289548
28
Verklein
Vergroot
Pagina terug
1/147
Pagina verder
http://www.olympus.com/
Premises:
Goods delivery:
Letters:
Wendenstrasse 14 – 18, 20097 Hamburg, Germany
Tel.: +49 40 - 23 77 3-0 / Fax: +49 40 - 23 07 61
Bredowstrasse 20, 22113 Hamburg, Germany
Postfach 10 49 08, 20034 Hamburg, Germany
European Technical Customer Support:
Please visit our homepage
http://www.olympus-europa.com
or call our TOLL FREE NUMBER*:
00800 - 67 10 83 00
for Austria, Belgium, Denmark, Finland, France, Germany, Luxemburg, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom.
* Please note some (mobile) phone services / provider do not permit access or request an
additional prefix to +800 numbers.
For all not listed European Countries and in case that you can’t get connected
to the above mentioned number please make use of the following
CHARGED NUMBERS:
+49 180 5 - 67 10 83
or
+49 40 - 237 73 48 99.
Our Technical Customer Support is available from 9 am to 6 pm MET (Monday to Friday).
Authorized Distributors
United Kingdom:
/Eire
Olympus Service Department
P.O. Box 222
Southall Middlesex UB2 4SH
Tel.: (0207) 2530513
South Africa: City Square Trading 197 (PTY) Ltd.
Unit A, The Meadows
Meadowbrooke Business Estate
Jacaranda Avenue, Olivedale Ext. 17
Johannesburg,
Tel.: +27 11 7042021
Egypt: Optoscient M. Nagui & Co
10. 26th July St., Cairo
Tel.: +20 2 391 4883
© 2009
Printed in Germany · OIME · 4/2009 · Hab. · E0462319
z
Thank you for purchasing an Olympus digital camera. Before you start to use your new camera,
please read these instructions carefully to enjoy optimum performance and a longer service life.
Keep this manual in a safe place for future reference.
z
We recommend that you take test shots to get accustomed to your camera before taking important
photographs.
z
The screen and camera illustrations shown in this manual were produced during the development
stages and may differ from the actual product.
z
The contents in this manual are based on firmware version 1.0 for this camera. If there are addition
and/or modification of functions due to firmware update for the camera, the contents will differ. For
the latest information, please visit the Olympus website.
DIGITAL CAMERA
INSTRUCTION
MANUAL
EN
INSTRUCTION MANUAL
Basic guide P. 2
Review the camera part names and the
basic steps for shooting and playback.
Table of Contents P. 20
E-450_Umschlag_Master.fm Seite 1 Donnerstag, 16. April 2009 10:33 10
2
EN
4
Camera
Shutter button
g
P. 16, 31
Mode dial
g
P. 4
F
(Exposure
compensation) button
g
P. 4 8
Control dial (
j
)
g
P. 19, 26
Strap eyelet
g
P. 1 0
Self-timer/Remote control lamp/
Remote control receiver
g
P. 56, 57
Lens attachment mark
g
P. 1 2
Hot shoe
g
P. 7 0
Mirror
g
P. 3 7
Lens release button
g
P. 1 2
Lens lock pin
Built-in flash
g
P. 6 8
<
/
Y
/
j
(Remote control/Self-timer/
Sequential shooting) button
g
P. 55–58, 85
COPY
/
<
(Copy/Print) button
g
P. 80, 93
#
(Flash) button
g
P. 6 8
Mount
(Attach the lens after removing the body cap from
the camera to prevent dust and dirt from entering
the camera body.)
Strap eyelet
g
P. 1 0
E-450_MASTER.fm Seite 2 Donnerstag, 16. April 2009 10:40 10
Basic guide
3
EN
LCD monitor
g
P. 8, 9, 36
Viewfinder
g
P. 6
S
(Erase) button
g
P. 8 2
INFO
(Information
display) button
g
P. 28, 40, 74
MENU
button
g
P. 2 9
q
(Playback) button
g
P. 7 4
AEL
/
AFL
button
g
P. 37, 49, 84
0
(Protect)
button
g
P. 8 1
i
button
g
P. 2 9
Arrow pad
(
acbd
)
g
P. 29, 85
Card cover
g
P. 1 3
CF card slot
g
P. 1 3
Eject button
g
P. 1 3
Multi-connector
g
P. 78, 94, 98
Connector cover
xD-Picture Card slot
g
P. 1 3
Diopter adjustment
dial
g
P. 1 4
Eyecup
g
P. 5 6
Power switch
g
P. 1 4
Tripod socket
Battery compartment
lock
g
P. 11
Battery compartment
cover
g
P. 11
u
(Live view)
button
g
P. 3 6
Card access lamp
g
P. 13, 16, 99
Names of parts and functions
E-450_MASTER.fm Seite 3 Donnerstag, 16. April 2009 10:40 10
4
EN
Mode dial
The mode dial allows you to change the
camera settings easily according to the
subject.
For more advanced shooting and greater creative control, you can set the aperture value and
shutter speed.
The settings made in the advanced shooting modes are retained even if the camera is turned off.
Select according to the shooting scene. The camera sets the appropriate shooting conditions
automatically.
When rotating the mode dial or turning off the power in the easy shooting modes, functions with
changes made to their settings are restored to the factory default settings.
P
Program shooting
Allows you to shoot using an aperture and shutter speed that
the camera sets. (
g
P. 43)
A
Aperture priority
shooting
Allows you to set the aperture manually. The camera sets the
shutter speed automatically. (
g
P. 4 3 )
S
Shutter priority
shooting
Allows you to set the shutter speed manually. The camera
sets the aperture automatically. (
g
P. 44)
M
Manual shooting
Allows you to set the aperture and shutter speed manually.
(
g
P. 45)
AUTO
AUTO
Allows you to shoot using an optimum aperture and shutter
speed that the camera sets. The built-in flash pops up
automatically in low-light conditions.
g
Art filter/Scene
When you select a desired filter or scene, the camera
optimizes the shooting conditions for that filter or scene. Most
of the functions cannot be changed.
i
PORTRAIT
Suitable for shooting a portrait-style image of a person.
l
LANDSCAPE
Suitable for shooting landscapes and other outdoor scenes.
&
MACRO
Suitable for taking close-up pictures.
j
SPORT
Suitable for capturing fast-moving action without blurring.
/
NIGHT+PORTRAIT
Suitable for shooting both the main subject and background
at night.
Advanced shooting modes
Easy shooting modes
E-450_MASTER.fm Seite 4 Donnerstag, 16. April 2009 10:40 10
Basic guide
5
EN
1 Set the mode dial to g.
The art filter menu is displayed. Press d to display the scene menu.
2 Use ac to select the filter or scene.
3 Press the i button.
To change the setting, press the i button again to display the menu.
Art filters are not applied to RAW images.
If the record mode is set to
[RAW]
and art filter is applied, the record mode is automatically set to
[RAW+
Y
N]
.
The grainy appearance of the picture may be emphasized depending on the type of art filter.
Setting the art filter/scene
POP ART1
SET
PORTRAIT1
SET
d
b
Icon Art filter Icon Art filter
j
POP ART
l
PIN HOLE
k
SOFT FOCUS
Types of art filters
Types of scene modes
Icon Mode Icon Mode
I
1PORTRAIT
q
10 DIS MODE
L
2 LANDSCAPE
J
11 MACRO
K
3 LANDSCAPE+PORTRAIT
r
12 NATURE MACRO
G
4 NIGHT SCENE
&
13 CANDLE
U
5 NIGHT+PORTRAIT
*
14 SUNSET
G
6 CHILDREN
(
15 FIREWORKS
J
7SPORT
@
16 DOCUMENTS
H
8 HIGH KEY
s
17 PANORAMA
I
9LOW KEY
g
18 BEACH & SNOW
Names of parts and functions
E-450_MASTER.fm Seite 5 Donnerstag, 16. April 2009 10:40 10
6
EN
Viewfinder
AF target
g
P. 5 3
Aperture value
g
P. 43–46
Battery check
(ready for use)
(charging required)
Flash
g
P. 6 6
(blinks: charging in progress,
lights up: charging completed)
AE lock
g
P. 4 9
Shutter speed
g
P. 43–46
Shooting mode
g
P. 4
Metering mode
g
P. 4 7
Exposure compensation
value
g
P. 4 8
White balance
(Displayed when set to a
setting other than auto
white balance.)
g
P. 6 0
AF confirmation mark
g
P. 16, 43, 54
E-450_MASTER.fm Seite 6 Donnerstag, 16. April 2009 10:40 10
Basic guide
7
EN
Super control panel
The following screen allows the display and setting of shooting settings at the same time
and is called the super control panel. Press the
INFO
button to display the super control
panel on the LCD monitor.
g
“Using the super control panel” (P. 28)
Shutter speed
g
P. 43–46
Exposure compensation indicator
g
P. 4 8
Exposure level indicator
g
P. 4 5
Flash intensity control indicator
g
P. 6 9
Aperture value
g
P. 43–46
Sharpness
N
g
P. 6 3
Contrast
J
g
P. 6 3
Saturation
T
g
P. 6 3
Gradation
z
g
P. 6 4
B&W filter
x
g
P. 6 3
Picture tone
y
g
P. 6 3
Super FP flash
1
g
P. 7 1
Noise reduction
mO
g
P. 6 5
Auto bracket
0
g
P. 4 9
RC mode
m
g
P. 7 1
AF illuminator
T
g
P. 8 3
Internal temperature warning
m
g
P. 11 0
White balance
g
P. 6 0
White balance compensation
g
P. 6 2
ISO sensitivity
g
P. 5 0
Metering mode
g
P. 4 7
AF mode
g
P. 5 1
AF target
g
P. 5 3
Record mode
g
P. 5 9
Flash intensity control
g
P. 6 9
Number of storable
still pictures
g
P. 121
Remote control/Self-timer/Sequential shooting
g
P. 55–58
Card
g
P. 11 3
Flash mode
g
P. 6 6
The functions within this area can be set on the
super control panel.
250 F5.6
+2.0
2008. 08.16
FP
arge
BKT
AF
Normal
OFF
RC
Face
detection
g
P. 3 9
Battery check
g
P. 6
Flash charging
g
P. 6 8
Shooting mode
g
P. 4
Date
g
P. 1 5
Exposure
compensation value
g
P. 4 8
Exposure level
g
P. 4 5
Picture mode
g
P. 6 3
Color space
g
P. 8 8
Names of parts and functions
E-450_MASTER.fm Seite 7 Donnerstag, 16. April 2009 10:40 10
8
EN
LCD monitor (Live view)
You can use the LCD monitor to view the subject while shooting. Press the
u
button to
use live view.
g
“Using live view” (P. 36)
Exposure
compensation value
g
P. 4 8
Flash intensity control
g
P. 6 9
Internal temperature warning
g
P. 11 0
Face detection
g
g
P. 3 9
AF target
g
P. 5 3
AF confirmation mark
g
P. 16, 38, 54
Histogram
g
P. 108
Flash mode
g
P. 6 6
Metering mode
g
P. 4 7
Flash
g
P. 6 8
(blinks: charging in progress,
lights up: charging completed)
Sequential shooting
g
P. 5 5
Self-timer
g
P. 5 6
Remote control
g
P. 5 7
White balance
g
P. 6 0
ISO sensitivity
g
P. 5 0
Record mode
g
P. 5 9
Number of storable
still pictures
g
P. 121
Shutter speed
g
P. 43–46
Aperture value
g
P. 43–46
RC mode
q
g
P. 7 1
Super FP flash
s
g
P. 7 1
Auto bracket
t
g
P. 4 9
AE lock
u
g
P. 4 9
Live view AF mode
po
g
P. 3 7
Battery check
g
P. 6
Shooting mode
g
P. 4
Card
g
P. 11 3
E-450_MASTER.fm Seite 8 Donnerstag, 16. April 2009 10:40 10
Basic guide
9
EN
LCD monitor (Playback)
You can switch the monitor display using the
INFO
button.
g
“Information display” (P. 76)
1/250 F5.6
250 F5.6
+2.0 45mm
+2.0 45mm
ISO 1 00
ISO 100
0.0
0.0
A: 0
A: 0
WB : AUTO
WB : AUTO
G: 0
G: 0
NATURAL
NATURAL
sRGB
sRGB
L
N
N
[3648 x2736, 1/8]
[3648x2736,1/8]
x
10
x
10
08.0 8.16
’08.08.16
21:56
21:56
100-0 015
100-0015
15
15
L
N
N
Battery check
g
P. 6
Card
g
P. 11 3
Print reservation
Number of prints
g
P. 9 1
Protect
g
P. 8 1
Record mode
g
P. 5 9
Date and time
g
P. 1 5
File number
g
P. 7 6
Picture mode
g
P. 6 3
Color space
g
P. 8 8
Shooting
information
Single-frame playback information
Record mode
g
P. 5 9
Frame number
g
P. 7 6
Aperture value
g
P. 43–46
Shooting mode
g
P. 4
Focal length
g
P. 11 5
(The focal length is displayed in
1 mm units.)
Exposure compensation
g
P. 4 8
Shutter speed
g
P. 43–46
ISO sensitivity
g
P. 5 0
Flash intensity control
g
P. 6 9
White balance compensation
g
P. 6 2
Metering mode
g
P. 4 7
AF target
g
P. 5 3
White balance
g
P. 6 0
Histogram
g
P. 7 6
Names of parts and functions
E-450_MASTER.fm Seite 9 Donnerstag, 16. April 2009 10:40 10
10
EN
Unpack the box contents
The following items are included with the camera.
If anything is missing or damaged, contact the dealer from whom you purchased the camera.
Camera Body cap Strap BLS-1 Lithium ion
battery
BCS-1 Lithium ion
charger
USB cable Video cable
Eyepiece cover
OLYMPUS Master 2 CD-ROM
Instruction manual
Warranty card
Lastly, pull the strap tight
making sure that it is
fastened securely (
4
).
Attaching the strap
Attach the other end of the strap to the other eyelet in the same way.
Thread the eyepiece cover through one end of the
strap (
1
). Thread the strap as indicated by the
arrows (
2
,
3
).
E-450_MASTER.fm Seite 10 Donnerstag, 16. April 2009 10:40 10
Basic guide
11
EN
Preparing the battery
BLS-1 Lithium ion battery
AC wall outlet
BCS-1 Lithium ion
charger
AC cable
Battery lock
It is recommended to set aside a backup battery for prolonged shooting in case the battery in
use drains.
1
Charging the battery
3
Close the battery compartment cover
Close the battery compartment cover until you hear a click.
Press the battery lock to
unlock the battery.
Direction
indicating mark
W
Unloading the
battery
2
Loading the battery
Charging indicator
Amber light: Charging in progress
Blue light: Charging completed
(Charging time: Approx. 3 hours
30 minutes)
Amber blinking: Charging error
W
Battery compartment
cover
Battery compartment
lock
Preparations for shooting
E-450_MASTER.fm Seite 11 Donnerstag, 16. April 2009 10:40 10
12
EN
Attaching a lens to the camera
Rear cap
Body cap
Lens cap
Lens attachment
mark (Red)
Alignment mark (Red)
Lens release button
1
Remove the body cap from the camera
and the rear cap from the lens
2
Attach a lens to the camera
3
Remove the lens cap
(
3
,
4
)
Removing the lens from the
camera
While pressing the lens release button
(
1
), rotate the lens in the direction of
the arrow (
2
).
Align the lens attachment mark
(red) on the camera with the
alignment mark (red) on the
lens, then insert the lens into
the camera’s body (
1
).
Rotate the lens in the direction
indicated by the arrow until you
hear it click (
2
).
Make sure the power switch is set
to OFF.
Do not press the lens release
button.
E-450_MASTER.fm Seite 12 Donnerstag, 16. April 2009 10:40 10
Basic guide
13
EN
Loading the card
xD-Picture Card
CompactFlash/Microdrive
Open the card cover.
Insert the card until it is locked into place.
Open the card cover.
Insert the card’s contact area into the slot as
far as it can go.
xD-Picture Card slot
Card cover
CF card slot
W
mark
Eject button
Removing the card
Never open the card cover while the card
access lamp is blinking.
Press the eject button all the way in to
make it pop out. Press the eject button
again all the way in to eject the card.
Pull out the card.
Press the inserted card lightly and it will be
ejected.
Pull out the card.
xD-Picture Card
CompactFlash/Microdrive
Card access lamp
Card access lamp
Connector
Preparations for shooting
E-450_MASTER.fm Seite 13 Donnerstag, 16. April 2009 10:40 10
14
EN
Power on
Dust reduction function operation
The dust reduction function is automatically activated when the camera is turned on. Ultrasonic
vibrations are used to remove dust and dirt from the image pickup device’s filter surface. The SSWF
(Super Sonic Wave Filter) indicator blinks while dust reduction is working.
Adjust the viewfinder’s diopter in accordance
with your vision.
While looking through the viewfinder, rotate
the diopter adjustment dial little by little.
When you can see the AF target clearly,
adjustment is complete.
Adjusting the viewfinder’s
diopter
Viewfinder
Diopter adjustment dialAF target
SSWF indicator
When the camera is turned on, the
super control panel screen is
displayed on the monitor.
If the super control panel screen
does not appear, press the
INFO
button.
Set the mode dial to
AUTO
.
INFO
button
Super control panel
1
Set the camera’s power switch to ON.
To turn off the power, set the power switch to
OFF
.
Power switch
Mode dial
LCD monitor
2008. 08.16
AF
arge
Normal
OFF
AUTO
E-450_MASTER.fm Seite 14 Donnerstag, 16. April 2009 10:40 10
Basic guide
15
EN
Setting the date/time
CF
5
SEC
CF/xD
REC VIEW
ENG.
NTSC
VIDEO OUT
CANCEL SELECT
GO
--
.
--
.
--
--
:
--
j
±0
k
±0
Date and time information is recorded on the card together with the
images. The file name is also included with the date and time
information. Be sure to set the correct date and time before using
the camera.
CARD SETUP
NORM
AUTO
CUSTOM RESET
PICTURE MODE
GRADATION
WB
CANCEL SELECT
GO
N
Y
Y/M/D
CANCEL
MD TIME
2009
Y
Y/M/D
CANCEL
M D TIME
2009 03 01 14 00
Y
Y/M/D
M D TIME
GOCANCEL
2009 03 01 14 00
Y
Y/M/D
M D TIME
GOCANCEL
CF
5
SEC
CF/xD
REC VIEW
ENG.
NTSC
VIDEO OUT
CANCEL SELECT
GO
j
±0
k
±0
’09.03.01
14:01
1
Press the
MENU
button
2
Use
ac
to select [
Z
],
then press
d
3
Use
ac
to select
[
X
], then press
d
4
Use
ac
to select [Y],
then press
d
5
Repeat this procedure until
the date and time are
completely set
6
Use
ac
to select the
date format
7
Press the
i
button
8
Press the
MENU
button
to exit
MENU
button
The time is displayed in the 24-hour format.
Arrow pad
acbd
The menu screen is displayed on
the LCD monitor.
Preparations for shooting
E-450_MASTER.fm Seite 15 Donnerstag, 16. April 2009 10:40 10
16
EN
Shooting
250 F5.6
2008. 08.16
AF
arge
Normal
OFF
AUTO
Shutter button
Card access
lamp
The shutter sounds and the picture is taken.
The card access lamp blinks and the camera starts recording the picture.
AF confirmation
mark
Aperture value
Shutter speed
1
Place the AF target on the
subject while viewing
through the viewfinder
2
Adjust the focus
3
Release the shutter
Press the shutter
button halfway.
Viewfinder
Press the shutter button all
the way (fully).
Never remove the battery or card while the card access lamp is blinking. Doing so could
destroy stored pictures and prevent storage of pictures you have just taken.
The focus is locked when a beep tone is output. The AF confirmation mark and the AF
target in focus light up in the viewfinder.
The shutter speed and aperture value that have been set automatically by the camera are
displayed.
The super control panel is not displayed while the shutter button is pressed.
Viewfinder
AF target
Super control panel
E-450_MASTER.fm Seite 16 Donnerstag, 16. April 2009 10:40 10
Basic guide
17
EN
u
button
Horizontal grip Vertical grip
Keep your fingers and the
strap away from the lens
and flash.
Taking a picture
while viewing the
monitor
It is possible to use the LCD monitor as a
viewfinder and check the subject’s composition,
or shoot while viewing an enlarged display on the
LCD monitor.
g
“Using live view” (P. 36)
1
Press the
u
(live
view) button to switch
to live view
If no operations are performed for approximately 8 seconds while the camera is on,
the monitor backlight turns off to save battery power (when the super control panel
is lit). If no operations are performed for approximately one minute thereafter, the
camera enters the sleep mode (stand-by) and stops operating. The camera
activates again when you touch any button (the shutter button,
q
button, etc.).
g
“BACKLIT LCD (Backlight timer)” (P. 86), “SLEEP” (P. 86)
The subject is displayed on the
LCD monitor.
2
Press the shutter button to
take the picture
The picture is taken with the focus adjusted.
Shutter button
Holding the camera
When the camera stops operating
250
250
F5.6
F5.6
250
P
P
F5.6
3 8
38
L
N
N
Preparations for shooting
E-450_MASTER.fm Seite 17 Donnerstag, 16. April 2009 10:40 10
18
EN
Playback/Erasing
Displays the
previous frame
Displays the
next frame
q
button
Displays the frame
that is stored 10
frames ahead
Displays the frame
that is stored 10
frames back
Each time you turn the control dial towards
U
, the
image is incrementally enlarged from 2x to 14x.
Control dial
S
button
Playing back
images
Pressing the
q
button displays the last picture taken.
Close-up
playback
Erasing images
Play back the image you want to erase and press the
S
button.
Use
ac
to select
[YES]
and press the
i
button to
erase.
Arrow pad
ERASE
YES
NO
CANCEL SELECT
GO
E-450_MASTER.fm Seite 18 Donnerstag, 16. April 2009 10:40 10
Basic guide
19
EN
Indications used in this manual
The operation button icons on the body of the camera are used to indicate the operation
buttons in this manual. See “Names of parts and functions” (
g
P. 2 ) .
In this manual,
j
indicates the control dial.
The following symbols are used throughout this manual.
To make the most of this manual
You can use the “Table of Contents” (P. 20) or “Index” (P. 141) as well as the following
reference to search for information on camera functions and operations. Use this manual
according to shooting conditions and to find the desired information.
For information on the possible shooting functions:
g
“Shooting guides” (P. 31)
For information on how to operate the camera:
g
“Using the direct buttons” (P. 27)
“Using the super control panel” (P. 28)
“Using the menu” (P. 29)
Functions available during live view:
g
“Using live view” (P. 36)
To search for a function from a list:
g
“Menu directory” (P. 123)
“Index” (P. 141)
x
Notes
Important information on factors which may lead to a
malfunction or operational problems. Also warns of operations
that should be absolutely avoided.
Useful information and hints that will help you get the most out
of your camera.
g
Reference pages describing details or related information.
TIPS
Preparations for shooting
E-450_MASTER.fm Seite 19 Donnerstag, 16. April 2009 10:40 10
20
EN
Table of Contents
Names of parts and functions .......................................................................................... 2
Camera ........................................................................................................... 2
Mode dial......................................................................................................... 4
Viewfinder........................................................................................................ 6
Super control panel......................................................................................... 7
LCD monitor (Live view).................................................................................. 8
LCD monitor (Playback) .................................................................................. 9
Preparations for shooting............................................................................................... 10
Unpack the box contents............................................................................... 10
Preparing the battery......................................................................................11
Attaching a lens to the camera...................................................................... 12
Loading the card ........................................................................................... 13
Power on....................................................................................................... 14
Setting the date/time ..................................................................................... 15
Shooting........................................................................................................ 16
Playback/Erasing .......................................................................................... 18
Indications used in this manual ..................................................................... 19
Using the direct buttons ................................................................................................. 27
Using the super control panel ........................................................................................ 28
Using the menu.............................................................................................................. 29
Resetting to the factory default settings......................................................................... 30
Basic function guides..................................................................................................... 31
Focus – Operating the shutter button............................................................ 31
Brightness – Exposure compensation........................................................... 31
Color – White balance................................................................................... 32
A guide to functions for different subjects...................................................................... 32
Taking landscape pictures............................................................................. 32
Taking flower pictures.................................................................................... 33
Taking night scene pictures........................................................................... 35
Basic guide 2
Identifies the camera part names and describes the basic steps for shooting and playback.
1 Basic camera operations 26
Describes the basic operations of the camera.
2
Shooting guides – Improving your shooting skills 31
Describes shooting methods for various shooting situations.
E-450_MASTER.fm Seite 20 Donnerstag, 16. April 2009 10:40 10
21
EN
Activating live view......................................................................................................... 36
Functions available during live view.............................................................. 36
The live view mechanism .............................................................................. 37
Taking a picture using live view...................................................................................... 37
AF operation during live view ........................................................................ 38
Using the face detection function................................................................................... 39
Taking a picture using manual focus.............................................................................. 40
Switching the information display................................................................................... 40
Taking a picture while comparing the effect................................................................... 41
Enlarged display operation ............................................................................................ 41
Panorama shooting........................................................................................................ 42
Program shooting........................................................................................................... 43
Aperture priority shooting............................................................................................... 43
Shutter priority shooting................................................................................................. 44
Manual shooting............................................................................................................. 45
Bulb shooting ................................................................................................ 46
Preview function............................................................................................................. 46
Changing the metering mode......................................................................................... 47
Exposure compensation ................................................................................................ 48
AE lock........................................................................................................................... 49
AE bracketing................................................................................................................. 49
ISO sensitivity setting..................................................................................................... 50
AF mode selection ......................................................................................................... 51
S-AF (single AF)............................................................................................ 51
C-AF (continuous AF) ................................................................................... 52
MF (manual focus) ........................................................................................ 52
Simultaneous use of S-AF mode and MF mode (S-AF+MF) ........................ 52
Simultaneous use of C-AF mode and MF mode (C-AF+MF)........................ 53
AF target selection......................................................................................................... 53
Focus lock – If correct focus cannot be obtained........................................................... 54
Sequential shooting ....................................................................................................... 55
Self-timer shooting......................................................................................................... 56
Remote control shooting................................................................................................ 57
Anti-shock ......................................................................................................................58
3 Using live view 36
Functions and operations available only during live view will be explained.
4 Exposure 43
Describes functions related to exposure, which is important for shooting. These functions
are for determining the aperture value, shutter speed, and other settings by measuring the
brightness in the picture.
5 Focusing and shooting functions 51
Describes the optimal focusing methods according to the subject and shooting conditions.
E-450_MASTER.fm Seite 21 Donnerstag, 16. April 2009 10:40 10
22
EN
Selecting the record mode............................................................................................. 59
Recording formats......................................................................................... 59
Selecting the record mode ............................................................................ 60
Selecting the white balance ........................................................................................... 60
Setting the auto/preset/custom white balance .............................................. 61
WB compensation......................................................................................... 62
Setting the one-touch white balance ............................................................. 63
Picture mode.................................................................................................................. 63
Gradation .......................................................................................................................64
Noise reduction.............................................................................................................. 65
Noise filter...................................................................................................................... 65
Flash mode setting......................................................................................................... 66
Built-in flash shooting..................................................................................................... 68
Flash intensity control .................................................................................................... 69
External flash shooting................................................................................................... 70
Shooting with the Olympus wireless RC flash system................................................... 71
Using commercially available flashes ............................................................................ 73
Single-frame/Close-up playback.................................................................................... 74
Index display/Calendar display ...................................................................................... 75
Information display......................................................................................................... 76
Slideshow.......................................................................................................................77
Rotating images............................................................................................................. 77
Playback on TV.............................................................................................................. 78
Editing still images ......................................................................................................... 78
Copying images ............................................................................................................. 80
Protecting images .......................................................................................................... 81
Erasing images .............................................................................................................. 82
6 Record mode, white balance, and picture mode 59
Describes image adjustment functions specific to digital cameras.
7 Flash shooting 66
Describes how to shoot with the built-in flash and an external flash.
8 Playback functions 74
Describes the functions for image playback.
E-450_MASTER.fm Seite 22 Donnerstag, 16. April 2009 10:40 10
23
EN
Custom Menu 1.............................................................................................................. 83
a
AF/MF ....................................................................................................................... 83
AF ILLUMINAT............................................................................................... 83
FOCUS RING................................................................................................ 83
RESET LENS................................................................................................ 83
BULB FOCUSING......................................................................................... 83
b
BUTTON/DIAL .......................................................................................................... 83
DIAL FUNCTION........................................................................................... 83
DIAL DIRECTION ......................................................................................... 84
AEL/AFL........................................................................................................ 84
AEL/AFL MEMO............................................................................................ 85
7
FUNCTION............................................................................................... 85
j
FUNCTION............................................................................................. 85
c
DISP/
8
/PC.............................................................................................................. 86
8
................................................................................................................. 86
SLEEP........................................................................................................... 86
BACKLIT LCD (Backlight timer).................................................................... 86
USB MODE................................................................................................... 86
LIVE VIEW BOOST....................................................................................... 87
g
FACE DETECT........................................................................................ 87
FRAME ASSIST (Ruled lines display) .......................................................... 87
d
EXP/
e
/ISO ............................................................................................................ 87
ISO-AUTO SET............................................................................................. 87
ISO-AUTO..................................................................................................... 87
AEL Metering ................................................................................................ 87
BULB TIMER................................................................................................. 87
e
#
CUSTOM.............................................................................................................. 87
w
+
F
........................................................................................................... 87
AUTO POP UP.............................................................................................. 88
f
K
/COLOR/WB........................................................................................................ 88
ALL
>
...................................................................................................... 88
COLOR SPACE............................................................................................. 88
K
SET ........................................................................................................ 88
PIXEL COUNT .............................................................................................. 88
g
RECORD/ERASE ..................................................................................................... 89
RAW+JPEG ERASE ..................................................................................... 89
FILE NAME ................................................................................................... 89
dpi SETTING................................................................................................. 89
Custom Menu 2.............................................................................................................. 90
CF/xD............................................................................................................ 90
s
(Monitor brightness adjustment)............................................................. 90
W
(Changing the display language) ........................................................ 90
VIDEO OUT .................................................................................................. 90
REC VIEW .................................................................................................... 90
FIRMWARE................................................................................................... 90
9 Customizing your camera 83
Describes how to customize the camera’s settings.
E-450_MASTER.fm Seite 23 Donnerstag, 16. April 2009 10:40 10
24
EN
Print reservation (DPOF) ............................................................................................... 91
Print reservation............................................................................................ 91
Single-frame reservation............................................................................... 91
All-frame reservation..................................................................................... 92
Resetting the print reservation data .............................................................. 92
Direct printing (PictBridge)............................................................................................. 93
Connecting the camera to a printer............................................................... 94
Easy printing ................................................................................................. 94
Custom printing............................................................................................. 95
Flowchart .......................................................................................................................97
Using the provided OLYMPUS Master software............................................................ 97
What is OLYMPUS Master?.......................................................................... 97
Connecting the camera to a computer........................................................................... 98
Start up the OLYMPUS Master software........................................................................ 99
Displaying camera images on a computer..................................................................... 99
Downloading and saving images .................................................................. 99
Disconnecting the camera from your computer ............................................ 99
Viewing still images...................................................................................................... 101
To increase the number of languages.......................................................................... 101
Transferring images to your computer without using OLYMPUS Master..................... 102
Shooting tips and information ...................................................................................... 103
Tips before you start taking pictures............................................................ 103
Shooting tips ............................................................................................... 103
Additional shooting tips and information...................................................... 106
Playback tips............................................................................................... 108
Viewing pictures on a computer.................................................................. 108
Error codes .................................................................................................................. 109
Camera maintenance....................................................................................................111
Cleaning and storing the camera .................................................................111
Cleaning mode – Removing dust .................................................................112
Pixel mapping – Checking the image processing functions .........................112
10 Printing 91
Describes how to print your pictures.
11 Using the OLYMPUS Master software 97
Describes how to transfer and store your camera images to a computer.
12 Shooting tips and maintenance 103
Refer to this section for troubleshooting and camera maintenance information.
E-450_MASTER.fm Seite 24 Donnerstag, 16. April 2009 10:40 10
25
EN
Card basics...................................................................................................................113
Usable cards ................................................................................................113
Formatting the card......................................................................................114
Battery and charger ......................................................................................................114
Using your charger abroad ...........................................................................................114
Interchangeable lenses.................................................................................................115
ZUIKO DIGITAL interchangeable lens .........................................................115
ZUIKO DIGITAL lens specifications .............................................................116
Program line diagram (
P
mode) ...................................................................................118
Exposure warning display.............................................................................................118
Flash modes that can be set by shooting mode ...........................................................119
White balance color temperature................................................................................. 120
Record mode and file size/number of storable still pictures......................................... 121
Functions that can be registered in Custom Reset Settings........................................ 122
Menu directory ............................................................................................................. 123
Glossary....................................................................................................................... 126
Specifications............................................................................................................... 129
E-System Chart............................................................................................................ 132
SAFETY PRECAUTIONS............................................................................................ 134
Index ............................................................................................................................ 141
13 Information 113
Refer to this section for information on optional accessories, camera specifications, and
other useful shooting information.
E-450_MASTER.fm Seite 25 Donnerstag, 16. April 2009 10:40 10
1
Basic camera operations
1
26
EN
Basic camera operations
There are three basic ways to make function settings with this camera.
1 Using the direct buttons to operate the camera P. 27
You can make the function settings by rotating the control dial while pressing the direct buttons
assigned to a function.
2 Setting while looking at the super control panel P. 28
You can make the function settings with the super control panel on the LCD monitor. You can
use the super control panel to view the current settings and directly change the settings.
3 Setting on the menu P. 29
You can use the menu to set shooting and playback settings and customize camera functions.
Descriptions in this manual
The operating instructions of the direct buttons, super control panel and menu are described as
follows in this manual.
“+”
indicates operations performed at the same time.
indicates you should proceed to the next step.
e.g.: When setting the flash intensity control
Direct button
#
+
Fj
Super control panel
ip
: [
w
]
Menu
MENU
[
X
]
[
w
]
E-450_MASTER.fm Seite 26 Donnerstag, 16. April 2009 10:40 10
Basic camera operations
1
27
EN
1
Press the button for the function you want to set.
The direct menu is displayed.
2
Turn the control dial to change the setting.
Press the
i
button to confirm your setting. Or if you do not operate the control dial within a few
seconds, your setting will be confirmed and the super control panel screen will be restored.
List of direct buttons
The functions assigned to buttons are as shown below.
To assign other functions so they can be set with direct buttons:
j
You can also assign frequently used functions to the
b
and
<
/
Y
/
j
buttons.
g
7
FUNCTION” (P. 85), “
j
FUNCTION” (P. 85)
Using the direct buttons
No. Direct buttons Function Ref. page
1
<
/
Y
/
j
Remote control/Self-timer/
Sequential shooting button
Remote control/Self-timer/
Sequential shooting
P. 55–58
2
F
Exposure compensation button Exposure compensation P. 48
3
u
Live view button Turns live view on or off P. 36
4
#
Flash button
Pops up the flash and sets
flash mode
P. 6 6
2
+
4
F
+
#
Exposure compensation button
Flash button
Flash intensity control P. 69
TIPS
SELECT GO
Direct menu
