663190
11
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
EN
EN
Removing the Brake
Conguration
Remove the rear wheel per Section 3.
Removing Roller Brake Hardware
fRemove left hand axle nut (1), left
hand no-turn washer (2), and left
hand nut (3).
fSecure the wheel and use Nu-
Vinci service tool N360-BKAD-01
to remove the brake lock ring
(6), and remove the roller brake
adapter (7) from the hub.
Removing Rim Brake Hardware
fRemove left hand axle nut (1), left
hand no-turn washer (2), left hand
nut (3), and cupped washer (4).
fUsing a thin at device, pry and
remove the rim brake cover (5).
Removing Disc Brake Hardware
fRemove left hand axle nut (1), left
hand no-turn washer (2), left hand
nut (3), and cupped washer (4).
fSecure the wheel and use
NuVinci tool N360-BKAD-01 to
remove the brake lock ring (6),
and remove both the brake shield
(8) and disc brake adapter (9)
from the hub.
Installing the Brake
Conguration
Installing Roller Brake Hardware
fInstall the roller brake adapter (7)
and apply a high strength thread
locking compound (equivalent
to Loctite® 277™) around one
complete thread of the brake lock
ring (6).
fUsing NuVinci service tool N360-
BKAD-01, install and torque the
brake lock ring (6) to 55-65 Nm
(41-48 ft-lbs).
fAfter installing roller brake, install
and torque left hand nut (3) to
30-35 Nm (22-26 ft-lbs).
Installing
Rim Brake Hardware
fPress rim brake cover (5) into po-
sition until it seats fully, followed
by the cupped washer (4).
fInstall and torque left hand nut (3)
to 30-35 Nm (22-26 ft-lbs).
Installing
Disc Brake Hardware
fInstall the disc brake adapter (9)
and brake shield (8) and applya
high strength thread locking
compound (equivalent to Loctite®
277™) around one complete
thread of the brake lock ring (6).
fUsing NuVinci tool N360-
BKAD-01, install and torque the
brake lock ring (6) to 55-65 Nm
(41-48 ft-lbs).
fInstall and torque left hand nut (3)
to 30-35 Nm (22-26 ft-lbs).
5. SERVICE INSTRUCTIONS
19
20
N360 Specications
Hub Colors Silver or Black
Spoke Configurations 32 or 36 Hole
Brake Configurations Disc, Rim or Roller
Speed Ratio Infinitely Variable
within Ratio Range
Ratio Range 360% Nominal
(0.5 Underdrive to
1.8 Overdrive)
Shifting Variable Twist Grip,
3/4 Turn
Drop-Out Width 135 mm, Horizontal
or Vertical
Axle Length 183 mm
Axle Threads M10x1
Chainline 49.0 ± 0.5 mm
Beltline 45.5 ± 0.5 mm
Sprockets
16-22 Tooth Supported
(
standard 9-spline, not included)
Sprocket Ratio 1.8:1 Minimum
(16/29, 17/31, 18/33, 19/35, 20/36,
21/38, 22/40,
larger front chainrings
can be used without exception)
Spoke Flange Diameter 125.0 mm
Center to Left Spoke Flange
26.0 mm
Center to Right Spoke Flange
26.0 mm
For the most up-to-date NuVinci
N360 CVP Owner and Technical
Manuals please visit us online at
www.nuvinci.com/support
6. TECHNICAL DATA
fReference Exploded Diagram P.21 fReference Exploded Diagram P.21
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw NuVinci N 360 - 2012 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van NuVinci N 360 - 2012 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van NuVinci N 360 - 2012

NuVinci N 360 - 2012 Gebruiksaanwijzing - Nederlands - 15 pagina's

NuVinci N 360 - 2012 Gebruiksaanwijzing - Deutsch - 15 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info