Information

115

Select the lens that you want to shoot with.

Use a specified Four Thirds lens (Four Thirds mount). When a non-specified lens is used, auto

focus and light metering will not function correctly. In some cases, other functions may not work

either.

Four Thirds mount

Developed by Olympus as the lens mount standard for the Four Thirds system. These all-new

interchangeable lenses featuring the Four Thirds mount were developed from the ground up

based on optic engineering exclusively for digital cameras.

ZUIKO DIGITAL interchangeable lens

Four Thirds system interchangeable lens are designed to withstand rigorous professional use.

The Four Thirds system makes it possible for a fast lens to be compact and lightweight as well.

Focal length and depth of field of Four Thirds system lenses

When compared to 35-mm cameras, Four Thirds system cameras achieve different effects at

the same focal length and aperture.

Focal length

At the same focal length of a 35-mm camera, a Four Thirds system camera can achieve a

focal length equivalent to twice that of a 35-mm camera. This enables the design of compact

telephoto lenses. A 14–50 mm Four Thirds system lens, for example, is equivalent to

a 28–100 mm lens for a 35-mm camera.

•

When the image angle of Four Thirds system lens is converted to that of a 35-mm camera, the

perspective is the same as that of a 35-mm camera.

Depth of Field

A Four Thirds system camera can achieve a depth of field equivalent to two times deeper than

that of a 35-mm camera. This enables more light to enter through the aperture. A Four Thirds

system lens with f2.0 brightness, for example, is equivalent to f4.0 when converted to the

aperture of a 35-mm camera.

•

You can achieve the same amount of background blur as if you were using a 35-mm camera.

Notes

•

When you attach or remove the body cap and lens from the camera, keep the lens mount on the

camera pointed downward. This helps prevent dust and other foreign matter from getting inside

the camera.

•

Do not remove the body cap or attach the lens in dusty places.

•

Do not point the lens attached to the camera toward the sun. This may cause the camera to

malfunction or even ignite due to the magnifying effect of sunlight focusing through the lens.

•

Be careful not to lose the body cap and rear cap.

•

Attach the body cap to the camera to prevent dust from getting inside when no lens is attached.

Interchangeable lenses

E-450_MASTER.fm Seite 115 Donnerstag, 16. April 2009 10:40 10

Information

116

ZUIKO DIGITAL lens specifications



Names of parts

Hood mount section

Filter mount thread

Zoom ring

Focus ring

Mount index

Electrical contacts

Front cap

Rear cap

Lens hood

•

Use the hood when shooting a backlit subject.

•

The lens hood cannot be attached to the 17.5–45 mm lens.



Attaching the hood



Storing the hood

E-450_MASTER.fm Seite 116 Donnerstag, 16. April 2009 10:40 10

Information

117



Main Specifications

Can be used with the optional EX-25 extension tube under the following conditions.

The focus adjustment when EX-25 is used will be MF.



Storage Precautions

•

Clean the lens after use. Remove dust and dirt on the surface of the lens with a blower brush

or brush. Use commercially available lens cleaning paper to remove the dirt on the lens. Do

not use organic solvents.

•

Always cap the lens and store it when it is not used.

•

Do not store in an area with insect repellent.

Notes on Shooting

•

Edges of pictures may be cut off if more than one filter is used or if a thick filter is used.

Items 17.5–45 mm 14–42 mm 40–150 mm 25 mm

Mount FOUR THIRDS mount

Focal length 17.5–45 mm 14–42 mm 40–150 mm 25 mm

Max. aperture f3.5–5.6 f3.5–5.6 f4–5.6 f2.8

Image angle 63°–27° 75°–29° 30°–8.2° 47°

Lens configuration

7 groups,

7 lenses

8 groups,

10 lenses

9 groups,

12 lenses

4 groups,

5 lenses

Multilayer film coating (partially single layered)

Iris control f3.5–22 f3.5–22 f4–22 f2.8–22

Shooting range 0.28 m–

)

0.25 m–

)

0.9 m–

)

0.2 m–

)

Focus adjustment AF/MF switching

Weight (excluding hood

and cap)

210 g 190 g 220 g 95 g

Dimensions

(Max. diameter x overall

length)

71 x 70 mm Ø

65.5 x 61 mm Ø

65.5 x 72 mm Ø

64 x 23.5 mm

Lens hood mount

Bayonet Screw-in type

Filter mount thread

diameter

52 mm 58 mm 43 mm

Lens, focal length Shooting range

Magnification

( ): Calculated based on 35 mm film

camera

17.5–45 mm

17.5 mm

Shooting is not possible since subjects cannot be brought into focus at this

focal length.

28 mm 15.1 cm–15.9 cm 0.89–1.16x (1.78–2.32x)

45 mm 18.4 cm–22.4 cm 0.57–0.91x (1.14–1.82x)

14–42 mm

14 mm

Shooting is not possible since subjects cannot be brought into focus at this

focal length.

25 mm 13.3 cm 1.02x (2.04x)

42 mm 16.2 cm–17.3 cm 0.61–0.69x (1.22–1.38x)

40–150 mm

40 mm 19.0 cm–20.4 cm 0.61–0.70x (1.22–1.40x)

80 mm 28.0 cm–40.6 cm 0.32–0.48x (0.64–0.96x)

150 mm 48.0 cm–118.8 cm 0.17–0.39x (0.34–0.78x)

25 mm 25 mm 11.1 cm–11.2 cm 0.98–1.17x (1.96–2.34x)

E-450_MASTER.fm Seite 117 Donnerstag, 16. April 2009 10:40 10

Information

118

In the

mode, the camera is programmed such that the aperture value and shutter speed are

automatically selected according to the subject’s brightness as shown below. The program line

diagram varies with the type of lens mounted.

If the optimum exposure cannot be obtained when pressing the shutter button halfway, the

display will blink in the viewfinder and on the super control panel.

Program line diagram (

mode)

When using the

14–42 mm f3.5–5.6

zoom lens

(focal length: 14 mm,

ISO100)

Program shift

Exposure warning display

Shooting

mode

Warning display

example (blinking)

Status Action

The subject is too dark.

•

Increase the ISO sensitivity.

•

Use the flash.

The subject is too bright.

•

Decrease the ISO sensitivity.

•

Use a commercially available ND

filter (for adjusting the amount of

light).

The subject is underexposed.

•

Decrease the aperture value.

•

Increase the ISO sensitivity.

The subject is overexposed.

•

Increase the aperture value.

•

Decrease the ISO sensitivity or use

a commercially available ND filter

(for adjusting the amount of light).

Shutter speed

Aperture value

E-450_MASTER.fm Seite 118 Donnerstag, 16. April 2009 10:40 10

Information

119

* The aperture value at the moment when its indication blinks varies with the lens type and focal length of

the lens.

The subject is

underexposured.

•

Set the shutter speed slower.

•

Increase the ISO sensitivity.

The subject is overexposured.

•

Set the shutter speed faster.

•

Decrease the ISO sensitivity or use

a commercially available ND filter

(for adjusting the amount of light).

Flash modes that can be set by shooting mode

Shooting

mode

Super control

panel screen

display

Flash mode

Conditions

to timing

Conditions to fire the

flash

Shutter

speed

restrictions

AUTO

Auto flash

1st curtain

Fires automatically in

dark/backlit

conditions

1/60 sec. –

1/180 sec.

Auto flash

(red-eye reduction)

Fill-in flash Always fires

60 sec. –

1/180 sec.

Flash off

kk k

SLOW

Slow synchronization

(red-eye reduction)

1st curtain

Fires automatically in

dark/backlit

conditions

60 sec. –

1/180 sec.

SLOW

Slow synchronization

(1st curtain)

SLOW2

Slow synchronization

(2nd curtain)

2nd curtain

FULL

Manual flash

(FULL)

1st curtain Always fires

1/4

Manual flash (1/4)

1/16

Manual flash (1/16)

1/64

Manual flash (1/64)

Fill-in flash

(red-eye reduction)

Flash off

kk k

Shooting

mode

Warning display

example (blinking)

Status Action

E-450_MASTER.fm Seite 119 Donnerstag, 16. April 2009 10:40 10

Information

120

When the flash is set to the Super FP mode, it detects backlight with longer duration than for normal flash

before emitting light.

“Super FP flash” (P. 71)

AUTO

cannot be set in NIGHT+PORTRAIT mode.

The higher the color temperature, the richer

the light in bluish tones and the poorer in

reddish; the lower the color temperature,

the richer the light in reddish tones and the

poorer in bluish. The spectral balance of

different white light sources is rated

numerically by color temperature – concept

of physics expressed using the Kelvin (K)

temperature scale. The color of sunlight

and other natural light sources and the

color of a light bulb and other artificial light

sources can be expressed in terms of color

temperature.

