812264
80
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
Operating manual
for the user
LEVANA 2.0 6 kW
LEVANA 2.0 8 kW
LEVANA AQUA 2.0
ARINA 2.0
INARA 2.0
EN
“SETTINGS” display
convection
frost protection
night set
max. power
n.c.
5
Fig. 3.17 Touch control panel – General settings
08:00
OKESC
convection
frost protection
night set
max. power
n.c.
7 °C
5
Fig. 3.18 Touch control panel – Adjust value with arrow buttons
General settings:
By tapping the input eld on the right, the control panel appears
below. The value can be adjusted using the arrow buttons, and then
conrmed with OK. The process can be cancelled with ESC.
Convection
Pellet replace with a nominal heat output of 6 kW:
The convection air blower is an accessory (optional).
Pellet replace with a nominal heat output of 8 kW:
A convection air blower is installed. The pellet replace automat-
ically selects an appropriate blower speed based on the heating
output, which always occurs synchronously with the output stage
and cannot be changed.
Frost protection
The frost protection function is activated when the current room
temperature drops below the frost protection temperature which
is set. The combustion process automatically starts for min. 30
minutes. This also occurs in the “O operating state (master switch
must be switched on). As soon as the current room temperature
climbs above the frost protection temperature which is set, the
combustion process is ended again and the system switches back
to the previously selected operating mode. The frost protection
temperature can be set to between 5 °C and 10 °C or “---”. Factory
setting: ---
Night time reduction
(Only in Automatic” mode and with switching times activated.
There is no night time reduction without switching times.)
The night time reduction temperature can be set to between 5 °C
and 20°C or “---”. The factory setting is “---”, i.e. deactivated.
Maximum output
(Only in Automatic” mode) The max. output stage can be set to
between 1 and 5. Factory setting: 5
Standby (only in Automatic” mode)
Standby mode can be switched on and o. With standby mode
switched o, the pellet replace continues heating at the lowest
output stage once the preset room temperature is reached. This
means ignition processes are avoided.
In standby mode, the pellet replace switches o when the room
temperature which is set, plus the switch-o hysteresis (1 °C to 3 °C)
is reached.
See also menu: “O temperature settings.
The temperature at which the pellet replace switches back on
again is set in the Temperature drop settings” menu. If standby
mode is not desired, then the display must be changed to “O.
Factory setting: on
Temperature drop (in Automatic” mode):
The temperature drop describes the switching dierence between
the room temperature which is set and the pellet replace switching
back on in standby mode.
The temperature drop for starting the pellet replace can be set to
between 1 °C and 6 °C. Factory setting: 2 °C
O temperature (in Automatic” mode only)
The switching hysteresis at which the pellet replace switches to
standby mode is set in the “O temperature” menu. The switch-o
hysteresis can be set to between 1 °C and 3°C. Factory setting: 1 °C
Example:
Room temperature set: .............................................................................20 °C
Temperature drop set: ................................................................................. 2 °C
O temperature set: .................................................................................... 1 °C
The pellet replace switches to standby at: .........20 °C + 1 °C = 21 °C
The pellet replace reignites at: ................................. 20 °C – 2 °C = 18 °C
Follow-up
If an external room thermostat is connected, then the follow-up can
be set to between 1 minutes and 9 minutes or to “---”. As a result, the
pellet replace runs for the time dened in the follow-up once the
preset room temperature has been reached in order to avoid and/or
ignore rapid temperature changes and/or external room thermostat
uctuations (e.g. owing to opening a window for a short time).
Factory setting: ---
80
We reserve the right to make technical changes
78-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 8078-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 80 11.04.2023 14:41:5811.04.2023 14:41:58
80

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Olsberg ARINA 2.0 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Olsberg ARINA 2.0 in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 34.97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info