Control dial
e.g.) Setting Sequential/Self-timer/
Remote control shooting
2
1
4
3
E-450_MASTER.fm Seite 27 Donnerstag, 16. April 2009 10:40 10
1
Basic camera operations
28
EN
Select an item on the super control panel and change the setting.
1
Press the
INFO
button to display the super control
panel on the LCD monitor.
Press the
INFO
button again to turn off the super control
panel.
Press the
i
button during live view to display the super
control panel.
4
Use the control dial to change the setting.
Press the
i
button to display the direct menu indicated at
the position of the cursor. You can also use the direct
menu to change the setting. After changing the setting,
press the
i
button to confirm your setting. If no operation
is made within a few seconds, your setting is confirmed
and the super control panel is displayed.
Using the super control panel
2
Press the
i
button.
The cursor on the super control panel
lights.
3
Use
p
to move the cursor to the
function you want to set.
For details on the functions that can be set with the super control panel, refer to
“Super control panel” (
g
P. 7 ) .
Control dial
p
Arrow pad
i
button
INFO
button
2008. 08.16
AF
arge
Normal
OFF
arge
Normal
OFF
ISO
Cursor
The name of the selected
function is displayed.
arge
Normal
OFF
METERING
METERING
SELECT GO
Direct menu
E-450_MASTER.fm Seite 28 Donnerstag, 16. April 2009 10:40 10
Basic camera operations
1
29
EN
1
Press the
MENU
button.
The menu is displayed on the LCD monitor.
4
Press the
i
button to confirm your settings.
Press the
i
button repeatedly to exit the menu.
Using the menu
2
Use
ac
to select a tab
and
d
to set an item.
3
Use
ac
to select a function and
d
to go to the
setting screen.
For details on the functions that can be set with the menu, refer to “Menu
directory” (
g
P. 123).
MENU
button
p
Arrow pad
i
button
CARD SETUP
NORM
AUTO
CUSTOM RESET
PICTURE MODE
GRADATION
WB
CANCEL SELECT
GO
N
Operation guide is displayed at the bottom of the screen.
: Press the
MENU
button to cancel the setting.
:Press
dac
on the arrow pad to move the cursor and select an item.
The symbols displayed on the LCD monitor correspond to the arrow pad
shown below.
t
:
a
u
:
c
8
:
d
7
:
b
: Press the
i
button to confirm your settings.
MENU
CANCEL
SELECT
OK
GO
Tab The current setting
is displayed
METERING
S-AF
0.0
OFF
OFF
RC MODE
AF MODE
AF AREA
ANTI-SHOCK
z
AUTO
CANCEL SELECT
GO
S-AF
AUTO
0.0
METERING
OFF
OFF
RC MODE
AF MODE
AF AREA
ANTI-SHOCK
z
CANCEL SELECT
GO
Function
METERING
RC MODE
AF MODE
AF AREA
ANTI-SHOCK
CANCEL SELECT
GO
METERING
Types of tabs
W
(Shooting menu 1)
Sets shooting functions.
X
(Shooting menu 2)
Sets shooting functions.
q
(Playback menu)
Sets playback functions.
Y
(Custom menu 1)
Customizes shooting functions. Depending on the
function being customized, the function is further
separated into 8 tabs (A to H).
Z
(Custom menu 2)
Sets the basic functions of the camera.
AF/MF
BUTTON/DIAL
DISP/
8
/PC
EXP/
e
/ISO
#
CUSTOM
CANCEL SELECT
GO
K
/COLOR/WB
Screenshot of menu with the
Y
tab selected
Tab
E-450_MASTER.fm Seite 29 Donnerstag, 16. April 2009 10:40 10
1
Basic camera operations
30
EN
Normally, current camera settings (including any changes you have made) are retained when
the power is turned off. To reset the camera to the factory default settings, set
[RESET]
. You
can register settings in advance to
[RESET1]
and
[RESET2]
. The camera settings at that time
are registered in
[RESET1]
and
[RESET2]
. For details on the registered functions, refer to
“Functions that can be registered in Custom Reset Settings” (
g
P. 122).
Registering [RESET1]/[RESET2]
1
Select either [RESET1]/[RESET2] to register and press
d
.
If settings have already been registered,
[SET]
is displayed next to
[RESET1]
/
[RESET2]
.
Selecting
[SET]
again overwrites the registered setting.
To cancel the registration, select
[RESET]
.
2
Select [SET] and press the
i
button.
Using reset settings
You can reset the camera to
[RESET1]
or
[RESET2]
setting or restore the factory default
settings.
[RESET]
: Resets to the factory default settings. For the default settings, see
“Menu directory” (
g
P. 123).
[RESET1]/[RESET2]
: Resets to the registered settings.
1
Select [RESET], [RESET1], or [RESET2] and press
the
i
button.
2
Use
ac
to select [YES], then press the
i
button.
Resetting to the factory default settings
Menu
MENU
[
W
]
[CUSTOM RESET]
Menu
MENU
[
W
]
[CUSTOM RESET]
RESET1
YES
NO
CANCEL SELECT
GO
E-450_MASTER.fm Seite 30 Donnerstag, 16. April 2009 10:40 10
2
Shooting guides – Improving your shooting skills
2
31
EN
Shooting guides –
Improving your shooting skills
To familiarize yourself with the camera, you can start off by taking pictures of surrounding
subjects, such as children, flowers and pets. If the pictures taken are not to your liking, try
adjusting some of the settings below. You can take more satisfying pictures simply by
familiarizing yourself with these basic camera functions.
Focus – Operating the shutter button
A picture can become out of focus when the focus in the
picture is on the foreground, background, or other objects in
the picture instead of on the subject. To prevent out-of-focus
pictures, be sure to focus on the subject you are trying to
capture. The shutter button can be pressed halfway down
(half-press) and all the way down (full press). Once you are
able to operate the shutter button effectively, you can focus
accurately even on moving subjects.
g
“Shooting” (P. 16), “Focus lock – If correct focus cannot
be obtained” (P. 54)
Even when the subject is in focus, the picture can become
blurred if you move the camera while the shutter button is
being pressed. This is called “camera shake”. Make sure
how to properly hold the camera. The camera is particularly
subject to shaking when using live view to take pictures while
viewing the subject on the monitor.
g
“Holding the camera” (P. 17)
In addition to incorrect focusing and camera shake, movement of the subject can also cause
blurring of the picture. In this case, use a shutter speed that matches the motion of the subject.
You can confirm the actual shutter speed and aperture on the displays of the viewfinder and
monitor by pressing the shutter button halfway.
g
“Viewfinder” (P. 6), “Super control panel” (P. 7), “LCD monitor (Live view)” (P. 8)
Brightness – Exposure compensation
The camera automatically determines the aperture value and
shutter speed according to the brightness level. This is called
auto exposure. However, you may not be able to capture the
intended picture with auto exposure alone. In this case, you
can increase or decrease the auto exposure setting.
Compensate the exposure toward + to enhance the
brightness of a summer beach or the whiteness of snow.
Compensate the exposure toward – when the area to be
shot is brighter but smaller compared to its surrounding area.
If you are unsure of how much exposure compensation is
required, try taking several pictures at various settings and
then compare the pictures.
g
“Exposure compensation” (P. 48), “AE bracketing” (P. 49)
Basic function guides
Halfway
down:
All the way
down:
E-450_MASTER.fm Seite 31 Donnerstag, 16. April 2009 10:40 10
32
EN
2
Shooting guides – Improving your shooting skills
Color – White balance
Besides sunlight, there are other sources for illuminating the subject, such as tungsten and
fluorescent lighting. These types of lighting contain particular colors; therefore, the same white
object shot under different lighting has slightly different colors. Even under the same sunlight,
the colors in the picture differ depending on the sky conditions, the shadows of trees or
buildings, and other factors. White balance automatically corrects the effects from these types
of lighting and enables shooting with the right colors. You can usually obtain the right colors
with the white balance set to
[AUTO]
. Depending on the shooting conditions, however, you may
not be able to obtain the intended colors. In this case, change the setting accordingly.
g
“Selecting the white balance” (P. 60)
This section describes the functions suitable under different shooting conditions depending on
the subject.
Taking landscape pictures
This section describes how to take outdoor scenery pictures of forests, lakes and beaches in
daylight.
Changing shooting mode
The proper shooting method varies depending on whether
you are trying to capture the silence of a still scene or the
dynamism of a motion scene.
To capture the depth of a forest, focus with a wider range of
the image. Use
A
(aperture priority shooting) mode and
close the aperture (increase the aperture value) as much
as possible.
To capture the waves crashing against the seashore, use
S
(shutter priority shooting) mode and select a fast shutter
speed. To capture a flowing waterfall or river, shoot using a
slow shutter speed.
Exposure compensation can be used even under different shooting modes. Check the image
that you have shot and use + or – to adjust the exposure to obtain better results.
A guide to functions for different subjects
Fluorescent light
Tungsten light Shade of tree
E-450_MASTER.fm Seite 32 Donnerstag, 16. April 2009 10:40 10
Shooting guides – Improving your shooting skills
2
33
EN
Changing white balance
The color of water in pictures appears different depending on
whether it is a lake reflecting nearby trees or a seashore
surrounded by a coral reef. To capture the subtle difference
in color, try changing the white balance setting. Change the
setting for different situations, such as by using
[
5
5300K]
for sunny days and
[
2
7500K]
for outdoor shaded areas on
sunny days.
Changing metering mode
Depending on the depth of the water and the direction of the sun,
the brightness of the water can differ significantly in different areas
of the same composition. There is also a difference in the
brightness of forests depending on the way the trees overlap each
other. If you know which areas you want to emphasize the
compensation in the image composition, you can change the
metering mode. When set to
[
e
]
(Digital ESP metering), the
camera automatically assesses the brightness in the composition
and determines the exposure. To emphasize a specific partial
exposure in the composition, change the metering mode to
[
J
]
(center weighted metering) or
[
n
]
(spot metering), adjust the
metering area to the locations that you want to adjust the exposure
and then measure the exposure.
Changing saturation
There may be times when you cannot reproduce the desired color even when using white
balance or exposure compensation. In this case, you can change the
[SATURATION]
setting to
achieve the desired color. The
[SATURATION]
setting includes two levels of high and low
settings. When the setting is high, a vivid color is used.
g
“Aperture priority shooting” (P. 43), “Shutter priority shooting” (P. 44), “Changing the
metering mode” (P. 47), “Exposure compensation (P. 48), “Selecting the white balance (P. 60),
“[SATURATION] : Vividness of the color” (P. 64)
Taking flower pictures
The proper method for taking pictures of flowers differs depending on whether you want to
capture, for example, a single flower, a field of blooming flowers, a deep red rose, or the light
color of a sweet pea.
Changing white balance
There are many colors of flowers ranging from light to vivid
ones. Depending on the colors of the flowers, subtle color
shades may not be captured as seen. In this case, you can
check the light conditions and change the white balance
setting. At
[AUTO]
, the camera automatically determines the
type of light and shoots using the proper white balance.
However, you can bring out subtle color shades more
effectively by changing the setting according to shooting
conditions, such as by using
[
5
5300K]
for sunny days and
[
2
7500K]
for outdoor shaded areas on sunny days.
E-450_MASTER.fm Seite 33 Donnerstag, 16. April 2009 10:40 10
34
EN
2
Shooting guides – Improving your shooting skills
Using exposure compensation
When shooting flowers against a background, select as
simple a background as possible to bring out the shape and
color of the flower. When shooting bright and whitish flowers,
adjust the exposure compensation to – (minus) so that the
flower stands out from the darker background.
Changing shooting mode
The proper shooting method when taking pictures of flowers differs
depending on whether you want to emphasize a single flower or
capture a field of flowers. To change the focus area, set the camera
to
A
(aperture priority shooting) mode and select the aperture value.
When you open the aperture (decrease the aperture value), the
camera focuses within a shorter range (with a shallow depth of
field), emphasizing the subject against a blurred background.
When you close the aperture (increase the aperture value), the
camera focuses over a wider range (with more depth of field),
producing a picture with both the foreground and background in
focus.
You can use the preview function to confirm the changes in the depth
of field when the aperture is changed.
Using live view
When using a conventional digital single-lens reflex camera with interchangeable lens system,
it was necessary to wait until after taking the picture to check the results of the exposure
compensation and white balance settings. With the live view function of this camera, however,
you can use the monitor to display and check the subject you want to capture.
Changing lenses
When the blooming flowers are few and sparse, take the picture using a telephoto lens. With a
telephoto lens, you take pictures in which subjects at different distances appear closer together,
giving the impression of a more densely blooming flower field. Using the telescopic feature of
the zoom lens also achieves the same effect, but it is easier to achieve this effect when the
focal length of the lens is longer, such as 150 mm or 200 mm, rather than 54 mm.
g
“Aperture priority shooting” (P. 43), “Using live view” (P. 36), “Exposure
compensation” (P. 48), “Selecting the white balance” (P. 60)
E-450_MASTER.fm Seite 34 Donnerstag, 16. April 2009 10:40 10
Shooting guides – Improving your shooting skills
2
35
EN
Taking night scene pictures
There are different types of night scenes, from the afterglow of a sunset and city lights at night
to special light displays and firework displays.
Using a tripod
Because a slow shutter speed is needed to capture night
scenes, a tripod is required to prevent camera shake. If a
tripod is not available, you should place the camera on a
stable surface to prevent camera shake. Even if the camera
is secured, camera shake may occur when pressing the
shutter button. Therefore, it is recommended to use the
remote control or self timer.
Changing shooting mode
Night scenes have different levels of brightness, and the balance of the brightness in the
composition is not uniform. Start by using
A
(aperture priority shooting) mode to take the
picture. Set the aperture to the medium setting (about F8 or F11) and allow the camera to
automatically select the shutter speed. When shooting a night scene, because the camera sets
the exposure to match the dark areas which occupy a majority of the composition and the
image often turns out whitish (overexposed), adjust the exposure compensation to –1 or –1.5.
Use
[REC VIEW]
to check the image and adjust the aperture and exposure compensation as
necessary.
Image noise can easily occur when shooting at slow shutter speeds. In this case, set
[NOISE
REDUCT.]
to
[ON]
to reduce noise.
Using manual focus
In cases where you cannot use AF (auto focus) to focus on the
subject because the subject is too dark or you cannot focus in time
to take pictures, such as during a fireworks display, set the AF mode
to
[MF]
(manual focus) and focus manually. To take pictures of night
scenes, turn the focus ring of the lens and check whether you can
see the lights of the night scene clearly. To take pictures of a
fireworks display, adjust the focus of the lens to infinite unless you
are using a long focus lens. If you know the approximate distance to
the subject, it is recommended that you focus on something that is at
the same distance in advance.
g
“Program shooting” (P. 43), “Aperture priority shooting” (P. 43),
“Remote control shooting” (P. 57), “AF mode selection” (P. 51),
“Noise reduction” (P. 65), “REC VIEW” (P. 90)
E-450_MASTER.fm Seite 35 Donnerstag, 16. April 2009 10:40 10
3
Using live view
3
36
EN
Using live view
It is possible to use the LCD monitor as a viewfinder. You can view the exposure or white
balance effect and the subject’s composition while you take the picture.
1
Press the
u
button.
The mirror is raised and the subject is displayed on the LCD
monitor.
When
[AF MODE]
was set to
[C-AF]
, it will be set
automatically to
[S-AF]
(or
[S-AF+MF]
in case it was set to
[C-AF+MF]
).
Functions available during live view
The following functions can be used during live view.
Focusing during live view
Taking a picture after selecting the AF system
g
P. 3 7
Taking a picture using focus lock
g
P. 3 8
Taking a picture while adjusting the focus manually
g
P. 4 0
Taking a picture while focusing on a face
g
P. 3 9
Taking a picture while checking the focus by enlarging the zone to be focused
g
P. 4 1
Taking a picture while checking the effect
Taking a picture after comparing the effect of exposure compensation or white
balance
g
P. 4 1
Taking a panoramic picture
g
P. 4 2
Switching the indications on the LCD monitor
Turning off the information display/Displaying the histogram or ruled lines
g
P. 4 0
Checking the subject on the monitor even in low light situations
g
P. 8 7
x
Notes
If there is a high-intensity light source within the screen, the image may be displayed darker but
will be recorded normally.
If the live view function is used over a long period, the temperature of the image pickup device
rises causing images with high ISO sensitivity to appear noisy and unevenly colored. Either
lower the ISO sensitivity or turn off the camera for some time.
Exchanging the lens will cause live view to stop.
The following functions are not available during live view.
C-AF/AE lock/[AEL/AFL]
When
[IMAGER AF]
is selected, you cannot use the AF illuminator.
Activating live view
u
button
E-450_MASTER.fm Seite 36 Donnerstag, 16. April 2009 10:40 10
Using live view
3
37
EN
The live view mechanism
During live view, the image on the LCD monitor is the same image received by the image pickup
device (Live MOS sensor/imager) that is used for shooting. This way you can check on the LCD
monitor the effects of exposure compensation or white balance. Moreover, you can also enlarge
part of the subject to focus on it or display ruled lines to check that the composition is level.
While the image appears on the LCD monitor during live view, the mirror is raised and the
shutter is open. Therefore, you will not be able to check the subject in the viewfinder.
Correct metering may not be possible if strong light is coming in through the viewfinder. In such
case attach the eyepiece cover.
g
“Eyepiece cover” (P. 56)
In live view you can choose one of 3 available AF systems. The
[LIVE VIEW AF MODE]
setting
will determine when and how focusing is performed.
Characteristics of the live view AF mode
*
For the latest information about Olympus lenses compatible with Imager AF, visit the Olympus
website. When you are using a lens that is not compatible with
[IMAGER AF]
,
[HYBRID AF]
will be
selected automatically.
Taking pictures using the viewfinder Taking pictures using live view
The light coming in through the lens
is reflected on the mirror and you can check the
subject in the viewfinder.
The mirror is raised and the shutter is open.
The image received by image pickup device
is displayed on the LCD monitor.
Taking a picture using live view
Menu
MENU
[
Y
]
[
a
]
[LIVE VIEW AF MODE]
LIVE VIEW AF
MODE
Using the shutter button
Focus lock
Restrictions on
use
AF
AREA
Halfway down
All the way
down
IMAGER AF
(factory default
setting)
AF operation
using the
imager
Shooting
Press the shutter button
halfway or press the
AEL/AFL
button.
* Only possible
with compatible
lenses.
11 AF
targets
AF SENSOR
k
AF operation
using the AF
sensor and
then shooting
While holding down the
AEL/AFL
button, press
the shutter button all the
way.
None
3 AF
targets
HYBRID AF
AF operation
using the
imager
(approximate
focus)
AF operation
using the AF
sensor and
then shooting
While holding down the
AEL/AFL
button, press
the shutter button all the
way.
None
3 AF
targets
Viewfinder
Image pickup
device
Shutter curtain
Mirror
Lens
E-450_MASTER.fm Seite 37 Donnerstag, 16. April 2009 10:40 10
3
Using live view
38
EN
Taking a picture with [IMAGER AF]
1
Press the shutter button halfway.
When the focus is locked, the AF confirmation mark and
AF target mark light up.
2
Press the shutter button all the way to take a
picture.
Taking a picture with [AF SENSOR]
1
Press the shutter button all the way.
The mirror is lowered and the picture is taken after the
focus is locked.
The image that was displayed on the monitor before
lowering the mirror freezes during focusing.
If correct focus cannot be obtained, you will hear the sound
of the shutter but the picture will not be taken.
To focus in advance, hold down the
AEL
/
AFL
button and
press the shutter button. When the focus is locked, the AF
confirmation mark lights up. When the AF confirmation
mark is blinking, the focus is not locked.
Taking a picture with [HYBRID AF]
1
Press the shutter button halfway.
The Imager AF will be activated and you can check the
subject on the LCD monitor.
When the Imager AF achieves approximate focus, the
n
mark lights up.
2
Press the shutter button all the way.
The picture is taken in a similar way as when using
[AF SENSOR]
.
AF operation during live view
[IMAGER AF]
When you press the shutter button halfway, AF is performed by the image pickup device. 11
available AF targets allow you to focus on a subject even if it does not appear in the center of
the picture.
[AF SENSOR]
When you press the shutter button all the way, the AF is activated and the picture is taken in the
same way as when taking pictures using the viewfinder (AF is not activated on pressing the
shutter button halfway).
250250 F5.6F5.6
L
NN
3 838
I
-
AF
AF confirmation mark
AF target mark
250250 F5.6F5.6
L
NN
3 838
AF confirmation mark
250250 F5.6F5.6
L
NN
3 838
o
n
mark
E-450_MASTER.fm Seite 38 Donnerstag, 16. April 2009 10:40 10
Using live view
3
39
EN
[HYBRID AF]
When you press the shutter button halfway, focusing is performed approximately by the Imager
AF and you can check the subject on the LCD monitor. When you press the shutter button all
the way, the AF is activated in the same way as with the
[AF SENSOR]
setting. The
approximate focusing distance is obtained when the shutter button is pressed halfway so the
time it takes to actually take the picture after pressing the shutter button all the way is
shortened. When using S-AF+MF, this is very convenient as you can hold the shutter button
pressed halfway and finely adjust the focus while checking the LCD monitor.
Camera status during AF
By setting
[
g
FACE DETECT]
to
[ON]
, the camera will detect people’s faces in the frame and
adjust the focus and metering automatically.
In order to use
b
,
[Fn FACE DETECT]
needs to be set up in the menu in advance.
g
7
FUNCTION” (P. 85)
After setting
[
g
FACE DETECT]
to
[ON]
while using
b
, the following functions are
automatically set to the best settings for taking pictures of people.
Imager AF AF Sensor
AF is performed by the image pickup device.
The mirror is lowered and AF is performed by the
AF sensor. (The mirror is down so the image
display on the monitor freezes just before pressing
the shutter button all the way.)
Using the face detection function
Direct button
b
(The setting changes each time the button is pressed.)
Super control panel
ip
[
g
FACE DETECT]
Menu
MENU
[
Y
]
[
c
]
[
g
FACE DETECT]
[ON]
Function Setting Ref. page
METERING
e
P. 4 7
GRADATION AUTO P. 64
LIVE VIEW AF MODE IMAGER AF P. 37
AF MODE S-AF (
B
)P.51
Halfway down
All the way down
AF Sensor
E-450_MASTER.fm Seite 39 Donnerstag, 16. April 2009 10:40 10
3
Using live view
40
EN
1
If the camera detects a face, a frame will be
displayed in that location.
When you press the shutter button, the camera will focus
on the position of the face detection frame (however, if a
single AF target is selected with
[AF AREA]
, the camera
will focus on the AF target selected).
With
[AF SENSOR]
or
[HYBRID AF]
, the camera will
focus on the AF target that is closest to the face detection
frame.
x
Notes
During sequential shooting, face detection will work only at the first shot.
Depending on the subject, the camera may not be able to correctly detect the face.
During live view, you can take a picture focusing manually while checking the focus on the LCD
monitor.
1
Set the AF mode to [S-AF+MF] or [MF].
g
“AF mode selection” (P. 51)
2
Adjust the focus by rotating the focus ring.
In
[S-AF+MF]
mode, after pressing the shutter button halfway or pressing the
AEL
/
AFL
button,
you can rotate the focus ring to finely adjust the focus before taking the picture.
Using the enlarged display can be very convenient when adjusting the focus manually.
g
“Enlarged display operation” (P. 41)
You can switch the information displayed on the monitor by pressing
INFO
button repeatedly.
Taking a picture using manual focus
Switching the information display
250250 F5.6F5.6
3 838
L
NN
250
250250
F5.6
F5.6
3 8
38
L
N
N
250250 F5.6F5.6
3 838
250
250
F5.6
F5.6
3 8
38
250
250
F5.6
F5.6
3 8
38
Information display
on
Information display on
+ Ruled lines display
(
g
P. 8 7 )
Information display on
+ Histogram
Enlarged display
(
g
P. 4 1 )
Information display
off
GOWB
/
F
+0.7+0.7 +1.0+1.0
0.00.0 +0.3+0.3
Comparison screen
(
g
P. 4 1 )
E-450_MASTER.fm Seite 40 Donnerstag, 16. April 2009 10:40 10
Using live view
3
41
EN
You can check the effect of exposure compensation or white balance on a 4-split screen.
1
Press the INFO button repeatedly to display the
comparison screen.
g
“Switching the information display” (P. 40)
The exposure compensation comparison screen is
displayed. Press
a
to switch to the white balance
comparison screen. Press
ac
to switch the screen.
2
Use
bd
or the control dial to select the setting
value, then press the
i
button.
You can take the picture using the set value.
x
Notes
Exposure compensation is not available in
M
mode.
This function cannot be used in
g
mode.
It is possible to enlarge the subject for display. Enlarging the image during MF makes focus
confirmation and adjustment easier.
1
Press the
INFO
button repeatedly to display the enlarged display.
g
“Switching the information display” (P. 40)
The enlargement frame will be displayed.
2
Use
p
to move the frame and press the
i
button.
The area inside the frame is enlarged and displayed.
Press and hold the
i
button to return the enlargement frame to the center after it was moved.
3
Turn the control dial to change the magnification (7x/10x).
Taking the picture or pressing the
i
button will cancel the enlarged display.
During enlarged display, AF will not be activated even in the shutter button is pressed all the
way. You can take the picture after checking the focus in the enlarged display.
Taking a picture while comparing the effect
Enlarged display operation
GOWB
/
F
+0.7+0.7 +1.0+1.0
0.00.0 +0.3+0.3
250
250
F5.6
F5.6
3 8
38
i
button
E-450_MASTER.fm Seite 41 Donnerstag, 16. April 2009 10:40 10
3
Using live view
42
EN
You can enjoy panorama shooting easily using the OLYMPUS xD-Picture Card. Using
OLYMPUS Master (provided CD-ROM) to join a few images shot where the subject’s edges
overlap, you can create a single panorama composite image.
Panorama shooting is possible up to a maximum of 10 images.
Try your best to include the common parts of the overlapping images when shooting the
subject.
1
Set the mode.
g
“Setting the art filter/scene” (P. 5)
Live view is activated.
2
Use
p
to specify the direction for joining, then shoot the
subject with the edges overlapping.
d
: Joins the next image to the right.
b
: Joins the next image to the left.
a
: Joins the next image to the top.
c
: Joins the next image to the bottom.
Shoot while changing the composition such that the subject overlaps.
The focus, exposure, etc. will be determined at the first shot.
The
g
(warning) mark will be displayed after you have finished taking 10 shots.
Pressing the
i
button before shooting the first frame returns to the scene mode selection
menu.
Pressing the
i
button in the midst of shooting ends the sequence of panorama shooting,
and allows you to continue with the next one.
x
Notes
Panorama shooting cannot be done if the OLYMPUS xD-Picture Card is not loaded in the
camera.
During panorama shooting, the image previously taken for position alignment will not be
retained. With the frames or other markers for display in the images as a guide, set the
composition such that the edges of the overlapping images overlap within the frames.
Panorama shooting
250
250250
F5.6
F5.6
3 8
38
[
3
]
[
3
]
[
2
]
[
2
]
EXIT
EXIT
EXIT
EXIT
EXIT
EXIT
E-450_MASTER.fm Seite 42 Donnerstag, 16. April 2009 10:40 10
4
Exposure
4
43
EN
Exposure
The camera sets the optimum aperture value and shutter speed automatically according to the
subject brightness.
Set the mode dial to
P
.
When the shutter button is half-pressed, the shutter speed and
aperture value are displayed on the viewfinder. Releasing the shutter
button displays the shutter speed and aperture value on the super
control panel screen.
Program shift (
%
)
By turning the control dial in the
P
mode, you can change the combination of
aperture and shutter speed while maintaining the optimum exposure.
g
“Program line diagram (
P
mode)” (P. 118)
The program shift setting will not be canceled after shooting. To cancel program
shift setting, turn the control dial until the shooting mode indication
%
on the
viewfinder or super control panel changes to
P
or turn off the power.
Program shift is not available when you are using a flash.
The shutter speed and aperture value are blinking:
j
The optimum exposure cannot be obtained. For details, see “Exposure warning
display” (
g
P. 118).
The camera sets the optimum shutter speed automatically for the aperture value you have
selected. When you open the aperture (decrease the aperture value), the camera will focus
within a shorter range (shallow depth of field) and produce a picture with a blurred background.
When you close the aperture (increase the aperture value), the camera will focus within a
longer range. Use this mode when you wish to add changes to the background representation.
Before shooting, you can use the preview function to check how the background will look in
your picture.
g
“Preview function” (P. 46)
Program shooting
TIPS
Aperture priority shooting
250 F5.6
2008. 08.16
AF
arge
Normal
OFF
Shooting mode
Shutter speed
Aperture value
Super Control panel
Viewfinder
AF confirmation mark
Program shift
E-450_MASTER.fm Seite 43 Donnerstag, 16. April 2009 10:40 10
4
Exposure
44
EN
Set the mode dial to
A
and turn the control dial to set the aperture value.
To check the depth of field with the selected aperture value:
j
See “Preview function” (
g
P. 46).
Shutter speed is blinking:
j
The optimum exposure cannot be obtained. For details, see “Exposure warning
display” (
g
P. 118).
The camera sets the optimum aperture value automatically for the shutter speed you have
selected. Set the shutter speed depending on the type of effect you want. A higher shutter
speed allows you to capture a fast-moving subject without blur, and a slower shutter speed
blurs a moving subject, creating a feeling of speed or motion.
Set the mode dial to
S
and turn the control dial to set the shutter speed.
TIPS
Shutter priority shooting
When the aperture
value (f-number) is
decreased
When the aperture
value (f-number) is
increased
Viewfinder
Aperture value
Shutter speed
AF confirmation
mark
Shooting mode
Open the aperture (f-number is decreased)
Close the aperture (f-number is increased)
A fast shutter
speed can freeze
a fast action
scene without any
blur.
A slow shutter
speed will blur a
fast action scene.
This blurring will
give the
impression of
dynamic motion.
Viewfinder
Aperture value
Shutter speed
AF confirmation
mark
Shooting mode
Slower shutter speed
Faster shutter speed
E-450_MASTER.fm Seite 44 Donnerstag, 16. April 2009 10:40 10
Exposure
4
45
EN
The picture looks blurred:
j
The possibility of camera shake spoiling your picture increases greatly during macro or ultra-
telephoto shooting. Raise the shutter speed or use a monopod or tripod to stabilize the camera.
The aperture value is blinking:
j
The optimum exposure cannot be obtained. For details, see “Exposure warning
display” (
g
P. 118).
Allows you to set the aperture and shutter speed manually. You can check how much it differs
from the appropriate exposure by using the exposure level indicator. This mode gives you more
creative control, allowing you to make whatever settings you like, regardless of the correct
exposure.
Set the mode dial to
M
and turn the control dial to set the value.
Shutter speed: Turn the control dial to set the value.
Aperture value:Turn the control dial while holding down the
F
button
to set the value.
The range of aperture values available varies with the lens type.
The shutter speed can be set to 1/4000–60 sec. or
[BULB]
.
The aperture value and shutter speed change in 1/3EV increments as
the dial is turned.
In
M
mode the exposure level indicator will appear on the super control panel screen. It shows
the difference (ranging from –3EV to +3EV) between the exposure value calculated by the
currently selected aperture and shutter speed and the exposure value considered optimum by
the camera. If the difference exceeds ±3EV,
vw
will appear in red on both sides of the
indicator.
TIPS
Manual shooting
Open the aperture (f-number is decreased)
Slower shutter speed
Close the aperture (f-number is increased)
Faster shutter speed
F
button
Underexposure
Optimum exposure
Overexposure
250 F5.6
-0.3
2008. 08.16
arge
Normal
OFF
M
Exposure level indicator
E-450_MASTER.fm Seite 45 Donnerstag, 16. April 2009 10:40 10
4
Exposure
46
EN
Noise in images
During shooting at slow shutter speeds, noise may appear on-screen. These phenomena are
caused when current is generated in those sections of the image pickup device that are not
normally exposed to light, resulting in a rise in temperature in the image pickup device or image
pickup device drive circuit. This can also occur when shooting with a high ISO setting in a high-
temperature environment. To reduce this noise, the camera activates the noise reduction
function.
g
“Noise reduction” (P. 65)
The picture looks blurred:
j
The use of a monopod or tripod is recommended when taking a picture at slow shutter speed.
To switch the operation between setting the shutter speed and aperture value:
j
You can set the aperture value using only the control dial.
g
“DIAL FUNCTION” (P. 83)
x
Notes
Exposure compensation is not available in
M
mode.
Bulb shooting
You can take a picture with a bulb exposure time in which the shutter stays open as long as you
hold down the shutter button.
Bulb shooting can also be done using an optional remote control (RM-1).
g
“Bulb shooting
with the remote control” (P. 58)
In
M
mode, set the shutter speed to [BULB].
[buLb]
is displayed in the viewfinder and
[BULB]
on the super control panel.
To automatically end bulb shooting after a specified period of time:
j
You can set the maximum time for bulb shooting.
g
“BULB TIMER” (P. 87)
To fix the focus during manual focus shooting:
j
You can fix the focus so the focus does not change even if the focus ring is turned during exposure.
g
“BULB FOCUSING” (P. 83)
x
Notes
The following functions are not available during bulb shooting.
Sequential shooing/self-timer shooting/AE bracket shooting
The viewfinder shows the focused area (depth of field) with the selected aperture value.
For the preview function to work by pressing the
b
button, it is necessary to set the function of
the
b
button on the menu beforehand.
g
7
FUNCTION” (P. 85)
Press the
b
button to use the preview function.
When
[
7
FUNCTION]
is assigned to
[LIVE PREVIEW]
,
pressing the
b
button automatically switches the camera to live
view for a preview of the picture on the monitor.
TIPS
TIPS
Preview function
b
button
E-450_MASTER.fm Seite 46 Donnerstag, 16. April 2009 10:40 10
Exposure
4
47
EN
There are 5 ways to measure the subject brightness: Digital ESP metering, Center weighted
averaging metering, and 3 types of spot metering. Select the most suitable mode for the
shooting conditions.
Setting display
e
Digital ESP metering
The camera measures the light levels and calculates the light
level differences in 49 separate areas of the image. This mode is
recommended for general use. Setting the AF synchronized function to
[ESP+AF]
enables metering
centered around the AF target that is in focus with AF.
J
Center weighted averaging metering
This metering mode provides the average metering between the subject
and the background lighting, placing more weight on the subject at the
center. Use this mode when you do not want the light level of the
background to affect the exposure value.
n
Spot metering
The camera meters a very small area around the center of the subject,
defined by the spot metering area mark in the viewfinder. Use this mode
when there is very strong backlight.
n
HI Spot metering – highlight control
When the overall background is bright, white areas of the image will
come out gray if you use the camera’s automatic exposure. Using this
mode enables the camera to shift to over-exposure, allowing accurate
white reproduction. Metering area is the same as spot metering.
n
SH Spot metering – shadow control
When the overall background is dark, black areas of the image will come out gray if you use the
camera’s automatic exposure. Using this mode enables the camera to shift to under-exposure,
allowing accurate black reproduction. Metering area is the same as spot metering.
Changing the metering mode
Super control panel
ip
: [METERING]
Menu
MENU
[
X
]
[METERING]
arge
Normal
OFF
METERING
i
button
MENU
button
j
Viewfinder
9
: Center weighted averaging metering
:
: Spot metering
: Spot metering – highlight control
: Spot metering – shadow control
: Metering area
E-450_MASTER.fm Seite 47 Donnerstag, 16. April 2009 10:40 10
4
Exposure
48
EN
In some situations, you may get better results if you manually compensate (adjust) the
exposure value set automatically by the camera. In many cases, bright subjects (such as snow)
will turn out darker than their natural colors. Adjusting toward + makes these subjects closer to
their real shades. For the same reason, adjust toward – when shooting dark subjects. The
exposure can be adjusted in a range of ±5.0EV.
The EV step interval is 1/3EV.
The exposure compensation indicator is displayed. The
exposure compensation indicator will not be displayed
when the exposure is compensated by 0.
If the exposure compensation value exceeds the scale of
the exposure compensation indicator, a red
vw
is
displayed on the left and right edges of the indicator.
To adjust the exposure compensation using only the control dial:
j
You can set the exposure compensation value without pressing
F
button.
g
“DIAL FUNCTION” (P. 83)
x
Notes
Exposure compensation is not available in
M
and
Y
modes.
Exposure compensation
Direct button
F
+
j
TIPS
–2.0EV
±0 +2.0EV
Adjust toward –
Adjust toward +
F
button
j
Viewfinder
Exposure compensation value
+2.0
2008. 08.16
arge
Normal
OFF
Exposure compensation indicator
1/3EV
E-450_MASTER.fm Seite 48 Donnerstag, 16. April 2009 10:40 10
Exposure
4
49
EN
The metered exposure value can be locked with the
AEL
/
AFL
button (AE lock). Use AE lock
when you want a different exposure setting from the one that would normally apply under the
current shooting conditions.
Normally, pressing the shutter button halfway locks both AF (auto focus) and AE (automatic
exposure), but you can lock the exposure alone by pressing the
AEL
/
AFL
button.
Press the
AEL
/
AFL
button at the position where you wish
to lock the metering values and the exposure will be locked.
The exposure is locked while the
AEL
/
AFL
button is
pressed. Now press the shutter button.
Releasing the
AEL
/
AFL
button cancels AE lock.
To lock the exposure:
j
You can lock the metering result so that it is not canceled when
the
AEL
/
AFL
button is released.
g
“AEL/AFL MEMO” (P. 85)
To activate AE lock with a set metering mode:
j
You can set the metering mode for locking the exposure with the
AE lock.
g
“AEL Metering” (P. 87)
The camera automatically shoots a number of pictures at different exposure values for each
frame. Even in conditions where correct exposure is difficult to obtain (such as a backlit subject
or a scene at dusk), you can pick the picture you prefer from a selected number of frames with
a variety of different exposure settings. The pictures are taken in the following order: Picture
with optimum exposure, picture adjusted in – direction, and picture adjusted in + direction.
Compensation value: 0.3, 0.7 or 1.0
Number of frames: 3
AE lock
TIPS
AE bracketing
AEL
/
AFL
button
Viewfinder
AE lock
e.g.) When BKT is set to
[3F 1.0EV]
–1.0EV +1.0EV±0
E-450_MASTER.fm Seite 49 Donnerstag, 16. April 2009 10:40 10
4
Exposure
50
EN
Start shooting.
In single-frame shooting, the exposure changes every time
the shutter button is pressed.
In sequential shooting, hold down the shutter button until
the selected number of frames are taken.
Releasing the shutter button stops auto bracketing
shooting. When it stops,
0
is displayed in green on the
super control panel.
How AE bracketing compensates exposure in each shooting mode
Depending on the selected shooting mode, exposure is compensated in the following way:
P
mode : Aperture value and shutter speed
A
mode : Shutter speed
S
mode : Aperture value
M
mode : Shutter speed
To apply AE bracketing to the exposure value you have compensated:
j
Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to
the exposure value you have compensated.
The higher the ISO value, the greater the camera’s light sensitivity and the better its ability to
shoot in low light conditions. However, higher values may give pictures a grainy appearance.
[AUTO]
: The sensitivity is set automatically according
to the shooting conditions. With the
[ISO-
AUTO SET]
setting, you can set the maximum
ISO that is set automatically.
g
“ISO-AUTO SET” (P. 87)
[100–1600]
: Fixed ISO sensitivity.
To automatically set the optimal ISO in
M
mode:
j
Normally, the AUTO setting is not available in
M
mode, but you can set it for use in all shooting
modes.
g
“ISO-AUTO” (P. 87)
Menu
MENU
[
X
]
[AE BKT]
TIPS
ISO sensitivity setting
Super control panel
ip
: [ISO]
Menu
MENU
[
W
]
[ISO]
TIPS
CANCEL
AE BKT
GO
SELECT
AE BKT
3F 0.7EV
3F 0.3EV
3F 1.0EV
OFF
Viewfinder
The exposure
value for the next
shot is displayed
during shooting.
arge
Normal
OFF
ISO
E-450_MASTER.fm Seite 50 Donnerstag, 16. April 2009 10:40 10
Focusing and shooting functions
5
51
EN
5
Focusing and shooting functions
The three focus modes S-AF, C-AF, and MF are available with this camera.
You can take pictures by combining S-AF or C-AF mode with MF mode.
S-AF (single AF)
Focusing is performed once when the shutter button is pressed halfway.
If focusing fails, release your finger from the shutter button and press it halfway again. This
mode is suitable for taking pictures of still subjects or subjects with limited movement.
Press the shutter button halfway.
When the focus is locked, the AF confirmation mark lights up.
A beep sound is output when the subject is in focus.
When it is difficult to focus in the AF mode in low-light conditions:
j
The built-in flash can function as an AF illuminator. This helps with focusing in low-light conditions
in the AF mode.
g
“AF ILLUMINAT.” (P. 83)
AF mode selection
Super control panel
ip
: [AF MODE]
Menu
MENU
[
X
]
[AF MODE]
TIPS
arge
Normal
OFF
AF MODE
i
button
MENU
button
j
AF confirmation
mark
Viewfinder
E-450_MASTER.fm Seite 51 Donnerstag, 16. April 2009 10:40 10
52
EN
5
Focusing and shooting functions
C-AF (continuous AF)
The camera repeats focusing while the shutter button remains pressed halfway. When the
subject is in motion, the camera focuses on the subject in anticipation of its movement
(Predictive AF). Even if the subject moves or you change the composition of the picture, the
camera continues trying to focus.
Press the shutter button halfway and keep it in this position.
When the subject is in focus and locked, the AF confirmation mark lights up.
The AF target does not light up, even when the subject is in focus.
The camera repeats focusing. Even if the subject moves or even if you change the
composition of the picture, focusing is tried continuously.
A beep sound is output when the subject is in focus. The beep sound is not output after the
third continuous AF operation, even when the subject is in focus.
MF (manual focus)
This function allows you to manually focus on any subject.
Adjust the focus using the focus ring.
To change the rotational direction of the focus ring:
j
You can select the rotational direction of the focus ring to suit your preference for how the lens
adjusts to the focusing point.
g
“FOCUS RING” (P. 83)
For information on whether the subject is in focus (Focus aid):
j
When you focus the lens on a subject manually (by turning the focus ring), the AF confirmation
mark lights. When
P
is set with
[AF AREA]
, AF confirmation lights up if the subject is in focus at
the center AF target.
Simultaneous use of S-AF mode and MF mode (S-AF+MF)
This function allows you to fine-adjust the focus manually by turning the focus ring after AF is