It follows, then, that the color temperatures

of fluorescent lights make them unsuitable

as artificial light sources. There are gaps in the hues from the color temperatures of fluorescent

light. If these differences in hue are small, they can be calculated with color temperature and

this is called correlated color temperature.

The 4000K, 4500K and 6600K preset settings in this camera are correlated color temperatures,

and should not be considered strictly as color temperatures. Use these settings for shooting

conditions under fluorescent lights.

2nd CURTAIN

Fill-in flash/Slow

synchronization

(2nd curtain)

2nd curtain

Always fires

60 sec. –

1/180 sec.

FULL

Manual flash

(FULL)

1st curtain

1/4

Manual flash (1/4)

1/16

Manual flash (1/16)

1/64

Manual flash (1/64)

White balance color temperature

Shooting

mode

Super control

panel screen

display

Flash mode

Conditions

to timing

Conditions to fire the

flash

Shutter

speed

restrictions

•

The color temperatures for each light source

indicated in the above scale are approximate.

Shade on clear day

Daylight fluorescent

Overcast

Clear day

Intense white

fluorescent

Hot white light bulb

Candle frame

White fluorescent

More Red

More Blue

E-450_MASTER.fm Seite 120 Donnerstag, 16. April 2009 10:40 10

Information

121

The file size in the table is approximate.

Notes

•

The number of remaining pictures may change according to the subject or factors like whether

print reservations have been made or not. In certain instances, the number of remaining pictures

displayed on the viewfinder or the LCD monitor does not change even when you take pictures or

stored images are erased.

•

The actual file size varies according to the subject.

•

The maximum number of storable still pictures displayed on the monitor is 9999.

Record mode and file size/number of storable still pictures

Record

mode

Number of pixels

(PIXEL COUNT)

Compression

File

format

File size

(MB)

Number of

storable still

pictures (with 1GB

xD-Picture Card)

RAW

3648 x 2736

Loss-less

compression

ORF Approx. 11 91

SF 1/2.7

JPEG

Approx. 6.8 147

F 1/4 Approx. 4.7 211

N 1/8 Approx. 2.2 460

B 1/12 Approx. 1.5 687

3200 x 2400

1/2.7 Approx. 5.3 187

F 1/4 Approx. 3.7 267

N 1/8 Approx. 1.7 597

B 1/12 Approx. 1.1 888

2560 x 1920

1/2.7 Approx. 3.6 280

F 1/4 Approx. 2.2 466

N 1/8 Approx. 1.1 927

B 1/12 Approx. 0.7 1361

1600 x 1200

1/2.7 Approx. 1.3 799

F 1/4 Approx. 0.8 1163

N 1/8 Approx. 0.5 2284

B 1/12 Approx. 0.3 3198

1280 x 960

1/2.7 Approx. 0.8 1230

F 1/4 Approx. 0.5 1776

N 1/8 Approx. 0.3 3366

B 1/12 Approx. 0.2 4920

1024 x 768

1/2.7 Approx. 0.5 1881

F 1/4 Approx. 0.4 2665

N 1/8 Approx. 0.2 4920

B 1/12 Approx. 0.1 7107

640 x 480

1/2.7 Approx. 0.2 4569

F 1/4 Approx. 0.2 6396

N 1/8 Approx. 0.1 10661

B 1/12 Approx. 0.1 12793

E-450_MASTER.fm Seite 121 Donnerstag, 16. April 2009 10:40 10

Information

122

*1 9

Can be registered. k: Cannot be registered.

Includes anti-shock.

Functions that can be registered in Custom Reset Settings

Function

Custom reset

setting

registration

Function

Custom reset

setting

registration

Shooting mode

k 8 9

F 9

SLEEP

BACKLIT LCD

AF MODE

USB MODE

AF AREA

LIVE VIEW BOOST

AE BKT

9 g

FACE DETECT 9

PICTURE MODE

FRAME ASSIST

GRADATION

ISO-AUTO SET

K 9

ISO-AUTO

NOISE REDUCT.

AEL Metering

BULB TIMER

> 9 w

F 9

METERING

AUTO POP UP

ISO

ALL

> k

NOISE FILTER

COLOR SPACE

Flash mode

9 K

SET

RC MODE

PIXEL COUNT

w 9

RAW+JPEG ERASE

AF ILLUMINAT.

FILE NAME

FOCUS RING

dpi SETTING

RESET LENS

CLEANING MODE

BULB FOCUSING

k X k

LIVE VIEW AF MODE

CF/xD

DIAL FUNCTION

9 s k

DIAL DIRECTION

9 W k

AEL/AFL

VIDEO OUT

AEL/AFL MEMO

REC VIEW

FUNCTION

PIXEL MAPPING

FUNCTION

FIRMWARE

E-450_MASTER.fm Seite 122 Donnerstag, 16. April 2009 10:40 10

Information

123

Shooting Menu

Menu directory

Tab Function Setting

Ref.

page

CARD SETUP ALL ERASE/FORMAT

P. 8 2

P. 11 4

CUSTOM RESET

RESET

P. 3 0RESET1 SET/RESET

RESET2 SET/RESET

PICTURE MODE

VIVID/

NATURAL

MUTED/

PORTRAIT/

MONOTONE

P. 6 3

GRADATION AUTO/NORMAL

/HIGH KEY/LOW KEY P. 64

RAW/

N/RAW+

F/RAW+

N/RAW+

RAW+

P. 5 9

AUTO

A –7 – +7, G –7 – +7

P. 6 0

5300K

A –7 – +7, G –7 – +7

7500K

A –7 – +7, G –7 – +7

6000K

A –7 – +7, G –7 – +7

3000K

A –7 – +7, G –7 – +7

4000K

A –7 – +7, G –7 – +7

4500K

A –7 – +7, G –7 – +7

6600K

A –7 – +7, G –7 – +7

5500K

A –7 – +7, G –7 – +7

CWB 2000K – 14000K

ISO AUTO

/100–1600 P. 50

NOISE REDUCT. OFF/ON/AUTO

P. 6 5

NOISE FILTER OFF/LOW/STANDARD

/HIGH P. 65

METERING

ESP + AF/ESP

P. 4 7

RC MODE OFF

/ON P. 71

–3.0 – 0.0

– +3.0 P. 69

AF MODE S-AF

/C-AF/MF/S-AF+MF/C-AF+MF P. 51

AF AREA AUTO

P. 5 3

ANTI-SHOCK

OFF

/1SEC – 30SEC P. 58

AE BKT OFF

/3F 0.3EV/3F 0.7EV/3F 1.0EV P. 49

Factory default setting

E-450_MASTER.fm Seite 123 Donnerstag, 16. April 2009 10:40 10

Information

124

Playback Menu

Custom Menu 1

Tab Function Setting

Ref.

page

m K

P. 7 7

OFF/ON

P. 7 7

EDIT

RAW DATA EDIT

P. 7 8

JPEG EDIT

SHADOW ADJ/REDEYE FIX/

BLACK & WHITE/SEPIA/SATURATION/

P. 9 1

COPY ALL YES/NO P. 80

RESET PROTECT YES/NO P. 81

Factory default setting

Tab Function Setting

Ref.

page

AF/MF P. 8 3

AF ILLUMINAT. OFF/ON

P. 8 3

FOCUS RING

P. 8 3

RESET LENS OFF/ON

P. 8 3

BULB FOCUSING OFF/ON

P. 8 3

LIVE VIEW AF MODE AF SENSOR/HYBRID AF/IMAGER AF

P. 3 7

BUTTON/DIAL P. 83

DIAL FUNCTION

P %

P. 8 3

FNo.

SHUTTER

/FNo.

DIAL DIRECTION DIAL1

/DIAL2 P. 84

AEL/AFL

S-AF

mode1

/mode2/mode3

P. 8 4C-AF mode1/mode2

/mode3/mode4

MF mode1

/mode2/mode3

AEL/AFL MEMO OFF

/ON P. 85

FUNCTION

Fn FACE DETECT

/PREVIEW/OFF/

LIVE PREVIEW/TEST PICTURE

P. 8 5

FUNCTION

/AF AREA/AF MODE/WB/METERING/ISO

P. 8 5

DISP/

/PC P. 8 6

OFF/ON

P. 8 6

SLEEP OFF/1 MIN

/3 MIN/5 MIN/10 MIN P. 86

BACKLIT LCD 8 SEC

/30 SEC/1 MIN/HOLD P. 86

USB MODE AUTO

/STORAGE/MTP/CONTROL/

EASY/

CUSTOM P. 86

LIVE VIEW BOOST OFF

/ON P. 87

FACE DETECT OFF

/ON

P. 3 9

P. 8 7

FRAME ASSIST OFF*/GRID/GOLDEN SECTION/SCALE P. 87

Factory default setting

E-450_MASTER.fm Seite 124 Donnerstag, 16. April 2009 10:40 10

Information

125

Custom Menu 2

EXP/

/ISO P. 8 7

ISO-AUTO SET 100–1600 (400

)P.87

ISO-AUTO

/ALL P. 87

AEL Metering AUTO

HI/

SH P. 87

BULB TIMER

P. 8 7

CUSTOM P. 8 7

OFF

/ON P. 87

AUTO POP UP OFF/ON

P. 8 8

/COLOR/WB P. 88

ALL

ALL SET A –7 – +7 G –7 – +7

P. 8 8

ALL RESET YES/NO

COLOR SPACE sRGB

/AdobeRGB P. 88

SET

–

SF/F/N/B P. 88

PIXEL COUNT

iddle

3200 x 2400/2560 x 1920

1600 x 1200

P. 8 8

mall 1280 x 960

/1024 x 768/640 x 480

RECORD/ERASE P. 89

RAW+JPEG ERASE JPEG/RAW/RAW+JPEG

P. 8 9

FILE NAME AUTO

/RESET P. 89

dpi SETTING AUTO

/CUSTOM P. 89

UTILITY P. 11 2

CLEANING MODE

P. 11 2

Factory default setting

Tab Function Setting

Ref.

