2.2. The most important controls
Your NIVONA coffee maker offers a variety of options to brew coffee according to your individual
needs. The main controls and how to use them are identical for most of the coffee specialities.
• Rotary-Push-Turn-Switch (short: rotary control) (g. 1/B): By turning the rotary control the set
value is altered. By pressing the rotary control the set value is conrmed.
• Button > (g. 1/C): By pushing button > the menu moves onto the next item.
• Exit button (g. 1/D): By pushing the exit button you leave the respective menu and move back
one menu level. A coffee making process that has been started can be cancelled by pushing the
exit button.
• Height adjustable spout (g. 1/E): The spout can be adjusted to the height of your cups and
glasses by pushing it up or down.
2.3. Filling with water and beans
Open the cover on the left (g. 1/F) and remove the water tank (g. 2). Clean it with clear, cold
tap water.
Rell the water tank to maximum and insert it back in the appliance. Make sure the tank is safely
locked in place.
Attention: Only use clear, cold water for the water tank! Never use sparkling water or any other liquids!
Non-compliance will render warranty claims void.
Firstly open the appliance cover on the right (g. 1/G) and then the bean container’s cover (g. 3).
Fill with untreated, roasted coffee beans only.
Close both covers again.
Attention: Never use beans that have been treated during or after roasting with supplements like sugar
or similar. This may cause damages to the mill. Resulting repairs are not covered by the warranty.
2.4. Switching appliance on and performing initial start
Switch the appliance on with the on/off switch (g. 1/H).
Please set the following basic settings before you start brewing your rst coffee:
Setting the language
Turn the rotary control to select your language.
Press the rotary control to conrm your setting.
The display will now ask “INSERT FILTER?”
2.4.1. Using the appliance with lter
Included in the box contents is a Claris lter. When using this lter, the appliance needs to be
descaled less frequently as it softens the water.
Turn the rotary control to “INSERT FILTER? YES” for the appliance to recognize that a lter is in
use.
Press the rotary control. The display shows “INSERT FILTER”.
Empty the water tank (g. 1/F and 2) and carefully screw the lter into the respective slot in the
water tank, using the integrated tool at the end of the measuring spoon (g. 4).
Attention: Do not overtighten or break.
Fill the tank with fresh water and insert it back into the appliance.
Place a sufciently large bowl (minimum contents 0.5 l) under the spout (g. 1/E) and press the
rotary control.
The system is now being ushed. The display shows “FILTER FLUSHES”.
Wait until no more water emerges from the spout.
The display shows “NIVONA”.
• Please use the integrated coffee grinder for roasted and untreated beans only,
never for other foodstuffs! Please make sure there are no foreign substances
among the coffee beans - failing this warranty claims will become void.
• If repair services are required, including replacement of the power cord, please
rst contact your dealer or the service-hotline. Afterwards send the machine
to the dealer from whom it was purchased – or to NIVONA national customer
services.
• If the appliance’s power cable is damaged, it must be replaced by the manufac-
turer, its customer service or a similarly qualied person to avoid danger.
Attention: Repairs to electrical appliances must only be undertaken by a pro-
fessional! Improper repairs may result in severe danger for the user! Should
the appliance be used or maintained improperly or incorrect, the warranty
shall become void!
Attention: Using the on/off switch (g.1/J) during the brewing process may
damage the appliance! Turn the appliance off only after it has nished the
job.
Attention: Risk of burning! When drawing steam or hot water, a shot of hot
water may spray from the coffee spout. Allow the spout to cool down before
you touch it.
2. Initial start-up
2.1. Getting started
Unpack the appliance and all items belonging to it with care.
The following are included in the package contents:
• User Manual
• Warranty card
• Measuring spoon with assembly instruction for lter insert
• Two cleaning tabs
• One Claris lter
• One testing strip for water hardness
• One milk cooler (stainless steel: model 858; synthetic: model 848)
Note: In case of customer service being required, the appliance should be shipped in its original pack-
aging. Please keep this safe, including the polystyrene parts.
Place the appliance on a at, dry and suitable surface.
Plug the power cord into a professionally installed mains socket.
Your appliance has a power cord bay – if the cable is too long, place the excessive length in the
power cord bay at the back (g. 1/T)
38 39
2. Initial start-up1. Safety information / 2. Initial start-up