performed in the S-AF mode. When the shutter button is not pressed, MF operation is available.
You can fine-adjust the focus with the focus ring if you have pressed the shutter button
halfway and AF is confirmed.
x
Notes
If the shutter button is pressed again after fine-adjusting the focus with the focus ring, the AF is
activated and your adjustments are canceled.
TIPS
)
Near
Focus ring
E-450_MASTER.fm Seite 52 Donnerstag, 16. April 2009 10:40 10
Focusing and shooting functions
5
53
EN
Simultaneous use of C-AF mode and MF mode (C-AF+MF)
Focus with the focus ring and press the shutter button halfway to activate C-AF mode.
While the shutter button is kept pressed, MF cannot be used.
When the shutter button is not pressed, focusing with MF is possible.
Another way to adjust focus manually in C-AF mode:
j
You can set the
AEL
/
AFL
button to operate C-AF.
g
“AEL/AFL” (P. 84)
x
Notes
If the shutter button is pressed again after fine-adjusting the focus with the focus ring, the AF is
activated and your adjustments are canceled.
This camera has 3 AF targets for focusing on the subject with auto focus. You can select only
one of the AF targets.
When
[LIVE VIEW AF MODE]
is set to
[IMAGER AF]
, 11 AF targets will be available during live
view.
g
“Taking a picture using live view” (P. 37)
[AUTO]
or
P
Focuses using the 3 AF targets.
Q
Focuses using the left AF target.
R
Focuses using the center AF target.
S
Focuses using the right AF target.
With the
[IMAGER AF]
setting, target selection is only
possible using the super control panel. Turn the control
dial to select the AF target.
TIPS
AF target selection
Super control panel
ip
: [AF AREA]
Menu
MENU
[
X
]
[AF AREA]
Viewfinder
Center AF target
Left AF target
Right AF target
arge
Normal
OFF
AF AREA
i
button
MENU
button
j
250250 F5.6F5.6
When selecting the AF target with
the
[IMAGER AF]
setting
E-450_MASTER.fm Seite 53 Donnerstag, 16. April 2009 10:40 10
54
EN
5
Focusing and shooting functions
The camera’s auto focus may not be able to focus on the subject in situations such as when the
subject is not in the center of the frame. If this happens, the easiest solution is to use focus
lock. Use this when composing the subject outside of the AF targets or when the subject is
difficult to focus on.
1
Adjust the AF target with the subject to be
focused and press the shutter button
halfway until the AF confirmation mark
lights up.
The focus is locked. The AF confirmation mark
and the AF target in focus light up in the
viewfinder.
If the AF confirmation mark blinks, press the
shutter button halfway again.
While the shutter button is being pressed, the
super control panel disappears.
2
While pressing the shutter button halfway,
move to the desired composition and press
the button all the way.
The card access lamp blinks while the picture is
being stored on the card.
If the subject has lower contrast than its surroundings
If the contrast of the subject is weak, such as when the lighting is insufficient or the subject
cannot be seen clearly because of fog, the focus may not be achieved. Focus (focus lock) on a
high-contrast object the same distance away as the intended subject, recompose your shot and
then take the picture.
Focus lock – If correct focus cannot be obtained
Card access
lamp
Shutter button
e.g.) The camera focuses using the
center AF target.
AF target
AF confirmation
mark
E-450_MASTER.fm Seite 54 Donnerstag, 16. April 2009 10:40 10
Focusing and shooting functions
5
55
EN
Single-frame shooting
o
Shoots 1 frame at a time when the shutter button is pressed
(normal shooting mode).
Sequential shooting
j
Shoots at 3.5 frames/sec. for as long as the shutter button is
pressed (during JPEG).
Press the shutter button fully and keep it pressed. The camera will take pictures in sequence
until you release the button.
Focus, exposure, and white balance are locked at the first frame (during S-AF, MF).
x
Notes
During sequential shooting, if the battery check blinks due to low battery, the camera stops
shooting and starts saving the pictures you have taken on the card. The camera may not save
all of the pictures depending on how much battery power remains.
Setting method
Setting display
Anti-shock display (
g
P. 58):
The
D
symbol displayed next to the icon on the super
control panel indicates that anti-shock is activated.
Sequential shooting
Direct button
<
/
Y
/
jj
Super control panel
ip
: [
j
/
Y
/
<
]
SELECT GO
j
<
/
Y
/
j
button
i
button
:
Single-frame shooting
:
Sequential shooting
Single-frame shooting/
Sequential shooting
Self-timer
:
12-second self-timer
:
2-second self-timer
Remote control
:
0 second
:
2 seconds
E-450_MASTER.fm Seite 55 Donnerstag, 16. April 2009 10:40 10
56
EN
5
Focusing and shooting functions
This function lets you take pictures using the self-timer. You can set the camera to release the
shutter after either 12 or 2 seconds. Fix the camera securely on a tripod for self-timer shooting.
For the setting method, see “Sequential shooting” (
g
P. 55).
Press the shutter button all the way.
When
Y
12s
is selected:
First, the self-timer lamp lights up for
approximately 10 seconds, then it blinks for
approximately 2 seconds and the picture is taken.
When
Y
2s
is selected:
The self-timer lamp blinks for approximately
2 seconds, and then the picture is taken.
To cancel the activated self-timer, press the
<
/
Y
/
j
button.
x
Notes
Do not press the shutter button while standing in front of the camera; this could result in the
subject being out of focus since focusing is performed when the shutter button is pressed
halfway.
Eyepiece cover
When shooting without looking through the viewfinder, attach the eyepiece cover to the
viewfinder to prevent the light entering the viewfinder from changing the exposure. Attach the
eyepiece cover after removing the eyecup as illustrated. The same applies when replacing with
an optional eyecup.
Self-timer shooting
Self-timer lamp
Eyecup
Eyepiece cover
E-450_MASTER.fm Seite 56 Donnerstag, 16. April 2009 10:40 10
Focusing and shooting functions
5
57
EN
By using the optional remote control (RM-1), you can take a picture with yourself in it or a night
scene without touching the camera.
The camera can be set to release the shutter either right away or 2 seconds after the shutter
button on the remote control is pressed. Bulb shooting is also possible when using the optional
remote control.
For the setting method, see “Sequential shooting” (
g
P. 55).
Mount the camera securely on a tripod, point the
remote control at the remote control receiver on the
camera and press the shutter button on the remote
control.
When
<
0s
is selected:
The focus and exposure are locked, the remote
control lamp blinks and the picture is taken.
When
<
2s
is selected:
The focus and exposure are locked, the remote
control lamp blinks, and after approximately
2 seconds the picture is taken.
Transmitted signal effective area
Point the remote control at the remote control receiver of the camera within the effective area
as shown below.
When powerful lighting such as direct sunlight is shining on the remote control receiver, or
when fluorescent light or devices emitting electrical or radio waves are nearby, it could narrow
the effective area.
The remote control lamp does not blink after the shutter button on the remote control is
pressed:
j
The transmitted signal may not be effective if the remote control receiver is exposed to powerful
lighting. Move the remote control closer to the camera and press the shutter button on the remote
control again.
j
The transmitted signal may not be effective if the remote control is too far from the camera. Move
the remote control closer to the camera and press the shutter button on the remote control again.
j
There is signal interference. Point the remote control toward the remote control receiver on the
camera and press and hold down the CH button and the W or T zoom button on the remote control
at the same time for at least three seconds until the remote control lamp on the camera blinks or a
beep sound can be heard, indicating that the signal has been received.
To cancel the remote control shooting mode:
j
The remote control shooting mode will not be canceled after shooting. Press the
<
/
Y
/
j
button to
set to
[
o
]
(single-frame shooting), etc.
To use the shutter button on the camera in the remote control shooting mode:
j
The shutter button on the camera still works even in the remote control shooting mode.
Remote control shooting
TIPS
Remote control lamp
Remote control receiver
Remote control
Remote control receiver
Approx. 5 m (16.4 ft.) (indoor)
Approx. 3 m (9.8 ft.) (outdoor)
A
p
p
r
o
x
.
3
m
(
9
.
8
f
t
.
)
(
i
n
d
o
o
r
)
A
p
p
r
o
x
.
2
m
(
6
.
6
f
t
.
)
(
o
u
t
d
o
o
r
)
A
p
p
r
o
x
.
3
m
(
9
.
8
f
t
.
)
(
i
n
d
o
o
r
)
A
p
p
r
o
x
.
2
m
(
6
.
6
f
t
.
)
(
o
u
t
d
o
o
r
)
E-450_MASTER.fm Seite 57 Donnerstag, 16. April 2009 10:40 10
58
EN
5
Focusing and shooting functions
x
Notes
The shutter will not be released if the subject is not in focus.
Under bright light conditions, the remote control lamp may be difficult to see, making it hard to
determine whether or not the picture has been taken.
Zoom is not available on the remote control.
Bulb shooting with the remote control
Set the mode dial to
M
, then set the shutter speed to
[BULB]
.
g
“Bulb shooting” (P. 46)
You can select the interval from the time the mirror is raised until the shutter is released. This
diminishes camera shake caused by vibrations when the mirror moves. This feature can be
useful in astrophotography and microscope photography or other photographic situations
where a very slow shutter speed is used, and camera vibration needs to be kept to a minimum.
1
MENU
[
X
]
[ANTI-SHOCK
z
]
2
Select the time delay after the mirror is raised and until the shutter is released from
1 to 30 seconds and press the
i
button.
3
Anti-shock is added to the shooting functions individually (single-frame shooting,
sequential shooting, self-timer shooting, and remote control shooting). For the
setting method, see “Sequential shooting” (
g
P. 5 5 ) .
Anti-shock
Press the W button on the remote
control to open the shutter.
When the time set in “BULB
TIMER” (
g
P. 87) elapses, the
shutter closes automatically.
Press the T button to close the
shutter.
E-450_MASTER.fm Seite 58 Donnerstag, 16. April 2009 10:40 10
6
Record mode, white balance, and picture mode
6
59
EN
Record mode, white balance, and picture mode
You can select a record mode in which to take pictures. Choose the record mode that is best for
your purpose (printing, editing on a PC, website editing, etc.).
Recording formats
JPEG
For JPEG images, select a combination of image size (
Y
,
X
,
W
) and compression rate (SF, F,
N, B). An image consists of pixels (dots). When you enlarge an image with a low pixel count, it
will be displayed as a mosaic. If an image has a high pixel count, the file size (amount of data)
will be larger and the number of storable still pictures will be lower. The higher the compression,
the smaller the file size. However, the image will have less clarity when played back.
RAW
This is unprocessed data that has not undergone changes in white balance, sharpness,
contrast or color. To display as an image on the computer, use OLYMPUS Master. RAW data
cannot be displayed on a different camera or by using common software, and it cannot be
selected for print reservation.
It is possible to edit images taken with the record mode set to RAW data using this camera.
g
“Editing still images” (P. 78)
Selecting the record mode
Image becomes clearer
Application
Number of
pixels
Pixel
count
Compression rate
SF (Super
Fine)
1/2.7
F (Fine)
1/4
N (Normal)
1/8
B (Basic)
1/12
Select for the
print size
Y
(Large) 3648 x 2736
Y
SF
Y
F
Y
N
Y
B
X
(Middle)
3200 x 2400
X
SF
X
F
X
N
X
B2560 x 1920
1600 x 1200
W
(Small)
1280 x 960
W
SF
W
F
W
N
W
B
1024 x 768
For
small-sized
prints and use
on a web site
640 x 480
Image with a high pixel count
Image with a low pixel count
Number of pixels increases
E-450_MASTER.fm Seite 59 Donnerstag, 16. April 2009 10:40 10
6
Record mode, white balance, and picture mode
60
EN
Selecting the record mode
JPEG
For JPEG, you can register 4 combinations of images sizes (
Y
,
X
,
W
) and compression rates
(SF, F, N, B) from the 12 total combinations available.
g
K
SET” (P. 88)
When you select the
X
or
W
image size, you can further select the pixel size.
g
“PIXEL COUNT” (P. 88)
RAW+JPEG
Records both a JPEG and RAW image at the same time each time you take a picture.
RAW
Records the image in RAW data format.
e.g.) The following 9 record modes are available when
Y
F/
Y
N/
X
N/
W
N are registered
RAW : RAW
JPEG :
Y
F/
Y
N/
X
N/
W
N
RAW+JPEG : RAW+
Y
F/RAW+
Y
N/RAW+
X
N/RAW+
W
N
To find out the file size/number of storable still pictures
for each record mode:
j
“Record mode and file size/number of storable still
pictures” (
g
P. 121)
Color reproduction differs depending on the light conditions. For instance, when daylight or
tungsten lighting is reflected on white paper, the shade of white produced will be slightly
different for each. With a digital camera, white color can be adjusted to reproduce more natural
white with a digital processor. This is called white balance. There are 4 options for setting the
WB with this camera.
Auto white balance [AUTO]
This function enables the camera to automatically detect white in images and adjust the color
balance accordingly. Use this mode for general use.
Preset white balance [
5
] [
2
] [
3
] [
1
] [
w
] [
x
] [
y
] [
n
]
8 different color temperatures are programmed on this camera covering a variety of indoor and
outdoor lighting including fluorescent lights, light bulbs, and flashes. For example, use preset
WB when you want to reproduce more red in the picture of a sunset, or capture a warmer
artistic effect under artificial lighting.
Super control panel
ip
: [
K
]
Menu
MENU
[
W
]
[
K
]
TIPS
Selecting the white balance
arge
Normal
OFF
CARD SETUP
CUSTOM RESET
PICTURE MODE
GRADATION
WB
CANCEL SELECT
GO
F
N
N
N
RAW
E-450_MASTER.fm Seite 60 Donnerstag, 16. April 2009 10:40 10
Record mode, white balance, and picture mode
6
61
EN
Custom white balance [CWB]
You can set the color temperature from 2000K to 14000K. For details on color temperature,
refer to “White balance color temperature” (
g
P. 120).
g
“Setting the auto/preset/custom white balance” (P. 61)
One-touch white balance [
V
]
You can set the optimum white balance for the shooting conditions by pointing the camera at a
white object like a sheet of white paper. The white balance achieved with this setting is saved
as one of the preset WB settings.
g
“Setting the one-touch white balance” (P. 63)
Setting the auto/preset/custom white balance
You can adjust the white balance by selecting the appropriate color temperature for the light
conditions.
Custom white balance is set by selecting
[CWB]
and
turning the control dial while pressing down the
F
button.
WB mode Light conditions
AUTO
Used for most light conditions (when there is a white portion framed in the
viewfinder). Use this mode for general use.
5
5300K
For shooting outdoors on a clear day, or to capture the reds in a sunset or the
colors in a fireworks display
2
7500K
For shooting outdoors in the shadows on a clear day
3
6000K
For shooting outdoors on a cloudy day
1
3000K
For shooting under a tungsten light
w
4000K
For shooting under white fluorescent lighting
x
4500K
For shooting under a neutral white fluorescent lamp
y
6600K
For shooting under a daylight fluorescent lamp
n
5500K
For flash shooting
V
Color temperature set by one-touch WB.
g
“Setting the one-touch white balance” (P. 63)
CWB
Color temperature set in custom white balance menu. This can be set from 2000K
to 14000K. When the value has not been set, it is set to 5400K.
Super control panel
ip
: [WB]
Menu
MENU
[
W
]
[WB]
i
button
MENU
button
F
button
j
E-450_MASTER.fm Seite 61 Donnerstag, 16. April 2009 10:40 10
6
Record mode, white balance, and picture mode
62
EN
Setting display
When subjects that are not white appear white:
j
In the auto WB setting, if there is no near-white color in the image framed in the screen, the white
balance will not be correctly determined. In such a case, try preset WB or one-touch WB settings.
WB compensation
This function lets you make fine changes to the auto WB and preset WB settings.
Select the white balance to adjust and press
d
.
Adjusting the white balance in the A direction (Amber-
Blue)
Depending on the original WB conditions, the image will
become more amber when adjusted toward +, and bluer
when adjusted toward –.
Adjusting the white balance in the G direction (Green-
Magenta)
Depending on the original WB conditions, the image will
become greener when adjusted toward +, and magenta
when adjusted toward –.
The white balance can be adjusted in 7 increments in each direction.
Checking the white balance you have adjusted:
j
After setting the compensation value, point the camera at the subject to take test shots. When the
AEL
/
AFL
button is pressed, sample images that have been taken with the current WB settings are
displayed.
Adjusting all WB mode settings at once:
j
See “ALL
>
”(
g
P. 8 8 ) .
TIPS
Super control panel
ip
: [
>
]
Menu
MENU
[
W
]
[WB]
TIPS
arge
Normal
OFF
WB
Viewfinder
Not displayed when WB is set to AUTO.
G
5
A
+
2
AUTO
>
GO
CANCEL SELECT
WB PREVIEW
AEL
AFL
E-450_MASTER.fm Seite 62 Donnerstag, 16. April 2009 10:40 10
Record mode, white balance, and picture mode
6
63
EN
Setting the one-touch white balance
This function is useful when you need a more precise white balance than preset WB can
provide. Point the camera at a sheet of white paper under the light source you want to use to
determine the white balance. The optimum white balance for the current shooting conditions
can be saved in the camera. This is useful when shooting a subject under natural light, as well
as under various light sources with different color temperatures.
Set
[
7
FUNCTION]
to
[
V
]
beforehand. (
g
P. 8 5 )
1
Point the camera at a sheet of white paper.
Position the paper so that it fills the viewfinder. Make sure there are no shadows.
2
While holding down the
b
button, press the shutter
button.
The one-touch white balance screen appears.
3
Select [YES] and press the
i
button.
The white balance is registered.
The registered white balance will be stored in the camera as a
preset WB setting. Turning the power off does not erase the
data.
After pressing the shutter button, [WB NG RETRY] is displayed:
j
When there is not enough white in the image, or when the image is too bright, too dark or the colors
look unnatural, you cannot register the white balance. Change the aperture and shutter speed
settings, then repeat the procedure from Step 1.
You can select image tone to create unique image effects. You can also fine-adjust image
parameters such as contrast and sharpness for each mode. The adjusted parameters are
recorded in each picture effect mode.
[
h
VIVID]
: Produces vivid colors.
[
i
NATURAL]
: Produces natural colors.
[
j
MUTED]
: Produces flat tones.
[
Z
PORTRAIT]
: Produces beautiful skin tones.
[MONOTONE]
: Produces black and white tone.
TIPS
Picture mode
Super control panel
ip
: [PICTURE MODE]
Menu
MENU
[
W
]
[PICTURE MODE]
V
b
button
CARD SETUP
CUSTOM RESET
PICTURE MODE
GRADATION
WB
CANCEL SELECT
GO
PICTURE MODE
j
MUTED
i
NATURAL
Z
PORTRAIT
MONOTONE
h
VIVID
E-450_MASTER.fm Seite 63 Donnerstag, 16. April 2009 10:40 10
6
Record mode, white balance, and picture mode
64
EN
The adjustable parameters are classified according to the
picture modes.
The individual parameters are as follows.
[CONTRAST]
: Distinction between light and dark
[SHARPNESS]
: Sharpness of the image
[SATURATION]
: Vividness of the color
[B&W FILTER]
: Creates a black and white image. The
filter color is brightened and the
complementary color is darkened.
[N: NEUTRAL]
: Creates a normal black and white
image.
[Ye: YELLOW]
: Reproduces clearly defined white
cloud with natural blue sky.
[Or: ORANGE]
: Slightly emphasizes colors in blue
skies and sunsets.
[R: RED]
: Strongly emphasizes colors in blue
skies and brightness of crimson
foliage.
[G: GREEN]
: Strongly emphasizes colors in red
lips and green leaves.
[PICT. TONE]
: Colors the black and white image.
[N: NEUTRAL]
: Creates a normal black and white image.
[S: SEPIA]
:Sepia
[B: BLUE]
:Bluish
[P: PURPLE]
: Purplish
[G: GREEN]
: Greenish
In addition to the
[NORMAL]
gradation setting, you can select from 3 other gradation settings.
[HIGH KEY]
: Gradation for a bright subject.
[LOW KEY]
: Gradation for a dark subject.
[AUTO]
: Divides the image into detailed regions and adjusts the brightness
separately for each region. This is effective for images with areas of large
contrast in which the whites appear too bright or the blacks appear too dark.
[NORMAL]
:Use
[NORMAL]
mode for general uses.
x
Notes
Contrast adjustment does not work when set to
[HIGH KEY]
,
[LOW KEY]
, or
[AUTO]
.
Gradation
Super control panel
ip
: [GRADATION]
Menu
MENU
[
W
]
[GRADATION]
CONTRAST
SHARPNESS
SATURATION
i
NATURAL
CANCEL SELECT
GO
Lo Hi
Lo Hi
Lo
Hi
Lo Hi
Lo Hi
Lo
Hi
CONTRAST
SHARPNESS
SATURATION
i
NATURAL
GO
CANCEL SELECT
Lo
00
0
+2
+1
-
1
-
2
Hi
CONTRAST
HIGH KEY
Suitable for a subject that is
mostly highlighted.
LOW KEY
Suitable for a subject that is
mostly shadowed.
E-450_MASTER.fm Seite 64 Donnerstag, 16. April 2009 10:40 10
Record mode, white balance, and picture mode
6
65
EN
This function reduces the noise that is generated during long exposures. When shooting night
scenes, shutter speeds are slower and noise tends to appear in images. With
[NOISE
REDUCT.]
, you can let the camera reduce noise automatically to produce clearer images.
When set to
[AUTO]
, noise reduction will be activated only when the shutter speed is slow.
When set to
[ON]
, noise reduction will always be activated. While noise reduction is activated, it
takes about twice the usual time to take a picture.
The noise-reduction process is activated after shooting.
The card access lamp blinks during the noise-reduction process. You cannot take more
pictures until the card access lamp turns off.
[busy] is displayed on the viewfinder while noise reduction is operating.
x
Notes
When the
Y
mode is set to
X
,
[NOISE REDUCT.]
is fixed to
[ON]
.
During sequential shooting,
[NOISE REDUCT.]
is
[OFF]
automatically.
This function may not work effectively with some shooting conditions or subjects.
You can select the noise processing level. Use
[STANDARD]
for general use.
[HIGH]
is
recommended during high sensitivity shooting.
Noise reduction
Menu
MENU
[
W
]
[NOISE REDUCT.]
Noise filter
Menu
MENU
[
W
]
[NOISE FILTER]
ON/AUTOOFF
E-450_MASTER.fm Seite 65 Donnerstag, 16. April 2009 10:40 10
66
EN
7
Flash shooting
7
Flash shooting
The camera sets the flash mode according to various factors such as firing pattern and flash
timing. Available flash modes depend on the exposure mode. The flash modes are available to
optional external flashes.
Auto flash AUTO
The flash fires automatically in low light or backlight conditions.
To shoot a subject with backlighting, position the AF target over the subject.
Red-eye reduction flash
!
/
H
In the red-eye reduction flash mode, a series of
pre-flashes are emitted just before the regular
flash fires. This helps accustom the subject’s
eyes to the bright light and minimizes the red-eye
phenomenon. In
S
/
M
mode, the flash always
fires.
x
Notes
After the pre-flashes, it takes about 1 second before the shutter is released. Hold the camera
firmly to avoid camera shake.
Effectiveness may be limited if the subject is not looking directly at pre-flashes, or if the shooting
range is too far. Individual physical characteristics may also limit effectiveness.
Slow synchronization (1st curtain)
#
SLOW
The slow synchronization flash is designed for slow shutter speeds. Normally, when shooting
with a flash, shutter speeds cannot go below a certain level to prevent camera shake. But when
shooting a subject against a night scene, fast shutter speeds can make the background too
dark. Slow synchronization allows you to capture both the background and the subject. Since
the shutter speed is slow, be sure to stabilize the camera by using a tripod so as not to cause
the picture to be blurred.
1st curtain
Usually, the flash fires right after the shutter fully opens. This is called 1st curtain. This method
is usually used during flash shooting.
Slow synchronization (2nd curtain)
#
SLOW2/2nd CURTAIN
2nd curtain flash fires just before the shutter closes. Changing the flash timing can create
interesting effects in your picture, such as expressing the movement of a car by showing the
tail-lights streaming backwards. The slower the shutter speed, the better the effects turn out.
In
S
/
M
mode, the flash always fires.
Flash mode setting
The subject’s eyes appear red
E-450_MASTER.fm Seite 66 Donnerstag, 16. April 2009 10:40 10
Flash shooting
7
67
EN
When the shutter speed is set to 2 sec.
Slow synchronization (1st curtain)/Red-eye reduction flash
!
SLOW
While using slow synchronization with flash shooting, you can also use this function to achieve
red-eye reduction. When shooting a subject against a night scene, this function allows you to
reduce the red-eye phenomenon. As the time from emitting pre-flashes to shooting is long in
2nd curtain synchronization, it is difficult to achieve red-eye reduction. Hence, only 1st curtain
synchronization setting is available.
Fill-in flash
#
The flash fires regardless of the light conditions.
This mode is useful for eliminating shadows on the
subject’s face (such as shadows from tree leaves), in
a backlight situation, or for correcting the color shift
produced by artificial lighting (especially fluorescent
light).
x
Notes
When the flash fires, the shutter speed is set to 1/180 sec. or less. When shooting a subject
against a bright background with the fill-in flash, the background may be overexposed. In this
case, use the optional FL-50R external flash or a similar flash and shoot in the Super FP flash
mode.
g
“Super FP flash” (P. 71)
Flash off
$
The flash does not fire.
Even in this mode, the flash can be used as an AF illuminator when it is raised.
g
“AF ILLUMINAT.” (P. 83)
Manual flash
This allows the built-in flash to output a fixed amount of light. To shoot with manual flash, set the
f-number on the lens based on the distance to the subject.
Ratio of amount of light
GN: Guide number
(Equivalent to ISO 100)
FULL (1/1) 12
1/4 6
1/16 3
1/64 1.5
0
seconds
2
seconds
2nd curtain
1st curtain
2nd curtain flash fires
1st curtain flash fires
Shutter closes Shutter fully opens
2 seconds
Calculate the f-number on the lens using the following formula.
Aperture (f-number) =
GN x ISO sensitivity
Distance to the subject (m)
E-450_MASTER.fm Seite 67 Donnerstag, 16. April 2009 10:40 10
7
Flash shooting
68
EN
ISO sensitivity
Setting method
Not all flash modes may be available depending on the
shooting mode. For details refer to “Flash modes that can
be set by shooting mode” (
g
P. 119).
If you shoot a subject using a lens that is wider than 14 mm (equivalent to 28 mm on a 35 mm
film camera), the light emitted by the flash may produce a vignette effect. Whether or not
vignetting occurs also depends on lens type and shooting conditions (such as distance to the
subject).
1
Press the
#
button to raise the built-in
flash.
The built-in flash will pop up automatically
and fire in low light conditions under the
following modes.
AUTO/i/&///B/U/G/J/r/g
ISO value
100 200 400 800 1600
ISO sensitivity
1.01.42.02.84.0
Direct button
#j
Super control panel
ip
: [FLASH MODE]
Built-in flash shooting
FLASH MODE
arge
Normal
OFF
#
button
j
#
button
E-450_MASTER.fm Seite 68 Donnerstag, 16. April 2009 10:40 10
Flash shooting
7
69
EN
2
Press the shutter button halfway.
The
#
(flash stand-by) mark lights when the flash
is ready to fire. If the mark is blinking, the flash is
charging. Wait until charging is complete.
3
Press the shutter button all the way.
When you do not want the flash to pop up automatically:
j
Set
[AUTO POP UP]
to
[OFF]
.
g
“AUTO POP UP” (P. 88)
x
Notes
When
[
#
RC MODE]
is set to
[ON]
, the built-in flash will fire only to communicate with the
external flash so it will not function as a flash.
g
“Shooting with the Olympus wireless RC
flash system” (P. 71)
The flash intensity can be adjusted from +3 to –3.
In some situations (e.g., when shooting small subjects, distant backgrounds, etc.), you may get
better results by adjusting the amount of light emitted by the flash (“flash intensity”). It is useful
when you intend to increase the contrast (distinction between light and dark) of images to make
the images more vivid.
x
Notes
This does not work during manual flash.
This does not work when the flash control mode on the electronic flash is set to MANUAL.
If flash intensity is adjusted on the electronic flash, it will be combined with the camera’s flash
intensity setting.
When
[
w
+
F
]
is set to
[ON]
, the flash intensity value will be added to the exposure
compensation value.
g
w
+
F
” (P. 87)
TIPS
Flash intensity control
Direct button
#
+
Fj
Super control panel
ip
: [
w
]
Menu
MENU
[
X
]
[
w
]
Viewfinder
Flash stand-by mark
S-AF
0.0
OFF
OFF
METERING
RC MODE
AF MODE
AF AREA
ANTI-SHOCK
CANCEL SELECT
GO
00
0
+
3
+
2
+
1
-
1
-
3
-
2
F
button
j
#
button
E-450_MASTER.fm Seite 69 Donnerstag, 16. April 2009 10:40 10
7
Flash shooting
70
EN
In addition to the camera’s built-in flash capabilities, you can use any of the external flash units
specified for use with this camera. This enables you to take advantage of a wider variety of
flash shooting techniques to suit different shooting conditions.
The external flashes communicate with the camera, allowing you to control the camera’s flash
modes with various available flash control modes, such as TTL-AUTO and Super FP flash. An
external flash unit specified for use with this camera can be mounted on the camera by
attaching it to the camera’s hot shoe.
Refer to the external flash’s manual as well.
Functions available with external flash units
*
The focal length of the lens that can be used (Calculated based on 35 mm film camera)
x
Notes
The FL-40 optional flash cannot be used.
Using the external electronic flash
Be sure to attach the flash to the camera before turning on the flash’s power.
1
Remove the hot shoe cover by sliding it in the
direction indicated by the arrow in the
illustration.
Keep the shoe cover in a safe place to avoid losing it.
You can attach the shoe cover to the back of the
eyepiece cover, which is attached to the strap. Put
the shoe cover back on the camera after removing
the external flash.
2
Attach the electronic flash to the hot shoe
on the camera.
If the lock pin is protruding, turn the shoe lock
ring as far as it will go in the direction opposite
to LOCK. This will pull the lock pin back inside.
3
Turn on the flash.
When the charge lamp on the flash lights up, charging is
complete.
The flash will be synchronized with the camera at a speed
of 1/180 sec. or less.
4
Select a flash mode.
5
Select the flash control mode.
TTL-AUTO is recommended for normal use.
6
Press the shutter button halfway.
Shooting information such as ISO sensitivity, aperture
value, and shutter speed is communicated between the
camera and flash.
7
Press the shutter button all the way.
External flash shooting
Optional flash FL-50R FL-50 FL-36R FL-36 FL-20 RF-11 TF-22
Flash control mode
TTL-AUTO, AUTO, MANUAL,
FP TTL AUTO, FP MANUAL
TTL-AUTO,
AUTO, MANUAL
TTL-AUTO,
MANUAL
GN (Guide number)
(ISO100)
GN50 (85 mm
*
)
GN28 (24 mm
*
)
GN36 (85 mm
*
)
GN20 (24 mm
*
)
GN20 (35 mm
*
) GN11 GN22
RC mode
9 k 9 kkkk
Hot shoe cover
Lock pin Lock ring
E-450_MASTER.fm Seite 70 Donnerstag, 16. April 2009 10:40 10
Flash shooting
7
71
EN
x
Notes
The built-in flash cannot be used when an external flash is attached to the hot shoe.
Super FP flash
Super FP flash is available with the FL-50R or FL-36R. Use
the Super FP flash where normal flashes cannot be used
with high shutter speed.
Fill-in flash shooting with the aperture open (such as in
outdoor portrait shooting) is also possible with Super FP
flash. For details, refer to the external flash’s manual.
Wireless flash shooting is possible with the Olympus wireless RC flash system. With this
wireless flash system, you can take pictures using multiple wireless flashes and control the
flashes in three groups (A, B, and C). The built-in flash is used to communicate between the
camera and the external flashes.
For details on using the wireless flash, see the manual of the external flash.
Wireless flash setup range
Position the wireless flash so that the wireless sensor faces the camera. The setup range
guidelines are as shown below. The range changes according to the surrounding environment.
1
Position the flash while referring to the “Wireless flash setup range”, and turn on
the flash.
2
Press the MODE button on the flash to set it to RC mode, and set the channel and
group of the flash.
Shooting with the Olympus wireless RC flash system
2008. 08.16
arge
Normal
OFF
FP
Super FP flash
5m
50
50°
100
100°
50
50°
10m
30
30°
30
30°
60
60°
50°
100°
50°
30°
30°
60°
Direction of
the emitted
flash
Remote sensor
Direction of
the camera
E-450_MASTER.fm Seite 71 Donnerstag, 16. April 2009 10:40 10
7
Flash shooting
72
EN
3
Set RC mode on the camera to [ON].
MENU
[
X
]
[
#
RC MODE]
[ON]
The super control panel switches to RC mode.
You can press the
INFO
button to switch the super control panel display.
4
Use the super control panel to set the flash mode and other settings for each group.
5
Select a flash mode.
Red-eye reduction flash is not possible in RC mode.
6
Press the
#
button to raise the built-in flash.
7
After shooting preparations are completed, take some test shots to check the flash
operation and images.
8
Begin shooting while checking the charging completed indications of the camera
and flash.
x
Notes
Although there is no limit to the number of wireless flashes you can use, it is recommended
that each group have no more than three flashes to prevent flash malfunction due to mutual
interference.
In RC mode, the built-in flash is used to control the wireless flash. The built-in flash cannot be
used for flash shooting in this mode.
For 2nd curtain synchronization, set the shutter speed and anti-shock settings to within
4 seconds. Wireless flash shooting may not operate properly when using a slower shutter
speed or anti-shock setting.
2
LOM
TTL
1 / 8
+1.0
OFF
2008. 08.16
RC
Flash control
mode
Group
Select the flash
control mode and
adjust the flash
intensity individually
for groups A, B, and
C. For MANUAL,
select the flash
intensity.
Flash intensity value
Communication light level
Set the communication light level
to
[HI]
,
[MID]
, or
[LO]
.
Channel
Set the communication channel
to the same channel used on the
flash.
Normal flash/Super FP flash
Switch between normal flash and
Super FP flash.
Flash
intensity
E-450_MASTER.fm Seite 72 Donnerstag, 16. April 2009 10:40 10
Flash shooting
7
73
EN
You cannot use the camera to adjust the amount of light emitted from a commercially available
flash except for a flash specified for use with this camera. To use a commercially available
flash, connect it to the hot shoe. Set the camera’s shooting mode to
M
.
1
Remove the hot shoe cover to connect the flash unit to the camera.
2
Set the shooting mode to
M
, then set the aperture value and shutter speed.
Set the shutter speed to 1/180 sec. or slower. If the shutter speed is faster than this,
commercially available flashes cannot be used.
A slower shutter speed may produce blurred images.
3
Turn on the flash.
Be sure to turn on the flash after attaching the flash unit to the camera.
4
Set the ISO sensitivity and aperture value on the camera to match the flash control
mode on the flash.
Refer to the flash’s manual for instructions on how to set its flash control mode.
x
Notes
The flash fires each time the shutter is released. When you do not need to use the flash, turn off
the flash’s power.
Check beforehand that the flash you are using is synchronized with the camera.
Non-specified commercial flashes
1)
Exposures when using a flash require that adjustments be made on the flash. If a flash is
used in the auto mode, match it with the f-number and ISO sensitivity settings on the
camera.
2)
Even if the flash auto f-number and ISO sensitivity are set the same as on the camera, the
correct exposure may not be obtained depending on the shooting conditions. In such a case,
adjust the auto f-number or ISO on the flash or calculate the distance in the manual mode.
3)
Use a flash with an illumination angle that matches the focal length of the lens. The focal
length of the lens for 35 mm film is approximately twice as long as the focal length of the
lenses designed for this camera.
4)
Do not use a flash unit or other accessory TTL flash that has additional communication
functions other than the specified flashes, since it may not only fail to function normally,
but may also cause damage to the camera’s circuitry.
Using commercially available flashes
E-450_MASTER.fm Seite 73 Donnerstag, 16. April 2009 10:40 10
8
Playback functions
8
74
EN
Playback functions
The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below. You can set the camera to
automatically switch to single-frame playback mode after shooting.
g
“REC VIEW” (P. 90)
1
Press the
q
button (Single-frame playback).
The last recorded image appears.
The LCD monitor turns off after more than 1 minute if
no operations are performed. The camera will turn off
automatically if there is no operation after 4 hours.
Turn on the camera again.
2
Use
p
to select images you want to view. You can also
turn the dial to switch to
U
for close-up playback.
Single-frame/Close-up playback
j
INFO
button
p
q
button
L
N
N
15
15
15
Press
p
to change the
close-up position.
Press
p
to move the
display of the close-up
position.
When
[
g
FACE DETECT]
(
g
P. 39) is set to
[ON]
, a
frame is displayed around a
detected face. Press
i
to
move the frame to another
face.
Press
bd
to view frame-by-
frame close-ups.
When
[
g
FACE DETECT]
is set to
[ON]
, press
ac
to move to another face in
close-up position.
Press the
INFO
button to
return to close-up
playback.
(Single-frame playback) (Close-up playback)
Press the
INFO
button
a
: Displays the frame that is
stored 10 frames back
c
: Displays the frame that is
stored 10 frames ahead
d
: Displays the next frame
b
: Displays the previous frame
(Close-up position playback)
Press the
INFO
button
(Close-up frame-by-frame playback)
To exit the playback mode, press the
q
button again.
Pressing the shutter button halfway
resumes the shooting mode.
E-450_MASTER.fm Seite 74 Donnerstag, 16. April 2009 10:40 10
Playback functions
8
75
EN
This function lets you show several images on the monitor at the same time. This is useful
when you want to quickly search a number of pictures to find a particular image.
During single-frame playback, each time you turn the dial
toward
G
, the number of images shown changes between
4, 9, 16, 25, 49 and 100 pictures.
b
:Moves to the previous frame
d
:Moves to the next frame
a
:Moves to the upper frame
c
:Moves to the lower frame
To return to single-frame playback, turn the control dial to
U
.
Calendar display
With the calendar, you can display images recorded on the card by date. If more than one
image was taken on a single date, the image shot first on that date is displayed.
Use
p
to select a date and press the
i
button to play back images for the selected date in
single-frame display.
Index display/Calendar display
j
(100-frame index
display)
(9-frame index
display)
(4-frame index
display)
(Single-frame
playback)
(Calendar display) (49-frame index
display)
(16-frame index
display)
(25-frame index
display)
E-450_MASTER.fm Seite 75 Donnerstag, 16. April 2009 10:40 10
8
Playback functions
76
EN
This allows you to display detailed information about the image.
Luminance information can also be displayed with histogram and
highlight graphs.
Press the
INFO
button repeatedly until the desired
information is displayed.
This setting is stored and will be shown the next time the
information display is called up.
Information display
INFO
button
x
10
x
10
100 -001 5100-0015 1 515
L
NN
x
10
x
10
L
NN
x
10
x
10
L
NN
[36 48x2 736 ,1/8 ][3648x2736,1/8]
x
10
x
10
08 .12. 16’08.1 2.16 2 1:5621:56
100 -001 5100-0015 1 515
L
NN
1/2 50 F 5.6250 F5.6
+2. 0 45 mm+2.0 45mm
ISO 100ISO 100
0.00.0
A: 0A: 0
WB : AUTOWB : AUTO
G: 0G: 0
NATURALNATURAL
sRG BsR GB
L
NN
SHADOW
HILIGHT
Shadow/Highlight display
Image only Information 1 Information 2
Shadow/Highlight display Histogram display
Histogram
*
Shooting
information
Displays the frame
number, print reservation,
protect, record mode and
file number
Displays the frame number,
print reservation, protect,
record mode, number of pixels,
compression rate, date and
time and file number
Distribution of the brightness of the
recorded image is displayed in a
histogram (brightness component
graph).
Under- or overexposed parts of the recorded image are
displayed.
Shadows (underexposed) parts will be shown in blue.
Highlights (overexposed) parts will be shown in red.
*Histogram
If the bars in the histogram are higher on the
right, the image may be too bright. If the bars
are higher on the left, the image may be too
dark. Compensate the exposure or shoot again.
Overall
information
E-450_MASTER.fm Seite 76 Donnerstag, 16. April 2009 10:40 10
Playback functions
8
77
EN
This function displays images stored on the card one after another. Images are displayed one
by one for about 5 seconds starting from the currently displayed image. Slideshow can be
performed using index display. You can select the number of frames displayed during slideshow
from 1, 4, 9, 16, 25, 49 or 100.
1
MENU
[
q
]
[
m
]
2
Use
p
to set.
[
K
]
(1-frame display)/
[
L
]
(4-frame display)/
[
M
]
(9-frame display)/
[
N
]
(16-frame display)/
[
O
]
(25-frame display)/
[
h
]
(49-frame display)/
[
i
]
(100-frame display)
3
Press the
i
button to start the slideshow.
4
Press the
i
button to stop the slideshow.
x
Notes
If the slideshow is left running for about 30 minutes, the camera will turn off automatically.
This function lets you rotate images and display them vertically on the monitor during single-
frame playback. This is useful when taking pictures with the camera held vertically. The images
will automatically be displayed in the correct direction even if the camera is rotated.
1
MENU
[
q
]
[
y
]
When set to
[ON]
, images shot vertically will be automatically
rotated and displayed during playback. You can also press the
F
button to rotate and display the image.
The rotated image will be recorded on the card in that position.
Slideshow
Rotating images
When selecting
[
L
]
F
button
L
N
N
L
N
N
L
N
N
L
N
N
Original image before
rotating
FFF
F
E-450_MASTER.fm Seite 77 Donnerstag, 16. April 2009 10:40 10
8
Playback functions
78
EN
Use the video cable provided with the camera to play back recorded images on your TV.
1
Turn the camera and TV off, and connect
the video cable as illustrated.
2
Turn on the TV and set it to the video
input mode. For details on switching to
the video input mode, refer to the TV’s
manual.
3
Turn the camera on and press the
q
(playback) button.
x
Notes
To connect the camera to a TV, use the provided video cable.
Make sure that the camera’s video output signal type is the same as the TV’s video signal type.
g
“VIDEO OUT” (P. 90)
The camera’s monitor turns off automatically when the video cable is connected to the camera.
The image may appear off-center depending on the TV screen.
Recorded images can be edited and saved as new images. Available editing functions depend
on the image format (image record mode).
A JPEG file can be printed as is without modification. A RAW file, on the other hand cannot be
printed as is. To print a RAW file, use the RAW edit function to convert the RAW data format to
JPEG.
Editing images recorded in RAW data format
The camera performs image processing (such as white balance and sharpness adjustment) on
images in the RAW data format, then saves the data to a new file in the JPEG format. While
checking recorded images, you can edit them to your liking.
Image processing is performed based on the current camera settings. Change the
camera settings to suit your preferences before editing.
Playback on TV
Editing still images
q
button
Video input terminal
Video cable
Multi-connector
E-450_MASTER.fm Seite 78 Donnerstag, 16. April 2009 10:40 10
Playback functions
8
79
EN
Editing images recorded in JPEG data format
[SHADOW ADJ]
Brightens a dark backlit subject.
[REDEYE FIX]
Reduces the red-eye phenomenon during flash shooting.
[
P
]
Set the trimming size with the control
dial and the trimming position with the
arrow pad.
[BLACK & WHITE]
Creates black and white images.
[SEPIA]
Creates sepia-toned images.
[SATURATION]
Sets the color depth. Adjust the color saturation checking the picture on
the screen.
[
Q
]
Converts the image file size to 1280 x 960, 640 x 480 or 320 x 240.
1
MENU
[
q
]
[EDIT]
2
Use
bd
to select an image, then press the
i
button.
The camera recognizes the image data format.
For images recorded in RAW+JPEG, a selection screen
will appear, asking you which data to edit.
3
The setting screen varies with the image data
format. Select the item you want to edit and do the
following steps.
The edited image is saved as another image, apart from the original image.
To exit the edit mode, press the
MENU
button.
x
Notes
Red-eye correction may not work depending on the image. Red-eye correction may affect other
parts of the image, as well as the eyes.
Editing of a JPEG image is not possible in the following cases:
When an image is recorded in RAW, when an image is processed on a PC, when there is not