page

X k

P. 1 5

CF/xD CF

/xD P. 90

s j

–7 – +7

–7 – +7 P. 90

1P.90

VIDEO OUT

1P.90

REC VIEW OFF/AUTO

/1SEC – 20SEC (5SEC

)P.90

PIXEL MAPPING

P. 112

FIRMWARE

P. 9 0

Factory default setting

Settings differ depending on the region where the camera is purchased.

Tab Function Setting

Ref.

page

E-450_MASTER.fm Seite 125 Donnerstag, 16. April 2009 10:40 10

Information

126

(Aperture Priority) Mode

You set the aperture yourself and the camera automatically varies the shutter speed so that the

picture is taken with the correct exposure.

AE (Automatic Exposure)

The camera’s built-in exposure meter automatically sets the exposure. The 3 AE modes

available on this camera are

mode, in which the camera selects both the aperture and

shutter speed,

mode, in which the user selects the aperture and the camera sets the shutter

speed, and

mode, in which the user selects the shutter speed and the camera sets the

aperture. In

mode, the user selects both the aperture and the shutter speed.

Aperture

The adjustable lens opening which controls the amount of light that enters the camera. The

larger the aperture, the shorter the depth of field and the fuzzier the background. The smaller

the aperture, the greater the depth of field and the sharper the background. Aperture is

measured in f/stops. Larger aperture values indicate smaller apertures, and smaller aperture

values indicate larger apertures.

AUTO mode

Program AE mode (see “

(Program) Mode”). In addition, this mode features automatic flash

pop up when shooting in low-light conditions.

Center weighted averaging metering

A light metering mode or technique that uses an average of the center and periphery of the

image area but is biased toward the information at the center of the image area. This method is

best used when the brightness of the center and periphery of the image area does not vary

greatly. See also digital ESP metering and spot metering.

Color space

A model that describes colors using more than three coordinates. Color spaces such as sRGB,

Adobe RGB are occasionally used for encoding/reproducing colors.

Color temperature

The spectral balance of different white light sources is rated numerically by color temperature –

a concept of theoretical physics that, with incandescent lighting, corresponds roughly to the

absolute lamp filament temperature, expressed on the Kelvin (K) temperature scale. The higher

the color temperature, the richer the light in bluish tones and the poorer in reddish; the lower the

color temperature, the richer the light in reddish tones and the poorer in bluish. You may

encounter difficulties with color reproduction when shooting indoors under fluorescent lighting,

or where sunlight and fluorescent lighting are both present. Your camera is provided with a

white balance adjustment feature that you can use to compensate for the odd effects of

combinations of color you may occasionally see in your pictures.

Compression rate

Compression is a method of reducing file size by abbreviating some contents of data, and

compression rate denotes the amount of compression. The actual effect of the selected

compression rate could vary with the content of the image. The numbers for the compression

rate selected with this camera provide only a general scale for reference and are not precise

measurements.

DCF (Design rule for Camera File system)

A standard for image files by the Japan Electronics and Information Technology Industries

Association (JEITA).

Depth of Field

Depth of Field refers to the distance from the nearest to the furthest point of perceived “sharp”

focus in a picture.

Glossary

E-450_MASTER.fm Seite 126 Donnerstag, 16. April 2009 10:40 10

Information

127

Digital ESP (Electro-Selective Pattern) Light Metering

This determines the exposure by splitting the image into 49 areas and metering and calculating

the light levels in each area.

DPOF (Digital Print Order Format)

This is for saving desired print settings on digital cameras. By entering which images to print

and the number of copies of each, the user can easily have the desired images printed by a

printer or print lab that supports the DPOF format.

Eclipsing (Vignetting)

This refers to when an object obscures part of the field of view so that the whole subject is not

photographed. Vignetting also refers to when the image seen through the viewfinder does not

exactly match the image shot through the objective lens, so the photographed image includes

objects not seen through the viewfinder. In addition, vignetting can occur when an incorrect lens

hood is used, causing shadowing to appear in the corners of the image.

EV (Exposure Value)

A system for measuring exposure. EV0 is when the aperture is at F1 and the shutter speed is

1 second. The EV then increases by 1 each time the aperture increases by one F stop or the

shutter speed increases by one increment. EV can also be used to indicate brightness and ISO

settings.

Exposure

The amount of light used to capture an image. The exposure is determined by the length of

time the shutter is open (shutter speed) and the amount of light that passes through the lens

(aperture).

Image pickup device

This converts light passing through the lens into electrical signals. On this camera, light is

picked up and converted into RGB signals to build a single image.

Imager contrast detection system

Focusing method based on the contrast of the image of the subject captured on the image

pickup device.

ISO

International abbreviation for International Organization for Standardization. The sensitivity

setting used in digital cameras is based on the same ISO standard used for film sensitivity. The

sensitivity is denoted as shown in “ISO 100”. Higher ISO values indicate greater sensitivity to

light, so images can be exposed even in low-light conditions.

JPEG (Joint Photographic Experts Group)

A compression format for color still images. Photographs (images) shot using this camera are

recorded onto the card in JPEG format when the Record mode is set to a setting other than

[RAW]

. By downloading these images to a personal computer, users can edit them using

graphics application software or view the images using an Internet web browser.

(Manual) Mode

The user sets both the aperture and shutter speed.

NTSC (National Television Systems Committee)/PAL (Phase Alternating Line)

Television formats. NTSC is mainly used in Japan, North America and Korea. PAL is mainly

used in Europe and China.

Number of pixels (PIXEL COUNT)

The number of dots (pixels) used to create an image denotes the image size. For instance, an

image in 640 x 480 pixel count is the same size as the computer screen if the monitor setting is

also 640 x 480. If the monitor setting is 1024 x 768, the image only takes up part of the screen.

(Program) Mode

Also called Program AE mode. The camera automatically sets the best shutter speed and

aperture for the shot.

E-450_MASTER.fm Seite 127 Donnerstag, 16. April 2009 10:40 10

Information

128

PictBridge

A standard that enables digital cameras and printers made by different manufacturers to be

connected, and also allows pictures to be printed directly from the camera.

Pixels

A pixel is the smallest unit (dot) used to make up an image. Clear large-sized printed images

require millions of pixels.

RAW

Refers to raw data, data which has not been enhanced with a camera option like white balance,

sharpness, contrast, etc. This file format is for viewing and processing with our own software.

You may not be able to open or process these files with other graphics software applications,

and these files cannot be selected for DPOF printing. RAW files are assigned an orf file

extension (*.orf).

(Shutter Priority) Mode

Also called Shutter Priority AE mode. The user selects the shutter speed and the camera

automatically varies the aperture so that the picture is taken with the best exposure.

Single-lens reflex camera

A camera that uses a mirror to reflect the light entering from the shooting lens so the image can

be checked in the viewfinder. There is no difference between the composition to be captured

and the composition viewed on the viewfinder.

Sleep Mode

A mode designed to save battery life. The camera automatically enters the sleep mode if you

do not operate it for a certain time. To get out of the sleep mode, use any button on the camera

(shutter button, menu button, etc.).

Spot metering

The meter reading is taken from a very small area around the center of the subject, defined by

the spot metering area mark in the viewfinder. Spot metering is ideal for use in difficult light

conditions, or when the important element of the picture (subject’s face) is small. Use spot

metering for backlit subjects, or sports and stage performers. See also digital ESP metering

and center weighted averaging metering.

TFT (Thin-Film Transistor) Color Monitor

A color monitor constructed using thin-film technology.

TTL phase-contrast detection system

This is used to measure the distance to the subject. The camera determines if the image is

focused by the detected phase contrast.

TTL (Through-The-Lens) System

To help adjust exposure, a light receptor built into the camera directly measures the light

passing through the lens.

