812264
79
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
Operating manual
for the user
LEVANA 2.0 6 kW
LEVANA 2.0 8 kW
LEVANA AQUA 2.0
ARINA 2.0
INARA 2.0
EN
PARTY FUNCTION ON
The party function is switched on by a long press of the
“Party button, i.e. the preset switching times (see Timer
program”) are ignored and the pellet replace heats at the
output stage which is set.
If switched on in the “Heating operation operating state,
the next “switch-o time is ignored, the pellet replace
continues heating. The party function automatically
switches o at the next switch-on time and the pellet re-
place resumes working as programmed.
If switched on in the “Ready operating state, the “switch-
o time” which has already occurred is ignored and the
pellet replace ignites in order to start heating operation.
The party function automatically switches o at the next
switch-on time and the pellet replace resumes working
as programmed.
PARTY FUNCTION OFF
The party function can be manually switched o by press-
ing the “Party button again.
Operating state display
SWITCHED OFF
The pellet replace is switched o by pressing the “ON/
OFF button. Automatic start (heating operation) cannot
occur in this operating state. Exception: frost protection
(see “Frost protection chapter)
READY
Heating is enabled by pressing the “ON/OFF button. Since
all of the conditions for starting the combustion process
are not met, the ignition process is not started. Instead, the
pellet replace is put into the “Ready operating state. The
following conditions must be met to directly start the igni-
tion process:
- No outstanding error message
- Combustion chamber door closed
- Pellet reservoir cover closed
- No relay test is currently being performed (service)
- Flame temperature has cooled to below 100 °C
- The connected external room temperature sensor
contact is closed.
-
The room temperature has dropped to the set value.
- The current time is within the switching time
(with switching time active).
IGNITION
The pellets are automatically deposited in the burner
trough and ignited. Ignition takes longer during initial
commissioning because the screw conveyor is lled with
pellets rst. An extended special ignition program is
started after an error message.
START
The pellet volume is steadily increased until the maximum
output stage is reached.
HEATING OPERATION
The pellet replace heats to the output stage which is set.
CLEANING
Minor cleaning:
“Minor cleaning” is carried out every hour
takes a short time. The screw motor is switched o and the
ue exhauster runs at maximum speed. The burner trough is
thus cleaned. Heating operation automatically continues.
Major cleaning:
“Major cleaning” is carried out every eight
hours. Here, the combustion process is stopped. The screw
motor is switched o and the ue exhauster runs at maximum
speed. The burner trough is thus cleaned. “Major cleaning” lasts
until the ame temperature has cooled to below 100 °C. The
combustion process automatically restarts.
BURNOUT
The combustion process is ended. After burnout, the
pellet replace is in “O mode. The “ON/OFF button must
be pressed to resume heating operation. If timer times are
set, then the pellet replace goes to ready. This requires
the pellet replace to have been started or put into ready
mode with the on button for the rst time.
“MENU” display
Ready
08:17
Desired °C
25
Party
Abb. 3.16 Touch-Bedienfeld - Anzeige MENÜ
Operating keys in the “MENU” display
WIFI
Selection options: WI-FI ON/OFF;
WI-FI settings; app settings
GENERAL INFORMATION
Software version;
Maintenance interval; Operating hours;
External requirements
GENERAL SETTINGS
Convection air blower; Frost protection;
Night time reduction; Max. output; Temperature drop;
Temperature OFF; Follow-up; Other settings (operating
modes, language settings, timer programs, date/time)
We reserve the right to make technical changes
79
78-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 7978-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 79 11.04.2023 14:41:5811.04.2023 14:41:58
79

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Olsberg ARINA 2.0 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Olsberg ARINA 2.0 in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 34.97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info