enough space in the card memory, when an image is recorded on another camera.
When resizing (
[
Q
]
) an image, you cannot select a larger number of pixels than was originally
recorded.
GOGOGO
CANCEL SELECT GO
Confirm the data format from here.
JPEG EDIT
CANCEL SELECT
GO
SHADOW ADJ
REDEYE FIX
BLACK & WHITE
SEPIA
RAW DATA EDIT
YES
NO
CANCEL SELECT
GO
E-450_MASTER.fm Seite 79 Donnerstag, 16. April 2009 10:40 10
8
Playback functions
80
EN
This function lets you copy images to and from the xD-Picture Card and CompactFlash or
Microdrive. This menu can be selected if both cards are inserted. The selected card is the
copying source.
g
“CF/xD” (P. 90)
Single-frame copy
1
Play back the image you want to copy and press the
COPY
/
<
button.
2
Use
ac
to select [YES], then press the
i
button.
Copying selected frames
This function lets you select multiple images and copy them all at the same time during single-
frame playback or index display.
1
Display the images you want to copy and press the
i
button.
The selected images will be shown with red frames.
To cancel your selection, press the
i
button again.
2
Press
p
to display the next images you want to
copy and press the
i
button.
3
After you have selected the images to copy, press
the
COPY
/
<
button.
4
Use
ac
to select [YES], then press the
i
button.
Copying all the frames
1
MENU
[
q
]
[COPY ALL]
2
Press
d
.
3
Use
ac
to select [YES], then press the
i
button.
Copying images
COPY/
<
button
COPY SELECT
YES
NO
CANCEL SELECT
GO
YES
NO
COPY ALL
CANCEL SELECT
GO
E-450_MASTER.fm Seite 80 Donnerstag, 16. April 2009 10:40 10
Playback functions
8
81
EN
Protect images you do not want to erase. Protected images cannot be erased by the single-
frame or all-frame erase function.
Single-frame protect
Play back the image you want to protect and press the
0
button.
9
(protect mark) is displayed on the top right corner of the
screen.
To cancel the protection
Display the images that are protected and press the
0
button.
Protecting selected frames
This function lets you select multiple images and protect them all at the same time during
single-frame playback or index display.
1
Display the images you want to protect and press the
i
button.
The selected images will be shown with red frames.
To cancel your selection, press the
i
button again.
During index display, press
p
to select the images you want to protect and press the
i
button.
2
Press
p
to display the next images you want to protect and press the
i
button.
3
After you have selected the images to protect, press the
0
button.
Canceling all protections
This function lets you cancel the protection of several images at one time.
1
MENU
[
q
]
[RESET PROTECT]
2
Use
ac
to select [YES], then press the
i
button.
x
Notes
Formatting the card erases all images even if they have been protected.
g
“Formatting the card” (P. 114)
Protected images cannot be rotated even when the
F
button is pressed.
Protecting images
i
button
0
button
E-450_MASTER.fm Seite 81 Donnerstag, 16. April 2009 10:40 10
8
Playback functions
82
EN
Lets you erase recorded images. You can select single-frame erase, which erases only the
currently displayed image; all-frame erase, which erases all the images stored on the card; or
selected frame erase, which erases only the frames selected.
x
Notes
When you perform all-frame or selected frame erase on images recorded using RAW+JPEG,
both the RAW and JPEG images are erased. When using single-frame erase, you can select
whether to erase the JPEG, RAW, or both RAW and JPEG images.
g
“RAW+JPEG ERASE” (P. 89)
Protected images cannot be erased. Cancel protected images, then erase them.
Once erased, images cannot be restored.
g
“Protecting images” (P. 81)
Single-frame erase
1
Play back the image you want to erase and press the
S
button.
2
Use
ac
to select [YES], then press the
i
button.
Erasing selected frames
This function lets you erase selected images at one time during single-frame playback or index
display.
1
Display the images you want to erase and press the
i
button.
The selected images will be shown with red frames.
To cancel your selection, press the
i
button again.
During index display, press
p
to select the images you want to erase and press the
i
button.
2
Press
p
to display the next images you want to erase and press the
i
button.
3
After you have selected the images to erase, press the
S
button.
4
Use
ac
to select [YES], then press the
i
button.
All-frame erase
1
MENU
[
W
]
[CARD SETUP]
2
Use
ac
to select [ALL ERASE], then press the
i
button.
3
Use
ac
to select [YES], then press the
i
button.
All frames will be erased.
Erasing images
S
button
E-450_MASTER.fm Seite 82 Donnerstag, 16. April 2009 10:40 10
9
Customizing your camera
9
83
EN
Customizing your camera
Use the custom menus to customize the camera for ease of use. Use Custom Menu 1 to
customize the shooting functions and Custom Menu 2 to set the basic camera functions.
Custom Menu 1 has 8 tabs (
a
to
h
) that are divided according to the functions to be set.
For details on using the menu lists, see “Using the menu” (
g
P. 29).
Custom Menu 1
a
AF/MF
AF ILLUMINAT.
The built-in flash can function as an AF illuminator. This helps with focusing in low-light
conditions in the AF mode. To use this function, raise the flash.
FOCUS RING
You can customize how the lens adjusts to the focal point
by selecting the rotational direction of the focus ring.
RESET LENS
When set to
[ON]
, this resets the focus of the lens (infinity) each time the power is turned off.
BULB FOCUSING
You can set the camera to enable focus adjustments during bulb shooting with MF.
[ON]
During exposure, you can turn the focus ring and adjust the focus.
[OFF]
The focus is locked during exposure.
Custom Menu 1
b
BUTTON/DIAL
DIAL FUNCTION
You can also switch the operation of the control dial to the opposite of factory default settings.
For example, after setting
[P]
to
[
F
]
, in
P
mode you can adjust the exposure compensation
using the control dial and set the program shift using the control dial while holding down the
F
button.
AF/MF
BUTTON/DIAL
DISP/
8
/PC
EXP/
e
/ISO
#
CUSTOM
CANCEL SELECT
GO
K
/COLOR/WB
A
B
C
D
E
F
CANCEL SELECT
GO
DIAL FUNCTION
DIAL DIRECTION
OFF
AEL/AFL
AEL/AFL MEMO
FUNCTION
FUNCTION
S1/C2/M1
A
B
C
D
E
F
DIAL FUNCTION
CANCEL SELECT
GO
DIAL DIRECTION
AEL/AFL
OFF
AEL/AFL MEMO
FUNCTION
FUNCTION
S1/C2/M1
AEL/AFL
C-AF
MF
S-AF
Use
ac
to select
[
Y
]
, then
press
d
.
Use
ac
to select tab
a
to
h
,
then press
d
.
Use
ac
to select a function,
then press
d
.
Near
Near
)
)
E-450_MASTER.fm Seite 83 Donnerstag, 16. April 2009 10:40 10
84
EN
9
Customizing your camera
DIAL DIRECTION
You can select the rotational direction of the control dial and the direction in which the shutter
speed/aperture value will increase or decrease.
AEL/AFL
You can use the
AEL
/
AFL
button to perform AF or metering operations instead of using the
shutter button.
Select the function of the button to match the operation when the shutter button is pressed.
Select
[mode1]
to
[mode4]
in each focus mode. (You can only select
[mode4]
in C-AF mode.)
Mode Setting
j F
button +
j
P
%
(program shift) Program shift Exposure compensation
F
Exposure compensation Program shift
A
FNo. Aperture value Exposure compensation
F
Exposure compensation Aperture value
S
SHUTTER Shutter speed Exposure compensation
F
Exposure compensation Shutter speed
M
SHUTTER Shutter speed Aperture value
FNo. Aperture value Shutter speed
Setting
q
(rotational direction of the dial)
r
(rotational direction of the dial)
DIAL1
Slower shutter speed
Open the aperture (f-number is decreased)
Faster shutter speed
Close the aperture (f-number is increased)
DIAL2
Faster shutter speed
Close the aperture (f-number is increased)
Slower shutter speed
Open the aperture (f-number is decreased)
Mode
Shutter button function
AEL/AFL
button function
Half-press Full press When holding down AEL/AFL
Focus Exposure Focus Exposure Focus Exposure
[S-AF]
mode1
S-AF Locked
kk k
Locked
mode2
S-AF
kk
Locked
k
Locked
mode3
k
Locked
kk
S-AF
k
[C-AF]
mode1
C-AF start Locked Locked
kk
Locked
mode2
C-AF start
k
Locked Locked
k
Locked
mode3
k
Locked Locked
k
C-AF start
k
mode4
kk
Locked Locked C-AF start
k
[MF]
mode1
k
Locked
kk k
Locked
mode2
kkk
Locked
k
Locked
mode3
k
Locked
kk
S-AF
k
E-450_MASTER.fm Seite 84 Donnerstag, 16. April 2009 10:40 10
Customizing your camera
9
85
EN
Basic operations
[mode1]
For determining the metered exposure while focusing. AE lock is activated while
pressing the
AEL
/
AFL
button, allowing you to adjust the focus and determine the
exposure separately.
[mode2]
For determining the exposure when you press the shutter button fully. This is
useful for shooting scenes with significant changes in lighting, such as on a stage.
[mode3]
For focusing with the
AEL
/
AFL
button instead of the shutter button.
[mode4]
Press the
AEL
/
AFL
button to focus, and press the shutter button fully to
determine the exposure.
AEL/AFL MEMO
You can lock and maintain the exposure by pressing the
AEL
/
AFL
button.
[ON]
Press the
AEL
/
AFL
button to lock and maintain the exposure. Press again to
cancel the maintaining of the exposure.
[OFF]
The exposure will be locked only while the
AEL
/
AFL
button is pressed.
7
FUNCTION
You can assign a function to the
b
button (
<
button).
[Fn FACE DETECT]
Press the
b
button to set
[
g
FACE DETECT]
to
[ON]
and activate the optimal settings.
g
“Using the face detection function” (P. 39), “
g
FACE DETECT” (P. 87)
[PREVIEW]/[LIVE PREVIEW] (electronic)
While holding down the
b
button, you can use the preview function.
g
“Preview function” (P. 46)
[
V
]
Press the
b
button to acquire the WB value.
g
“Setting the one-touch white
balance” (P. 63)
[TEST PICTURE]
Pressing the shutter button while pressing the
b
button enables you to check the
picture you have just taken on the monitor without having to record the picture to the
card. This is useful when you want to see how a picture turned out without saving it.
[OFF]
Does not allow function allocation.
j
FUNCTION
Other functions can be assigned to the
<
/
Y
/
j
button.
[
j
/
<
/
Y
]
g
“Sequential shooting” (P. 55), “Self-timer shooting” (P. 56), “Remote control
shooting” (P. 57)
[AF AREA]
g
“AF target selection” (P. 53)
[AF MODE]
g
“AF mode selection” (P. 51)
[WB]
g
“Selecting the white balance” (P. 60)
[METERING]
g
“Changing the metering mode” (P. 47)
[ISO]
g
“ISO sensitivity setting” (P. 50)
E-450_MASTER.fm Seite 85 Donnerstag, 16. April 2009 10:40 10
86
EN
9
Customizing your camera
Custom Menu 1
c
DISP/
8
/PC
8
You can turn off the beep sound that is emitted when the focus locks by pressing the shutter
button.
SLEEP
After a specified period of time elapses with no operations being performed, the camera enters
the sleep mode (stand-by) to save battery power. After the super control panel is displayed for a
specified period of time, the backlight turns off. After a specific period of time has further passed,
the camera enters sleep mode.
[SLEEP]
lets you select sleep timer from
[1 MIN]
,
[3 MIN]
,
[5 MIN]
, or
[10 MIN]
.
[OFF]
cancels the sleep mode.
The camera activates again as soon as you touch any button (the shutter button,
q
button,
etc.).
BACKLIT LCD (Backlight timer)
To save battery power, after the super control panel is displayed for a specified period of time,
the monitor backlight turns off and the monitor darkens. Select from
[8SEC]
,
[30SEC]
, or
[1 MIN]
for the time until the backlight turns off.
[HOLD]
sets the backlight to stay on.
The monitor backlight turns on again as soon as you touch any button (the shutter button, arrow
pad, etc.).
USB MODE
You can connect the camera directly to a computer or printer with the provided USB cable. If
you specify the device you are connecting to beforehand, you can skip the USB connection
setting procedure normally required every time you connect the cable to the camera.
For details on how to connect the camera to either device, refer to “Connecting the camera to
a printer” (
g
P. 94) and “Connecting the camera to a computer” (
g
P. 9 8 ) .
[AUTO]
The selection screen for the USB connection will be displayed every time you connect
the cable to a computer or printer.
[STORAGE]
Allows you to transfer images to a computer. Also, select to use the OLYMPUS Master
software via PC connection.
[MTP]
Allows you to transfer images to a computer running Windows Vista without using the
OLYMPUS Master software.
[CONTROL]
Allows you to control the camera from a PC using the optional OLYMPUS Studio.
[
<
EASY]
Can be set when connecting the camera to a PictBridge-compatible printer. Pictures
can be printed directly without using a PC.
g
“Connecting the camera to a
printer” (P. 94)
[
<
CUSTOM]
Can be set when connecting the camera to a PictBridge-compatible printer. You can
print out pictures with set number of prints, print paper and other settings.
g
“Connecting the camera to a printer” (P. 94)
E-450_MASTER.fm Seite 86 Donnerstag, 16. April 2009 10:40 10
Customizing your camera
9
87
EN
LIVE VIEW BOOST
During live view shooting, you can brighten the monitor for easier confirmation on the subject.
[OFF]
The subject is displayed on the monitor with the brightness level that is adjusted
according to the exposure being set. You can shoot while confirming through the
monitor in advance to get a picture that is to your liking.
[ON]
The camera automatically adjusts the brightness level and displays the subject on the
monitor for easier confirmation. The effect of the exposure compensation adjustments
will not be reflected on the monitor.
g
FACE DETECT
When set to
[ON]
, the camera will detect people’s faces and automatically adjust the focus there.
g
“Using the face detection function” (P. 39)
You can play back close-up images focusing on the subject’s face.
g
“Single-frame/Close-up
playback” (P. 74)
FRAME ASSIST (Ruled lines display)
During live view, you can display the ruled lines on the LCD monitor as a guide when confirming
the composition. Press the
INFO
button repeatedly to display the ruled lines.
g
“Switching
the information display” (P. 40)
Custom Menu 1
d
EXP/
e
/ISO
ISO-AUTO SET
You can set the upper limit when ISO is set to
[AUTO].
This sets the upper limit of the ISO value that automatically changes. The upper limit can be set
from 100 to 1600.
ISO-AUTO
You can set the shooting mode in which the ISO
[AUTO]
setting is activated.
[
P
/
A
/
S
]
The
[AUTO]
setting is activated in all shooting modes except
M
mode. When
[AUTO]
is
selected in
M
mode, ISO 100 is set.
[ALL]
The
[AUTO]
setting is activated for all shooting modes. The ISO is automatically
selected to obtain the optimal ISO even in
M
mode.
AEL Metering
You can set the metering mode when pressing the
AEL
/
AFL
button to lock the exposure.
[AUTO]
performs metering in the mode selected under
[METERING]
.
BULB TIMER
You can select the maximum time (in minutes) for bulb shooting.
Custom Menu 1
e
#
CUSTOM
w
+
F
When set to
[ON]
, it will be added to the exposure compensation value and flash intensity
control will be performed.
E-450_MASTER.fm Seite 87 Donnerstag, 16. April 2009 10:40 10
88
EN
9
Customizing your camera
AUTO POP UP
In
AUTO
or scene mode, the built-in flash pops up automatically in low light or backlight
conditions. When set to
[OFF]
, the built-in flash will not pop up automatically.
Custom Menu 1
f
K
/COLOR/WB
ALL
>
You can apply the same compensation value to all the white balance modes at once.
[ALL SET]
The same compensation value applies to all WB modes.
[ALL RESET]
The WB compensation value settings applied to each WB mode are all
cleared at once.
If you select [ALL SET]
1)
Use
bd
to select the color direction.
Toward A: Amber-Blue/Toward G: Green-Magenta
2)
Use
ac
to set the compensation value.
g
“WB compensation” (P. 62)
Releasing the
AEL
/
AFL
button takes a sample image. You can check the white balance you
have adjusted.
If you select [ALL RESET]
1)
Use
ac
to select
[YES]
.
COLOR SPACE
You can select how colors are reproduced on the monitor or printer. The first character in image
file names indicates the current color space.
g
“FILE NAME” (P. 89)
K
SET
You can combine 3 image sizes and 4 compression rates
and register 4 combinations. Select the registered setting
with
[
K
]
.
g
“Selecting the record mode” (P. 59)
PIXEL COUNT
You can set the pixel size for the image size
[
X
]
,
[
W
]
.
[
X
iddle]
Select
[3200 x 2400]
,
[2560x1920]
, or
[1600 x 1200]
.
[
W
mall]
Select
[1280 x 960]
,
[1024 x 768]
, or
[640 x 480]
.
[sRGB]
Standardized color space for Windows.
[Adobe RGB]
Color space that can be set with Adobe Photoshop.
Register 4 different combinations
of image settings.
Set the compression rate.
D
SET
CANCEL SELECT
GO
PIXEL COUNT
Y
Y
arge
SFF NSF
XW
W
1 2 34
Set the number
of pixels.
E-450_MASTER.fm Seite 88 Donnerstag, 16. April 2009 10:40 10
Customizing your camera
9
89
EN
Custom Menu 1
g
RECORD/ERASE
RAW+JPEG ERASE
You can select the method to erase images recorded in RAW+JPEG. This function can only be
used to erase one frame.
[JPEG]
Erases all JPEG image files, leaving only the RAW image files.
[RAW]
Erases all RAW image files, leaving only the JPEG image files.
[RAW+JPEG]
Erases both image file types.
x
Notes
This function is effective only if deleting one frame. For all-frame erase or erasing selected
frames, both RAW and JPEG will be erased regardless of this setting.
FILE NAME
When you take a picture, the camera assigns it a unique file name and saves it in a folder.
File names are assigned as shown in the illustration below.
[AUTO]
Even when a new card is inserted, the folder numbers are retained from the previous
card. If the new card contains an image file whose file number coincides with one saved
on the previous card, the new card’s file numbers start at the number following the
highest number on the previous card.
[RESET]
When a new card is inserted, folder numbers start at 100 and file numbers start at 0001.
If a card containing images is inserted, the file numbers start at the number following the
highest file number on the card.
When both the Folder and File No. reach their respective maximum number (999/9999), it is not
possible to store additional pictures even if the card is not full. No more pictures can be taken.
Replace the card with a new one.
dpi SETTING
You can set the resolution for printing images in advance. The set value is recorded on the card
with the images.
[AUTO]
Automatically set according to the image size.
[CUSTOM]
You can make the desired setting. Press
d
to display the setting screen.
All folders
Folder name
000 OLYMP
Folder number (100–999)
Pmdd0000.jpg
File name
Day
(01–31)
Month
(10, 11, 12 are
numbered A, B, C)
Color space
P: sRGB
_: Adobe RGB
File number
(0001–9999)
After taking 9999 pictures, the counter is reset to 0001 for the
next picture, the folder number increments by 1 to name and
create a new folder where the next image (file) is stored.
E-450_MASTER.fm Seite 89 Donnerstag, 16. April 2009 10:40 10
90
EN
9
Customizing your camera
Custom Menu 2
CF/xD
You can select which card to use when both a CompactFlash and xD-Picture Card are loaded.
s
(Monitor brightness adjustment)
You can adjust the brightness and color temperature of the
monitor. Color temperature adjustment will affect only the
LCD monitor display during playback.
Use
bd
to switch between
k
(brightness) and
j
(color
temperature), and use
ac
to adjust the value between
[+7]
[–7]
.
W
(Changing the display language)
You can change the language used for the on-screen display and error messages from
ENGLISH to another language.
You can add another language to your camera with the provided OLYMPUS Master software.
For details, refer to Help in OLYMPUS Master software.
g
“Using the OLYMPUS Master
software” (P. 97)
VIDEO OUT
You can select NTSC or PAL according to your TV’s video signal type.
You will need to set this when you want to connect the camera to a TV and play back images in
a foreign country. Make sure the correct video signal type is selected before connecting the
video cable. If you use the wrong video signal type, recorded pictures will not play back
properly on your TV.
TV video signal types in major countries and regions
Check the video signal type before connecting the camera to your TV.
REC VIEW
You can display the picture you have just taken on the monitor while it is being recorded to the
card, and to select how long the picture is displayed. This is useful for making a brief check of
the picture you have just taken. Pressing the shutter button halfway while checking the picture
lets you resume shooting immediately.
[1SEC] – [20SEC]
Selects the number of seconds to display each picture. Can be set in
units of 1 second.
[OFF]
The picture being recorded to the card is not displayed.
[AUTO
q
]
Displays the image being recorded, and then switches to playback
mode. This is useful for erasing a picture after checking it.
FIRMWARE
Your product’s firmware version will be displayed.
When you make inquiries about your camera or accessories or when you want to download
software, you will need to state which version of each of the products you are using.
Press
d
. Your product’s firmware version will be displayed. Press the
i
button to return to the
previous screen.
NTSC North America, Japan, Taiwan, Korea
PAL European countries, China
5
+
2
CANCEL SELECT
GO
E-450_MASTER.fm Seite 90 Donnerstag, 16. April 2009 10:40 10
10
Printing
10
91
EN
Printing
Print reservation
Print reservation allows you to save printing data (the number of prints and the date/time
information) with the pictures stored on the card.
Pictures set with print reservation can be printed using the following methods.
Printing using a DPOF-compatible photo lab
You can print the pictures using the print reservation data.
Printing using a DPOF-compatible printer
Pictures can be printed directly from a dedicated printer without using a PC. For more details,
refer to the printer’s manual. A PC card adapter may also be necessary.
x
Notes
DPOF reservations set by another device cannot be changed by this camera. Make changes
using the original device. Moreover, setting new DPOF reservations using this camera will erase
the previous reservations set by another device.
Not all functions may be available on all printers or at all photo labs.
RAW data are not printable.
Single-frame reservation
Follow the operation guide to set print reservation for a picture.
1
MENU
[
q
]
[
<
]
2
Select [
<
] and press the
i
button.
3
Press
bd
to select the frame that you want to set
as print reservation, then press
ca
to set the
number of prints.
To set print reservation for several pictures, repeat this
step.
4
Press the
i
button when you have finished.
The menu screen for single-frame reservation appears.
Print reservation (DPOF)
ON
EDIT
COPY ALL
RESET PROTECT
CANCEL SELECT
GO
Operation guide
CANCEL SELECT
GO
PRINT ORDER SETTING
CANCEL SELECT
GO
E-450_MASTER.fm Seite 91 Donnerstag, 16. April 2009 10:40 10
92
EN
Printing
10
5
Select the date and time format and press the
i
button.
[NO]
The pictures are printed without the date and time.
[DATE]
The pictures are printed with the shooting date.
[TIME]
The pictures are printed with the shooting time.
6
Select [SET] and press the
i
button.
All-frame reservation
Applies print reservation to all the pictures stored in the card. The number of prints is fixed at 1.
1
MENU
[
q
]
[
<
]
2
Select [
U
] and press the
i
button.
3
Select the date and time format and press the
i
button.
[NO]
The pictures are printed without the date and time.
[DATE]
The pictures are printed with the shooting date.
[TIME]
The pictures are printed with the shooting time.
4
Select [SET] and press the
i
button.
Resetting the print reservation data
You can reset all print reservation data or just the data for selected pictures.
1
MENU
[
q
]
[
<
]
Resetting the print reservation data for all pictures
2
Select [
<
] or [
U
] and press the
i
button.
3
Select [RESET] and press the
i
button.
NO
DATE
TIME
CANCEL SELECT
GO
SET
CANCEL
CANCEL SELECT
GO
PRINT ORDER SETTING
RESET
KEEP
PRINT ORDERED
PRINT ORDER SETTING
CANCEL SELECT
GO
E-450_MASTER.fm Seite 92 Donnerstag, 16. April 2009 10:40 10
93
EN
Printing
10
Resetting the print reservation data for a selected picture
2
Select [
<
] and press the
i
button.
3
Select [KEEP] and press the
i
button.
4
Use
bd
to select the frame with print reservation data you want to reset, then press
c
to set the number of prints to 0.
5
Press the
i
button when you have finished.
6
Select the date and time format and press the
i
button.
This setting is applied to all frames with print reservation data.
7
Select [SET] and press the
i
button.
By connecting the camera to a PictBridge-compatible printer with the USB cable, you can print
out recorded pictures directly. To find out if your printer is compatible with PictBridge, refer to
the printer’s manual.
PictBridge
The standard that enables digital cameras and printers made by different manufacturers to be
connected, and also allows pictures to be printed directly from the camera.
STANDARD
All printers that support PictBridge have standard print settings. By selecting
[STANDARD]
on
the settings screens (
g
P. 95), you can print pictures according to these settings. For details
on your printer’s standard settings, refer to the printer’s manual or contact the printer
manufacturer.
x
Notes
Use a fully charged battery for printing.
Images recorded in RAW data cannot be printed.
The camera will not enter sleep mode while it is connected to the USB cable.
Direct printing (PictBridge)
The available print modes and settings such as paper size vary with the type of printer.
For details, refer to the printer’s manual.
For details on printing paper types, ink cassettes, etc., refer to the printer’s manual.
E-450_MASTER.fm Seite 93 Donnerstag, 16. April 2009 10:40 10
94
EN
Printing
10
Connecting the camera to a printer
Use the provided USB cable to connect the camera to a PictBridge-compatible printer.
1
Turn the printer on and connect the camera’s multi-connector to the printer’s USB
port with the USB cable.
For details on how to turn the printer on and the position of the USB port, refer to the printer’s
manual.
2
Turn on the camera.
The selection screen for the USB connection is displayed.
3
Use
p
to select [EASY PRINT] or [CUSTOM PRINT].
If you select [EASY PRINT]
Go to “Easy printing” (
g
P. 9 4 )
If you select [CUSTOM PRINT]
[ONE MOMENT]
is displayed and the camera and printer
are connected.
Go to “Custom printing” (gP. 95)
x
Notes
If the screen is not displayed after a few minutes,
disconnect the USB Cable and start again from Step 1.
Easy printing
1
Use
bd
to display the pictures you want to print on the camera.
Display the image you want to print on the camera and
connect the camera with a printer using a USB cable.
The screen on the right appears shortly.
2
Press the
<
(print) button.
The picture selection screen appears when printing is
completed. To print another picture, use
bd
to select the
image and press the
<
button.
To exit, unplug the USB cable from the camera while the
picture selection screen is displayed.
Multi-connector
USB cable
STORAGE
MTP
CONTROL
EASY PRINT
CUSTOM PRINT
USB
SELECT GO
PC / CUSTOM PRINT
EASY PRINT START
E-450_MASTER.fm Seite 94 Donnerstag, 16. April 2009 10:40 10
95
EN
Printing
10
Custom printing
1
Follow the operation guide to set a print option.
Selecting the print mode
Select the type of printing (print mode). The available print
modes are as shown below.
[PRINT]
Prints selected pictures.
[ALL PRINT]
Prints all the pictures stored in the card
and makes one print for each picture.
[MULTI PRINT]
Prints multiple copies of one image in
separate frames on a single sheet.
[ALL INDEX]
Prints an index of all the pictures stored
in the card.
[PRINT ORDER]
Prints according to the print reservation
you made. If there is no picture with
print reservation, this is not available. (
g
P. 91)
Setting the print paper items
This setting varies with the type of printer. If only the printer’s STANDARD setting is available, you
cannot change the setting.
[SIZE]
Sets the paper size that the printer
supports.
[BORDERLESS]
Selects whether the picture is printed
on the entire page or inside a blank
frame.
[PICS/SHEET]
Selects the number of pictures per
sheet. Displayed when you have
selected
[MULTI PRINT]
.
Selecting pictures you want to print
Select pictures you want to print. The selected pictures can be printed later (single-frame
reservation) or the picture you are displaying can be printed right away.
[PRINT]
(
f
) Prints the currently displayed
picture. If there is a picture that
[SINGLE PRINT]
reservation has
already been applied to, only that
reserved picture will be printed.
[SINGLE PRINT]
(
t
) Applies print reservation to the
currently displayed picture. If you
want to apply reservation to other
pictures after applying
[SINGLE
PRINT]
, use
bd
to select them.
[MORE]
(
u
) Sets the number of prints and
other items for the currently displayed picture, and whether or not to
print it. For operation, refer to “Setting printing data” (
g
P. 96) in the
next section.
PRINT
ALL PRINT
MULTI PRINT
ALL INDEX
PRINT ORDER
PRINT MODE SELECT
EXIT SELECT GO
Follow the operation guide displayed
here.
PRINTPAPER
STANDARD STANDARD
SIZE BORDERLESS
CANCEL SELECT
GO
16
PRINTPAPER
STANDARD
SIZE PICS/SHEET
CANCEL SELECT
GO
SINGLEPRINT
SELECT
MORE
PRINT
E-450_MASTER.fm Seite 95 Donnerstag, 16. April 2009 10:40 10
96
EN
Printing
10
Setting printing data
Select whether to print printing data such as the date and time or file name on the picture when
printing.
[
<
x]
Sets the number of prints.
[DATE]
Prints the date and time recorded on the
picture.
[FILE NAME]
Prints the file name recorded on the picture.
[
P
]
Trims the picture for printing. Set the
trimming size with the control dial and the
trimming position with the arrow pad.
2
Once you have set the pictures for printing and
printing data, select [PRINT], then press the
i
button.
[PRINT]
Transfers images you print to the printer.
[CANCEL]
Resets the settings. All print reservation
data will be lost. If you want to keep the
print reservation data and make other
settings, press
b
. This returns you to the
previous setting.
To stop and cancel printing, press the
i
button.
[CONTINUE]
Continues printing.
[CANCEL]
Cancels printing. All print reservation data
will be lost.
DATE
FILE NAME
1
WITHOUT
WITHOUT
PRINT INFO
SELECT SET GO
PRINT
PRINT
CANCEL
CANCEL SELECT
GO
CONTINUE
CANCEL
SELECT GO
PRINT
E-450_MASTER.fm Seite 96 Donnerstag, 16. April 2009 10:40 10
11
Using the OLYMPUS Master software
11
97
EN
Using the OLYMPUS Master software
Just connect the camera to a computer with the USB cable and you can easily transfer images
stored on the card to the computer with the provided OLYMPUS Master software.
What is OLYMPUS Master?
OLYMPUS Master is an image management program with viewing and editing features for
pictures taken with your digital camera. Once installed on your computer, you can take
advantage of the following.
For information about OLYMPUS Master’s other features, as well as for details on how to use the
software, refer to “Help” in OLYMPUS Master software.
Flowchart
Things to prepare
OLYMPUS Master 2 CD-ROM
USB cable
Computer that fulfills the operating
environment
(For the required operating environment, refer
to the OLYMPUS Master installation guide.)
Installing OLYMPUS Master
(Refer to the installation guide included with the OLYMPUS Master)
Connecting the camera with your computer using the provided USB cable (
g
P. 98)
Starting OLYMPUS Master (
g
P. 99)
Saving pictures to your computer (
g
P. 99)
Disconnecting the camera from your computer (
g
P. 99)
Using the provided OLYMPUS Master software
z
Transferring images from the camera or
removable media to your computer
z
Viewing images
You can also enjoy slideshows and sound
playback.
z
Grouping and organizing images
You can organize images into albums or
folders. Transferred images are automatically
organized by shooting date, allowing you to
quickly find the particular images you want.
z
Correcting images using filter and
correction functions
z
Editing images
You can rotate, trim or change the image size.
z
A variety of printing formats
You can easily make prints of your pictures.
z
Updating the camera firmware
z
Developing RAW images
E-450_MASTER.fm Seite 97 Donnerstag, 16. April 2009 10:40 10
Using the OLYMPUS Master software
11
98
EN
Connect the camera to your computer with the provided USB cable.
1
Use the provided USB cable to connect the computer’s USB port to the camera’s
multi-connector.
The location of the USB port varies with the computer. For details, refer to your computer’s
manual.
2
Set the camera’s power switch to ON.
The selection screen for the USB connection is displayed.
3
Press
ac
to select [STORAGE]. Press the
i
button.
4
The computer recognizes the camera as a new
device.
Windows
When you connect the camera to the computer for the first
time, the computer automatically recognizes the camera.
Click “OK” when the message saying that the installation is completed appears.
The computer recognizes the camera as a “Removable Disk ”.
Macintosh
iPhoto is the default image management application for Mac OS. When you connect your
Olympus digital camera for the first time, iPhoto will start up automatically. Close iPhoto and
start OLYMPUS Master.
x
Notes
When the camera is connected to the computer, none of the camera buttons are functional.
Connecting the camera to a computer
Look for this
mark.
Smaller terminal
Term ina l
USB port
USB cable
Multi-connector
E-450_MASTER.fm Seite 98 Donnerstag, 16. April 2009 10:40 10
Using the OLYMPUS Master software
11
99
EN
Windows
1
Double-click the “OLYMPUS Master 2” icon on the desktop.
Macintosh
1
Double-click the “OLYMPUS Master 2” icon in the “OLYMPUS Master 2” folder.
The browse window is displayed.
When OLYMPUS Master is started up for the first time after installation, the OLYMPUS Master
initial setting screen and user registration screen are displayed before the browse window.
Follow the on-screen instructions.
To exit OLYMPUS Master
1
Click “Exit” on any window.
OLYMPUS Master is exited.
Downloading and saving images
1
Click “Transfer Images” on the browse window, and
then click “From Camera” .
The window for selecting the pictures you want to transfer from
the camera is displayed. All the images in the camera are
displayed.
2
Select “New Album” and enter an album name.
3
Select the image files and click “Transfer Images”.
A window indicating that the download is complete is displayed.
4
Click “Browse images now”.
The downloaded images are displayed in the browse window.
Disconnecting the camera from your computer
1
Make sure that the card access lamp has stopped
blinking.
Start up the OLYMPUS Master software
Displaying camera images on a computer
Card access lamp
E-450_MASTER.fm Seite 99 Donnerstag, 16. April 2009 10:40 10
Using the OLYMPUS Master software
11
100
EN
2
Prepare to remove the USB cable.
Windows
1)
In the system tray, click the “Unplug or Eject Hardware”
icon .
2)
Click on the pop-up message.
3)
Click “OK” on the “Safe to Remove Hardware” window.
Macintosh
1)
The trash icon changes to the eject icon when the
“Untitled” or “NO_NAME” icon on the desktop is dragged.
Drag and drop it on the eject icon.
3
Unplug the USB cable from the camera.
x
Notes
For Windows users:
When you click “Unplug or Eject Hardware”, a warning message may be displayed. In such
case, make sure that no image data is being downloaded from the camera, and that there are
no applications open that were accessing the camera image files. Close any such applications
and click “Unplug or Eject Hardware” again and then remove the cable.
E-450_MASTER.fm Seite 100 Donnerstag, 16. April 2009 10:40 10
Using the OLYMPUS Master software
11
101
EN
1
Click the “Album” tab on the browse window and select
the album that you want to view.
The selected album image is displayed in the thumbnail area.
2
Double-click the still picture thumbnail that you want to
view.
OLYMPUS Master switches to the image edit window and the
picture is enlarged.
Click “Back” to return to the browse window.
Please take care that your battery is fully charged!
1
Make sure that your computer is connected to the Internet.
2
Plug the USB cable into the USB port on the computer.
3
Plug the other end of the USB cable into the camera’s multi-connector.
The camera turns on automatically.
The monitor turns on and the selection screen for the USB connection is displayed.
4
Select [STORAGE] and press the
i
button.
5
In the browse window, select “Camera”, then “Update Camera/Add Display
Language”.
The confirmation window for updating is displayed.
6
Click “OK”.
The updating the camera window is displayed.
7
Click “Add Language” in the updating
camera display.
The “Add Display Language of Camera” window
is displayed.
8
Click and select a language.
9
Click “Add”.
The new language is downloaded to your camera. Please
do not remove any cable or the battery while the camera
is processing.
Viewing still images
To increase the number of languages
Thumbnail
E-450_MASTER.fm Seite 101 Donnerstag, 16. April 2009 10:40 10
Using the OLYMPUS Master software
11
102
EN
10
After the download procedure the camera display will show “OK”. You can remove
the cables and turn power off. After restarting the camera you will be able to choose
the new language from [
W
].
Your camera supports the USB Mass Storage Class. You can transfer images to a computer by
connecting the camera to the computer with the provided USB cable. This can be done even
without using OLYMPUS Master. The following operating systems are compatible with the USB
connection:
Windows : 2000 Professional/XP Home Edition/XP Professional/Vista
Macintosh : Mac OS X v10.3 or later
x
Notes
If your computer is running Windows Vista, select
[MTP]
in Step 3 on page 98 to use Windows
Photo Gallery.
Data transfer is not guaranteed in the following environments, even if your computer is equipped
with a USB port.
Computers with a USB port added by means of an extension card, etc.
Computers without a factory-installed OS and home-built computers
Transferring images to your computer without using
OLYMPUS Master
E-450_MASTER.fm Seite 102 Donnerstag, 16. April 2009 10:40 10
12
Shooting tips and maintenance
12
103
EN
Shooting tips and maintenance
Tips before you start taking pictures
The camera does not turn on even when a battery is loaded
The battery is not fully charged
Charge the battery with the charger.
The battery is temporarily unable to function because of the cold
Battery performance declines in low temperatures, and the charge may not be sufficient to turn on the
camera. Remove the battery and warm it by putting it in your pocket for a while.
No picture is taken when the shutter button is pressed
The camera has turned off automatically
To save battery power, if there is no operation, the camera goes into sleep mode after a fixed period
of time and the camera stops operating. The camera activates again when you touch the shutter
button or any other button. The camera will turn off automatically if there is no further operation for 4
hours. The camera will not work until it is turned back on.
g
“SLEEP” (P. 86)
The flash is charging
When the flash is raised, the
#
symbol blinking in the super control panel or the viewfinder indicates
that the flash is charging. Wait for the blinking to stop, then press the shutter button.
Unable to focus
When the AF confirmation mark in the viewfinder is blinking, it indicates that the camera is unable to
focus using AF. Press the shutter button again.
Noise reduction is activated
When shooting night scenes, shutter speeds are slower and noise tends to appear in images. The
camera activates the noise-reduction process after shooting at slow shutter speeds. During which,
shooting is not allowed. You can set
[NOISE REDUCT.]
to
[OFF]
.
g
“Noise reduction” (P. 65)
The date and time has not been set
The camera is used with the settings at the time of purchase
The date and time of the camera is not set when purchased. Set the date and time before using the
camera.
g
“Setting the date/time” (P. 15)
The battery has been removed from the camera
The date and time settings will be returned to the factory default settings if the camera is left without
the battery for approximately 1 day. The settings will be canceled more quickly if the battery was only
loaded in the camera for a short time before being removed. Before taking important pictures, check
that the date and time settings are correct.
Shooting tips
Focusing on the subject
There are several ways to focus, depending on the subject.
AF target is not focused on the subject
Use focus lock to focus the AF target on the subject.
g
“Focus lock – If correct focus cannot be
obtained” (P. 54)
Other things instead of the subject are in focus on the respective AF targets
Set
[AF AREA]
to
R
and focus on the center of the image.
g
“AF target selection” (P. 53)
Shooting tips and information
E-450_MASTER.fm Seite 103 Donnerstag, 16. April 2009 10:40 10
Shooting tips and maintenance
12
104
EN
The subject is moving quickly
Focus the camera on a point roughly the same distance away as the subject you want to shoot (by
pressing the shutter button halfway), and then recompose your picture and wait for the subject to
enter the frame.
Close up on the subject using macro lens
When using macro lens to close up on the subject, it is difficult to focus with AF when the
enlargement ratio of the subject is bigger. Set to manual focus (MF), rotate the focus ring and focus
manually.
g
“MF (manual focus)” (P. 52)
Taking pictures in low light conditions
The built-in flash can be set to function as an AF illuminator. The flash helps to focus in low-light
conditions in the AF mode when raised.
g
“Built-in flash shooting” (P. 68), “AF ILLUMINAT.” (P. 83)
Subjects that are difficult to focus on
It may be difficult to focus with auto focus in the following situations.
In any situation, focus on something with high contrast that is at the same distance as the
subject, determine the composition and shoot the picture.
Taking pictures without blurring
There are several factors that can cause the picture to blur.
The subject is too dark
Change the shutter speed to match the brightness of the subject. If the shutter speed is set low to
shoot a dark subject, blurring is likely to occur if the subject moves. In addition, when the flash is
turned off in
Y
(Scene mode), the shutter speed becomes slower.
Mount the camera on a tripod. Using the remote control (optional) to close the shutter is also
effective for reducing blurring.
There are also ways to shoot with [q] (DIS MODE) under Y (Scene mode). As the ISO
sensitivity increases automatically, you can hand hold the camera and take pictures in low light
situations with the flash off.
The camera or your hand moves when pressing the shutter button
Press the shutter button gently or hold the camera securely with both hands.
You can avoid camera movement while pressing the shutter button by using self-timer or anti-shock.
g
“Self-timer shooting” (P. 56), “Anti-shock” (P. 58)
Taking pictures with less flash
When using auto flash, the flash will light up automatically when it is not bright enough and
camera blur is more likely to occur. If the subject is too far away, the flash may have no effect.
Here is how to take pictures without the flash in this type of situation.
Set
Y
(Scene mode) to [
q
] (DIS MODE)
As the ISO sensitivity increases automatically, you can hand hold the camera and take pictures in low
light situations with the flash off.
Increase the ISO setting
Increase the value of the ISO setting. The image may become grainy.
g
“ISO sensitivity setting” (P. 50)
AF confirmation mark is
blinking.
These subjects are not
focused.
Subject with low contrast Excessively bright light
in center of frame
Subject with
repeated patterns
AF confirmation mark
lights up but the subject is
not focused.
Subjects at different
distances
Fast-moving subject Subject not inside
AF area
E-450_MASTER.fm Seite 104 Donnerstag, 16. April 2009 10:40 10
Shooting tips and maintenance
12
105
EN
The picture is too grainy
Increasing the ISO sensitivity
When you increase the ISO setting, noise, which appears as spots of unwanted color or unevenness
in the color, can be introduced and give the picture a grainy appearance. This camera is equipped
with a function to allow shooting at high sensitivity while suppressing noise; however, increasing the
ISO sensitivity creates grainier pictures than when using a lower sensitivity.
g
“ISO sensitivity setting” (P. 50)
Image taken appears whitish
This may occur when the picture is taken in backlight or semi-backlight conditions. This is due
to a phenomenon called flare or ghosting. As far as possible, consider a composition where
strong light source is not taken in the picture. Flare may occur even when a light source is not
present in the picture. Use a lens hood to shade the lens from the light source. If a lens hood
does not have effect, use your hand to shade the lens from the light.
g
“Interchangeable lenses” (P. 115)
Taking pictures with the correct color
The reason why there are differences between the colors in a picture and the actual colors
taken and the actual color is the light source illuminating the subject.
[WB]
is the function that
allows the camera to determine the correct colors. Normally, the
[AUTO]
setting provides the
optimal white balance, but depending on the subject, it may be better to experiment with
changing the
[WB]
setting.
When the subject is in the shade on a sunny day
When the subject is illuminated by both natural light and indoor lighting, such as when near a window