E-450_MASTER.fm Seite 128 Donnerstag, 16. April 2009 10:40 10

Information

129



Product type

Product type : Single-lens reflex digital camera with interchangeable lens system

Lens : Zuiko Digital, Four Thirds System Lens

Lens mount : Four Thirds mount

Equivalent focal length on

a 35 mm film camera : Approx. twice the focal length of the lens



Image pickup device

Product type : 4/3" Live MOS sensor

No. of total pixels : Approx. 11,800,000 pixels

No. of effective pixels : Approx. 10,000,000 pixels

Screen size : 17.3 mm (H) x 13.0 mm (V) (0.7" x 0.5")

Aspect ratio : 1.33 (4:3)



Viewfinder

Product type : Eye-level single-lens reflex viewfinder

Field of view : Approx. 95% (for field of view on recorded images)

Viewfinder magnification : Approx. 0.92x (–1 m

–1

, 50 mm lens, infinity)

Eye point : Approx. 14 mm (0.6") from the cover glass (–1 m

–1

)

Diopter adjustment range : –3.0 – +1.0 m

–1

Optical path fraction : Quick return half mirror

Depth of field : When PREVIEW registered with the

button

Focusing screen : Fixed

Eyecup : Interchangeable



Live view

: Uses Live MOS sensor for shooting

: Field of view of 100%



LCD monitor

Product type : 2.7" TFT color LCD

Total no. of pixels : Approx. 230,000 dots



Shutter

Product type : Computerized focal-plane shutter

Shutter : 1/4000–60 sec., Bulb shooting



Auto focus

Product type : TTL phase-contrast detection system/Imager contrast detection

system

Focusing points : 3-point multiple AF (left, center, right)

11-point multiple AF: with

[IMAGER AF]

AF luminance range : EV 0 – EV 19 (ISO 100 equivalent, at room temperature 20 °C (68 °F),

TTL phase-contrast detection system)

Selection of focusing point : Auto, Optional

AF illuminator : The built-in flash provides light.



Exposure control

Metering system : TTL full-aperture metering system

(1) Digital ESP metering

(2) Center weighted averaging metering

(3) Spot metering (approx. 2% for the viewfinder screen)

Metering range : EV 1–20 (Digital ESP metering, Center weighted average metering,

Spot metering) (At room temperature, 50 mm f2, ISO 100)

Shooting modes : (1)

AUTO

:Fully automatic

(2)

: Program AE (Program shift can be performed)

(3)

: Aperture priority AE

(4)

: Shutter priority AE

(5)

: Manual

Specifications

Camera specifications

E-450_MASTER.fm Seite 129 Donnerstag, 16. April 2009 10:40 10

Information

130

ISO sensitivity : 100–1600

Exposure compensation : ±5 EV (1/3 EV step)



White balance

Product type : Image pickup device

Mode setting : Auto, Preset WB (8 settings), Customized WB, One-touch WB



Recording

Memory : CF card (Compatible with Type I and II)

Microdrive (Compatible with FAT 16/32)

xD-Picture Card

Recording system : Digital recording, JPEG (in accordance with Design rule for Camera

File system [DCF]), RAW Data

Applicable standards : Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III,

PictBridge



Playback

Playback mode : Single-frame playback, Close-up playback, Index display, Image

rotation, Slideshow, Calendar display

Information display : Information display, Histogram display



Drive

Drive mode : Single-frame shooting, Sequential shooting, Self-timer, Remote control

Sequential shooting : 3.5 frames/sec. (Max. no. of storable sequential pictures: 8 frames in

RAW)

Self-timer : Operation time: 12 sec., 2 sec.

Optical remote control : Operation time: 2 sec., 0 sec. (instantaneous shooting)

(RM-1 Remote Control (optional))



Flash

Synchronization : Synchronized with the camera at 1/180 sec. or less

Flash control mode : TTL-AUTO (TTL pre-flash mode), AUTO, MANUAL

External flash attachment : Hot shoe

Wireless flash function : Compatible with the Olympus wireless RC flash system



External connector

USB connector, VIDEO OUT connector (Multi-connector)



Power supply

Battery : Li-ion Battery (BLS-1) x1



Dimensions/weight

Dimensions : 129.5 mm (W) x 91 mm (H) x 53 mm (D) (5.1" x 3.6" x 2.1")

(excluding protrusions)

Weight : Approx. 380 g (0.8 Ib.) (without battery)



Operating environment

Temperature : 0 °C – 40 °C (32 °F – 104 °F) (operation)/

–20 °C – 60 °C (–4 °F – 140 °F) (storage)

Humidity : 30 – 90% (operation)/10 – 90% (storage)

E-450_MASTER.fm Seite 130 Donnerstag, 16. April 2009 10:40 10

Information

131

BLS-1 Lithium ion battery

MODEL NO. : PS-BLS1

Product type : Rechargeable Lithium ion battery

Nominal voltage : DC 7.2 V

Nominal capacity : 1150 mAh

No. of charge and

discharge times : Approx. 500 times (vary with usage conditions)

Ambient temperature : 0 °C – 40 °C (32 °F – 104 °F) (charging)

–10 °C – 60 °C (14 °F – 140 °F) (operation)

–20 °C – 35 °C (–4 °F – 95 °F) (storage)

Dimensions : Approx. 35.5 mm (W) x 55 mm (D) x 12.8 mm (H)

(1.4" x 2.2" x 0.5")

Weight : Approx. 46 g (0.1 Ib.)

BCS-1 Lithium ion charger

MODEL NO. : PS-BCS1

Rated input : U.S.A CANADA AC 120V (60 Hz)

Other countries AC 100 V – 240 V (50/60 Hz)

Rated output : DC 8.35 V. 400 mA

Charging time : Approx. 3 hours 30 minutes.

(room temperature: if using BLS-1)

Ambient temperature : 0 °C – 40 °C (32 °F – 104 °F) (operation)/

–20 °C – 60 °C (–4 °F – 140 °F) (storage)

Dimensions : Approx. 62 mm (W) x 83 mm (D) x 38 mm (H)

(2.4" x 3.3" x 1.5")

Weight : Approx. 72 g (0.2 Ib.) (without AC cable)

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR OBLIGATION ON

THE PART OF THE MANUFACTURER.

Battery/charger specifications

E-450_MASTER.fm Seite 131 Donnerstag, 16. April 2009 10:40 10

Information

132

E-System Chart

Standard Lenses

Compatible with

EC-14/EC-20

Tele

Converter

Compatible with

EX-25*

Extension

Tube

only at

120 -2 00 m m

EC-14/EC-20

Tele

Converter

Compatible with

EX-25*

Extension

Tube

EC-14/EC-20

Tele

Converter

Compatible with

EX-25*

Extension

Tube

EC-14/EC-20

Tele

Converter

Compatible with

EX-25*

Extension

Tube

EC-14/EC-20

Tele

Converter

Drop-in Filter Set included

Top Pro Lenses Dust-/splashproof – Fixed maximum aperture

Compatible with

EX-25*

Extension

Tube

EC-14**/EC-20*

Tele

Converter

RF-11

Ring Flash

with FR-1

TF-22

Twin Flash

with FR-1

Compatible with

EX-25*

Extension

Tube

EC-14*/EC-20*

Tele

Converter

Compatible with

EX-25*

Extension

Tube

EC-14/EC-20

Tele

Converter

Compatible with

EC-14/EC-20**

Tele

Converter

TF-22

Twin

Flash

Compatible with

EX-25*

Extension

Tube

only at 108 mm

EC-14/EC-20**

Tele

Converter

TF-22

Twin Flash

14-28mm (equiv. to 35mm)

ZUIKO DIGITAL

ED 7-14 mm 1:4.0

Super Wide-angle Zoom Lens

Compatible with

EC-14/EC-20*

Tele

Converter

Compatible with

EX-25*

Extension

Tube

only at 120 mm

EC-14/EC-20*

Tele

Converter

Pro Lenses Dust-/splashproof

Top Pro Lenses

50mm (equiv. to 35mm)

ZUIKO DIGITAL

25 mm 1:2.8 Pancake

Fix Focal Lens

70mm (equiv. to 35mm)

ZUIKO DIGITAL

35 mm 1:3.5

Macro Lens

140-600mm (equiv. to 35mm)

ZUIKO DIGITAL

ED 70-300 mm 1:4.0-5.6

Super Telephoto Zoom Lens

22-44mm (equiv. to 35mm)

ZUIKO DIGITAL

11-22 mm 1:2.8-3.5

Wid-angle Zoom Lens

28-108mm (equiv. to 35mm)

ZUIKO DIGITAL

14-54 mm 1:2.8-3.5 II

Standard Zoom Lens

Compatible with

EX-25

Extension

Tube

EC-14/EC-20

Tele

Converter

RF-11

Ring Flash

with FR-1

TF-22

Twin Flash

with FR-1

100mm (equiv. to 35mm)

