2.7
Basic operation
Redialling
Automatically fax redialling
If your fax call fails, your machine automatically redials it. In this Auto Redial
mode, your fax automatically redials the number up to two times at one minute inter-
vals.
Note: You can change the redial time and interval settings. (See “Changing redial
settings,” page 4.5.)
While in the Auto Redial mode, the machine can continue to receive faxes and can
make as many as 99 fax transmissions.
Note: If you used either the soft key that is assigned
MONITOR
/
CALL
or a attached
telephone to dial the call, you must redial manually (see below).
Note: If the last redial attempt fails, your machine may print (and/or display)
error messages.
Redialling manually
You can always redial calls manually. And you must redial manually if you used
either the soft key that is assigned
MONITOR
/
CALL
or the attached telephone to dial
the failed call.
Note: If you had dialed using the numeric keypad of the attached telephone, you
cannot redial. You can redial if you had dialed using the numeric keypad on
the control panel.
To redial a fax call manually without using the soft key that is assigned
MONITOR
/
CALL
key or the attached telephone:
1
Set the document and set the resolution and contrast.
2
Press
REDIAL
/
PAUSE
. The
LCD
will show:
3
Your machine can remember the last 10 dial numbers. Press or until the
dial number you want to redial appears.
4
Press
START
.
To redial a fax call manually with the soft key that is assigned
MONITOR
/
CALL
or the attached telephone:
1
Make sure the document is in the
ADF
and that the resolution and contrast
are set.
2
Press
MONITOR
/
CALL
or lift the attached telephone to get a dial tone.
3
Press
REDIAL
/
PAUSE
. The
LCD
will show:
4
Your machine can remember the last 10 dial numbers. Press or until the
dial number you want to redial appears.
5
When you hear fax tones from the remote unit, press
START
.
Note: If a person answers the phone, use the attached telephone to tell that
person you’re sending a fax. When you hear fax tones, press
START
.
To redial a voice call manually using the attached telephone:
1
Lift the attached telephone to get a dial tone.
2
Press
REDIAL
/
PAUSE
. The
LCD
will show:
3
Your machine can memory the latest 10 dial numbers. Press or until the
dial number you want to redial appears.
4
Press
START
.
When the other person answers, use the attached telephone to speak to that
person.
View Redial History
0:1234567890
View Redial History
0:1234567890
View Redial History
0:1234567890