When there is no white in the frame
g“Selecting the white balance” (P. 60)
Taking pictures of a white beach or snow scene
In normal cases, white subjects such as snow will appear darker than usual when the picture is
taken. There are several ways to capture the whiteness.
Adjust the exposure compensation toward
[+]
.
g
“Exposure compensation” (P. 48)
Use
[
g
]
(BEACH & SNOW) in
Y
(Scene mode) to take the picture. It is most suitable for taking
pictures of the sea in a sunny day or snow-capped mountains.
g
“Mode dial” (P. 4)
Use
[
n
HI]
(Spot metering highlight control).
Press the shutter button halfway at the center of the viewfinder where you wish to highlight the
whiteness. The metered part at the center will be set to appear whiter. g“Changing the metering
mode” (P. 47)
Use the AE bracketing function to take the picture.
If you do not know the amount of exposure compensation, try using AE bracketing. The
compensation value changes a little every time you press the shutter button. If you set a larger
exposure compensation, you can change the compensation value either upwards or downwards
based on that value and shoot the picture. g“AE bracketing” (P. 49)
E-450_MASTER.fm Seite 105 Donnerstag, 16. April 2009 10:40 10
Shooting tips and maintenance
12
106
EN
Taking pictures of a subject against backlight
If the background is too bright compared to the subject, the exposure will be affected at the
bright parts and the subject will appear darker. This is because the camera determines the
exposure from the brightness of the whole screen.
Set
[METERING]
to
[
n
]
(spot metering) to measure the exposure of the subject in the center of the
picture. To change the composition, place the subject in the center of the picture. While holding down
the
AEL
/
AFL
button, change the composition and press the shutter button.
g
“Changing the
metering mode” (P. 47)
Activate the flash, set the flash mode to
[
#
]
(fill-in flash) and shoot the picture. You can shoot a
subject against backlight without the face of the subject appearing dark.
[
#
]
(fill-in flash) is used for
shooting against backlight and under fluorescent and other artificial lighting.
g
“Flash mode
setting” (P. 66)
Image turns out too bright or too dark
When taking pictures in
S
mode or
A
mode, the displayed shutter speed or aperture setting
may blink. A blinking display means that the correct exposure cannot be obtained. If you take
the picture as is, the picture will appear too bright or too dark. If that happens, change the
aperture setting or shutter speed.
g
“Aperture priority shooting” (P. 43), “Shutter priority shooting” (P. 44), “Exposure warning
display” (P. 118)
Unknown bright dot(s) appear on the subject in the picture taken
This may be due to stuck pixel(s) on the image pickup device. Perform
[PIXEL MAPPING]
. If
the problem persists, repeat pixel mapping a few times.
g
“Pixel mapping – Checking the
image processing functions” (P. 112)
Additional shooting tips and information
Increasing the number of pictures that can be taken
The captured image will be recorded on the card. The following ways describe how to record
more images.
Change the record mode.
The size of an image varies with the record mode. When you are not sure of the available card
capacity, change the image mode and shoot the picture. The smaller the image size and the
higher the compression, the smaller the size of the image becomes. To make the file size small,
combine the image size and compression rate and register it with [K SET].
You can further reduce the number of pixels by setting
[PIXEL COUNT]
to fewer pixels for image
size
[
X
]
or
[
W
]
.
g
“Selecting the record mode” (P. 59), “
K
SET” (P. 88), “PIXEL COUNT” (P. 88)
Use a card with large capacity.
The number of recordable images varies with the capacity of the card. Use a card with large
capacity.
Using a new card
If you use a non-Olympus card or a card used for another application, such as for a computer,
the message
[CARD ERROR]
is displayed. To use this card with this camera, use the
[FORMAT]
function to format the card.
g
“Formatting the card” (P. 114)
E-450_MASTER.fm Seite 106 Donnerstag, 16. April 2009 10:40 10
Shooting tips and maintenance
12
107
EN
Extending the useful life of the battery
Performing any of the following operations when not actually taking pictures can deplete the
battery power.
Repeatedly pressing the shutter button halfway
Repeatedly playing back the captured images over a long period of time
Using the live view function over a long period
To save battery power, turn off the camera whenever it is not in use.
Functions that cannot be selected from menus
Some items may not be selectable from the menus when using the arrow pad.
Items that cannot be set with the current shooting mode
Items that cannot be set because of an item that has already been set:
Combination of [j] and [NOISE REDUCT.], etc.
Cannot use the Imager AF
Imager AF is available only when using compatible lenses. For the latest information about
Olympus lenses compatible with Imager AF, visit the Olympus website.
Selecting the optimal record mode
Record modes are divided into 2 main types: RAW and JPEG. RAW records without reflecting
the settings for white balance, contrast, etc. on the images themselves. JPEG records as
images that reflect these settings. JPEG also compresses images to reduce the file size when
recording them. For JPEG, you can register four combinations of images sizes (
Y
,
X
,
W
) and
compression rates (SF, F, N, B) from the 12 total combinations available. The higher the
compression rate, the grainier the image will appear when enlarged during display. A rough
guide for selection is shown below.
To make fine-adjustments of the shooting settings on the computer
[RAW]
To print large images on A3/A4 paper/To edit and process images on a computer
Images size
Y
and compression rate SF, F, N, or B
To print postcard-size images
Images size
X
and compression rate SF, F, N, or B
To send as an e-mail attachment or post on a web site
Images size
W
and compression rate SF, F, N, or B
g
“Record mode and file size/number of storable still pictures” (P. 121)
To restore functions to their settings at the time of purchase
The settings are saved even when the power is switched off.
To return to the factory default settings, set
[RESET]
under
[CUSTOM RESET]
. You can
register up to two types of settings to be reset. Set various functions of the camera and
register using
[RESET1]
or
[RESET2]
under
[CUSTOM RESET]
.
g
“Resetting to the
factory default settings” (P. 30)
E-450_MASTER.fm Seite 107 Donnerstag, 16. April 2009 10:40 10
Shooting tips and maintenance
12
108
EN
Confirming the exposure when it is difficult to view the monitor outdoors
The monitor may be difficult to view and the exposure difficult to confirm when shooting
outdoors.
During live view, press the
INFO
button repeatedly to display the histogram.
The following shows you how to read the histogram display easily.
How to read the histogram
1
If the graph has many peaks around here, the image will appear
mostly black.
2
If the graph has many peaks around here, the image will appear
mostly white.
3
The part indicated in green in the histogram shows the luminance
distribution within the spot metering area.
g
“Switching the information display” (P. 40)
Playback tips
Understanding the settings and other information of pictures taken
Play back a picture, and press the
INFO
button. Press the button repeatedly to change the
amount of information displayed.
g
“Information display” (P. 76)
Viewing pictures on a computer
Viewing the entire picture on a computer screen
The size of the picture displayed on a computer screen changes depending on the computer
settings. When the monitor setting is 1024 x 768 and you are using Internet Explorer to view a
picture with an image size of 2048 x 1536 at 100%, the entire picture cannot be viewed without
scrolling. There are several ways you can view the entire picture on the computer screen.
View the picture using image browsing software
Install the OLYMPUS Master software from the provided CD-ROM.
Change the monitor setting
The icons on the computer desktop may be rearranged. For details of changing the settings on your
computer, refer to the computer’s manual.
To view recorded images in RAW
Install the OLYMPUS Master software from the provided CD-ROM. You can use the RAW
development function in OLYMPUS Master to develop the RAW image in the camera setting
used during shooting, as well as change detailed settings such as white balance and contrast.
1
2
3
E-450_MASTER.fm Seite 108 Donnerstag, 16. April 2009 10:40 10
Shooting tips and maintenance
12
109
EN
Error codes
Viewfinder indications Monitor indication Possible cause Corrective action
Normal indication
NO CARD
The card is not
inserted, or it cannot be
recognized.
Insert a card or insert a
different card.
CARD ERROR
There is a problem with
the card.
Insert the card again.
If the problem persists,
format the card. If the
card cannot be
formatted, it cannot be
used.
WRITE PROTECT
Writing to the card is
prohibited.
The card has been set
to read-only setting with
the computer.
Reset the card with the
computer.
No indication
CARD FULL
The card is full. No
more pictures can be
taken or no more
information such as
print reservation can be
recorded.
Replace the card or
erase unwanted
pictures.
Before erasing,
download important
images to a PC.
There is no space in the
card and print
reservation or new
images cannot be
recorded.
Replace the card or
erase unwanted
pictures.
Before erasing,
download important
images to a PC.
No indication
xD-Picture Cards
cannot be read or is not
formatted.
Select
[xD CARD
CLEAN]
, press the
i
button and turn off the
camera. Remove the
card and wipe dry the
metallic surface with a
soft, dry cloth.
Select
[FORMAT]
[YES]
, and then press
the
i
button to
format the card.
Formatting the card
erases all data on the
card.
No indication
NO PICTURE
There are no pictures
on the card.
The card contains no
pictures.
Record pictures and
play back.
xD CARD CLEAN
FORMAT
Clean the terminal of the
xD card with the dry cloth.
CARD SETUP
SELECT GO
E-450_MASTER.fm Seite 109 Donnerstag, 16. April 2009 10:40 10
Shooting tips and maintenance
12
110
EN
No indication
PICTURE ERROR
The selected picture
cannot be displayed for
playback due to a
problem with this
picture. Or the picture
cannot be used for
playback on this
camera.
Use image processing
software to view the
picture on a PC.
If that cannot be done,
the image file is
damaged.
No indication
THE IMAGE CANNOT
BE EDITED
Pictures taken with
another camera cannot
be edited on this
camera.
Use image processing
software to edit the
picture.
No indication
Internal camera
temperature is too high.
Please wait for cooling
before camera use.
Extended use of live
view or sequential
shooting has increased
the internal
temperature of the
camera.
Wait a moment for the
camera to turn off
automatically. Allow the
internal temperature of
the camera to cool
before resuming
operations.
CARD-COVER OPEN
The card cover is open. Close the card cover.
No indication
BATTERY EMPTY
The battery is drained. Charge the battery.
No indication
NO CONNECTION
The camera is not
connected to the
computer or printer
correctly.
Disconnect the camera
and connect it again
correctly.
No indication
NO PAPER
There is no paper in the
printer.
Load some paper in the
printer.
No indication
NO INK
The printer has run out
of ink.
Replace the ink
cartridge in the printer.
No indication
JAMMED
The paper is jammed. Remove the jammed
paper.
Viewfinder indications Monitor indication Possible cause Corrective action
E-450_MASTER.fm Seite 110 Donnerstag, 16. April 2009 10:40 10
Shooting tips and maintenance
12
111
EN
Cleaning and storing the camera
Cleaning the camera
Turn off the camera and remove the battery before cleaning the camera.
Exterior:
Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water and wring
well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used the
camera at the beach, use a cloth soaked in clean water and well wrung.
Monitor and viewfinder:
Wipe gently with a soft cloth.
Lens, mirror and focusing screen:
Blow dust off the lens, mirror and focusing screen with a commercially available blower. For the lens,
wipe gently with a lens cleaning paper.
Storage
When not using the camera for a prolonged period, remove the battery and card. Store the
camera in a cool, dry place that is well ventilated.
Insert the battery periodically and test the camera’s functions.
Cleaning and checking the image pickup device
This camera incorporates a dust reduction function to keep dust from getting on the image
pickup device and to remove any dust or dirt from the image pickup device surface with
ultrasonic vibrations. Dust reduction is activated when the power switch is set to ON and when
starting and stopping live view. The dust reduction function operates at the same time as the
pixel mapping, which checks the image pickup device and image processing circuitry. Since
dust reduction is activated every time the camera’s power is turned on, the camera should be
held upright for the dust reduction function to be effective. The SSWF indicator blinks while dust
reduction is working.
g
“SSWF indicator” (P. 14)
No indication SETTINGS CHANGED
The printer’s paper
cassette has been
removed or the printer
has been manipulated
while making settings
on the camera.
Do not manipulate the
printer while making
settings on the camera.
No indication
PRINT ERROR
There is a problem with
the printer and/or
camera.
Turn off camera and
printer. Check the
printer and remedy any
problems before turning
the power on again.
No indication
CANNOT PRINT
Pictures recorded on
other cameras may not
be printed on this
camera.
Use a personal
computer to print.
Camera maintenance
Viewfinder indications Monitor indication Possible cause Corrective action
E-450_MASTER.fm Seite 111 Donnerstag, 16. April 2009 10:40 10
Shooting tips and maintenance
12
112
EN
x
Notes
Do not use strong solvents such as benzene or alcohol, or a chemically treated cloth.
Avoid storing the camera in places where chemicals are treated, in order to protect the camera
from corrosion.
Mold may form on the lens surface if the lens is left dirty.
Check each part of the camera before use if it has not been used for a long time. Before taking
important pictures, be sure to take a test shot and check that the camera works properly.
Cleaning mode – Removing dust
If dust or dirt gets on the image pickup device, black dots may appear in the picture. Contact
your Olympus Authorized Service Center to have the image pickup device physically cleaned.
The image pickup device is a precision device and is easily damaged. When cleaning the
image pickup device yourself, be sure to follow the instructions below. If power runs out during
cleaning, the shutter will close, which may cause the shutter curtain and mirror to break. Keep
an eye on the remaining battery power.
1
Remove the lens from the camera, and set the
power switch to ON.
2
MENU
[
Y
]
[
h
]
[CLEANING MODE]
3
Press
d
, then press the
i
button.
The camera enters the cleaning mode.
4
Press the shutter button all the way.
The mirror goes up and the shutter curtain opens.
5
Clean the image pickup device.
Carefully blow off any dust on the surface of the image
pickup device by using a mechanical blower (commercially
available).
6
Be careful not to catch the mechanical blower in the shutter curtain when turning
the power off to finish cleaning.
If the camera turns off, the shutter curtain closes, causing the mirror to fall.
x
Notes
Be careful not to let the mechanical blower (commercially available) touch the image pickup
device. If the blower touches the image pickup device, the image pickup device will be
damaged.
Never put the mechanical blower behind the lens mount. If the power turns off, the shutter
closes, breaking the shutter curtain.
Do not use anything other than the mechanical blower. If high-pressure gas is sprayed onto the
image pickup device, it will freeze on the image pickup device’s surface, damaging the image
pickup device.
Pixel mapping – Checking the image processing functions
The pixel mapping feature allows the camera to check and adjust the image pickup device and
image processing functions. After using the monitor or taking continuous shots, wait for at least
one minute before using the pixel mapping function to ensure that it operates correctly.
1
MENU
[
Z
]
[PIXEL MAPPING]
2
Press
d
, then press the
i
button.
The
[BUSY]
bar is displayed when pixel mapping is in progress. When pixel mapping is
finished, the menu is restored.
x
Notes
If you accidentally turn the camera off during pixel mapping, start again from Step 1.
CLEANING MODE
CANCEL SELECT
GO
E-450_MASTER.fm Seite 112 Donnerstag, 16. April 2009 10:40 10
13
Information
13
113
EN
Information
Usable cards
“Card” in this manual refers to a recording medium. This camera can use CompactFlash,
Microdrive or xD-Picture Card (optional).
Precautions when using a Microdrive
A Microdrive is a medium that uses a compact hard disk drive. Because the disk drive rotates, a
Microdrive is not as resistant to vibration or impact as other cards. Special care is needed when
using a Microdrive (especially during recording and playback) to make sure the camera is not
subjected to shock or vibrations. Be sure to read the following precautions before using a
Microdrive.
Also, refer to the manuals provided with your Microdrive.
Be very careful when putting the camera down during recording. Place it gently on a firm
surface.
Do not use the camera in places subject to vibrations or excessive shock, such as at a
construction site or in a car while driving along a bumpy road.
Do not take a Microdrive close to areas where it may be exposed to strong magnetism.
The Microdrive may not function correctly under low air pressure conditions, like in altitudes of
3,000 m (9,843 ft.) and higher.
x
Notes
The data in the card will not be erased completely even after formatting the card or deleting the
data. When discarding, destroy the card to prevent leakage of personal information.
Card basics
CompactFlash
A CompactFlash is a large-
capacity solid state flash
memory card. You can use
commercially available cards.
Microdrive
A Microdrive is a medium that uses
a large-capacity compact hard disk
drive. You can use a Microdrive that
supports CF+Type II (CompactFlash
extension standard).
xD-Picture Card
An xD-Picture Card is a
recording medium used
mainly in compact cameras.
E-450_MASTER.fm Seite 113 Donnerstag, 16. April 2009 10:40 10
Information
13
114
EN
Formatting the card
Non-Olympus cards or cards formatted on a computer must be formatted with the camera
before they can be used.
All data stored on the card, including protected images, is erased when the card is formatted.
When formatting a used card, confirm there are no images that you still want to keep on the card.
1
MENU
[
W
]
[CARD SETUP]
2
Use
ac
to select [FORMAT], then press the
i
button.
3
Use
ac
to select [YES], then press the
i
button.
Formatting is performed.
When inserting cards into the two card slots:
j
Select the card to be used in
[CF/xD]
.
g
“CF/xD” (P. 90)
z
Use the single Olympus lithium-ion battery (BLS-1).
Other batteries cannot be used.
z
The camera’s power consumption varies widely with usage and other conditions.
z
As the following consume a lot of power even without shooting, the battery will be drained
quickly.
Performing auto focus repeatedly by pressing the shutter button halfway in shooting
mode.
Using live view.
Displaying images on the LCD monitor for a prolonged period.
When connected to a computer or printer.
z
When using a drained battery, the camera may turn off without the low battery warning being
displayed.
z
The battery will not be fully charged at the time of purchase. Charge the battery using the
designated charger (BCS-1) before use.
z
The normal charging time of the provided rechargeable battery is approximately 3 hours
30 minutes (estimated).
z
Do not use chargers other than the one designated.
z
The charger can be used in most home electrical sources within the range of 100 V to 240 V
AC (50/60Hz) around the world. However, depending on the country or area you are in, the
AC wall outlet may be shaped differently and the charger may require a plug adapter to
match the wall outlet. For details, ask at your local electrical shop or travel agent.
z
Do not use commercially available travel adaptors as the charger may malfunction.
TIPS
Battery and charger
Using your charger abroad
ALL ERASE
FORMAT
CARD SETUP
CANCEL SELECT
GO
E-450_MASTER.fm Seite 114 Donnerstag, 16. April 2009 10:40 10
Information
13
115
EN
Select the lens that you want to shoot with.
Use a specified Four Thirds lens (Four Thirds mount). When a non-specified lens is used, auto
focus and light metering will not function correctly. In some cases, other functions may not work
either.
Four Thirds mount
Developed by Olympus as the lens mount standard for the Four Thirds system. These all-new
interchangeable lenses featuring the Four Thirds mount were developed from the ground up
based on optic engineering exclusively for digital cameras.
ZUIKO DIGITAL interchangeable lens
Four Thirds system interchangeable lens are designed to withstand rigorous professional use.
The Four Thirds system makes it possible for a fast lens to be compact and lightweight as well.
Focal length and depth of field of Four Thirds system lenses
When compared to 35-mm cameras, Four Thirds system cameras achieve different effects at
the same focal length and aperture.
Focal length
At the same focal length of a 35-mm camera, a Four Thirds system camera can achieve a
focal length equivalent to twice that of a 35-mm camera. This enables the design of compact
telephoto lenses. A 14–50 mm Four Thirds system lens, for example, is equivalent to
a 28–100 mm lens for a 35-mm camera.
When the image angle of Four Thirds system lens is converted to that of a 35-mm camera, the
perspective is the same as that of a 35-mm camera.
Depth of Field
A Four Thirds system camera can achieve a depth of field equivalent to two times deeper than
that of a 35-mm camera. This enables more light to enter through the aperture. A Four Thirds
system lens with f2.0 brightness, for example, is equivalent to f4.0 when converted to the
aperture of a 35-mm camera.
You can achieve the same amount of background blur as if you were using a 35-mm camera.
x
Notes
When you attach or remove the body cap and lens from the camera, keep the lens mount on the
camera pointed downward. This helps prevent dust and other foreign matter from getting inside
the camera.
Do not remove the body cap or attach the lens in dusty places.
Do not point the lens attached to the camera toward the sun. This may cause the camera to
malfunction or even ignite due to the magnifying effect of sunlight focusing through the lens.
Be careful not to lose the body cap and rear cap.
Attach the body cap to the camera to prevent dust from getting inside when no lens is attached.
Interchangeable lenses
E-450_MASTER.fm Seite 115 Donnerstag, 16. April 2009 10:40 10
Information
13
116
EN
ZUIKO DIGITAL lens specifications
Names of parts
1
Hood mount section
2
Filter mount thread
3
Zoom ring
4
Focus ring
5
Mount index
6
Electrical contacts
7
Front cap
8
Rear cap
9
Lens hood
Use the hood when shooting a backlit subject.
The lens hood cannot be attached to the 17.5–45 mm lens.
Attaching the hood
Storing the hood
E-450_MASTER.fm Seite 116 Donnerstag, 16. April 2009 10:40 10
Information
13
117
EN
Main Specifications
Can be used with the optional EX-25 extension tube under the following conditions.
The focus adjustment when EX-25 is used will be MF.
Storage Precautions
Clean the lens after use. Remove dust and dirt on the surface of the lens with a blower brush
or brush. Use commercially available lens cleaning paper to remove the dirt on the lens. Do
not use organic solvents.
Always cap the lens and store it when it is not used.
Do not store in an area with insect repellent.
x
Notes on Shooting
Edges of pictures may be cut off if more than one filter is used or if a thick filter is used.
Items 17.5–45 mm 14–42 mm 40–150 mm 25 mm
Mount FOUR THIRDS mount
Focal length 17.5–45 mm 14–42 mm 40–150 mm 25 mm
Max. aperture f3.5–5.6 f3.5–5.6 f4–5.6 f2.8
Image angle 63°–27° 75°–29° 30°–8.2° 47°
Lens configuration
7 groups,
7 lenses
8 groups,
10 lenses
9 groups,
12 lenses
4 groups,
5 lenses
Multilayer film coating (partially single layered)
Iris control f3.5–22 f3.5–22 f4–22 f2.8–22
Shooting range 0.28 m–
)
0.25 m–
)
0.9 m–
)
0.2 m–
)
Focus adjustment AF/MF switching
Weight (excluding hood
and cap)
210 g 190 g 220 g 95 g
Dimensions
(Max. diameter x overall
length)
Ø
71 x 70 mm Ø
65.5 x 61 mm Ø
65.5 x 72 mm Ø
64 x 23.5 mm
Lens hood mount
k
Bayonet Screw-in type
Filter mount thread
diameter
52 mm 58 mm 43 mm
Lens, focal length Shooting range
Magnification
( ): Calculated based on 35 mm film
camera
17.5–45 mm
17.5 mm
Shooting is not possible since subjects cannot be brought into focus at this
focal length.
28 mm 15.1 cm–15.9 cm 0.89–1.16x (1.78–2.32x)
45 mm 18.4 cm–22.4 cm 0.57–0.91x (1.14–1.82x)
14–42 mm
14 mm
Shooting is not possible since subjects cannot be brought into focus at this
focal length.
25 mm 13.3 cm 1.02x (2.04x)
42 mm 16.2 cm–17.3 cm 0.61–0.69x (1.22–1.38x)
40–150 mm
40 mm 19.0 cm–20.4 cm 0.61–0.70x (1.22–1.40x)
80 mm 28.0 cm–40.6 cm 0.32–0.48x (0.64–0.96x)
150 mm 48.0 cm–118.8 cm 0.17–0.39x (0.34–0.78x)
25 mm 25 mm 11.1 cm–11.2 cm 0.98–1.17x (1.96–2.34x)
E-450_MASTER.fm Seite 117 Donnerstag, 16. April 2009 10:40 10
Information
13
118
EN
In the
P
mode, the camera is programmed such that the aperture value and shutter speed are
automatically selected according to the subject’s brightness as shown below. The program line
diagram varies with the type of lens mounted.
If the optimum exposure cannot be obtained when pressing the shutter button halfway, the
display will blink in the viewfinder and on the super control panel.
Program line diagram (
P
mode)
When using the
14–42 mm f3.5–5.6
zoom lens
(focal length: 14 mm,
ISO100)
Program shift
Exposure warning display
Shooting
mode
Warning display
example (blinking)
Status Action
P
The subject is too dark.
Increase the ISO sensitivity.
Use the flash.
The subject is too bright.
Decrease the ISO sensitivity.
Use a commercially available ND
filter (for adjusting the amount of
light).
A
The subject is underexposed.
Decrease the aperture value.
Increase the ISO sensitivity.
The subject is overexposed.
Increase the aperture value.
Decrease the ISO sensitivity or use
a commercially available ND filter
(for adjusting the amount of light).
Shutter speed
Aperture value
E-450_MASTER.fm Seite 118 Donnerstag, 16. April 2009 10:40 10
Information
13
119
EN
* The aperture value at the moment when its indication blinks varies with the lens type and focal length of
the lens.
S
The subject is
underexposured.
Set the shutter speed slower.
Increase the ISO sensitivity.
The subject is overexposured.
Set the shutter speed faster.
Decrease the ISO sensitivity or use
a commercially available ND filter
(for adjusting the amount of light).
Flash modes that can be set by shooting mode
Shooting
mode
Super control
panel screen
display
Flash mode
Conditions
to timing
Conditions to fire the
flash
Shutter
speed
restrictions
AUTO
P
A
i
&
l
/
*2
j
#
AUTO
Auto flash
1st curtain
Fires automatically in
dark/backlit
*1
conditions
1/60 sec.
1/180 sec.
!
Auto flash
(red-eye reduction)
#
Fill-in flash Always fires
60 sec. –
1/180 sec.
$
Flash off
kk k
!
SLOW
Slow synchronization
(red-eye reduction)
1st curtain
Fires automatically in
dark/backlit
*1
conditions
60 sec. –
1/180 sec.
#
SLOW
Slow synchronization
(1st curtain)
#
SLOW2
Slow synchronization
(2nd curtain)
2nd curtain
#
FULL
Manual flash
(FULL)
1st curtain Always fires
#
1/4
Manual flash (1/4)
#
1/16
Manual flash (1/16)
#
1/64
Manual flash (1/64)
S
M
#
Fill-in flash
H
Fill-in flash
(red-eye reduction)
$
Flash off
kk k
Shooting
mode
Warning display
example (blinking)
Status Action
E-450_MASTER.fm Seite 119 Donnerstag, 16. April 2009 10:40 10
Information
13
120
EN
*1
When the flash is set to the Super FP mode, it detects backlight with longer duration than for normal flash
before emitting light.
g
“Super FP flash” (P. 71)
*2
AUTO
,
!
,
#
cannot be set in NIGHT+PORTRAIT mode.
The higher the color temperature, the richer
the light in bluish tones and the poorer in
reddish; the lower the color temperature,
the richer the light in reddish tones and the
poorer in bluish. The spectral balance of
different white light sources is rated
numerically by color temperature – concept
of physics expressed using the Kelvin (K)
temperature scale. The color of sunlight
and other natural light sources and the
color of a light bulb and other artificial light
sources can be expressed in terms of color
temperature.
It follows, then, that the color temperatures
of fluorescent lights make them unsuitable
as artificial light sources. There are gaps in the hues from the color temperatures of fluorescent
light. If these differences in hue are small, they can be calculated with color temperature and
this is called correlated color temperature.
The 4000K, 4500K and 6600K preset settings in this camera are correlated color temperatures,
and should not be considered strictly as color temperatures. Use these settings for shooting
conditions under fluorescent lights.
S
M
2nd CURTAIN
Fill-in flash/Slow
synchronization
(2nd curtain)
2nd curtain
Always fires
60 sec. –
1/180 sec.
#
FULL
Manual flash
(FULL)
1st curtain
#
1/4
Manual flash (1/4)
#
1/16
Manual flash (1/16)
#
1/64
Manual flash (1/64)
White balance color temperature
Shooting
mode
Super control
panel screen
display
Flash mode
Conditions
to timing
Conditions to fire the
flash
Shutter
speed
restrictions
The color temperatures for each light source
indicated in the above scale are approximate.
Shade on clear day
Daylight fluorescent
Overcast
Clear day
Intense white
fluorescent
Hot white light bulb
Candle frame
White fluorescent
More Red
More Blue
E-450_MASTER.fm Seite 120 Donnerstag, 16. April 2009 10:40 10
Information
13
121
EN
The file size in the table is approximate.
x
Notes
The number of remaining pictures may change according to the subject or factors like whether
print reservations have been made or not. In certain instances, the number of remaining pictures
displayed on the viewfinder or the LCD monitor does not change even when you take pictures or
stored images are erased.
The actual file size varies according to the subject.
The maximum number of storable still pictures displayed on the monitor is 9999.
Record mode and file size/number of storable still pictures
Record
mode
Number of pixels
(PIXEL COUNT)
Compression
File
format
File size
(MB)
Number of
storable still
pictures (with 1GB
xD-Picture Card)
RAW
3648 x 2736
Loss-less
compression
ORF Approx. 11 91
Y
SF 1/2.7
JPEG
Approx. 6.8 147
Y
F 1/4 Approx. 4.7 211
Y
N 1/8 Approx. 2.2 460
Y
B 1/12 Approx. 1.5 687
X
SF
3200 x 2400
1/2.7 Approx. 5.3 187
X
F 1/4 Approx. 3.7 267
X
N 1/8 Approx. 1.7 597
X
B 1/12 Approx. 1.1 888
X
SF
2560 x 1920
1/2.7 Approx. 3.6 280
X
F 1/4 Approx. 2.2 466
X
N 1/8 Approx. 1.1 927
X
B 1/12 Approx. 0.7 1361
X
SF
1600 x 1200
1/2.7 Approx. 1.3 799
X
F 1/4 Approx. 0.8 1163
X
N 1/8 Approx. 0.5 2284
X
B 1/12 Approx. 0.3 3198
W
SF
1280 x 960
1/2.7 Approx. 0.8 1230
W
F 1/4 Approx. 0.5 1776
W
N 1/8 Approx. 0.3 3366
W
B 1/12 Approx. 0.2 4920
W
SF
1024 x 768
1/2.7 Approx. 0.5 1881
W
F 1/4 Approx. 0.4 2665
W
N 1/8 Approx. 0.2 4920
W
B 1/12 Approx. 0.1 7107
W
SF
640 x 480
1/2.7 Approx. 0.2 4569
W
F 1/4 Approx. 0.2 6396
W
N 1/8 Approx. 0.1 10661
W
B 1/12 Approx. 0.1 12793
E-450_MASTER.fm Seite 121 Donnerstag, 16. April 2009 10:40 10
Information
13
122
EN
*1 9
:
Can be registered. k: Cannot be registered.
*
Includes anti-shock.
Functions that can be registered in Custom Reset Settings
Function
Custom reset
setting
registration
Function
Custom reset
setting
registration
Shooting mode
k 8 9
F 9
SLEEP
9
<
/
Y
/
j
*
9
BACKLIT LCD
9
AF MODE
9
USB MODE
k
AF AREA
9
LIVE VIEW BOOST
9
AE BKT
9 g
FACE DETECT 9
PICTURE MODE
9
FRAME ASSIST
9
GRADATION
9
ISO-AUTO SET
9
K 9
ISO-AUTO
9
NOISE REDUCT.
9
AEL Metering
9
WB
9
BULB TIMER
9
> 9 w
+
F 9
METERING
9
AUTO POP UP
9
ISO
9
ALL
> k
NOISE FILTER
9
COLOR SPACE
9
Flash mode
9 K
SET
9
#
RC MODE
9
PIXEL COUNT
9
w 9
RAW+JPEG ERASE
9
AF ILLUMINAT.
9
FILE NAME
k
FOCUS RING
9
dpi SETTING
k
RESET LENS
k
CLEANING MODE
k
BULB FOCUSING
k X k
LIVE VIEW AF MODE
9
CF/xD
k
DIAL FUNCTION
9 s k
DIAL DIRECTION
9 W k
AEL/AFL
9
VIDEO OUT
k
AEL/AFL MEMO
9
REC VIEW
9
j
FUNCTION
9
PIXEL MAPPING
k
7
FUNCTION
9
FIRMWARE
k
E-450_MASTER.fm Seite 122 Donnerstag, 16. April 2009 10:40 10
Information
13
123
EN
Shooting Menu
Menu directory
Tab Function Setting
Ref.
page
CARD SETUP ALL ERASE/FORMAT
P. 8 2
P. 11 4
CUSTOM RESET
RESET
P. 3 0RESET1 SET/RESET
RESET2 SET/RESET
PICTURE MODE
h
VIVID/
i
NATURAL
*
/
j
MUTED/
Z
PORTRAIT/
MONOTONE
P. 6 3
GRADATION AUTO/NORMAL
*
/HIGH KEY/LOW KEY P. 64
K
RAW/
Y
F/
Y
N
*
/
X
N/
W
N/RAW+
Y
F/RAW+
Y
N/RAW+
X
N/
RAW+
W
N
P. 5 9
WB
AUTO
*
A –7 – +7, G –7 – +7
P. 6 0
5
5300K
A –7 – +7, G –7 – +7
2
7500K
A –7 – +7, G –7 – +7
3
6000K
A –7 – +7, G –7 – +7
1
3000K
A –7 – +7, G –7 – +7
w
4000K
A –7 – +7, G –7 – +7
x
4500K
A –7 – +7, G –7 – +7
y
6600K
A –7 – +7, G –7 – +7
n
5500K
A –7 – +7, G –7 – +7
V
A –7 – +7, G –7 – +7
CWB 2000K – 14000K
ISO AUTO
*
/100–1600 P. 50
NOISE REDUCT. OFF/ON/AUTO
*
P. 6 5
NOISE FILTER OFF/LOW/STANDARD
*
/HIGH P. 65
METERING
e
*
ESP + AF/ESP
*
P. 4 7
J
5
5
HI
5
SH
#
RC MODE OFF
*
/ON P. 71
w
–3.0 – 0.0
*
– +3.0 P. 69
AF MODE S-AF
*
/C-AF/MF/S-AF+MF/C-AF+MF P. 51
AF AREA AUTO
*
/
Q
/
R
/
S
P. 5 3
ANTI-SHOCK
z
OFF
*
/1SEC – 30SEC P. 58
AE BKT OFF
*
/3F 0.3EV/3F 0.7EV/3F 1.0EV P. 49
*
Factory default setting
E-450_MASTER.fm Seite 123 Donnerstag, 16. April 2009 10:40 10
Information
13
124
EN
Playback Menu
Custom Menu 1
Tab Function Setting
Ref.
page
q
m K
/
L
/
M
/
N
/
O
/
h
/
i
P. 7 7
y
OFF/ON
*
P. 7 7
EDIT
RAW DATA EDIT
P. 7 8
JPEG EDIT
SHADOW ADJ/REDEYE FIX/
P
/
BLACK & WHITE/SEPIA/SATURATION/
Q
<<
/
U
P. 9 1
COPY ALL YES/NO P. 80
RESET PROTECT YES/NO P. 81
*
Factory default setting
Tab Function Setting
Ref.
page
a
AF/MF P. 8 3
AF ILLUMINAT. OFF/ON
*
P. 8 3
FOCUS RING
b
*
/
c
P. 8 3
RESET LENS OFF/ON
*
P. 8 3
BULB FOCUSING OFF/ON
*
P. 8 3
LIVE VIEW AF MODE AF SENSOR/HYBRID AF/IMAGER AF
*
P. 3 7
b
BUTTON/DIAL P. 83
DIAL FUNCTION
P %
*
/
F
P. 8 3
A
FNo.
*
/
F
S
SHUTTER
*
/
F
M
SHUTTER
*
/FNo.
DIAL DIRECTION DIAL1
*
/DIAL2 P. 84
AEL/AFL
S-AF
*
mode1
*
/mode2/mode3
P. 8 4C-AF mode1/mode2
*
/mode3/mode4
MF mode1
*
/mode2/mode3
AEL/AFL MEMO OFF
*
/ON P. 85
7
FUNCTION
Fn FACE DETECT
*
/PREVIEW/OFF/
V
/
LIVE PREVIEW/TEST PICTURE
P. 8 5
j
FUNCTION
j
/
<
/
Y
*
/AF AREA/AF MODE/WB/METERING/ISO
P. 8 5
c
DISP/
8
/PC P. 8 6
8
OFF/ON
*
P. 8 6
SLEEP OFF/1 MIN
*
/3 MIN/5 MIN/10 MIN P. 86
BACKLIT LCD 8 SEC
*
/30 SEC/1 MIN/HOLD P. 86
USB MODE AUTO
*
/STORAGE/MTP/CONTROL/
<
EASY/
<
CUSTOM P. 86
LIVE VIEW BOOST OFF
*
/ON P. 87
g
FACE DETECT OFF
*
/ON
P. 3 9
P. 8 7
FRAME ASSIST OFF*/GRID/GOLDEN SECTION/SCALE P. 87
*
Factory default setting
E-450_MASTER.fm Seite 124 Donnerstag, 16. April 2009 10:40 10
Information
13
125
EN
Custom Menu 2
d
EXP/
e
/ISO P. 8 7
ISO-AUTO SET 100–1600 (400
*
)P.87
ISO-AUTO
P
/
A
/
S
*
/ALL P. 87
AEL Metering AUTO
*
/
J
/
5
/
5
HI/
5
SH P. 87
BULB TIMER
k
P. 8 7
e
#
CUSTOM P. 8 7
w
+
F
OFF
*
/ON P. 87
AUTO POP UP OFF/ON
*
P. 8 8
f
K
/COLOR/WB P. 88
ALL
>
ALL SET A –7 – +7 G –7 – +7
P. 8 8
ALL RESET YES/NO
COLOR SPACE sRGB
*
/AdobeRGB P. 88
K
SET
P
QY
/
X
/
W
SF/F/N/B P. 88
PIXEL COUNT
X
iddle
3200 x 2400/2560 x 1920
*
/
1600 x 1200
P. 8 8
W
mall 1280 x 960
*
/1024 x 768/640 x 480
g
RECORD/ERASE P. 89
RAW+JPEG ERASE JPEG/RAW/RAW+JPEG
*
P. 8 9
FILE NAME AUTO
*
/RESET P. 89
dpi SETTING AUTO
*
/CUSTOM P. 89
h
K
UTILITY P. 11 2
CLEANING MODE
k
P. 11 2
*
Factory default setting
Tab Function Setting
Ref.
page
X k
P. 1 5
CF/xD CF
*
/xD P. 90
s j
–7 – +7
k
–7 – +7 P. 90
W
*
1P.90
VIDEO OUT
*
1P.90
REC VIEW OFF/AUTO
q
/1SEC – 20SEC (5SEC
*
)P.90
PIXEL MAPPING
k
P. 112
FIRMWARE
k
P. 9 0
*
Factory default setting
*1
Settings differ depending on the region where the camera is purchased.
Tab Function Setting
Ref.
page
E-450_MASTER.fm Seite 125 Donnerstag, 16. April 2009 10:40 10
Information
13
126
EN
A
(Aperture Priority) Mode
You set the aperture yourself and the camera automatically varies the shutter speed so that the
picture is taken with the correct exposure.
AE (Automatic Exposure)
The camera’s built-in exposure meter automatically sets the exposure. The 3 AE modes
available on this camera are
P
mode, in which the camera selects both the aperture and
shutter speed,
A
mode, in which the user selects the aperture and the camera sets the shutter
speed, and
S
mode, in which the user selects the shutter speed and the camera sets the
aperture. In
M
mode, the user selects both the aperture and the shutter speed.
Aperture
The adjustable lens opening which controls the amount of light that enters the camera. The
larger the aperture, the shorter the depth of field and the fuzzier the background. The smaller
the aperture, the greater the depth of field and the sharper the background. Aperture is
measured in f/stops. Larger aperture values indicate smaller apertures, and smaller aperture
values indicate larger apertures.
AUTO mode
Program AE mode (see “
P
(Program) Mode”). In addition, this mode features automatic flash
pop up when shooting in low-light conditions.
Center weighted averaging metering
A light metering mode or technique that uses an average of the center and periphery of the
image area but is biased toward the information at the center of the image area. This method is
best used when the brightness of the center and periphery of the image area does not vary
greatly. See also digital ESP metering and spot metering.
Color space
A model that describes colors using more than three coordinates. Color spaces such as sRGB,
Adobe RGB are occasionally used for encoding/reproducing colors.
Color temperature
The spectral balance of different white light sources is rated numerically by color temperature
a concept of theoretical physics that, with incandescent lighting, corresponds roughly to the
absolute lamp filament temperature, expressed on the Kelvin (K) temperature scale. The higher
the color temperature, the richer the light in bluish tones and the poorer in reddish; the lower the
color temperature, the richer the light in reddish tones and the poorer in bluish. You may
encounter difficulties with color reproduction when shooting indoors under fluorescent lighting,
or where sunlight and fluorescent lighting are both present. Your camera is provided with a
white balance adjustment feature that you can use to compensate for the odd effects of
combinations of color you may occasionally see in your pictures.
Compression rate
Compression is a method of reducing file size by abbreviating some contents of data, and
compression rate denotes the amount of compression. The actual effect of the selected
compression rate could vary with the content of the image. The numbers for the compression
rate selected with this camera provide only a general scale for reference and are not precise
measurements.
DCF (Design rule for Camera File system)
A standard for image files by the Japan Electronics and Information Technology Industries
Association (JEITA).
Depth of Field
Depth of Field refers to the distance from the nearest to the furthest point of perceived “sharp”
focus in a picture.
Glossary
E-450_MASTER.fm Seite 126 Donnerstag, 16. April 2009 10:40 10
Information
13
127
EN
Digital ESP (Electro-Selective Pattern) Light Metering
This determines the exposure by splitting the image into 49 areas and metering and calculating
the light levels in each area.
DPOF (Digital Print Order Format)
This is for saving desired print settings on digital cameras. By entering which images to print
and the number of copies of each, the user can easily have the desired images printed by a
printer or print lab that supports the DPOF format.
Eclipsing (Vignetting)
This refers to when an object obscures part of the field of view so that the whole subject is not
photographed. Vignetting also refers to when the image seen through the viewfinder does not
exactly match the image shot through the objective lens, so the photographed image includes
objects not seen through the viewfinder. In addition, vignetting can occur when an incorrect lens
hood is used, causing shadowing to appear in the corners of the image.
EV (Exposure Value)
A system for measuring exposure. EV0 is when the aperture is at F1 and the shutter speed is
1 second. The EV then increases by 1 each time the aperture increases by one F stop or the
shutter speed increases by one increment. EV can also be used to indicate brightness and ISO
settings.
Exposure
The amount of light used to capture an image. The exposure is determined by the length of
time the shutter is open (shutter speed) and the amount of light that passes through the lens
(aperture).
Image pickup device
This converts light passing through the lens into electrical signals. On this camera, light is
picked up and converted into RGB signals to build a single image.
Imager contrast detection system
Focusing method based on the contrast of the image of the subject captured on the image
pickup device.
ISO
International abbreviation for International Organization for Standardization. The sensitivity
setting used in digital cameras is based on the same ISO standard used for film sensitivity. The
sensitivity is denoted as shown in “ISO 100”. Higher ISO values indicate greater sensitivity to
light, so images can be exposed even in low-light conditions.
JPEG (Joint Photographic Experts Group)
A compression format for color still images. Photographs (images) shot using this camera are
recorded onto the card in JPEG format when the Record mode is set to a setting other than
[RAW]
. By downloading these images to a personal computer, users can edit them using
graphics application software or view the images using an Internet web browser.
M
(Manual) Mode
The user sets both the aperture and shutter speed.
NTSC (National Television Systems Committee)/PAL (Phase Alternating Line)
Television formats. NTSC is mainly used in Japan, North America and Korea. PAL is mainly
used in Europe and China.
Number of pixels (PIXEL COUNT)
The number of dots (pixels) used to create an image denotes the image size. For instance, an
image in 640 x 480 pixel count is the same size as the computer screen if the monitor setting is
also 640 x 480. If the monitor setting is 1024 x 768, the image only takes up part of the screen.
P
(Program) Mode
Also called Program AE mode. The camera automatically sets the best shutter speed and
aperture for the shot.
E-450_MASTER.fm Seite 127 Donnerstag, 16. April 2009 10:40 10
Information
13
128
EN
PictBridge
A standard that enables digital cameras and printers made by different manufacturers to be
connected, and also allows pictures to be printed directly from the camera.
Pixels
A pixel is the smallest unit (dot) used to make up an image. Clear large-sized printed images
require millions of pixels.
RAW
Refers to raw data, data which has not been enhanced with a camera option like white balance,
sharpness, contrast, etc. This file format is for viewing and processing with our own software.
You may not be able to open or process these files with other graphics software applications,
and these files cannot be selected for DPOF printing. RAW files are assigned an orf file
extension (*.orf).
S
(Shutter Priority) Mode
Also called Shutter Priority AE mode. The user selects the shutter speed and the camera
automatically varies the aperture so that the picture is taken with the best exposure.
Single-lens reflex camera
A camera that uses a mirror to reflect the light entering from the shooting lens so the image can
be checked in the viewfinder. There is no difference between the composition to be captured
and the composition viewed on the viewfinder.
Sleep Mode
A mode designed to save battery life. The camera automatically enters the sleep mode if you
do not operate it for a certain time. To get out of the sleep mode, use any button on the camera
(shutter button, menu button, etc.).
Spot metering
The meter reading is taken from a very small area around the center of the subject, defined by
the spot metering area mark in the viewfinder. Spot metering is ideal for use in difficult light
conditions, or when the important element of the picture (subject’s face) is small. Use spot
metering for backlit subjects, or sports and stage performers. See also digital ESP metering
and center weighted averaging metering.
TFT (Thin-Film Transistor) Color Monitor
A color monitor constructed using thin-film technology.
TTL phase-contrast detection system
This is used to measure the distance to the subject. The camera determines if the image is
focused by the detected phase contrast.
TTL (Through-The-Lens) System
To help adjust exposure, a light receptor built into the camera directly measures the light
passing through the lens.
E-450_MASTER.fm Seite 128 Donnerstag, 16. April 2009 10:40 10
Information
13
129
EN
Product type
Product type : Single-lens reflex digital camera with interchangeable lens system
Lens : Zuiko Digital, Four Thirds System Lens
Lens mount : Four Thirds mount
Equivalent focal length on
a 35 mm film camera : Approx. twice the focal length of the lens
Image pickup device
Product type : 4/3" Live MOS sensor
No. of total pixels : Approx. 11,800,000 pixels