ZUIKO DIGITAL

ED 50 mm 1:2.0

Macro Lens

Compatible with

EC-14/EC-20*

Tele

Converter

16mm (equiv. to 35mm)

ZUIKO DIGITAL

ED 8 mm 1:3.5

Fisheye Lens

Compatible with

EX-25*

Extension

Tube

EC-14/EC-20**

Tele

Converter

TF-22

Twin Flash

100-400mm (equiv. to 35mm)

ZUIKO DIGITAL

ED 50-200 mm 1:2.8-3.5 SWD

Telephoto Zoom Lens

24-120mm (equiv. to 35mm)

ZUIKO DIGITAL

ED 12-60 mm 1:2.8-4.0 SWD

Standard Zoom Lens

70-200mm (equiv. to 35mm)

ZUIKO DIGITAL

ED 35-100 mm 1:2.0

Telephoto Zoom Lens

180-500mm (equiv. to 35mm)

ZUIKO DIGITAL

ED 90-250 mm 1:2.8

Telephoto Zoom Lens

300mm (equiv. to 35mm)

ZUIKO DIGITAL

ED 150 mm 1:2.0

Fix Focal Lens

600mm (equiv. to 35mm)

ZUIKO DIGITAL

ED 300 mm 1:2.8

Fix Focal Lens

28-70mm (equiv. to 35mm)

ZUIKO DIGITAL

ED 14-35 mm 1:2.0 SWD

Standard Zoom Lens

Compatible with

EX-25*

Extension

Tube

EC-14*/EC-20*

Tele

Converter

Standard Lenses Pro Lenses Dust-/splashproof

Compatible with

EX-25*

Extension

Tube

only at

50-84 mm

EC-14*/EC-20*

Tele

Converter

Compatible with

EX-25*

Extension

Tube

only at

56-90 mm

EC-14*/EC-20*

Tele

Converter

Compatible with

EX-25*

Extension

Tube

only at

100 -3 60 mm

EC-14*/EC-20*

Tele

Converter

28-84mm (equiv. to 35mm)

ZUIKO DIGITAL

ED 14-42 mm 1:3.5-5.6

Standard Zoom Lens

35-90mm (equiv. to 35mm)

ZUIKO DIGITAL 17.5-45 mm

1:3.5-5.6 Standard Zoom Lens

(only available in special kit)

36-360mm (equiv. to 35mm)

ZUIKO DIGITAL

ED 18- 180 mm 1:3.5-6.3

Super Zoom Lens (10x)

80-300mm (equiv. to 35mm)

ZUIKO DIGITAL

ED 40-150 mm 1:4.0-5.6

Telephoto Zoom Lens

Compatible with

EC-14*/EC-20*

Tele

Converter

18-36mm (equiv. to 35mm)

ZUIKO DIGITAL

ED 9-18 mm 1:4.0-5.6

Ultra Wide-angle Zoom Lens

E-450_Chart_EN_Master.indd 136E-450_Chart_EN_Master.indd 136 17.04.2009 11:56:39 Uhr17.04.2009 11:56:39 Uhr

133

Adapters

ZUIKO DIGITAL

1.4x Tele Converter

EC-14

EX-25

Extension Tube

MF-1

OM-Adapter

ZUIKO DIGITAL

2.0x Tele Converter

EC-20

RM-1

Remote Control

RM-UC1

Remote Cable

Remote Control

VA-1

Varimagni

Angle Finder

Power Supply Shoulder Straps

E-420/E-450 Leather Cases

Eye Cups

E-System Bags

BCS-1

Li-Ion Battery

Charger

For ZUIKO DIGITAL ED 14 - 42 mm or ZUIKO DIGITAL ED 40 - 150 mm

CS-8B and CS-8LM

For ZUIKO DIGITAL ED 25 mm Pancake

CS-8B and CS-8LS

BLS-1

Li-Ion Battery Pack

(for E-450)

CSS-S101L

Black

CSS-S102L

White

CSS-S103L

Brown

CSS-S104L

Darkbrown

DE-P3

Eye Cup

Dioptric Adjustment +3

DE-N3

Eye Cup

Dioptric Adjustment –3

EP-5

Eye Cup

(Standard)

EP-7

Eye Cup

incl. with E-3

ME-1

Magnifyer

Eye Cup 1.2x

EP-6

Eye Cup

Specifications and appearances are subject to change without any notice or obligation on the part of the manufacturer.

*Only with MF **

AF possible when using center frame *** No release via FP-1

Up to two wireless flashes or one FL-20 or the TF-22 can be attached.

FL-50R, FL-36R or FL-20 can be attached.

E-400 Series Leather Case E-System Swing Bag

E-System Bag Compact II

E-System Shoulder Bag II E-System DZK Case II

Black

Dark Brown

White

Information

EP-8

Eye Cup

Flash System

FLRA-1

Flash Reflector

Adapter

(incl. with FL-50R)

FLST-1

Flash Stand

(incl. with FL-50R

and FL-36R)

FL-CB05

Flash Extension Cable

FL-20

Flash

FL-36R

Wireless Flash

FL-50R

Wireless Flash

FL-CB02

5-pin to hot shoe cable

FP-1***

Flash

Power Grip

(incl. FL-CB02)

for FL-50R

HV-1

High Voltage Pack

BN-1

Ni-MH Battery Pack

AC-2

AC Adapter

FLBA-1

Bounce Adapter

(incl. with FL-50R)

SRF-11

Ring Flash Set

(incl. FC-1 / RF-11)

SHV-1

Flash High Voltage Set

(

in cl. H V-1 / B N-1 / AC -2

)

STF-22

Twin Flash Set

(

incl. FC-1 / TF-22

)

FC-1

Macro Flash

Controller

RF-11

Ring Flash

FR-1

Flash Adapter Ring

for 35/50 mm Macro

TF-22

Twin Flash

FL-BKM03

Twin Flash Bracket

FL-BK04

Flash Bracket

E-System Tote Style Bag

E-System Lady Bag Green

E-450_Chart_EN_Master.indd 137E-450_Chart_EN_Master.indd 137 17.04.2009 11:56:48 Uhr17.04.2009 11:56:48 Uhr

Information

134

Read All Instructions –

Before you use the product, read all operating instructions. Save all manuals

and documentation for future reference.

Cleaning –

Always unplug this product from the wall outlet before cleaning. Use only a damp cloth for

cleaning. Never use any type of liquid or aerosol cleaner, or any type of organic solvent to clean this

product.

Attachments –

For your safety, and to avoid damaging the product, use only accessories

recommended by Olympus.

Water and Moisture –

For precautions on products with weatherproof designs, read the

weatherproofing sections.

Location –

To avoid damage to the product, mount the product securely on a stable tripod, stand, or

bracket.

Power Source –

Connect this product only to the power source described on the product label.

Foreign Objects –

To avoid personal injury, never insert a metal object into the product.

Heat –

Never use or store this product near any heat source such as a radiator, heat register, stove, or

any type of equipment or appliance that generates heat, including stereo amplifiers.

SAFETY PRECAUTIONS

General Precautions

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL.

An exclamation mark enclosed in a triangle alerts you to important operating

and maintenance instructions in the documentation provided with the product.

DANGER If the product is used without observing the information given under this

symbol, serious injury or death may result.

WARNING If the product is used without observing the information given under this

symbol, injury or death may result.

CAUTION If the product is used without observing the information given under this

symbol, minor personal injury, damage to the equipment, or loss of valuable

data may result.

WARNING!

TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER DISASSEMBLE, EXPOSE

THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

E-450_MASTER.fm Seite 134 Donnerstag, 16. April 2009 10:40 10

Information

135

WARNING

(

Do not use the camera near flammable or explosive gases.

(

Do not use the flash and LED on people (infants, small children, etc.) at close range.

•

You must be at least 1 m (3 ft.) away from the faces of your subjects. Firing the flash too close to the

subject’s eyes could cause a momentary loss of vision.

(

Keep young children and infants away from the camera.

•

Always use and store the camera out of the reach of young children and infants to prevent the following

dangerous situations which could cause serious injury:

•

Becoming entangled in the camera strap, causing strangulation.

•

Accidentally swallowing the battery, cards or other small parts.

•

Accidentally firing the flash into their own eyes or those of another child.

•

Accidentally being injured by the moving parts of the camera.

(

Do not look at the sun or strong lights with the camera.

(

Do not use or store the camera in dusty or humid places.

(

Do not cover the flash with a hand while firing.

CAUTION

(

Stop using the camera immediately if you notice any unusual odors, noise, or smoke around it.

•

Never remove the batteries with bare hands, which may cause a fire or burn your hands.

(

Never hold or operate the camera with wet hands.

(

Do not leave the camera in places where it may be subject to extremely high temperatures.

•

Doing so may cause parts to deteriorate and, in some circumstances, cause the camera to catch fire. Do

not use the charger if it is covered (such as a blanket). This could cause overheating, resulting in fire.