No. of effective pixels : Approx. 10,000,000 pixels
Screen size : 17.3 mm (H) x 13.0 mm (V) (0.7" x 0.5")
Aspect ratio : 1.33 (4:3)
Viewfinder
Product type : Eye-level single-lens reflex viewfinder
Field of view : Approx. 95% (for field of view on recorded images)
Viewfinder magnification : Approx. 0.92x (–1 m
–1
, 50 mm lens, infinity)
Eye point : Approx. 14 mm (0.6") from the cover glass (–1 m
–1
)
Diopter adjustment range : –3.0 – +1.0 m
–1
Optical path fraction : Quick return half mirror
Depth of field : When PREVIEW registered with the
b
button
Focusing screen : Fixed
Eyecup : Interchangeable
Live view
: Uses Live MOS sensor for shooting
: Field of view of 100%
LCD monitor
Product type : 2.7" TFT color LCD
Total no. of pixels : Approx. 230,000 dots
Shutter
Product type : Computerized focal-plane shutter
Shutter : 1/4000–60 sec., Bulb shooting
Auto focus
Product type : TTL phase-contrast detection system/Imager contrast detection
system
Focusing points : 3-point multiple AF (left, center, right)
11-point multiple AF: with
[IMAGER AF]
AF luminance range : EV 0 – EV 19 (ISO 100 equivalent, at room temperature 20 °C (68 °F),
TTL phase-contrast detection system)
Selection of focusing point : Auto, Optional
AF illuminator : The built-in flash provides light.
Exposure control
Metering system : TTL full-aperture metering system
(1) Digital ESP metering
(2) Center weighted averaging metering
(3) Spot metering (approx. 2% for the viewfinder screen)
Metering range : EV 1–20 (Digital ESP metering, Center weighted average metering,
Spot metering) (At room temperature, 50 mm f2, ISO 100)
Shooting modes : (1)
AUTO
:Fully automatic
(2)
P
: Program AE (Program shift can be performed)
(3)
A
: Aperture priority AE
(4)
S
: Shutter priority AE
(5)
M
: Manual
Specifications
Camera specifications
E-450_MASTER.fm Seite 129 Donnerstag, 16. April 2009 10:40 10
Information
13
130
EN
ISO sensitivity : 100–1600
Exposure compensation : ±5 EV (1/3 EV step)
White balance
Product type : Image pickup device
Mode setting : Auto, Preset WB (8 settings), Customized WB, One-touch WB
Recording
Memory : CF card (Compatible with Type I and II)
Microdrive (Compatible with FAT 16/32)
xD-Picture Card
Recording system : Digital recording, JPEG (in accordance with Design rule for Camera
File system [DCF]), RAW Data
Applicable standards : Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III,
PictBridge
Playback
Playback mode : Single-frame playback, Close-up playback, Index display, Image
rotation, Slideshow, Calendar display
Information display : Information display, Histogram display
Drive
Drive mode : Single-frame shooting, Sequential shooting, Self-timer, Remote control
Sequential shooting : 3.5 frames/sec. (Max. no. of storable sequential pictures: 8 frames in
RAW)
Self-timer : Operation time: 12 sec., 2 sec.
Optical remote control : Operation time: 2 sec., 0 sec. (instantaneous shooting)
(RM-1 Remote Control (optional))
Flash
Synchronization : Synchronized with the camera at 1/180 sec. or less
Flash control mode : TTL-AUTO (TTL pre-flash mode), AUTO, MANUAL
External flash attachment : Hot shoe
Wireless flash function : Compatible with the Olympus wireless RC flash system
External connector
USB connector, VIDEO OUT connector (Multi-connector)
Power supply
Battery : Li-ion Battery (BLS-1) x1
Dimensions/weight
Dimensions : 129.5 mm (W) x 91 mm (H) x 53 mm (D) (5.1" x 3.6" x 2.1")
(excluding protrusions)
Weight : Approx. 380 g (0.8 Ib.) (without battery)
Operating environment
Temperature : 0 °C – 40 °C (32 °F – 104 °F) (operation)/
–20 °C – 60 °C (–4 °F – 140 °F) (storage)
Humidity : 30 – 90% (operation)/10 – 90% (storage)
E-450_MASTER.fm Seite 130 Donnerstag, 16. April 2009 10:40 10
Information
13
131
EN
BLS-1 Lithium ion battery
MODEL NO. : PS-BLS1
Product type : Rechargeable Lithium ion battery
Nominal voltage : DC 7.2 V
Nominal capacity : 1150 mAh
No. of charge and
discharge times : Approx. 500 times (vary with usage conditions)
Ambient temperature : 0 °C – 40 °C (32 °F – 104 °F) (charging)
–10 °C – 60 °C (14 °F – 140 °F) (operation)
–20 °C – 35 °C (–4 °F – 95 °F) (storage)
Dimensions : Approx. 35.5 mm (W) x 55 mm (D) x 12.8 mm (H)
(1.4" x 2.2" x 0.5")
Weight : Approx. 46 g (0.1 Ib.)
BCS-1 Lithium ion charger
MODEL NO. : PS-BCS1
Rated input : U.S.A CANADA AC 120V (60 Hz)
Other countries AC 100 V – 240 V (50/60 Hz)
Rated output : DC 8.35 V. 400 mA
Charging time : Approx. 3 hours 30 minutes.
(room temperature: if using BLS-1)
Ambient temperature : 0 °C – 40 °C (32 °F – 104 °F) (operation)/
–20 °C – 60 °C (–4 °F – 140 °F) (storage)
Dimensions : Approx. 62 mm (W) x 83 mm (D) x 38 mm (H)
(2.4" x 3.3" x 1.5")
Weight : Approx. 72 g (0.2 Ib.) (without AC cable)
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR OBLIGATION ON
THE PART OF THE MANUFACTURER.
Battery/charger specifications
E-450_MASTER.fm Seite 131 Donnerstag, 16. April 2009 10:40 10
Information
132
EN
13
E-System Chart
Standard Lenses
Compatible with
EC-14/EC-20
Tele
Converter
Compatible with
EX-25*
Extension
Tube
only at
120 -2 00 m m
EC-14/EC-20
Tele
Converter
Compatible with
EX-25*
Extension
Tube
EC-14/EC-20
Tele
Converter
Compatible with
EX-25*
Extension
Tube
EC-14/EC-20
Tele
Converter
Compatible with
EX-25*
Extension
Tube
EC-14/EC-20
Tele
Converter
Drop-in Filter Set included
Top Pro Lenses Dust-/splashproof – Fixed maximum aperture
Compatible with
EX-25*
Extension
Tube
EC-14**/EC-20*
Tele
Converter
RF-11
Ring Flash
with FR-1
TF-22
Twin Flash
with FR-1
Compatible with
EX-25*
Extension
Tube
EC-14*/EC-20*
Tele
Converter
Compatible with
EX-25*
Extension
Tube
EC-14/EC-20
Tele
Converter
Compatible with
EC-14/EC-20**
Tele
Converter
TF-22
Twin
Flash
Compatible with
EX-25*
Extension
Tube
only at 108 mm
EC-14/EC-20**
Tele
Converter
TF-22
Twin Flash
14-28mm (equiv. to 35mm)
ZUIKO DIGITAL
ED 7-14 mm 1:4.0
Super Wide-angle Zoom Lens
Compatible with
EC-14/EC-20*
Tele
Converter
Compatible with
EX-25*
Extension
Tube
only at 120 mm
EC-14/EC-20*
Tele
Converter
Pro Lenses Dust-/splashproof
Top Pro Lenses
50mm (equiv. to 35mm)
ZUIKO DIGITAL
25 mm 1:2.8 Pancake
Fix Focal Lens
70mm (equiv. to 35mm)
ZUIKO DIGITAL
35 mm 1:3.5
Macro Lens
140-600mm (equiv. to 35mm)
ZUIKO DIGITAL
ED 70-300 mm 1:4.0-5.6
Super Telephoto Zoom Lens
22-44mm (equiv. to 35mm)
ZUIKO DIGITAL
11-22 mm 1:2.8-3.5
Wid-angle Zoom Lens
28-108mm (equiv. to 35mm)
ZUIKO DIGITAL
14-54 mm 1:2.8-3.5 II
Standard Zoom Lens
Compatible with
EX-25
Extension
Tube
EC-14/EC-20
Tele
Converter
RF-11
Ring Flash
with FR-1
TF-22
Twin Flash
with FR-1
100mm (equiv. to 35mm)
ZUIKO DIGITAL
ED 50 mm 1:2.0
Macro Lens
Compatible with
EC-14/EC-20*
Tele
Converter
16mm (equiv. to 35mm)
ZUIKO DIGITAL
ED 8 mm 1:3.5
Fisheye Lens
Compatible with
EX-25*
Extension
Tube
EC-14/EC-20**
Tele
Converter
TF-22
Twin Flash
100-400mm (equiv. to 35mm)
ZUIKO DIGITAL
ED 50-200 mm 1:2.8-3.5 SWD
Telephoto Zoom Lens
24-120mm (equiv. to 35mm)
ZUIKO DIGITAL
ED 12-60 mm 1:2.8-4.0 SWD
Standard Zoom Lens
70-200mm (equiv. to 35mm)
ZUIKO DIGITAL
ED 35-100 mm 1:2.0
Telephoto Zoom Lens
180-500mm (equiv. to 35mm)
ZUIKO DIGITAL
ED 90-250 mm 1:2.8
Telephoto Zoom Lens
300mm (equiv. to 35mm)
ZUIKO DIGITAL
ED 150 mm 1:2.0
Fix Focal Lens
600mm (equiv. to 35mm)
ZUIKO DIGITAL
ED 300 mm 1:2.8
Fix Focal Lens
28-70mm (equiv. to 35mm)
ZUIKO DIGITAL
ED 14-35 mm 1:2.0 SWD
Standard Zoom Lens
Compatible with
EX-25*
Extension
Tube
EC-14*/EC-20*
Tele
Converter
Standard Lenses Pro Lenses Dust-/splashproof
Compatible with
EX-25*
Extension
Tube
only at
50-84 mm
EC-14*/EC-20*
Tele
Converter
Compatible with
EX-25*
Extension
Tube
only at
56-90 mm
EC-14*/EC-20*
Tele
Converter
Compatible with
EX-25*
Extension
Tube
only at
100 -3 60 mm
EC-14*/EC-20*
Tele
Converter
28-84mm (equiv. to 35mm)
ZUIKO DIGITAL
ED 14-42 mm 1:3.5-5.6
Standard Zoom Lens
35-90mm (equiv. to 35mm)
ZUIKO DIGITAL 17.5-45 mm
1:3.5-5.6 Standard Zoom Lens
(only available in special kit)
36-360mm (equiv. to 35mm)
ZUIKO DIGITAL
ED 18- 180 mm 1:3.5-6.3
Super Zoom Lens (10x)
80-300mm (equiv. to 35mm)
ZUIKO DIGITAL
ED 40-150 mm 1:4.0-5.6
Telephoto Zoom Lens
Compatible with
EC-14*/EC-20*
Tele
Converter
18-36mm (equiv. to 35mm)
ZUIKO DIGITAL
ED 9-18 mm 1:4.0-5.6
Ultra Wide-angle Zoom Lens
E-450_Chart_EN_Master.indd 136E-450_Chart_EN_Master.indd 136 17.04.2009 11:56:39 Uhr17.04.2009 11:56:39 Uhr
133
EN
13
Adapters
ZUIKO DIGITAL
1.4x Tele Converter
EC-14
EX-25
Extension Tube
MF-1
OM-Adapter
ZUIKO DIGITAL
2.0x Tele Converter
EC-20
RM-1
Remote Control
RM-UC1
Remote Cable
Remote Control
VA-1
Varimagni
Angle Finder
Power Supply Shoulder Straps
E-420/E-450 Leather Cases
Eye Cups
E-System Bags
BCS-1
Li-Ion Battery
Charger
For ZUIKO DIGITAL ED 14 - 42 mm or ZUIKO DIGITAL ED 40 - 150 mm
CS-8B and CS-8LM
For ZUIKO DIGITAL ED 25 mm Pancake
CS-8B and CS-8LS
BLS-1
Li-Ion Battery Pack
(for E-450)
CSS-S101L
Black
CSS-S102L
White
CSS-S103L
Brown
CSS-S104L
Darkbrown
DE-P3
Eye Cup
Dioptric Adjustment +3
DE-N3
Eye Cup
Dioptric Adjustment –3
EP-5
Eye Cup
(Standard)
EP-7
Eye Cup
incl. with E-3
ME-1
Magnifyer
Eye Cup 1.2x
EP-6
Eye Cup
Specifications and appearances are subject to change without any notice or obligation on the part of the manufacturer.
*Only with MF **
AF possible when using center frame *** No release via FP-1
1
Up to two wireless flashes or one FL-20 or the TF-22 can be attached.
2
FL-50R, FL-36R or FL-20 can be attached.
E-400 Series Leather Case E-System Swing Bag
E-System Bag Compact II
E-System Shoulder Bag II E-System DZK Case II
Black
Black
Dark Brown
Dark Brown
White
White
Information
EP-8
Eye Cup
Flash System
FLRA-1
Flash Reflector
Adapter
(incl. with FL-50R)
FLST-1
Flash Stand
(incl. with FL-50R
and FL-36R)
FL-CB05
Flash Extension Cable
FL-20
Flash
FL-36R
Wireless Flash
FL-50R
Wireless Flash
FL-CB02
5-pin to hot shoe cable
FP-1***
Flash
Power Grip
(incl. FL-CB02)
for FL-50R
HV-1
High Voltage Pack
BN-1
Ni-MH Battery Pack
AC-2
AC Adapter
FLBA-1
Bounce Adapter
(incl. with FL-50R)
SRF-11
Ring Flash Set
(incl. FC-1 / RF-11)
SHV-1
Flash High Voltage Set
(
in cl. H V-1 / B N-1 / AC -2
)
STF-22
Twin Flash Set
(
incl. FC-1 / TF-22
)
FC-1
Macro Flash
Controller
RF-11
Ring Flash
FR-1
Flash Adapter Ring
for 35/50 mm Macro
TF-22
Twin Flash
FL-BKM03
1
Twin Flash Bracket
FL-BK04
2
Flash Bracket
E-System Tote Style Bag
E-System Lady Bag Green
E-450_Chart_EN_Master.indd 137E-450_Chart_EN_Master.indd 137 17.04.2009 11:56:48 Uhr17.04.2009 11:56:48 Uhr
Information
13
134
EN
Read All Instructions –
Before you use the product, read all operating instructions. Save all manuals
and documentation for future reference.
Cleaning –
Always unplug this product from the wall outlet before cleaning. Use only a damp cloth for
cleaning. Never use any type of liquid or aerosol cleaner, or any type of organic solvent to clean this
product.
Attachments –
For your safety, and to avoid damaging the product, use only accessories
recommended by Olympus.
Water and Moisture –
For precautions on products with weatherproof designs, read the
weatherproofing sections.
Location –
To avoid damage to the product, mount the product securely on a stable tripod, stand, or
bracket.
Power Source –
Connect this product only to the power source described on the product label.
Foreign Objects –
To avoid personal injury, never insert a metal object into the product.
Heat –
Never use or store this product near any heat source such as a radiator, heat register, stove, or
any type of equipment or appliance that generates heat, including stereo amplifiers.
SAFETY PRECAUTIONS
General Precautions
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL.
An exclamation mark enclosed in a triangle alerts you to important operating
and maintenance instructions in the documentation provided with the product.
DANGER If the product is used without observing the information given under this
symbol, serious injury or death may result.
WARNING If the product is used without observing the information given under this
symbol, injury or death may result.
CAUTION If the product is used without observing the information given under this
symbol, minor personal injury, damage to the equipment, or loss of valuable
data may result.
WARNING!
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER DISASSEMBLE, EXPOSE
THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
E-450_MASTER.fm Seite 134 Donnerstag, 16. April 2009 10:40 10
Information
13
135
EN
WARNING
(
Do not use the camera near flammable or explosive gases.
(
Do not use the flash and LED on people (infants, small children, etc.) at close range.
You must be at least 1 m (3 ft.) away from the faces of your subjects. Firing the flash too close to the
subject’s eyes could cause a momentary loss of vision.
(
Keep young children and infants away from the camera.
Always use and store the camera out of the reach of young children and infants to prevent the following
dangerous situations which could cause serious injury:
Becoming entangled in the camera strap, causing strangulation.
Accidentally swallowing the battery, cards or other small parts.
Accidentally firing the flash into their own eyes or those of another child.
Accidentally being injured by the moving parts of the camera.
(
Do not look at the sun or strong lights with the camera.
(
Do not use or store the camera in dusty or humid places.
(
Do not cover the flash with a hand while firing.
CAUTION
(
Stop using the camera immediately if you notice any unusual odors, noise, or smoke around it.
Never remove the batteries with bare hands, which may cause a fire or burn your hands.
(
Never hold or operate the camera with wet hands.
(
Do not leave the camera in places where it may be subject to extremely high temperatures.
Doing so may cause parts to deteriorate and, in some circumstances, cause the camera to catch fire. Do
not use the charger if it is covered (such as a blanket). This could cause overheating, resulting in fire.
(
Handle the camera with care to avoid getting a low-temperature burn.
When the camera contains metal parts, overheating can result in a low-temperature burn. Pay attention to
the following:
When used for a long period, the camera will get hot. If you hold on to the camera in this state, a low-
temperature burn may be caused.
In places subject to extremely cold temperatures, the temperature of the camera’s body may be lower
than the environmental temperature. If possible, wear gloves when handling the camera in cold
temperatures.
(
Be careful with the strap.
Be careful with the strap when you carry the camera. It could easily catch on stray objects – and cause
serious damage.
DANGER
The camera uses a lithium ion battery specified by Olympus. Charge the battery with the specified charger. Do
not use any other chargers.
Never heat or incinerate batteries.
Take precautions when carrying or storing batteries to prevent them from coming into contact with any metal
objects such as jewelry, pins, fasteners, etc.
Never store batteries where they will be exposed to direct sunlight, or subjected to high temperatures in a hot
vehicle, near a heat source, etc.
To prevent causing battery leaks or damaging their terminals, carefully follow all instructions regarding the use
of batteries. Never attempt to disassemble a battery or modify it in any way, by soldering, etc.
If battery fluid gets into your eyes, flush your eyes immediately with clear, cold running water and seek medical
attention immediately.
Always store batteries out of the reach of small children. If a child accidentally swallows a battery, seek medical
attention immediately.
Product Handling Precautions
Battery Handling Precautions
Follow these important guidelines to prevent batteries from leaking, overheating, burning,
exploding, or causing electrical shocks or burns.
E-450_MASTER.fm Seite 135 Donnerstag, 16. April 2009 10:40 10
Information
13
136
EN
WARNING
Keep batteries dry at all times.
To prevent batteries from leaking, overheating, or causing a fire or explosion, use only batteries recommended
for use with this product.
Insert the battery carefully as described in the operating instructions.
If rechargeable batteries have not been recharged within the specified time, stop charging them and do not
use them.
Do not use a battery if it is cracked or broken.
If a battery leaks, becomes discolored or deformed, or becomes abnormal in any other way during operation,
stop using the camera.
If a battery leaks fluid onto your clothing or skin, remove the clothing and flush the affected area with clean,
running cold water immediately. If the fluid burns your skin, seek medical attention immediately.
Never subject batteries to strong shocks or continuous vibration.
CAUTION
Before loading, always inspect the battery carefully for leaks, discoloration, warping, or any other abnormality.
The battery may become hot during prolonged use. To avoid minor burns, do not remove it immediately after
using the camera.
Always unload the battery from the camera before storing the camera for a long period.
This camera uses a lithium ion battery specified by Olympus. Do not use any other type of battery. For safe
and proper use, read the battery’s instruction manual carefully before using it.
If the battery’s terminals get wet or greasy, camera contact failure may result. Wipe the battery well with a dry
cloth before use.
Always charge a battery when using it for the first time, or if it has not been used for a long period.
When operating the camera with battery power at low temperatures, try to keep the camera and spare battery
as warm as possible. A battery that has run down at low temperatures may be restored after it is warmed at
room temperature.
The number of pictures you can take may vary depending on the shooting conditions or battery.
Before going on a long trip, and especially before traveling abroad, purchase extra batteries.
A recommended battery may be difficult to obtain while traveling.
Please recycle batteries to help save our planet’s resources. When you throw away dead batteries, be sure to
cover their terminals and always observe local laws and regulations.
To protect the high-precision technology contained in this product, never leave the camera in the places listed
below, no matter if in use or storage:
Places where temperatures and/or humidity are high or go through extreme changes. Direct sunlight,
beaches, locked cars, or near other heat sources (stove, radiator, etc.) or humidifiers.
In sandy or dusty environments.
Near flammable items or explosives.
In wet places, such as bathrooms or in the rain. When using products with weatherproof designs, read their
manuals as well.
In places prone to strong vibrations.
Never drop the camera or subject it to severe shocks or vibrations.
When mounted on a tripod, adjust the position of the camera with the tripod head. Do not twist the camera.
Do not leave the camera pointed directly at the sun. This may cause lens or shutter curtain damage, color
failure, ghosting on the image pickup device, or may possibly cause fires.
Do not touch electric contacts on cameras and interchangeable lenses. Remember to attach the body cap
when removing the lens.
Before storing the camera for a long period, remove the battery. Select a cool, dry location for storage to
prevent condensation or mold from forming inside the camera. After storage, test the camera by turning it on
and pressing the shutter release button to make sure that it is operating normally.
Always observe the operating environment restrictions described in the camera’s manual.
Caution for Usage Environment
E-450_MASTER.fm Seite 136 Donnerstag, 16. April 2009 10:40 10
Information
13
137
EN
Do not push the monitor forcibly; otherwise the image may become vague, resulting in a playback mode failure
or damage to the monitor.
A strip of light may appear on the top/bottom of the monitor, but this is not a malfunction.
When a subject is viewed diagonally in the camera, the edges may appear zigzagged on the monitor. This is
not a malfunction; it will be less noticeable in playback mode.
In places subject to low temperatures, the LCD monitor may take a long time to turn on or its color may change
temporarily. When using the camera in extremely cold places, it is a good idea to occasionally place it in a warm
place. An LCD monitor exhibiting poor performance due to low temperatures will recover in normal
temperatures.
The LCD used for the monitor is made with high-precision technology. However, black spots or bright spots of
light may appear constantly on the LCD Monitor. Due to its characteristics or the angle at which you are viewing
the monitor, the spot may not be uniform in color and brightness. This is not a malfunction.
Do not immerse in water or splash with water.
Do not drop or exert strong force on the lens.
Do not hold at the moving part of the lens.
Do not touch the lens surface directly.
Do not touch the contact points directly.
Do not subject to abrupt temperature changes.
The operating temperature range is –10 °C – 40 °C (14 °F – 104 °F). Always use within this temperature range.
Olympus makes no representations or warranties regarding any damages, or benefit expected by using this
unit lawfully, or any request from a third person, which are caused by the inappropriate use of this product.
Olympus makes no representations or warranties regarding any damages or any benefit expected by using
this unit lawfully which are caused by erasing picture data.
Olympus makes no representations or warranties, either expressed or implied, by or concerning any content
of these written materials or software, and in no event shall be liable for any implied warranty of merchantability
or fitness for any particular purpose or for any consequential, incidental or indirect damages (including but not
limited to damages for loss of business profits, business interruption and loss of business information) arising
from the use or inability to use these written materials or software or equipment. Some countries do not allow
the exclusion or limitation of liability for consequential or incidental damages, so the above limitations may not
apply to you.
Olympus reserves all rights to this manual.
Unauthorized photographing or use of copyrighted material may violate applicable copyright laws.
Olympus assumes no responsibility for unauthorized photographing, use or other acts that infringe upon
the rights of copyright owners.
All rights reserved. No part of these written materials or this software may be reproduced or used in any
form or by any means, electronic or mechanical, including photocopying and recording or the use of any
type of information storage and retrieval system, without the prior written permission of Olympus. No
liability is assumed with respect to the use of the information contained in these written materials or
software, or for damages resulting from the use of the information contained therein. Olympus reserves
the right to alter the features and contents of this publication or software without obligation or advance
notice.
LCD Monitor
Lens
Legal and Other Notices
Disclaimer of Warranty
Warning
Copyright Notice
E-450_MASTER.fm Seite 137 Donnerstag, 16. April 2009 10:40 10
Information
13
138
EN
Radio and Television Interference
Changes or modifications not expressly approved by the manufacturer may void the user’s authority to operate
this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Adjust or relocate the receiving antenna.
Increase the distance between the camera and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult your dealer or an experienced radio/TV technician for help. Only the OLYMPUS-supplied USB cable
should be used to connect the camera to USB enabled personal computers (PC).
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate
it.
We strongly recommend that you use only the genuine Olympus dedicated rechargeable
battery and battery charger with this camera.
Using a non-genuine rechargeable battery and/or battery charger may result in fire or personal
injury due to leakage, heating, ignition or damage to the battery. Olympus does not assume any
liability for accidents or damage that may result from the use of a battery and/or battery charger
that are not genuine Olympus accessories.
FCC Notice
Use Only Dedicated Rechargeable Battery and Battery Charger
For customers in North and South America
For customers in USA
Declaration of Conformity
Model Number : E-450
Trade Name : OLYMPUS
Responsible Party :
Address : 3500 Corporate Parkway, P.O. Box 610, Center Valley,
PA 18034-0610, USA
Telephone Number: 484-896-5000
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
For customers in Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
E-450_MASTER.fm Seite 138 Donnerstag, 16. April 2009 10:40 10
Information
13
139
EN
Provisions of warranty
1.
If this product proves to be defective, although it has been used properly (in accordance with the written
Handling Care and Operating instructions supplied with it), during a period of two years from the date of
purchase from an authorized Olympus distributor within the business area of Olympus Imaging Europa
GmbH as stipulated on the website: http://www.olympus.com this product will be repaired, or at Olympus’s
option replaced, free of charge. To claim under this warranty the customer must take the product and this
Warranty Certificate before the end of the two year warranty period to the dealer where the product was
purchased or any other Olympus service station within the business area of Olympus Imaging Europa GmbH
as stipulated on the website: http://www.olympus.com. During the one year period of the World Wide
Warranty the customer may turn the product in at any Olympus service station. Please notice that not in all
countries such Olympus service station exists.
2.
The customer shall transport the product to the dealer or Olympus authorized service station at his own risk
and shall be responsible for any costs incurred in transporting the product.
3.
This warranty does not cover the following and the customer will be required to pay repair charge, even for
defects occurring within the warranty period referred to above.
(a)
Any defect that occurs due to mishandling (such as an operation performed that is not mentioned in the
Handling Care or other sections of the instructions, etc.)
(b)
Any defect that occurs due to repair, modification, cleaning, etc. performed by anyone other than
Olympus or an Olympus authorized service station.
(c)
Any defect or damage that occurs due to transport, a fall, shock, etc. after purchase of the product.
(d)
Any defect or damage that occurs due to fire, earthquake, flood damage, thunderbolt, other natural
disasters, environmental pollution and irregular voltage sources.
(e)
Any defect that occurs due to careless or improper storage (such as keeping the product under conditions
of high temperature and humidity, near insect repellents such as naphthalene or harmful drugs, etc.),
improper maintenance, etc.
(f)
Any defect that occurs due to exhausted batteries, etc.
(g)
Any defect that occurs due to sand, mud, etc. entering the inside of the product casing.
(h)
When this Warranty Certificate is not returned with the product.
(i)
When any alterations whatsoever are made to the Warranty Certificate regarding the year, month and
date of purchase, the customer’s name, the dealer’s name, and the serial number.
(j)
When proof of purchase is not presented with this Warranty Certificate.
4.
This Warranty applies to the product only; the Warranty does not apply to any other accessory equipment,
such as the case, strap, lens cap and batteries.
5.
Olympus’s sole liability under this warranty shall be limited to repairing or replacing the product. Any liability
for indirect or consequential loss or damage of any kind incurred or suffered by the customer due to a defect
of the product, and in particular any loss or damage caused to any lenses, films, other equipment or
accessories used with the product or for any loss resulting from a delay in repair or loss of data, is excluded.
Compelling regulations by law remain unaffected by this.
For customers in Europe
“CE” mark indicates that this product complies with the European requirements for safety,
health, environment and customer protection. “CE” mark cameras are intended for sales in
Europe.
This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of
waste electrical and electronic equipment in the EU countries.
Please do not throw the equipment into the domestic refuse.
Please use the return and collection systems available in your country for the disposal of this
product.
E-450_MASTER.fm Seite 139 Donnerstag, 16. April 2009 10:40 10
Information
13
140
EN
Notes regarding warranty maintenance
1.
This warranty will only be valid if the Warranty Certificate is duly completed by Olympus or an authorized
dealer or other documents contain sufficient proof. Therefore, please make sure that your name, the name
of the dealer, the serial number and the year, month and date of purchase are all completed or the original
invoice or the sales receipt (indicating the dealer’s name, the date of purchase and product type) is attached
to this Warranty Certificate. Olympus reserves the right to refuse free-of-charge service if neither Warranty
Certificate is completed nor the above document is attached or if the information contained in it is incomplete
or illegible.
2.
Since this Warranty Certificate will not be re-issued, keep it in a safe place.
Please refer to the list on the web site: http://www.olympus.com for the authorized international Olympus
service network.
IBM is a registered trademark of International Business Machines Corporation.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
Macintosh is a trademark of Apple Inc.
xD-Picture Card™ is a trademark.
“Shadow Adjustment Technology” function contains patented technologies from Apical Limited.
All other company and product names are registered trademarks and/or trademarks of their respective owners.
The standards for camera file systems referred to in this manual are the “Design Rule for Camera File System/
DCF” standards stipulated by the Japan Electronics and Information Technology Industries Association
(JEITA).
Trademarks
E-450_MASTER.fm Seite 140 Donnerstag, 16. April 2009 10:40 10
141
EN
Symbols
w
+
F
............................................................ 87
8
(Beep sound) ............................................ 86
W
(Language selection) ............................ 90
<
CUSTOM ................................................... 86
Y
Custom Menu 1 ........................................ 124
Z
Custom Menu 2 ........................................ 125
<
EASY ......................................................... 86
7
FUNCTION ................................................ 85
j
FUNCTION .............................................. 85
j
/
<
/
Y
.......................................................... 85
q
Playback Menu ....................................... 124
#
RC mode .................................................... 71
K
SET .......................................................... 88
W
Shooting Menu 1 ...................................... 123
X
Shooting Menu 2 ...................................... 123
a
AF/MF ........................................................ 83
b
BUTTON/DIAL ........................................... 83
c
DISP/
8
/PC .............................................. 86
d
EXP/
e
/ISO ............................................. 87
e
#
CUSTOM ............................................... 87
f
K
/COLOR/WB ........................................ 88
g
RECORD/ERASE ...................................... 89
h K
UTILITY .............................................112
h
VIVID ......................................................... 63
i
NATURAL .................................................. 63
j
MUTED ...................................................... 63
Z
PORTRAIT ................................................. 63
A
Adobe RGB .................................................... 88
AE BKT ........................................................... 49
AE bracketing ................................................. 49
AE lock ........................................................... 49
AEL/AFL ......................................................... 84
AEL/AFL MEMO ............................................. 85
AEL Metering .................................................. 87
AF AREA .................................................. 53, 85
AF ILLUMINAT. ............................................... 83
AF MODE ................................................. 51, 85
AF SENSOR ................................................... 37
AF target ......................................................... 53
ALL
>
........................................................ 88
ALL ERASE .................................................... 82
ANTI-SHOCK
z
........................................... 58
Aperture priority shooting
A
........................... 43
Aperture value ................................................ 43
Art filter mode
X
............................................ 5
Art filter/Scene
g
..................................... 4
Auto flash AUTO ............................................. 66
Auto focus ............................................... 54, 104
AUTO POP UP ................................................88
AUTO shooting
AUTO
......................................4
Auto white balance ....................................60, 61
B
B (Basic) ..................................................59, 107
B&W FILTER ...................................................64
BACKLIT LCD .................................................86
Battery ..................................................... 11, 114
BEACH&SNOW
g
..........................................5
BLACK & WHITE .............................................79
BULB FOCUSING ...........................................83
Bulb shooting .............................................46, 58
BULB TIMER ...................................................87
C
C-AF (continuous AF) ......................................52
C-AF+MF .........................................................53
Calendar display ..............................................75
CANDLE
&
......................................................5
CARD SETUP .........................................82, 114
Cards .......................................................13, 113
Center weighted averaging metering
J
........47
CF/xD ..............................................................90
CHILDREN
G
...................................................5
CLEANING MODE ........................................112
Close-up playback
U
......................................74
COLOR SPACE ...............................................88
Color temperature .........................................120
CompactFlash .........................................13, 113
Comparison screen .........................................41
Compression rate ............................................59
Continuous AF (C-AF) .....................................52
CONTRAST .....................................................64
CONTROL .......................................................86
COPY ALL .......................................................80
Custom printing ...............................................95
CUSTOM RESET ............................................30
Custom white balance CWB ............................61
D
Date/time setting
X
......................................15
DIAL DIRECTION ............................................84
DIAL FUNCTION .............................................83
Digital ESP metering
e
................................47
Diopter adjustment ..........................................14
Direct buttons ..................................................27
Direct print .......................................................93
DIS MODE
q
..................................................5
DOCUMENTS
@
..............................................5
Index
E-450_MASTER.fm Seite 141 Donnerstag, 16. April 2009 10:40 10
142
EN
dpi SETTING .................................................. 89
DPOF .............................................................. 91
Dust reduction .........................................14, 112
E
Easy printing ................................................... 94
Easy shooting modes ....................................... 4
Enlarged display ............................................. 41
Exposure compensation
F
............................ 48
Eyepiece cover ......................................... 10, 56
E-System Chart ............................................. 132
F
F (Fine) ................................................... 59, 107
FACE DETECT
g
................................... 39, 87
FILE NAME ..................................................... 89
Fill-in flash
#
.................................................. 67
FIREWORKS
(
.............................................. 5
FIRMWARE .................................................... 90
Flash intensity control
w
............................... 69
Flash mode
#
................................................ 66
Flash off
$
.................................................... 67
Fn FACE DETECT .................................... 39, 85
Focus lock ...................................................... 54
FOCUS RING ................................................. 83
FORMAT ........................................................114
Four Thirds system lenses ............................115
FRAME ASSIST ............................................. 87
G
GRADATION ................................................... 64
H
HIGH KEY
H
.............................................. 5, 64
Histogram ......................................... 40, 76, 108
HYBRID AF
o
............................................. 37
I
IMAGER AF
p
............................................ 37
Index display
G
............................................ 75
Information display ................................... 40, 76
ISO ........................................................... 50, 85
ISO-AUTO ...................................................... 87
ISO-AUTO SET .............................................. 87
J
JPEG EDIT ..................................................... 78
L
Y
(Large) ................................................ 59, 107
LANDSCAPE
L
.............................................. 5
LANDSCAPE+PORTRAIT
K
............................5
Lens .........................................................12, 115
Lithium ion battery ................................... 11, 114
Lithium ion charger .................................. 11, 114
LIVE PREVIEW .........................................46, 85
Live view ..........................................................36
LIVE VIEW AF MODE .....................................37
LIVE VIEW BOOST .........................................87
LOW KEY
I
................................................5, 64
M
X
(Middle) ...............................................59, 107
MACRO
J
........................................................5
Manual flash ....................................................67
Manual focus (MF) ....................................40, 52
Manual shooting
M
.........................................45
Menu ...............................................................29
METERING ...............................................47, 85
MF (manual focus) ..........................................52
Microdrive ................................................13, 113
Monitor adjustment
s
...................................90
MONOTONE ...................................................63
MTP .........................................................86, 102
N
N (Normal) ...............................................59, 107
NATURE MACRO
r
.......................................5
NIGHT SCENE
G
...........................................5
NIGHT+PORTRAIT
U
....................................5
NOISE FILTER ................................................65
NOISE REDUCT. .............................................65
NTSC ...............................................................90
Number of pixels .............................................59
O
OLYMPUS Master ...........................................97
Olympus wireless RC flash system .................71
One-touch white balance
V
.............61, 63, 85
P
PAL ..................................................................90
PANORAMA
s
..........................................5, 42
PICT. TONE .....................................................64
PictBridge ........................................................93
PICTURE MODE .............................................63
PIN HOLE
l
....................................................5
Pixel count .................................................59, 88
PIXEL MAPPING ...........................................112
POP ART
j
.....................................................5
PORTRAIT
I
...................................................5
Preset white balance .................................60, 61
Preview ......................................................46, 85
Print mode
<
..................................................95
E-450_MASTER.fm Seite 142 Donnerstag, 16. April 2009 10:40 10
143
EN
Print reservation ............................................. 91
Program shift
%
............................................ 43
Program shooting
P
....................................... 43
Protecting
0
................................................ 81
R
RAW ............................................................... 59
RAW DATA EDIT ............................................ 78
RAW+JPEG ERASE ....................................... 89
REC VIEW ...................................................... 90
Record mode
K
.............................. 59, 60, 121
REDEYE FIX .................................................. 79
Red-eye reduction flash
!
.......................... 66
Remote control
<
............................................ 57
RESET LENS ................................................. 83
RESET PROTECT ......................................... 81
Resizing
Q
................................................... 79
Rotating images
y
......................................... 77
S
W
(Small) ................................................ 59, 107
S-AF (single AF) ............................................. 51
S-AF+MF ........................................................ 52
SATURATION ........................................... 64, 79
Scene mode
Y
.............................................. 5
Self-timer
Y
................................................... 56
SEPIA ............................................................. 79
Sequential shooting
j
................................. 55
SF (Super Fine) ...................................... 59, 107
SHADOW ADJ ................................................ 79
SHARPNESS ................................................. 64
Shutter priority shooting
S
.............................. 44
Shutter speed ................................................. 43
Single AF (S-AF) ............................................ 51
Single-frame copy ........................................... 80
Single-frame erase
S
..................................... 82
Single-frame playback .................................... 74
Single-frame protect ....................................... 81
Single-frame shooting
o
.............................. 55
SLEEP ............................................................ 86
Slideshow
m
................................................. 77
Slow synchronization
#
SLOW ....................... 66
Slow synchronization
#
SLOW2/2nd
CURTAIN ..................................................... 66
SOFT FOCUS
k
.............................................. 5
SPORT
J
........................................................ 5
Spot metering – highlight control
5
HI
.......... 47
Spot metering – shadow control
5
SH
.......... 47
Spot metering
5
........................................... 47
sRGB .............................................................. 88
STORAGE ................................................ 86, 98
Strap ............................................................... 10
SUNSET
*
..................................................... 5
Super control panel .................................... 7, 28
Super FP flash ................................................ 71
T
TEST PICTURE ..............................................85
Trimming
P
...................................................79
U
USB MODE .....................................................86
V
VIDEO OUT .....................................................90
Viewfinder ..............................................6, 14, 16
W
WB .............................................................61, 85
WB compensation ...........................................62
White balance
WB
..........................................60
X
xD-Picture Card .......................................13, 113
Z
ZUIKO DIGITAL interchangeable lens ..........115
E-450_MASTER.fm Seite 143 Donnerstag, 16. April 2009 10:40 10
144
EN
Memo
E-450_MASTER.fm Seite 144 Donnerstag, 16. April 2009 10:40 10
145
EN
Memo
E-450_MASTER.fm Seite 145 Donnerstag, 16. April 2009 10:40 10
146
EN
Memo
E-450_MASTER.fm Seite 146 Donnerstag, 16. April 2009 10:40 10
147
EN
Memo
E-450_MASTER.fm Seite 147 Donnerstag, 16. April 2009 10:40 10
28