(

Handle the camera with care to avoid getting a low-temperature burn.

•

When the camera contains metal parts, overheating can result in a low-temperature burn. Pay attention to

the following:

•

When used for a long period, the camera will get hot. If you hold on to the camera in this state, a low-

temperature burn may be caused.

•

In places subject to extremely cold temperatures, the temperature of the camera’s body may be lower

than the environmental temperature. If possible, wear gloves when handling the camera in cold

temperatures.

(

Be careful with the strap.

•

Be careful with the strap when you carry the camera. It could easily catch on stray objects – and cause

serious damage.

DANGER

•

The camera uses a lithium ion battery specified by Olympus. Charge the battery with the specified charger. Do

not use any other chargers.

•

Never heat or incinerate batteries.

•

Take precautions when carrying or storing batteries to prevent them from coming into contact with any metal

objects such as jewelry, pins, fasteners, etc.

•

Never store batteries where they will be exposed to direct sunlight, or subjected to high temperatures in a hot

vehicle, near a heat source, etc.

•

To prevent causing battery leaks or damaging their terminals, carefully follow all instructions regarding the use

of batteries. Never attempt to disassemble a battery or modify it in any way, by soldering, etc.

•

If battery fluid gets into your eyes, flush your eyes immediately with clear, cold running water and seek medical

attention immediately.

•

Always store batteries out of the reach of small children. If a child accidentally swallows a battery, seek medical

attention immediately.

Product Handling Precautions

Battery Handling Precautions

Follow these important guidelines to prevent batteries from leaking, overheating, burning,

exploding, or causing electrical shocks or burns.

E-450_MASTER.fm Seite 135 Donnerstag, 16. April 2009 10:40 10

Information

136

WARNING

•

Keep batteries dry at all times.

•

To prevent batteries from leaking, overheating, or causing a fire or explosion, use only batteries recommended

for use with this product.

•

Insert the battery carefully as described in the operating instructions.

•

If rechargeable batteries have not been recharged within the specified time, stop charging them and do not

use them.

•

Do not use a battery if it is cracked or broken.

•

If a battery leaks, becomes discolored or deformed, or becomes abnormal in any other way during operation,

stop using the camera.

•

If a battery leaks fluid onto your clothing or skin, remove the clothing and flush the affected area with clean,

running cold water immediately. If the fluid burns your skin, seek medical attention immediately.

•

Never subject batteries to strong shocks or continuous vibration.

CAUTION

•

Before loading, always inspect the battery carefully for leaks, discoloration, warping, or any other abnormality.

•

The battery may become hot during prolonged use. To avoid minor burns, do not remove it immediately after

using the camera.

•

Always unload the battery from the camera before storing the camera for a long period.

•

This camera uses a lithium ion battery specified by Olympus. Do not use any other type of battery. For safe

and proper use, read the battery’s instruction manual carefully before using it.

•

If the battery’s terminals get wet or greasy, camera contact failure may result. Wipe the battery well with a dry

cloth before use.

•

Always charge a battery when using it for the first time, or if it has not been used for a long period.

•

When operating the camera with battery power at low temperatures, try to keep the camera and spare battery

as warm as possible. A battery that has run down at low temperatures may be restored after it is warmed at

room temperature.

•

The number of pictures you can take may vary depending on the shooting conditions or battery.

•

Before going on a long trip, and especially before traveling abroad, purchase extra batteries.

A recommended battery may be difficult to obtain while traveling.

•

Please recycle batteries to help save our planet’s resources. When you throw away dead batteries, be sure to

cover their terminals and always observe local laws and regulations.

•

To protect the high-precision technology contained in this product, never leave the camera in the places listed

below, no matter if in use or storage:

•

Places where temperatures and/or humidity are high or go through extreme changes. Direct sunlight,

beaches, locked cars, or near other heat sources (stove, radiator, etc.) or humidifiers.

•

In sandy or dusty environments.

•

Near flammable items or explosives.

•

In wet places, such as bathrooms or in the rain. When using products with weatherproof designs, read their

manuals as well.

•

In places prone to strong vibrations.

•

Never drop the camera or subject it to severe shocks or vibrations.

•

When mounted on a tripod, adjust the position of the camera with the tripod head. Do not twist the camera.

•

Do not leave the camera pointed directly at the sun. This may cause lens or shutter curtain damage, color

failure, ghosting on the image pickup device, or may possibly cause fires.

•

Do not touch electric contacts on cameras and interchangeable lenses. Remember to attach the body cap

when removing the lens.

•

Before storing the camera for a long period, remove the battery. Select a cool, dry location for storage to

prevent condensation or mold from forming inside the camera. After storage, test the camera by turning it on

and pressing the shutter release button to make sure that it is operating normally.

•

Always observe the operating environment restrictions described in the camera’s manual.

Caution for Usage Environment

E-450_MASTER.fm Seite 136 Donnerstag, 16. April 2009 10:40 10

Information

137

•

Do not push the monitor forcibly; otherwise the image may become vague, resulting in a playback mode failure

or damage to the monitor.

•

A strip of light may appear on the top/bottom of the monitor, but this is not a malfunction.

•

When a subject is viewed diagonally in the camera, the edges may appear zigzagged on the monitor. This is

not a malfunction; it will be less noticeable in playback mode.

•

In places subject to low temperatures, the LCD monitor may take a long time to turn on or its color may change

temporarily. When using the camera in extremely cold places, it is a good idea to occasionally place it in a warm

place. An LCD monitor exhibiting poor performance due to low temperatures will recover in normal

temperatures.

•

The LCD used for the monitor is made with high-precision technology. However, black spots or bright spots of

light may appear constantly on the LCD Monitor. Due to its characteristics or the angle at which you are viewing

the monitor, the spot may not be uniform in color and brightness. This is not a malfunction.

•

Do not immerse in water or splash with water.

•

Do not drop or exert strong force on the lens.

•

Do not hold at the moving part of the lens.

•

Do not touch the lens surface directly.

•

Do not touch the contact points directly.

•

Do not subject to abrupt temperature changes.

•

The operating temperature range is –10 °C – 40 °C (14 °F – 104 °F). Always use within this temperature range.

•

Olympus makes no representations or warranties regarding any damages, or benefit expected by using this

unit lawfully, or any request from a third person, which are caused by the inappropriate use of this product.

•

Olympus makes no representations or warranties regarding any damages or any benefit expected by using

this unit lawfully which are caused by erasing picture data.

•

Olympus makes no representations or warranties, either expressed or implied, by or concerning any content

of these written materials or software, and in no event shall be liable for any implied warranty of merchantability

or fitness for any particular purpose or for any consequential, incidental or indirect damages (including but not

limited to damages for loss of business profits, business interruption and loss of business information) arising

from the use or inability to use these written materials or software or equipment. Some countries do not allow

the exclusion or limitation of liability for consequential or incidental damages, so the above limitations may not

apply to you.

•

Olympus reserves all rights to this manual.

Unauthorized photographing or use of copyrighted material may violate applicable copyright laws.

Olympus assumes no responsibility for unauthorized photographing, use or other acts that infringe upon

the rights of copyright owners.

form or by any means, electronic or mechanical, including photocopying and recording or the use of any

type of information storage and retrieval system, without the prior written permission of Olympus. No

liability is assumed with respect to the use of the information contained in these written materials or

software, or for damages resulting from the use of the information contained therein. Olympus reserves

the right to alter the features and contents of this publication or software without obligation or advance

notice.

LCD Monitor

Lens

Legal and Other Notices

Disclaimer of Warranty

Warning

E-450_MASTER.fm Seite 137 Donnerstag, 16. April 2009 10:40 10

Information

138

•

Radio and Television Interference

Changes or modifications not expressly approved by the manufacturer may void the user’s authority to operate

this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–

Adjust or relocate the receiving antenna.

–

Increase the distance between the camera and receiver.

–

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

–

Consult your dealer or an experienced radio/TV technician for help. Only the OLYMPUS-supplied USB cable

should be used to connect the camera to USB enabled personal computers (PC).

Any unauthorized changes or modifications to this equipment would void the user’s authority to operate

it.

We strongly recommend that you use only the genuine Olympus dedicated rechargeable

battery and battery charger with this camera.

Using a non-genuine rechargeable battery and/or battery charger may result in fire or personal

injury due to leakage, heating, ignition or damage to the battery. Olympus does not assume any

liability for accidents or damage that may result from the use of a battery and/or battery charger

that are not genuine Olympus accessories.

FCC Notice

Use Only Dedicated Rechargeable Battery and Battery Charger

For customers in North and South America

For customers in USA

Declaration of Conformity

Model Number : E-450

Trade Name : OLYMPUS

Responsible Party :

Address : 3500 Corporate Parkway, P.O. Box 610, Center Valley,

PA 18034-0610, USA

Telephone Number: 484-896-5000

Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause

undesired operation.

For customers in Canada

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.