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Olympus-e-450
  • hoe zet je je camera dat je op sport kunt trekken? Gesteld op 18-7-2020 om 10:23

    Reageer op deze vraag Misbruik melden
  • Ik heb een card error op een cf voor olympus e-450. Een nieuwe kaart geeft na enkele opnamen ook een error. Foto's die ik nu nog maak zijn op de kaart niet meer leesbaar.
    Kan ik de kaarten opnieuw formatteren? Gesteld op 14-5-2014 om 20:12

    Reageer op deze vraag Misbruik melden
  • Excuseer mij, maar ik heb nog 1 brandende vraag, is het mogelijk analoge 3/4 Olympus lenzen te gebruiken (met adapter, die heb ik reeds), uiteraard op de E-450, of kan ik dit vergeten? Zeer bedankt voor een antwoord(-en), Mark Gesteld op 3-3-2014 om 16:47

    Reageer op deze vraag Misbruik melden
    • Voor technische ondersteuning adviseren wij u contact op te nemen met Olympus:

      email ; consumer-nl@olympus.nl
      tel: 071 - 582 18 88
      www.olympus.nl
      Geantwoord op 18-3-2014 om 15:56

      Waardeer dit antwoord Misbruik melden
  • heeft er iemand van jullie ook problemen met de flits. Deze blijft maar flitsen en zodoende haast geen scherpstelling Gesteld op 17-10-2011 om 17:57