E-450_MASTER.fm Seite 138 Donnerstag, 16. April 2009 10:40 10

Information

139

Provisions of warranty

If this product proves to be defective, although it has been used properly (in accordance with the written

Handling Care and Operating instructions supplied with it), during a period of two years from the date of

purchase from an authorized Olympus distributor within the business area of Olympus Imaging Europa

GmbH as stipulated on the website: http://www.olympus.com this product will be repaired, or at Olympus’s

option replaced, free of charge. To claim under this warranty the customer must take the product and this

Warranty Certificate before the end of the two year warranty period to the dealer where the product was

purchased or any other Olympus service station within the business area of Olympus Imaging Europa GmbH

as stipulated on the website: http://www.olympus.com. During the one year period of the World Wide

Warranty the customer may turn the product in at any Olympus service station. Please notice that not in all

countries such Olympus service station exists.

The customer shall transport the product to the dealer or Olympus authorized service station at his own risk

and shall be responsible for any costs incurred in transporting the product.

This warranty does not cover the following and the customer will be required to pay repair charge, even for

defects occurring within the warranty period referred to above.

(a)

Any defect that occurs due to mishandling (such as an operation performed that is not mentioned in the

Handling Care or other sections of the instructions, etc.)

(b)

Any defect that occurs due to repair, modification, cleaning, etc. performed by anyone other than

Olympus or an Olympus authorized service station.

(c)

Any defect or damage that occurs due to transport, a fall, shock, etc. after purchase of the product.

(d)

Any defect or damage that occurs due to fire, earthquake, flood damage, thunderbolt, other natural

disasters, environmental pollution and irregular voltage sources.

(e)

Any defect that occurs due to careless or improper storage (such as keeping the product under conditions

of high temperature and humidity, near insect repellents such as naphthalene or harmful drugs, etc.),

improper maintenance, etc.

(f)

Any defect that occurs due to exhausted batteries, etc.

(g)

Any defect that occurs due to sand, mud, etc. entering the inside of the product casing.

(h)

When this Warranty Certificate is not returned with the product.

(i)

When any alterations whatsoever are made to the Warranty Certificate regarding the year, month and

date of purchase, the customer’s name, the dealer’s name, and the serial number.

(j)

When proof of purchase is not presented with this Warranty Certificate.

This Warranty applies to the product only; the Warranty does not apply to any other accessory equipment,

such as the case, strap, lens cap and batteries.

Olympus’s sole liability under this warranty shall be limited to repairing or replacing the product. Any liability

for indirect or consequential loss or damage of any kind incurred or suffered by the customer due to a defect

of the product, and in particular any loss or damage caused to any lenses, films, other equipment or

accessories used with the product or for any loss resulting from a delay in repair or loss of data, is excluded.

Compelling regulations by law remain unaffected by this.

For customers in Europe

“CE” mark indicates that this product complies with the European requirements for safety,

health, environment and customer protection. “CE” mark cameras are intended for sales in

Europe.

This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of

waste electrical and electronic equipment in the EU countries.

Please do not throw the equipment into the domestic refuse.

Please use the return and collection systems available in your country for the disposal of this

product.

E-450_MASTER.fm Seite 139 Donnerstag, 16. April 2009 10:40 10

Information

140

Notes regarding warranty maintenance

This warranty will only be valid if the Warranty Certificate is duly completed by Olympus or an authorized

dealer or other documents contain sufficient proof. Therefore, please make sure that your name, the name

of the dealer, the serial number and the year, month and date of purchase are all completed or the original

invoice or the sales receipt (indicating the dealer’s name, the date of purchase and product type) is attached

to this Warranty Certificate. Olympus reserves the right to refuse free-of-charge service if neither Warranty

Certificate is completed nor the above document is attached or if the information contained in it is incomplete

or illegible.

Since this Warranty Certificate will not be re-issued, keep it in a safe place.

•

Please refer to the list on the web site: http://www.olympus.com for the authorized international Olympus

service network.

•

IBM is a registered trademark of International Business Machines Corporation.

•

Microsoft and Windows are registered trademarks of Microsoft Corporation.

•

Macintosh is a trademark of Apple Inc.

•

xD-Picture Card™ is a trademark.

•

“Shadow Adjustment Technology” function contains patented technologies from Apical Limited.

•

All other company and product names are registered trademarks and/or trademarks of their respective owners.

•

The standards for camera file systems referred to in this manual are the “Design Rule for Camera File System/

DCF” standards stipulated by the Japan Electronics and Information Technology Industries Association

(JEITA).