    Reageer op deze vraag Misbruik melden
    • Hier ook hetzelfde probleem.
      Ik heb hem nu meer dan 1 jaar en ik kom er maar niet uit wat het zou kunnen zijn.
      Heb al verschillende instellingen geprobeerd maar helaas.
      Hierdoor al vele leuke kiekjes misgelopen bah.

      Hoop snel de oplossing te vinden.

      Groet,\
      D Geantwoord op 11-12-2011 om 14:24

      Waardeer dit antwoord (2) Misbruik melden
  • Beste,

    Ik heb ook de E-450 (schitterend toestel trouwens). Als je live-view gebruikt, probeert hij scherp te stellen zonder flitser, maar zodra je door de zoeker gaat kijken, gaat de camera de flitser gebruiken om zichzelf scherp te stellen. Het is nu eenmaal zo ingebouwd door de fabrikant.
    Ik heb mezelf dit ook heel lang afgevraagd.

    Dit probleem is van de baan als je een externe flitser gebruikt met lichtmeting of je een lampje bijhebt om op het voorwerp te schijnen (maar dit is niet in alle gevallen handig he :p)

    Met vriendelijke groeten,

    Xavier Weekers

    Geantwoord op 7-1-2013 om 08:10

    Waardeer dit antwoord Misbruik melden
  • je die flitsen die komen door of dat het te donker of te licht is en door die flitsen kan die zien wat de afstand is dan kan je volgens mij uitzetten bij RC-modus
    (ik weet het niet zeker) Geantwoord op 10-2-2018 om 08:48

    Waardeer dit antwoord (1) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Olympus e 450 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Olympus e 450 in de taal/talen: Engels als bijlage per email.

De handleiding is 10,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Olympus e 450

Olympus e 450 Gebruiksaanwijzing - Nederlands - 147 pagina's

Olympus e 450 Gebruiksaanwijzing - Deutsch - 147 pagina's

Olympus e 450 Gebruiksaanwijzing - Français - 147 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info