Trademarks

E-450_MASTER.fm Seite 140 Donnerstag, 16. April 2009 10:40 10

141

Symbols

............................................................ 87

(Beep sound) ............................................ 86

(Language selection) ............................ 90

CUSTOM ................................................... 86

Custom Menu 1 ........................................ 124

Custom Menu 2 ........................................ 125

EASY ......................................................... 86

FUNCTION ................................................ 85

FUNCTION .............................................. 85

.......................................................... 85

Playback Menu ....................................... 124

RC mode .................................................... 71

SET .......................................................... 88

Shooting Menu 1 ...................................... 123

Shooting Menu 2 ...................................... 123

AF/MF ........................................................ 83

BUTTON/DIAL ........................................... 83

DISP/

/PC .............................................. 86

EXP/

/ISO ............................................. 87

CUSTOM ............................................... 87

/COLOR/WB ........................................ 88

RECORD/ERASE ...................................... 89

h K

UTILITY .............................................112

VIVID ......................................................... 63

NATURAL .................................................. 63

MUTED ...................................................... 63

PORTRAIT ................................................. 63

Adobe RGB .................................................... 88

AE BKT ........................................................... 49

AE bracketing ................................................. 49

AE lock ........................................................... 49

AEL/AFL ......................................................... 84

AEL/AFL MEMO ............................................. 85

AEL Metering .................................................. 87

AF AREA .................................................. 53, 85

AF ILLUMINAT. ............................................... 83

AF MODE ................................................. 51, 85

AF SENSOR ................................................... 37

AF target ......................................................... 53

ALL

........................................................ 88

ALL ERASE .................................................... 82

ANTI-SHOCK

........................................... 58

Aperture priority shooting

........................... 43

Aperture value ................................................ 43

Art filter mode

............................................ 5

Art filter/Scene

..................................... 4

Auto flash AUTO ............................................. 66

Auto focus ............................................... 54, 104

AUTO POP UP ................................................88

AUTO shooting

AUTO

......................................4

Auto white balance ....................................60, 61

B (Basic) ..................................................59, 107

B&W FILTER ...................................................64

BACKLIT LCD .................................................86

Battery ..................................................... 11, 114

BEACH&SNOW

..........................................5

BLACK & WHITE .............................................79

BULB FOCUSING ...........................................83

Bulb shooting .............................................46, 58

BULB TIMER ...................................................87

C-AF (continuous AF) ......................................52

C-AF+MF .........................................................53

Calendar display ..............................................75

CANDLE

......................................................5

CARD SETUP .........................................82, 114

Cards .......................................................13, 113

Center weighted averaging metering

........47

CF/xD ..............................................................90

CHILDREN

...................................................5

CLEANING MODE ........................................112

Close-up playback

......................................74

COLOR SPACE ...............................................88

Color temperature .........................................120

CompactFlash .........................................13, 113

Comparison screen .........................................41

Compression rate ............................................59

Continuous AF (C-AF) .....................................52

CONTRAST .....................................................64

CONTROL .......................................................86

COPY ALL .......................................................80

Custom printing ...............................................95

CUSTOM RESET ............................................30

Custom white balance CWB ............................61

Date/time setting

......................................15

DIAL DIRECTION ............................................84

DIAL FUNCTION .............................................83

Digital ESP metering

................................47

Diopter adjustment ..........................................14

Direct buttons ..................................................27

Direct print .......................................................93

DIS MODE

..................................................5

DOCUMENTS

..............................................5

Index

E-450_MASTER.fm Seite 141 Donnerstag, 16. April 2009 10:40 10

142

dpi SETTING .................................................. 89

DPOF .............................................................. 91

Dust reduction .........................................14, 112

Easy printing ................................................... 94

Easy shooting modes ....................................... 4

Enlarged display ............................................. 41

Exposure compensation

............................ 48

Eyepiece cover ......................................... 10, 56

E-System Chart ............................................. 132

F (Fine) ................................................... 59, 107

FACE DETECT

................................... 39, 87

FILE NAME ..................................................... 89

Fill-in flash

.................................................. 67

FIREWORKS

(

.............................................. 5

FIRMWARE .................................................... 90

Flash intensity control

............................... 69

Flash mode

................................................ 66

Flash off

.................................................... 67

Fn FACE DETECT .................................... 39, 85

Focus lock ...................................................... 54

FOCUS RING ................................................. 83

FORMAT ........................................................114

Four Thirds system lenses ............................115

FRAME ASSIST ............................................. 87

GRADATION ................................................... 64

HIGH KEY

.............................................. 5, 64

Histogram ......................................... 40, 76, 108

HYBRID AF

............................................. 37

IMAGER AF

............................................ 37

Index display

............................................ 75

Information display ................................... 40, 76

ISO ........................................................... 50, 85

ISO-AUTO ...................................................... 87

ISO-AUTO SET .............................................. 87

JPEG EDIT ..................................................... 78

(Large) ................................................ 59, 107

LANDSCAPE

.............................................. 5

LANDSCAPE+PORTRAIT

............................5

Lens .........................................................12, 115

Lithium ion battery ................................... 11, 114

Lithium ion charger .................................. 11, 114

LIVE PREVIEW .........................................46, 85

Live view ..........................................................36

LIVE VIEW AF MODE .....................................37

LIVE VIEW BOOST .........................................87

LOW KEY

................................................5, 64

(Middle) ...............................................59, 107

MACRO

........................................................5

Manual flash ....................................................67

Manual focus (MF) ....................................40, 52

Manual shooting

.........................................45

Menu ...............................................................29

METERING ...............................................47, 85

MF (manual focus) ..........................................52

Microdrive ................................................13, 113

Monitor adjustment

...................................90

MONOTONE ...................................................63

MTP .........................................................86, 102

N (Normal) ...............................................59, 107

NATURE MACRO

.......................................5

NIGHT SCENE

...........................................5

NIGHT+PORTRAIT

....................................5

NOISE FILTER ................................................65

NOISE REDUCT. .............................................65

NTSC ...............................................................90

Number of pixels .............................................59

OLYMPUS Master ...........................................97

Olympus wireless RC flash system .................71

One-touch white balance

.............61, 63, 85

PAL ..................................................................90

PANORAMA

..........................................5, 42

PICT. TONE .....................................................64

PictBridge ........................................................93

PICTURE MODE .............................................63

PIN HOLE

....................................................5

Pixel count .................................................59, 88

PIXEL MAPPING ...........................................112

POP ART

.....................................................5

PORTRAIT

...................................................5

Preset white balance .................................60, 61

Preview ......................................................46, 85

Print mode

..................................................95

E-450_MASTER.fm Seite 142 Donnerstag, 16. April 2009 10:40 10

143

Print reservation ............................................. 91

Program shift

............................................ 43

Program shooting

....................................... 43

Protecting

................................................ 81

RAW ............................................................... 59

RAW DATA EDIT ............................................ 78

RAW+JPEG ERASE ....................................... 89

REC VIEW ...................................................... 90

Record mode

.............................. 59, 60, 121

REDEYE FIX .................................................. 79

Red-eye reduction flash

.......................... 66

Remote control

............................................ 57

RESET LENS ................................................. 83

RESET PROTECT ......................................... 81

Resizing

................................................... 79

Rotating images

......................................... 77

(Small) ................................................ 59, 107

S-AF (single AF) ............................................. 51

S-AF+MF ........................................................ 52

SATURATION ........................................... 64, 79

Scene mode

.............................................. 5

Self-timer

................................................... 56

SEPIA ............................................................. 79

Sequential shooting

................................. 55

SF (Super Fine) ...................................... 59, 107

SHADOW ADJ ................................................ 79

SHARPNESS ................................................. 64

Shutter priority shooting

.............................. 44

Shutter speed ................................................. 43

Single AF (S-AF) ............................................ 51

Single-frame copy ........................................... 80

Single-frame erase

..................................... 82

Single-frame playback .................................... 74

Single-frame protect ....................................... 81

Single-frame shooting

.............................. 55

SLEEP ............................................................ 86

Slideshow

................................................. 77

Slow synchronization

SLOW ....................... 66

Slow synchronization

SLOW2/2nd

CURTAIN ..................................................... 66

SOFT FOCUS

.............................................. 5

SPORT

........................................................ 5

Spot metering – highlight control

.......... 47

Spot metering – shadow control

.......... 47

Spot metering

........................................... 47

sRGB .............................................................. 88

STORAGE ................................................ 86, 98

Strap ............................................................... 10

SUNSET

..................................................... 5

Super control panel .................................... 7, 28

Super FP flash ................................................ 71

TEST PICTURE ..............................................85

Trimming

...................................................79

USB MODE .....................................................86

VIDEO OUT .....................................................90

Viewfinder ..............................................6, 14, 16

WB .............................................................61, 85

WB compensation ...........................................62

White balance

..........................................60

xD-Picture Card .......................................13, 113

ZUIKO DIGITAL interchangeable lens ..........115

E-450_MASTER.fm Seite 143 Donnerstag, 16. April 2009 10:40 10

144

Memo

E-450_MASTER.fm Seite 144 Donnerstag, 16. April 2009 10:40 10

145

Memo

E-450_MASTER.fm Seite 145 Donnerstag, 16. April 2009 10:40 10

146

Memo

E-450_MASTER.fm Seite 146 Donnerstag, 16. April 2009 10:40 10

147

Memo

E-450_MASTER.fm Seite 147 Donnerstag, 16. April 2009 10:40 10

hoe zet je je camera dat je op sport kunt trekken? Gesteld op 18-7-2020 om 10:23
Reageer op deze vraag Misbruik melden
Ik heb een card error op een cf voor olympus e-450. Een nieuwe kaart geeft na enkele opnamen ook een error. Foto's die ik nu nog maak zijn op de kaart niet meer leesbaar.
Kan ik de kaarten opnieuw formatteren? Gesteld op 14-5-2014 om 20:12
Reageer op deze vraag Misbruik melden
- absoluut, eindelijk moest je dit doen voor eerste ingebruikname
  groetjes ronny Geantwoord op 16-5-2014 om 22:15
  Waardeer dit antwoord Misbruik melden
Excuseer mij, maar ik heb nog 1 brandende vraag, is het mogelijk analoge 3/4 Olympus lenzen te gebruiken (met adapter, die heb ik reeds), uiteraard op de E-450, of kan ik dit vergeten? Zeer bedankt voor een antwoord(-en), Mark Gesteld op 3-3-2014 om 16:47
Reageer op deze vraag Misbruik melden
- Voor technische ondersteuning adviseren wij u contact op te nemen met Olympus:
  
  email ; consumer-nl@olympus.nl
  tel: 071 - 582 18 88
  www.olympus.nl
  Geantwoord op 18-3-2014 om 15:56
  Waardeer dit antwoord Misbruik melden
heeft er iemand van jullie ook problemen met de flits. Deze blijft maar flitsen en zodoende haast geen scherpstelling Gesteld op 17-10-2011 om 17:57
Reageer op deze vraag Misbruik melden
- Hier ook hetzelfde probleem.
  Ik heb hem nu meer dan 1 jaar en ik kom er maar niet uit wat het zou kunnen zijn.
  Heb al verschillende instellingen geprobeerd maar helaas.
  Hierdoor al vele leuke kiekjes misgelopen bah.
  
  Hoop snel de oplossing te vinden.
  
  Groet,\
  D Geantwoord op 11-12-2011 om 14:24
  Waardeer dit antwoord (2) Misbruik melden
Beste,

Ik heb ook de E-450 (schitterend toestel trouwens). Als je live-view gebruikt, probeert hij scherp te stellen zonder flitser, maar zodra je door de zoeker gaat kijken, gaat de camera de flitser gebruiken om zichzelf scherp te stellen. Het is nu eenmaal zo ingebouwd door de fabrikant.
Ik heb mezelf dit ook heel lang afgevraagd.

Dit probleem is van de baan als je een externe flitser gebruikt met lichtmeting of je een lampje bijhebt om op het voorwerp te schijnen (maar dit is niet in alle gevallen handig he :p)

Met vriendelijke groeten,

Xavier Weekers

Geantwoord op 7-1-2013 om 08:10
Waardeer dit antwoord Misbruik melden
je die flitsen die komen door of dat het te donker of te licht is en door die flitsen kan die zien wat de afstand is dan kan je volgens mij uitzetten bij RC-modus
(ik weet het niet zeker) Geantwoord op 10-2-2018 om 08:48
Waardeer dit antwoord (1) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Olympus e 450 bij:

nieuwe vragen en antwoorden
nieuwe handleidingen

U ontvangt een email met instructies om u voor één of beide opties in te schrijven.

Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Olympus e 450 in de taal/talen: Engels als bijlage per email.

De handleiding is 10,01 mb groot.

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Olympus e 450

Olympus e 450 Gebruiksaanwijzing - Nederlands - 147 pagina's

Olympus e 450 Gebruiksaanwijzing - Deutsch - 147 pagina's

Olympus e 450 Gebruiksaanwijzing - Français - 147 pagina's

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.

Olympus e 450 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Olympus e 450

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info

Olympus e 450 Handleiding

Hulp nodig? Stel uw vraag in het forum

Forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Olympus e 450

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info